WSL2-Linux-Kernel/drivers/clk/ingenic/x1830-cgu.c

462 строки
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* X1830 SoC CGU driver
* Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
*/
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
#include <dt-bindings/clock/ingenic,x1830-cgu.h>
#include "cgu.h"
#include "pm.h"
/* CGU register offsets */
#define CGU_REG_CPCCR 0x00
#define CGU_REG_CPPCR 0x0c
#define CGU_REG_APLL 0x10
#define CGU_REG_MPLL 0x14
#define CGU_REG_CLKGR0 0x20
#define CGU_REG_OPCR 0x24
#define CGU_REG_CLKGR1 0x28
#define CGU_REG_DDRCDR 0x2c
#define CGU_REG_USBPCR 0x3c
#define CGU_REG_USBRDT 0x40
#define CGU_REG_USBVBFIL 0x44
#define CGU_REG_USBPCR1 0x48
#define CGU_REG_MACCDR 0x54
#define CGU_REG_EPLL 0x58
#define CGU_REG_I2SCDR 0x60
#define CGU_REG_LPCDR 0x64
#define CGU_REG_MSC0CDR 0x68
#define CGU_REG_I2SCDR1 0x70
#define CGU_REG_SSICDR 0x74
#define CGU_REG_CIMCDR 0x7c
#define CGU_REG_MSC1CDR 0xa4
#define CGU_REG_CMP_INTR 0xb0
#define CGU_REG_CMP_INTRE 0xb4
#define CGU_REG_DRCG 0xd0
#define CGU_REG_CPCSR 0xd4
#define CGU_REG_VPLL 0xe0
#define CGU_REG_MACPHYC 0xe8
/* bits within the OPCR register */
#define OPCR_GATE_USBPHYCLK BIT(23)
#define OPCR_SPENDN0 BIT(7)
#define OPCR_SPENDN1 BIT(6)
/* bits within the USBPCR register */
#define USBPCR_SIDDQ BIT(21)
#define USBPCR_OTG_DISABLE BIT(20)
static struct ingenic_cgu *cgu;
static int x1830_usb_phy_enable(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
void __iomem *reg_usbpcr = cgu->base + CGU_REG_USBPCR;
writel((readl(reg_opcr) | OPCR_SPENDN0) & ~OPCR_GATE_USBPHYCLK, reg_opcr);
writel(readl(reg_usbpcr) & ~USBPCR_OTG_DISABLE & ~USBPCR_SIDDQ, reg_usbpcr);
return 0;
}
static void x1830_usb_phy_disable(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
void __iomem *reg_usbpcr = cgu->base + CGU_REG_USBPCR;
writel((readl(reg_opcr) & ~OPCR_SPENDN0) | OPCR_GATE_USBPHYCLK, reg_opcr);
writel(readl(reg_usbpcr) | USBPCR_OTG_DISABLE | USBPCR_SIDDQ, reg_usbpcr);
}
static int x1830_usb_phy_is_enabled(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
void __iomem *reg_usbpcr = cgu->base + CGU_REG_USBPCR;
return (readl(reg_opcr) & OPCR_SPENDN0) &&
!(readl(reg_usbpcr) & USBPCR_SIDDQ) &&
!(readl(reg_usbpcr) & USBPCR_OTG_DISABLE);
}
static const struct clk_ops x1830_otg_phy_ops = {
.enable = x1830_usb_phy_enable,
.disable = x1830_usb_phy_disable,
.is_enabled = x1830_usb_phy_is_enabled,
};
static const s8 pll_od_encoding[64] = {
0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
-1, -1, -1, -1, -1, -1, -1, 0x4,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, 0x5,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, 0x6,
};
static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
/* External clocks */
[X1830_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
[X1830_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
/* PLLs */
[X1830_CLK_APLL] = {
"apll", CGU_CLK_PLL,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.pll = {
.reg = CGU_REG_APLL,
.rate_multiplier = 2,
.m_shift = 20,
.m_bits = 9,
.m_offset = 1,
.n_shift = 14,
.n_bits = 6,
.n_offset = 1,
.od_shift = 11,
.od_bits = 3,
.od_max = 64,
.od_encoding = pll_od_encoding,
.bypass_reg = CGU_REG_CPPCR,
.bypass_bit = 30,
.enable_bit = 0,
.stable_bit = 3,
},
},
[X1830_CLK_MPLL] = {
"mpll", CGU_CLK_PLL,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.pll = {
.reg = CGU_REG_MPLL,
.rate_multiplier = 2,
.m_shift = 20,
.m_bits = 9,
.m_offset = 1,
.n_shift = 14,
.n_bits = 6,
.n_offset = 1,
.od_shift = 11,
.od_bits = 3,
.od_max = 64,
.od_encoding = pll_od_encoding,
.bypass_reg = CGU_REG_CPPCR,
.bypass_bit = 28,
.enable_bit = 0,
.stable_bit = 3,
},
},
[X1830_CLK_EPLL] = {
"epll", CGU_CLK_PLL,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.pll = {
.reg = CGU_REG_EPLL,
.rate_multiplier = 2,
.m_shift = 20,
.m_bits = 9,
.m_offset = 1,
.n_shift = 14,
.n_bits = 6,
.n_offset = 1,
.od_shift = 11,
.od_bits = 3,
.od_max = 64,
.od_encoding = pll_od_encoding,
.bypass_reg = CGU_REG_CPPCR,
.bypass_bit = 24,
.enable_bit = 0,
.stable_bit = 3,
},
},
[X1830_CLK_VPLL] = {
"vpll", CGU_CLK_PLL,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.pll = {
.reg = CGU_REG_VPLL,
.rate_multiplier = 2,
.m_shift = 20,
.m_bits = 9,
.m_offset = 1,
.n_shift = 14,
.n_bits = 6,
.n_offset = 1,
.od_shift = 11,
.od_bits = 3,
.od_max = 64,
.od_encoding = pll_od_encoding,
.bypass_reg = CGU_REG_CPPCR,
.bypass_bit = 26,
.enable_bit = 0,
.stable_bit = 3,
},
},
/* Custom (SoC-specific) OTG PHY */
[X1830_CLK_OTGPHY] = {
"otg_phy", CGU_CLK_CUSTOM,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.custom = { &x1830_otg_phy_ops },
},
/* Muxes & dividers */
[X1830_CLK_SCLKA] = {
"sclk_a", CGU_CLK_MUX,
.parents = { -1, X1830_CLK_EXCLK, X1830_CLK_APLL, -1 },
.mux = { CGU_REG_CPCCR, 30, 2 },
},
[X1830_CLK_CPUMUX] = {
"cpu_mux", CGU_CLK_MUX,
.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
.mux = { CGU_REG_CPCCR, 28, 2 },
},
[X1830_CLK_CPU] = {
"cpu", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
.gate = { CGU_REG_CLKGR1, 15 },
},
[X1830_CLK_L2CACHE] = {
"l2cache", CGU_CLK_DIV,
.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
},
[X1830_CLK_AHB0] = {
"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
.mux = { CGU_REG_CPCCR, 26, 2 },
.div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
},
[X1830_CLK_AHB2PMUX] = {
"ahb2_apb_mux", CGU_CLK_MUX,
.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
.mux = { CGU_REG_CPCCR, 24, 2 },
},
[X1830_CLK_AHB2] = {
"ahb2", CGU_CLK_DIV,
.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
.div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
},
[X1830_CLK_PCLK] = {
"pclk", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
.gate = { CGU_REG_CLKGR1, 14 },
},
[X1830_CLK_DDR] = {
"ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
.mux = { CGU_REG_DDRCDR, 30, 2 },
.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 31 },
},
[X1830_CLK_MAC] = {
"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
X1830_CLK_VPLL, X1830_CLK_EPLL },
.mux = { CGU_REG_MACCDR, 30, 2 },
.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
.gate = { CGU_REG_CLKGR1, 4 },
},
[X1830_CLK_LCD] = {
"lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
X1830_CLK_VPLL, X1830_CLK_EPLL },
.mux = { CGU_REG_LPCDR, 30, 2 },
.div = { CGU_REG_LPCDR, 0, 1, 8, 28, 27, 26 },
.gate = { CGU_REG_CLKGR1, 9 },
},
[X1830_CLK_MSCMUX] = {
"msc_mux", CGU_CLK_MUX,
.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
X1830_CLK_VPLL, X1830_CLK_EPLL },
.mux = { CGU_REG_MSC0CDR, 30, 2 },
},
[X1830_CLK_MSC0] = {
"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 4 },
},
[X1830_CLK_MSC1] = {
"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 5 },
},
[X1830_CLK_SSIPLL] = {
"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
X1830_CLK_VPLL, X1830_CLK_EPLL },
.mux = { CGU_REG_SSICDR, 30, 2 },
.div = { CGU_REG_SSICDR, 0, 1, 8, 28, 27, 26 },
},
[X1830_CLK_SSIPLL_DIV2] = {
"ssi_pll_div2", CGU_CLK_FIXDIV,
.parents = { X1830_CLK_SSIPLL },
.fixdiv = { 2 },
},
[X1830_CLK_SSIMUX] = {
"ssi_mux", CGU_CLK_MUX,
.parents = { X1830_CLK_EXCLK, X1830_CLK_SSIPLL_DIV2, -1, -1 },
.mux = { CGU_REG_SSICDR, 29, 1 },
},
[X1830_CLK_EXCLK_DIV512] = {
"exclk_div512", CGU_CLK_FIXDIV,
.parents = { X1830_CLK_EXCLK },
.fixdiv = { 512 },
},
[X1830_CLK_RTC] = {
"rtc_ercs", CGU_CLK_MUX | CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK_DIV512, X1830_CLK_RTCLK },
.mux = { CGU_REG_OPCR, 2, 1},
.gate = { CGU_REG_CLKGR0, 29 },
},
/* Gate-only clocks */
[X1830_CLK_EMC] = {
"emc", CGU_CLK_GATE,
.parents = { X1830_CLK_AHB2, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 0 },
},
[X1830_CLK_EFUSE] = {
"efuse", CGU_CLK_GATE,
.parents = { X1830_CLK_AHB2, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 1 },
},
[X1830_CLK_OTG] = {
"otg", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 3 },
},
[X1830_CLK_SSI0] = {
"ssi0", CGU_CLK_GATE,
.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 6 },
},
[X1830_CLK_SMB0] = {
"smb0", CGU_CLK_GATE,
.parents = { X1830_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 7 },
},
[X1830_CLK_SMB1] = {
"smb1", CGU_CLK_GATE,
.parents = { X1830_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 8 },
},
[X1830_CLK_SMB2] = {
"smb2", CGU_CLK_GATE,
.parents = { X1830_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 9 },
},
[X1830_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 14 },
},
[X1830_CLK_UART1] = {
"uart1", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 15 },
},
[X1830_CLK_SSI1] = {
"ssi1", CGU_CLK_GATE,
.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 19 },
},
[X1830_CLK_SFC] = {
"sfc", CGU_CLK_GATE,
.parents = { X1830_CLK_SSIPLL, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 20 },
},
[X1830_CLK_PDMA] = {
"pdma", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 21 },
},
[X1830_CLK_TCU] = {
"tcu", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 30 },
},
[X1830_CLK_DTRNG] = {
"dtrng", CGU_CLK_GATE,
.parents = { X1830_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 1 },
},
[X1830_CLK_OST] = {
"ost", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 11 },
},
};
static void __init x1830_cgu_init(struct device_node *np)
{
int retval;
cgu = ingenic_cgu_new(x1830_cgu_clocks,
ARRAY_SIZE(x1830_cgu_clocks), np);
if (!cgu) {
pr_err("%s: failed to initialise CGU\n", __func__);
return;
}
retval = ingenic_cgu_register_clocks(cgu);
if (retval) {
pr_err("%s: failed to register CGU Clocks\n", __func__);
return;
}
ingenic_cgu_register_syscore_ops(cgu);
}
/*
* CGU has some children devices, this is useful for probing children devices
* in the case where the device node is compatible with "simple-mfd".
*/
CLK_OF_DECLARE_DRIVER(x1830_cgu, "ingenic,x1830-cgu", x1830_cgu_init);