137 строки
3.9 KiB
C
137 строки
3.9 KiB
C
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include "usb.h"
|
|
|
|
static int uas_is_interface(struct usb_host_interface *intf)
|
|
{
|
|
return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
|
|
intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
|
|
intf->desc.bInterfaceProtocol == USB_PR_UAS);
|
|
}
|
|
|
|
static int uas_find_uas_alt_setting(struct usb_interface *intf)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < intf->num_altsetting; i++) {
|
|
struct usb_host_interface *alt = &intf->altsetting[i];
|
|
|
|
if (uas_is_interface(alt))
|
|
return alt->desc.bAlternateSetting;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int uas_find_endpoints(struct usb_host_interface *alt,
|
|
struct usb_host_endpoint *eps[])
|
|
{
|
|
struct usb_host_endpoint *endpoint = alt->endpoint;
|
|
unsigned i, n_endpoints = alt->desc.bNumEndpoints;
|
|
|
|
for (i = 0; i < n_endpoints; i++) {
|
|
unsigned char *extra = endpoint[i].extra;
|
|
int len = endpoint[i].extralen;
|
|
while (len >= 3) {
|
|
if (extra[1] == USB_DT_PIPE_USAGE) {
|
|
unsigned pipe_id = extra[2];
|
|
if (pipe_id > 0 && pipe_id < 5)
|
|
eps[pipe_id - 1] = &endpoint[i];
|
|
break;
|
|
}
|
|
len -= extra[0];
|
|
extra += extra[0];
|
|
}
|
|
}
|
|
|
|
if (!eps[0] || !eps[1] || !eps[2] || !eps[3])
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uas_use_uas_driver(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_host_endpoint *eps[4] = { };
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
unsigned long flags = id->driver_info;
|
|
int r, alt;
|
|
|
|
|
|
alt = uas_find_uas_alt_setting(intf);
|
|
if (alt < 0)
|
|
return 0;
|
|
|
|
r = uas_find_endpoints(&intf->altsetting[alt], eps);
|
|
if (r < 0)
|
|
return 0;
|
|
|
|
/*
|
|
* ASMedia has a number of usb3 to sata bridge chips, at the time of
|
|
* this writing the following versions exist:
|
|
* ASM1051 - no uas support version
|
|
* ASM1051 - with broken (*) uas support
|
|
* ASM1053 - with working uas support
|
|
* ASM1153 - with working uas support
|
|
*
|
|
* Devices with these chips re-use a number of device-ids over the
|
|
* entire line, so the device-id is useless to determine if we're
|
|
* dealing with an ASM1051 (which we want to avoid).
|
|
*
|
|
* The ASM1153 can be identified by config.MaxPower == 0,
|
|
* where as the ASM105x models have config.MaxPower == 36.
|
|
*
|
|
* Differentiating between the ASM1053 and ASM1051 is trickier, when
|
|
* connected over USB-3 we can look at the number of streams supported,
|
|
* ASM1051 supports 32 streams, where as early ASM1053 versions support
|
|
* 16 streams, newer ASM1053-s also support 32 streams, but have a
|
|
* different prod-id.
|
|
*
|
|
* (*) ASM1051 chips do work with UAS with some disks (with the
|
|
* US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks
|
|
*/
|
|
if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c &&
|
|
(le16_to_cpu(udev->descriptor.idProduct) == 0x5106 ||
|
|
le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) {
|
|
if (udev->actconfig->desc.bMaxPower == 0) {
|
|
/* ASM1153, do nothing */
|
|
} else if (udev->speed < USB_SPEED_SUPER) {
|
|
/* No streams info, assume ASM1051 */
|
|
flags |= US_FL_IGNORE_UAS;
|
|
} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
|
|
/* Possibly an ASM1051, disable uas */
|
|
flags |= US_FL_IGNORE_UAS;
|
|
}
|
|
}
|
|
|
|
usb_stor_adjust_quirks(udev, &flags);
|
|
|
|
if (flags & US_FL_IGNORE_UAS) {
|
|
dev_warn(&udev->dev,
|
|
"UAS is blacklisted for this device, using usb-storage instead\n");
|
|
return 0;
|
|
}
|
|
|
|
if (udev->bus->sg_tablesize == 0) {
|
|
dev_warn(&udev->dev,
|
|
"The driver for the USB controller %s does not support scatter-gather which is\n",
|
|
hcd->driver->description);
|
|
dev_warn(&udev->dev,
|
|
"required by the UAS driver. Please try an other USB controller if you wish to use UAS.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (udev->speed >= USB_SPEED_SUPER && !hcd->can_do_streams) {
|
|
dev_warn(&udev->dev,
|
|
"USB controller %s does not support streams, which are required by the UAS driver.\n",
|
|
hcd_to_bus(hcd)->bus_name);
|
|
dev_warn(&udev->dev,
|
|
"Please try an other USB controller if you wish to use UAS.\n");
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|