275 строки
8.8 KiB
C
275 строки
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* icom.h
|
|
*
|
|
* Copyright (C) 2001 Michael Anderson, IBM Corporation
|
|
*
|
|
* Serial device driver include file.
|
|
*/
|
|
|
|
#include <linux/serial_core.h>
|
|
|
|
#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1)
|
|
static int icom_acfg_baud[] = {
|
|
300,
|
|
600,
|
|
900,
|
|
1200,
|
|
1800,
|
|
2400,
|
|
3600,
|
|
4800,
|
|
7200,
|
|
9600,
|
|
14400,
|
|
19200,
|
|
28800,
|
|
38400,
|
|
57600,
|
|
76800,
|
|
115200,
|
|
153600,
|
|
230400,
|
|
307200,
|
|
460800,
|
|
};
|
|
|
|
struct icom_regs {
|
|
u32 control; /* Adapter Control Register */
|
|
u32 interrupt; /* Adapter Interrupt Register */
|
|
u32 int_mask; /* Adapter Interrupt Mask Reg */
|
|
u32 int_pri; /* Adapter Interrupt Priority r */
|
|
u32 int_reg_b; /* Adapter non-masked Interrupt */
|
|
u32 resvd01;
|
|
u32 resvd02;
|
|
u32 resvd03;
|
|
u32 control_2; /* Adapter Control Register 2 */
|
|
u32 interrupt_2; /* Adapter Interrupt Register 2 */
|
|
u32 int_mask_2; /* Adapter Interrupt Mask 2 */
|
|
u32 int_pri_2; /* Adapter Interrupt Prior 2 */
|
|
u32 int_reg_2b; /* Adapter non-masked 2 */
|
|
};
|
|
|
|
struct func_dram {
|
|
u32 reserved[108]; /* 0-1B0 reserved by personality code */
|
|
u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */
|
|
u8 RcvStnAddr; /* 1B4 Receive Station Addr */
|
|
u8 IdleState; /* 1B5 Idle State */
|
|
u8 IdleMonitor; /* 1B6 Idle Monitor */
|
|
u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */
|
|
u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */
|
|
u8 StartXmitCmd; /* 1BC Start Xmit Command */
|
|
u8 HDLCConfigReg; /* 1BD Reserved */
|
|
u8 CauseCode; /* 1BE Cause code for fatal error */
|
|
u8 xchar; /* 1BF High priority send */
|
|
u32 reserved3; /* 1C0-1C3 Reserved */
|
|
u8 PrevCmdReg; /* 1C4 Reserved */
|
|
u8 CmdReg; /* 1C5 Command Register */
|
|
u8 async_config2; /* 1C6 Async Config Byte 2 */
|
|
u8 async_config3; /* 1C7 Async Config Byte 3 */
|
|
u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */
|
|
u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */
|
|
u8 misc_flags; /* 1DD misc flags */
|
|
#define V2_HARDWARE 0x40
|
|
#define ICOM_HDW_ACTIVE 0x01
|
|
u8 call_length; /* 1DE Phone #/CFI buff ln */
|
|
u8 call_length2; /* 1DF Upper byte (unused) */
|
|
u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */
|
|
u16 timer_value; /* 1E4-1E5 general timer value */
|
|
u8 timer_command; /* 1E6 general timer cmd */
|
|
u8 dce_command; /* 1E7 dce command reg */
|
|
u8 dce_cmd_status; /* 1E8 dce command stat */
|
|
u8 x21_r1_ioff; /* 1E9 dce ready counter */
|
|
u8 x21_r0_ioff; /* 1EA dce not ready ctr */
|
|
u8 x21_ralt_ioff; /* 1EB dce CNR counter */
|
|
u8 x21_r1_ion; /* 1EC dce ready I on ctr */
|
|
u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */
|
|
u8 ier; /* 1EE Interrupt Enable */
|
|
u8 isr; /* 1EF Input Signal Reg */
|
|
u8 osr; /* 1F0 Output Signal Reg */
|
|
u8 reset; /* 1F1 Reset/Reload Reg */
|
|
u8 disable; /* 1F2 Disable Reg */
|
|
u8 sync; /* 1F3 Sync Reg */
|
|
u8 error_stat; /* 1F4 Error Status */
|
|
u8 cable_id; /* 1F5 Cable ID */
|
|
u8 cs_length; /* 1F6 CS Load Length */
|
|
u8 mac_length; /* 1F7 Mac Load Length */
|
|
u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */
|
|
u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */
|
|
};
|
|
|
|
/*
|
|
* adapter defines and structures
|
|
*/
|
|
#define ICOM_CONTROL_START_A 0x00000008
|
|
#define ICOM_CONTROL_STOP_A 0x00000004
|
|
#define ICOM_CONTROL_START_B 0x00000002
|
|
#define ICOM_CONTROL_STOP_B 0x00000001
|
|
#define ICOM_CONTROL_START_C 0x00000008
|
|
#define ICOM_CONTROL_STOP_C 0x00000004
|
|
#define ICOM_CONTROL_START_D 0x00000002
|
|
#define ICOM_CONTROL_STOP_D 0x00000001
|
|
#define ICOM_IRAM_OFFSET 0x1000
|
|
#define ICOM_IRAM_SIZE 0x0C00
|
|
#define ICOM_DCE_IRAM_OFFSET 0x0A00
|
|
#define ICOM_CABLE_ID_VALID 0x01
|
|
#define ICOM_CABLE_ID_MASK 0xF0
|
|
#define ICOM_DISABLE 0x80
|
|
#define CMD_XMIT_RCV_ENABLE 0xC0
|
|
#define CMD_XMIT_ENABLE 0x40
|
|
#define CMD_RCV_DISABLE 0x00
|
|
#define CMD_RCV_ENABLE 0x80
|
|
#define CMD_RESTART 0x01
|
|
#define CMD_HOLD_XMIT 0x02
|
|
#define CMD_SND_BREAK 0x04
|
|
#define RS232_CABLE 0x06
|
|
#define V24_CABLE 0x0E
|
|
#define V35_CABLE 0x0C
|
|
#define V36_CABLE 0x02
|
|
#define NO_CABLE 0x00
|
|
#define START_DOWNLOAD 0x80
|
|
#define ICOM_INT_MASK_PRC_A 0x00003FFF
|
|
#define ICOM_INT_MASK_PRC_B 0x3FFF0000
|
|
#define ICOM_INT_MASK_PRC_C 0x00003FFF
|
|
#define ICOM_INT_MASK_PRC_D 0x3FFF0000
|
|
#define INT_RCV_COMPLETED 0x1000
|
|
#define INT_XMIT_COMPLETED 0x2000
|
|
#define INT_IDLE_DETECT 0x0800
|
|
#define INT_RCV_DISABLED 0x0400
|
|
#define INT_XMIT_DISABLED 0x0200
|
|
#define INT_RCV_XMIT_SHUTDOWN 0x0100
|
|
#define INT_FATAL_ERROR 0x0080
|
|
#define INT_CABLE_PULL 0x0020
|
|
#define INT_SIGNAL_CHANGE 0x0010
|
|
#define HDLC_PPP_PURE_ASYNC 0x02
|
|
#define HDLC_FF_FILL 0x00
|
|
#define HDLC_HDW_FLOW 0x01
|
|
#define START_XMIT 0x80
|
|
#define ICOM_ACFG_DRIVE1 0x20
|
|
#define ICOM_ACFG_NO_PARITY 0x00
|
|
#define ICOM_ACFG_PARITY_ENAB 0x02
|
|
#define ICOM_ACFG_PARITY_ODD 0x01
|
|
#define ICOM_ACFG_8BPC 0x00
|
|
#define ICOM_ACFG_7BPC 0x04
|
|
#define ICOM_ACFG_6BPC 0x08
|
|
#define ICOM_ACFG_5BPC 0x0C
|
|
#define ICOM_ACFG_1STOP_BIT 0x00
|
|
#define ICOM_ACFG_2STOP_BIT 0x10
|
|
#define ICOM_DTR 0x80
|
|
#define ICOM_RTS 0x40
|
|
#define ICOM_RI 0x08
|
|
#define ICOM_DSR 0x80
|
|
#define ICOM_DCD 0x20
|
|
#define ICOM_CTS 0x40
|
|
|
|
#define NUM_XBUFFS 1
|
|
#define NUM_RBUFFS 2
|
|
#define RCV_BUFF_SZ 0x0200
|
|
#define XMIT_BUFF_SZ 0x1000
|
|
struct statusArea {
|
|
/**********************************************/
|
|
/* Transmit Status Area */
|
|
/**********************************************/
|
|
struct xmit_status_area{
|
|
u32 leNext; /* Next entry in Little Endian on Adapter */
|
|
u32 leNextASD;
|
|
u32 leBuffer; /* Buffer for entry in LE for Adapter */
|
|
u16 leLengthASD;
|
|
u16 leOffsetASD;
|
|
u16 leLength; /* Length of data in segment */
|
|
u16 flags;
|
|
#define SA_FLAGS_DONE 0x0080 /* Done with Segment */
|
|
#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */
|
|
#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */
|
|
#define SA_FLAGS_READY_TO_XMIT 0x0800
|
|
#define SA_FLAGS_STAT_MASK 0x007F
|
|
} xmit[NUM_XBUFFS];
|
|
|
|
/**********************************************/
|
|
/* Receive Status Area */
|
|
/**********************************************/
|
|
struct {
|
|
u32 leNext; /* Next entry in Little Endian on Adapter */
|
|
u32 leNextASD;
|
|
u32 leBuffer; /* Buffer for entry in LE for Adapter */
|
|
u16 WorkingLength; /* size of segment */
|
|
u16 reserv01;
|
|
u16 leLength; /* Length of data in segment */
|
|
u16 flags;
|
|
#define SA_FL_RCV_DONE 0x0010 /* Data ready */
|
|
#define SA_FLAGS_OVERRUN 0x0040
|
|
#define SA_FLAGS_PARITY_ERROR 0x0080
|
|
#define SA_FLAGS_FRAME_ERROR 0x0001
|
|
#define SA_FLAGS_FRAME_TRUNC 0x0002
|
|
#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */
|
|
#define SA_FLAGS_RCV_MASK 0xFFE6
|
|
} rcv[NUM_RBUFFS];
|
|
};
|
|
|
|
struct icom_adapter;
|
|
|
|
|
|
#define ICOM_MAJOR 243
|
|
#define ICOM_MINOR_START 0
|
|
|
|
struct icom_port {
|
|
struct uart_port uart_port;
|
|
u8 imbed_modem;
|
|
#define ICOM_UNKNOWN 1
|
|
#define ICOM_RVX 2
|
|
#define ICOM_IMBED_MODEM 3
|
|
unsigned char cable_id;
|
|
unsigned char read_status_mask;
|
|
unsigned char ignore_status_mask;
|
|
void __iomem * int_reg;
|
|
struct icom_regs __iomem *global_reg;
|
|
struct func_dram __iomem *dram;
|
|
int port;
|
|
struct statusArea *statStg;
|
|
dma_addr_t statStg_pci;
|
|
u32 *xmitRestart;
|
|
dma_addr_t xmitRestart_pci;
|
|
unsigned char *xmit_buf;
|
|
dma_addr_t xmit_buf_pci;
|
|
unsigned char *recv_buf;
|
|
dma_addr_t recv_buf_pci;
|
|
int next_rcv;
|
|
int put_length;
|
|
int status;
|
|
#define ICOM_PORT_ACTIVE 1 /* Port exists. */
|
|
#define ICOM_PORT_OFF 0 /* Port does not exist. */
|
|
int load_in_progress;
|
|
struct icom_adapter *adapter;
|
|
};
|
|
|
|
struct icom_adapter {
|
|
void __iomem * base_addr;
|
|
unsigned long base_addr_pci;
|
|
struct pci_dev *pci_dev;
|
|
struct icom_port port_info[4];
|
|
int index;
|
|
int version;
|
|
#define ADAPTER_V1 0x0001
|
|
#define ADAPTER_V2 0x0002
|
|
u32 subsystem_id;
|
|
#define FOUR_PORT_MODEL 0x0252
|
|
#define V2_TWO_PORTS_RVX 0x021A
|
|
#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251
|
|
int numb_ports;
|
|
struct list_head icom_adapter_entry;
|
|
struct kref kref;
|
|
};
|
|
|
|
/* prototype */
|
|
extern void iCom_sercons_init(void);
|
|
|
|
struct lookup_proc_table {
|
|
u32 __iomem *global_control_reg;
|
|
unsigned long processor_id;
|
|
};
|
|
|
|
struct lookup_int_table {
|
|
u32 __iomem *global_int_mask;
|
|
unsigned long processor_id;
|
|
};
|