NeilBrown 3ea7daa5d7 md/raid10: add reshape support ... A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>		2012-05-22 13:53:47 +10:00
..
persistent-data	dm persistent data: remove space map ref_count entries if redundant	2012-03-28 18:41:27 +01:00
Kconfig	dm: add verity target	2012-03-28 18:43:38 +01:00
Makefile	dm: add verity target	2012-03-28 18:43:38 +01:00
bitmap.c	md/bitmap: fix calculation of 'chunks' - missing shift.	2012-05-04 17:03:18 +10:00
bitmap.h	md/bitmap: fix calculation of 'chunks' - missing shift.	2012-05-04 17:03:18 +10:00
dm-bio-record.h	dm: preserve bi_io_vec when resubmitting bios	2009-04-02 19:55:23 +01:00
dm-bufio.c	dm bufio: prefetch	2012-03-28 18:41:29 +01:00
dm-bufio.h	dm bufio: prefetch	2012-03-28 18:41:29 +01:00
dm-crypt.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-delay.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-exception-store.c	dm exception store: fix init error path	2012-03-28 18:41:22 +01:00
dm-exception-store.h	dm snapshot: test chunk size against both origin and snapshot	2010-08-12 04:13:51 +01:00
dm-flakey.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-io.c	dm io: fix discard support	2012-03-07 19:09:37 +00:00
dm-ioctl.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-kcopyd.c	dm kcopyd: add dm_kcopyd_zero to zero an area	2011-10-31 20:18:58 +00:00
dm-linear.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-log-userspace-base.c	Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux	2011-11-06 19:44:47 -08:00
dm-log-userspace-transfer.c	netlink: kill eff_cap from struct netlink_skb_parms	2011-03-03 13:32:07 -08:00
dm-log-userspace-transfer.h	dm log: userspace add luid to distinguish between concurrent log instances	2009-09-04 20:40:34 +01:00
dm-log.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-mpath.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-mpath.h	dm mpath: remove is_active from struct dm_path	2008-10-10 13:36:58 +01:00
dm-path-selector.c	md: Add module.h to all files using it implicitly	2011-10-31 19:31:18 -04:00
dm-path-selector.h	dm mpath: add start_io and nr_bytes to path selectors	2009-06-22 10:12:27 +01:00
dm-queue-length.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-raid.c	DM RAID: Use safe version of rdev_for_each	2012-04-24 10:23:13 +10:00
dm-raid1.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-region-hash.c	Fix common misspellings	2011-03-31 11:26:23 -03:00
dm-round-robin.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-service-time.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-snap-persistent.c	md: Add in export.h for files using EXPORT_SYMBOL	2011-10-31 19:31:19 -04:00
dm-snap-transient.c	md: Add in export.h for files using EXPORT_SYMBOL	2011-10-31 19:31:19 -04:00
dm-snap.c	dm snapshot: skip reading origin when overwriting complete chunk	2011-08-02 12:32:04 +01:00
dm-stripe.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-sysfs.c	Driver core: Constify struct sysfs_ops in struct kobj_type	2010-03-07 17:04:49 -08:00
dm-table.c	dm: reject trailing characters in sccanf input	2012-03-28 18:41:26 +01:00
dm-target.c	dm: error return error for discards	2010-08-12 04:14:14 +01:00
dm-thin-metadata.c	dm thin: relax hard limit on the maximum size of a metadata device	2012-03-28 18:41:28 +01:00
dm-thin-metadata.h	dm thin: relax hard limit on the maximum size of a metadata device	2012-03-28 18:41:28 +01:00
dm-thin.c	dm thin: add pool target flags to control discard	2012-03-28 18:41:29 +01:00
dm-uevent.c	md: Add in export.h for files using EXPORT_SYMBOL	2011-10-31 19:31:19 -04:00
dm-uevent.h	dm: uevent generate events	2007-10-20 02:01:26 +01:00
dm-verity.c	dm: add verity target	2012-03-28 18:43:38 +01:00
dm-zero.c	dm: zero silently drop discards	2010-08-12 04:14:12 +01:00
dm.c	dm: clear bi_end_io on remapping failure	2012-03-28 18:41:25 +01:00
dm.h	dm table: add immutable feature	2011-10-31 20:19:04 +00:00
faulty.c	md: tidy up rdev_for_each usage.	2012-03-19 12:46:39 +11:00
linear.c	md/linear: If md_integrity_register() fails, linear_run() must free the mem.	2012-04-02 09:48:37 +10:00
linear.h	md/linear: typedef removal: linear_conf_t -> struct linear_conf	2011-10-11 16:48:54 +11:00
md.c	md: use resync_max_sectors for reshape as well as resync.	2012-05-21 09:28:33 +10:00
md.h	md: add possibility to change data-offset for devices.	2012-05-21 09:27:00 +10:00
multipath.c	md: tidy up rdev_for_each usage.	2012-03-19 12:46:39 +11:00
multipath.h	md/multipath: typedef removal: multipath_conf_t -> struct mpconf	2011-10-11 16:48:57 +11:00
raid0.c	md: Avoid OOPS when reshaping raid1 to raid0	2012-04-03 15:37:26 +10:00
raid0.h	md: add proper merge_bvec handling to RAID0 and Linear.	2012-03-19 12:46:39 +11:00
raid1.c	md: add possibility to change data-offset for devices.	2012-05-21 09:27:00 +10:00
raid1.h	md/raid1: Allocate spare to store replacement devices and their bios.	2011-12-23 10:17:56 +11:00
raid5.c	md/raid5: allow for change in data_offset while managing a reshape.	2012-05-21 09:27:01 +10:00
raid5.h	md/raid5: allow for change in data_offset while managing a reshape.	2012-05-21 09:27:01 +10:00
raid10.c	md/raid10: add reshape support	2012-05-22 13:53:47 +10:00
raid10.h	md/raid10: add reshape support	2012-05-22 13:53:47 +10:00