528 строки
12 KiB
C
528 строки
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2017 Sanechips Technology Co., Ltd.
|
|
* Copyright 2017 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/component.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_print.h>
|
|
#include <drm/drm_probe_helper.h>
|
|
#include <drm/drm_simple_kms_helper.h>
|
|
|
|
#include "zx_drm_drv.h"
|
|
#include "zx_vga_regs.h"
|
|
#include "zx_vou.h"
|
|
|
|
struct zx_vga_pwrctrl {
|
|
struct regmap *regmap;
|
|
u32 reg;
|
|
u32 mask;
|
|
};
|
|
|
|
struct zx_vga_i2c {
|
|
struct i2c_adapter adap;
|
|
struct mutex lock;
|
|
};
|
|
|
|
struct zx_vga {
|
|
struct drm_connector connector;
|
|
struct drm_encoder encoder;
|
|
struct zx_vga_i2c *ddc;
|
|
struct device *dev;
|
|
void __iomem *mmio;
|
|
struct clk *i2c_wclk;
|
|
struct zx_vga_pwrctrl pwrctrl;
|
|
struct completion complete;
|
|
bool connected;
|
|
};
|
|
|
|
#define to_zx_vga(x) container_of(x, struct zx_vga, x)
|
|
|
|
static void zx_vga_encoder_enable(struct drm_encoder *encoder)
|
|
{
|
|
struct zx_vga *vga = to_zx_vga(encoder);
|
|
struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl;
|
|
|
|
/* Set bit to power up VGA DACs */
|
|
regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask,
|
|
pwrctrl->mask);
|
|
|
|
vou_inf_enable(VOU_VGA, encoder->crtc);
|
|
}
|
|
|
|
static void zx_vga_encoder_disable(struct drm_encoder *encoder)
|
|
{
|
|
struct zx_vga *vga = to_zx_vga(encoder);
|
|
struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl;
|
|
|
|
vou_inf_disable(VOU_VGA, encoder->crtc);
|
|
|
|
/* Clear bit to power down VGA DACs */
|
|
regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask, 0);
|
|
}
|
|
|
|
static const struct drm_encoder_helper_funcs zx_vga_encoder_helper_funcs = {
|
|
.enable = zx_vga_encoder_enable,
|
|
.disable = zx_vga_encoder_disable,
|
|
};
|
|
|
|
static int zx_vga_connector_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct zx_vga *vga = to_zx_vga(connector);
|
|
struct edid *edid;
|
|
int ret;
|
|
|
|
/*
|
|
* Clear both detection bits to switch I2C bus from device
|
|
* detecting to EDID reading.
|
|
*/
|
|
zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, 0);
|
|
|
|
edid = drm_get_edid(connector, &vga->ddc->adap);
|
|
if (!edid) {
|
|
/*
|
|
* If EDID reading fails, we set the device state into
|
|
* disconnected. Locking is not required here, since the
|
|
* VGA_AUTO_DETECT_SEL register write in irq handler cannot
|
|
* be triggered when both detection bits are cleared as above.
|
|
*/
|
|
zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL,
|
|
VGA_DETECT_SEL_NO_DEVICE);
|
|
vga->connected = false;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* As edid reading succeeds, device must be connected, so we set
|
|
* up detection bit for unplug interrupt here.
|
|
*/
|
|
zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, VGA_DETECT_SEL_HAS_DEVICE);
|
|
|
|
drm_connector_update_edid_property(connector, edid);
|
|
ret = drm_add_edid_modes(connector, edid);
|
|
kfree(edid);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum drm_mode_status
|
|
zx_vga_connector_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
return MODE_OK;
|
|
}
|
|
|
|
static struct drm_connector_helper_funcs zx_vga_connector_helper_funcs = {
|
|
.get_modes = zx_vga_connector_get_modes,
|
|
.mode_valid = zx_vga_connector_mode_valid,
|
|
};
|
|
|
|
static enum drm_connector_status
|
|
zx_vga_connector_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct zx_vga *vga = to_zx_vga(connector);
|
|
|
|
return vga->connected ? connector_status_connected :
|
|
connector_status_disconnected;
|
|
}
|
|
|
|
static const struct drm_connector_funcs zx_vga_connector_funcs = {
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.detect = zx_vga_connector_detect,
|
|
.destroy = drm_connector_cleanup,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static int zx_vga_register(struct drm_device *drm, struct zx_vga *vga)
|
|
{
|
|
struct drm_encoder *encoder = &vga->encoder;
|
|
struct drm_connector *connector = &vga->connector;
|
|
struct device *dev = vga->dev;
|
|
int ret;
|
|
|
|
encoder->possible_crtcs = VOU_CRTC_MASK;
|
|
|
|
ret = drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_DAC);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to init encoder: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
drm_encoder_helper_add(encoder, &zx_vga_encoder_helper_funcs);
|
|
|
|
vga->connector.polled = DRM_CONNECTOR_POLL_HPD;
|
|
|
|
ret = drm_connector_init_with_ddc(drm, connector,
|
|
&zx_vga_connector_funcs,
|
|
DRM_MODE_CONNECTOR_VGA,
|
|
&vga->ddc->adap);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to init connector: %d\n", ret);
|
|
goto clean_encoder;
|
|
}
|
|
|
|
drm_connector_helper_add(connector, &zx_vga_connector_helper_funcs);
|
|
|
|
ret = drm_connector_attach_encoder(connector, encoder);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to attach encoder: %d\n", ret);
|
|
goto clean_connector;
|
|
}
|
|
|
|
return 0;
|
|
|
|
clean_connector:
|
|
drm_connector_cleanup(connector);
|
|
clean_encoder:
|
|
drm_encoder_cleanup(encoder);
|
|
return ret;
|
|
}
|
|
|
|
static int zx_vga_pwrctrl_init(struct zx_vga *vga)
|
|
{
|
|
struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl;
|
|
struct device *dev = vga->dev;
|
|
struct of_phandle_args out_args;
|
|
struct regmap *regmap;
|
|
int ret;
|
|
|
|
ret = of_parse_phandle_with_fixed_args(dev->of_node,
|
|
"zte,vga-power-control", 2, 0, &out_args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regmap = syscon_node_to_regmap(out_args.np);
|
|
if (IS_ERR(regmap)) {
|
|
ret = PTR_ERR(regmap);
|
|
goto out;
|
|
}
|
|
|
|
pwrctrl->regmap = regmap;
|
|
pwrctrl->reg = out_args.args[0];
|
|
pwrctrl->mask = out_args.args[1];
|
|
|
|
out:
|
|
of_node_put(out_args.np);
|
|
return ret;
|
|
}
|
|
|
|
static int zx_vga_i2c_read(struct zx_vga *vga, struct i2c_msg *msg)
|
|
{
|
|
int len = msg->len;
|
|
u8 *buf = msg->buf;
|
|
u32 offset = 0;
|
|
int i;
|
|
|
|
reinit_completion(&vga->complete);
|
|
|
|
/* Select combo write */
|
|
zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_COMBO, VGA_CMD_COMBO);
|
|
zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_RW, 0);
|
|
|
|
while (len > 0) {
|
|
u32 cnt;
|
|
|
|
/* Clear RX FIFO */
|
|
zx_writel_mask(vga->mmio + VGA_RXF_CTRL, VGA_RX_FIFO_CLEAR,
|
|
VGA_RX_FIFO_CLEAR);
|
|
|
|
/* Data offset to read from */
|
|
zx_writel(vga->mmio + VGA_SUB_ADDR, offset);
|
|
|
|
/* Kick off the transfer */
|
|
zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_TRANS,
|
|
VGA_CMD_TRANS);
|
|
|
|
if (!wait_for_completion_timeout(&vga->complete,
|
|
msecs_to_jiffies(1000))) {
|
|
DRM_DEV_ERROR(vga->dev, "transfer timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
cnt = zx_readl(vga->mmio + VGA_RXF_STATUS);
|
|
cnt = (cnt & VGA_RXF_COUNT_MASK) >> VGA_RXF_COUNT_SHIFT;
|
|
/* FIFO status may report more data than we need to read */
|
|
cnt = min_t(u32, len, cnt);
|
|
|
|
for (i = 0; i < cnt; i++)
|
|
*buf++ = zx_readl(vga->mmio + VGA_DATA);
|
|
|
|
len -= cnt;
|
|
offset += cnt;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zx_vga_i2c_write(struct zx_vga *vga, struct i2c_msg *msg)
|
|
{
|
|
/*
|
|
* The DDC I2C adapter is only for reading EDID data, so we assume
|
|
* that the write to this adapter must be the EDID data offset.
|
|
*/
|
|
if ((msg->len != 1) || ((msg->addr != DDC_ADDR)))
|
|
return -EINVAL;
|
|
|
|
/* Hardware will take care of the slave address shifting */
|
|
zx_writel(vga->mmio + VGA_DEVICE_ADDR, msg->addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zx_vga_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct zx_vga *vga = i2c_get_adapdata(adap);
|
|
struct zx_vga_i2c *ddc = vga->ddc;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
mutex_lock(&ddc->lock);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
if (msgs[i].flags & I2C_M_RD)
|
|
ret = zx_vga_i2c_read(vga, &msgs[i]);
|
|
else
|
|
ret = zx_vga_i2c_write(vga, &msgs[i]);
|
|
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
|
|
if (!ret)
|
|
ret = num;
|
|
|
|
mutex_unlock(&ddc->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 zx_vga_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm zx_vga_algorithm = {
|
|
.master_xfer = zx_vga_i2c_xfer,
|
|
.functionality = zx_vga_i2c_func,
|
|
};
|
|
|
|
static int zx_vga_ddc_register(struct zx_vga *vga)
|
|
{
|
|
struct device *dev = vga->dev;
|
|
struct i2c_adapter *adap;
|
|
struct zx_vga_i2c *ddc;
|
|
int ret;
|
|
|
|
ddc = devm_kzalloc(dev, sizeof(*ddc), GFP_KERNEL);
|
|
if (!ddc)
|
|
return -ENOMEM;
|
|
|
|
vga->ddc = ddc;
|
|
mutex_init(&ddc->lock);
|
|
|
|
adap = &ddc->adap;
|
|
adap->owner = THIS_MODULE;
|
|
adap->class = I2C_CLASS_DDC;
|
|
adap->dev.parent = dev;
|
|
adap->algo = &zx_vga_algorithm;
|
|
snprintf(adap->name, sizeof(adap->name), "zx vga i2c");
|
|
|
|
ret = i2c_add_adapter(adap);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to add I2C adapter: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_adapdata(adap, vga);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t zx_vga_irq_thread(int irq, void *dev_id)
|
|
{
|
|
struct zx_vga *vga = dev_id;
|
|
|
|
drm_helper_hpd_irq_event(vga->connector.dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t zx_vga_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct zx_vga *vga = dev_id;
|
|
u32 status;
|
|
|
|
status = zx_readl(vga->mmio + VGA_I2C_STATUS);
|
|
|
|
/* Clear interrupt status */
|
|
zx_writel_mask(vga->mmio + VGA_I2C_STATUS, VGA_CLEAR_IRQ,
|
|
VGA_CLEAR_IRQ);
|
|
|
|
if (status & VGA_DEVICE_CONNECTED) {
|
|
/*
|
|
* Since VGA_DETECT_SEL bits need to be reset for switching DDC
|
|
* bus from device detection to EDID read, rather than setting
|
|
* up HAS_DEVICE bit here, we need to do that in .get_modes
|
|
* hook for unplug detecting after EDID read succeeds.
|
|
*/
|
|
vga->connected = true;
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
if (status & VGA_DEVICE_DISCONNECTED) {
|
|
zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL,
|
|
VGA_DETECT_SEL_NO_DEVICE);
|
|
vga->connected = false;
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
if (status & VGA_TRANS_DONE) {
|
|
complete(&vga->complete);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static void zx_vga_hw_init(struct zx_vga *vga)
|
|
{
|
|
unsigned long ref = clk_get_rate(vga->i2c_wclk);
|
|
int div;
|
|
|
|
/*
|
|
* Set up I2C fast speed divider per formula below to get 400kHz.
|
|
* scl = ref / ((div + 1) * 4)
|
|
*/
|
|
div = DIV_ROUND_UP(ref / 1000, 400 * 4) - 1;
|
|
zx_writel(vga->mmio + VGA_CLK_DIV_FS, div);
|
|
|
|
/* Set up device detection */
|
|
zx_writel(vga->mmio + VGA_AUTO_DETECT_PARA, 0x80);
|
|
zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, VGA_DETECT_SEL_NO_DEVICE);
|
|
|
|
/*
|
|
* We need to poke monitor via DDC bus to get connection irq
|
|
* start working.
|
|
*/
|
|
zx_writel(vga->mmio + VGA_DEVICE_ADDR, DDC_ADDR);
|
|
zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_TRANS, VGA_CMD_TRANS);
|
|
}
|
|
|
|
static int zx_vga_bind(struct device *dev, struct device *master, void *data)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct drm_device *drm = data;
|
|
struct resource *res;
|
|
struct zx_vga *vga;
|
|
int irq;
|
|
int ret;
|
|
|
|
vga = devm_kzalloc(dev, sizeof(*vga), GFP_KERNEL);
|
|
if (!vga)
|
|
return -ENOMEM;
|
|
|
|
vga->dev = dev;
|
|
dev_set_drvdata(dev, vga);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
vga->mmio = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(vga->mmio))
|
|
return PTR_ERR(vga->mmio);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
vga->i2c_wclk = devm_clk_get(dev, "i2c_wclk");
|
|
if (IS_ERR(vga->i2c_wclk)) {
|
|
ret = PTR_ERR(vga->i2c_wclk);
|
|
DRM_DEV_ERROR(dev, "failed to get i2c_wclk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = zx_vga_pwrctrl_init(vga);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to init power control: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = zx_vga_ddc_register(vga);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to register ddc: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = zx_vga_register(drm, vga);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to register vga: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
init_completion(&vga->complete);
|
|
|
|
ret = devm_request_threaded_irq(dev, irq, zx_vga_irq_handler,
|
|
zx_vga_irq_thread, IRQF_SHARED,
|
|
dev_name(dev), vga);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev, "failed to request threaded irq: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(vga->i2c_wclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
zx_vga_hw_init(vga);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void zx_vga_unbind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct zx_vga *vga = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(vga->i2c_wclk);
|
|
}
|
|
|
|
static const struct component_ops zx_vga_component_ops = {
|
|
.bind = zx_vga_bind,
|
|
.unbind = zx_vga_unbind,
|
|
};
|
|
|
|
static int zx_vga_probe(struct platform_device *pdev)
|
|
{
|
|
return component_add(&pdev->dev, &zx_vga_component_ops);
|
|
}
|
|
|
|
static int zx_vga_remove(struct platform_device *pdev)
|
|
{
|
|
component_del(&pdev->dev, &zx_vga_component_ops);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id zx_vga_of_match[] = {
|
|
{ .compatible = "zte,zx296718-vga", },
|
|
{ /* end */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, zx_vga_of_match);
|
|
|
|
struct platform_driver zx_vga_driver = {
|
|
.probe = zx_vga_probe,
|
|
.remove = zx_vga_remove,
|
|
.driver = {
|
|
.name = "zx-vga",
|
|
.of_match_table = zx_vga_of_match,
|
|
},
|
|
};
|