WSL2-Linux-Kernel/drivers/mmc
Shawn Guo f750ba9b8d arm/imx: fix imx6q mmc error when mounting rootfs
The following error is seen in some case when mounting rootfs from
SD/MMC cards.

  Waiting for root device /dev/mmcblk0p1...
  mmc1: host does not support reading read-only switch. assuming write-enable.
  mmc1: new high speed SDHC card at address b368
  mmcblk0: mmc1:b368 SDC   3.74 GiB
   mmcblk0: p1
  mmc1: Timeout waiting for hardware interrupt.
  mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00
  end_request: I/O error, dev mmcblk0, sector 3678225
  Buffer I/O error on device mmcblk0p1, logical block 458754
  lost page write due to I/O error on mmcblk0p1

This patch fixes the problem by lowering the usdhc clock and correcting
watermark configuration.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11 16:53:35 +01:00
..
card mmc: core: add workaround for controllers with broken multiblock reads 2011-10-27 09:10:57 -04:00
core mmc: Fix implicit use of stat.h header in associated files 2011-10-31 19:32:07 -04:00
host arm/imx: fix imx6q mmc error when mounting rootfs 2011-11-11 16:53:35 +01:00
Kconfig mmc: explicitly mention SDIO support in Kconfig 2008-10-12 11:04:36 +02:00
Makefile mmc: Makefile: Fix EXTRA_CFLAGS assignment 2010-10-23 21:11:15 +08:00