614 строки
15 KiB
C
614 строки
15 KiB
C
/*
|
|
* Copyright (C) STMicroelectronics SA 2014
|
|
* Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
|
|
* License terms: GNU General Public License (GPL), version 2
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/component.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
#include "sti_awg_utils.h"
|
|
#include "sti_mixer.h"
|
|
|
|
/* DVO registers */
|
|
#define DVO_AWG_DIGSYNC_CTRL 0x0000
|
|
#define DVO_DOF_CFG 0x0004
|
|
#define DVO_LUT_PROG_LOW 0x0008
|
|
#define DVO_LUT_PROG_MID 0x000C
|
|
#define DVO_LUT_PROG_HIGH 0x0010
|
|
#define DVO_DIGSYNC_INSTR_I 0x0100
|
|
|
|
#define DVO_AWG_CTRL_EN BIT(0)
|
|
#define DVO_AWG_FRAME_BASED_SYNC BIT(2)
|
|
|
|
#define DVO_DOF_EN_LOWBYTE BIT(0)
|
|
#define DVO_DOF_EN_MIDBYTE BIT(1)
|
|
#define DVO_DOF_EN_HIGHBYTE BIT(2)
|
|
#define DVO_DOF_EN BIT(6)
|
|
#define DVO_DOF_MOD_COUNT_SHIFT 8
|
|
|
|
#define DVO_LUT_ZERO 0
|
|
#define DVO_LUT_Y_G 1
|
|
#define DVO_LUT_Y_G_DEL 2
|
|
#define DVO_LUT_CB_B 3
|
|
#define DVO_LUT_CB_B_DEL 4
|
|
#define DVO_LUT_CR_R 5
|
|
#define DVO_LUT_CR_R_DEL 6
|
|
#define DVO_LUT_HOLD 7
|
|
|
|
struct dvo_config {
|
|
u32 flags;
|
|
u32 lowbyte;
|
|
u32 midbyte;
|
|
u32 highbyte;
|
|
int (*awg_fwgen_fct)(
|
|
struct awg_code_generation_params *fw_gen_params,
|
|
struct awg_timing *timing);
|
|
};
|
|
|
|
static struct dvo_config rgb_24bit_de_cfg = {
|
|
.flags = (0L << DVO_DOF_MOD_COUNT_SHIFT),
|
|
.lowbyte = DVO_LUT_CR_R,
|
|
.midbyte = DVO_LUT_Y_G,
|
|
.highbyte = DVO_LUT_CB_B,
|
|
.awg_fwgen_fct = sti_awg_generate_code_data_enable_mode,
|
|
};
|
|
|
|
/**
|
|
* STI digital video output structure
|
|
*
|
|
* @dev: driver device
|
|
* @drm_dev: pointer to drm device
|
|
* @mode: current display mode selected
|
|
* @regs: dvo registers
|
|
* @clk_pix: pixel clock for dvo
|
|
* @clk: clock for dvo
|
|
* @clk_main_parent: dvo parent clock if main path used
|
|
* @clk_aux_parent: dvo parent clock if aux path used
|
|
* @panel_node: panel node reference from device tree
|
|
* @panel: reference to the panel connected to the dvo
|
|
* @enabled: true if dvo is enabled else false
|
|
* @encoder: drm_encoder it is bound
|
|
*/
|
|
struct sti_dvo {
|
|
struct device dev;
|
|
struct drm_device *drm_dev;
|
|
struct drm_display_mode mode;
|
|
void __iomem *regs;
|
|
struct clk *clk_pix;
|
|
struct clk *clk;
|
|
struct clk *clk_main_parent;
|
|
struct clk *clk_aux_parent;
|
|
struct device_node *panel_node;
|
|
struct drm_panel *panel;
|
|
struct dvo_config *config;
|
|
bool enabled;
|
|
struct drm_encoder *encoder;
|
|
struct drm_bridge *bridge;
|
|
};
|
|
|
|
struct sti_dvo_connector {
|
|
struct drm_connector drm_connector;
|
|
struct drm_encoder *encoder;
|
|
struct sti_dvo *dvo;
|
|
};
|
|
|
|
#define to_sti_dvo_connector(x) \
|
|
container_of(x, struct sti_dvo_connector, drm_connector)
|
|
|
|
#define BLANKING_LEVEL 16
|
|
int dvo_awg_generate_code(struct sti_dvo *dvo, u8 *ram_size, u32 *ram_code)
|
|
{
|
|
struct drm_display_mode *mode = &dvo->mode;
|
|
struct dvo_config *config = dvo->config;
|
|
struct awg_code_generation_params fw_gen_params;
|
|
struct awg_timing timing;
|
|
|
|
fw_gen_params.ram_code = ram_code;
|
|
fw_gen_params.instruction_offset = 0;
|
|
|
|
timing.total_lines = mode->vtotal;
|
|
timing.active_lines = mode->vdisplay;
|
|
timing.blanking_lines = mode->vsync_start - mode->vdisplay;
|
|
timing.trailing_lines = mode->vtotal - mode->vsync_start;
|
|
timing.total_pixels = mode->htotal;
|
|
timing.active_pixels = mode->hdisplay;
|
|
timing.blanking_pixels = mode->hsync_start - mode->hdisplay;
|
|
timing.trailing_pixels = mode->htotal - mode->hsync_start;
|
|
timing.blanking_level = BLANKING_LEVEL;
|
|
|
|
if (config->awg_fwgen_fct(&fw_gen_params, &timing)) {
|
|
DRM_ERROR("AWG firmware not properly generated\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
*ram_size = fw_gen_params.instruction_offset;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Configure AWG, writing instructions
|
|
*
|
|
* @dvo: pointer to DVO structure
|
|
* @awg_ram_code: pointer to AWG instructions table
|
|
* @nb: nb of AWG instructions
|
|
*/
|
|
static void dvo_awg_configure(struct sti_dvo *dvo, u32 *awg_ram_code, int nb)
|
|
{
|
|
int i;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
for (i = 0; i < nb; i++)
|
|
writel(awg_ram_code[i],
|
|
dvo->regs + DVO_DIGSYNC_INSTR_I + i * 4);
|
|
for (i = nb; i < AWG_MAX_INST; i++)
|
|
writel(0, dvo->regs + DVO_DIGSYNC_INSTR_I + i * 4);
|
|
|
|
writel(DVO_AWG_CTRL_EN, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
|
|
}
|
|
|
|
#define DBGFS_DUMP(reg) seq_printf(s, "\n %-25s 0x%08X", #reg, \
|
|
readl(dvo->regs + reg))
|
|
|
|
static void dvo_dbg_awg_microcode(struct seq_file *s, void __iomem *reg)
|
|
{
|
|
unsigned int i;
|
|
|
|
seq_puts(s, "\n\n");
|
|
seq_puts(s, " DVO AWG microcode:");
|
|
for (i = 0; i < AWG_MAX_INST; i++) {
|
|
if (i % 8 == 0)
|
|
seq_printf(s, "\n %04X:", i);
|
|
seq_printf(s, " %04X", readl(reg + i * 4));
|
|
}
|
|
}
|
|
|
|
static int dvo_dbg_show(struct seq_file *s, void *data)
|
|
{
|
|
struct drm_info_node *node = s->private;
|
|
struct sti_dvo *dvo = (struct sti_dvo *)node->info_ent->data;
|
|
|
|
seq_printf(s, "DVO: (vaddr = 0x%p)", dvo->regs);
|
|
DBGFS_DUMP(DVO_AWG_DIGSYNC_CTRL);
|
|
DBGFS_DUMP(DVO_DOF_CFG);
|
|
DBGFS_DUMP(DVO_LUT_PROG_LOW);
|
|
DBGFS_DUMP(DVO_LUT_PROG_MID);
|
|
DBGFS_DUMP(DVO_LUT_PROG_HIGH);
|
|
dvo_dbg_awg_microcode(s, dvo->regs + DVO_DIGSYNC_INSTR_I);
|
|
seq_puts(s, "\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct drm_info_list dvo_debugfs_files[] = {
|
|
{ "dvo", dvo_dbg_show, 0, NULL },
|
|
};
|
|
|
|
static void dvo_debugfs_exit(struct sti_dvo *dvo, struct drm_minor *minor)
|
|
{
|
|
drm_debugfs_remove_files(dvo_debugfs_files,
|
|
ARRAY_SIZE(dvo_debugfs_files),
|
|
minor);
|
|
}
|
|
|
|
static int dvo_debugfs_init(struct sti_dvo *dvo, struct drm_minor *minor)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dvo_debugfs_files); i++)
|
|
dvo_debugfs_files[i].data = dvo;
|
|
|
|
return drm_debugfs_create_files(dvo_debugfs_files,
|
|
ARRAY_SIZE(dvo_debugfs_files),
|
|
minor->debugfs_root, minor);
|
|
}
|
|
|
|
static void sti_dvo_disable(struct drm_bridge *bridge)
|
|
{
|
|
struct sti_dvo *dvo = bridge->driver_private;
|
|
|
|
if (!dvo->enabled)
|
|
return;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
if (dvo->config->awg_fwgen_fct)
|
|
writel(0x00000000, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
|
|
|
|
writel(0x00000000, dvo->regs + DVO_DOF_CFG);
|
|
|
|
if (dvo->panel)
|
|
dvo->panel->funcs->disable(dvo->panel);
|
|
|
|
/* Disable/unprepare dvo clock */
|
|
clk_disable_unprepare(dvo->clk_pix);
|
|
clk_disable_unprepare(dvo->clk);
|
|
|
|
dvo->enabled = false;
|
|
}
|
|
|
|
static void sti_dvo_pre_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct sti_dvo *dvo = bridge->driver_private;
|
|
struct dvo_config *config = dvo->config;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
if (dvo->enabled)
|
|
return;
|
|
|
|
/* Make sure DVO is disabled */
|
|
writel(0x00000000, dvo->regs + DVO_DOF_CFG);
|
|
writel(0x00000000, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
|
|
|
|
if (config->awg_fwgen_fct) {
|
|
u8 nb_instr;
|
|
u32 awg_ram_code[AWG_MAX_INST];
|
|
/* Configure AWG */
|
|
if (!dvo_awg_generate_code(dvo, &nb_instr, awg_ram_code))
|
|
dvo_awg_configure(dvo, awg_ram_code, nb_instr);
|
|
else
|
|
return;
|
|
}
|
|
|
|
/* Prepare/enable clocks */
|
|
if (clk_prepare_enable(dvo->clk_pix))
|
|
DRM_ERROR("Failed to prepare/enable dvo_pix clk\n");
|
|
if (clk_prepare_enable(dvo->clk))
|
|
DRM_ERROR("Failed to prepare/enable dvo clk\n");
|
|
|
|
if (dvo->panel)
|
|
dvo->panel->funcs->enable(dvo->panel);
|
|
|
|
/* Set LUT */
|
|
writel(config->lowbyte, dvo->regs + DVO_LUT_PROG_LOW);
|
|
writel(config->midbyte, dvo->regs + DVO_LUT_PROG_MID);
|
|
writel(config->highbyte, dvo->regs + DVO_LUT_PROG_HIGH);
|
|
|
|
/* Digital output formatter config */
|
|
val = (config->flags | DVO_DOF_EN);
|
|
writel(val, dvo->regs + DVO_DOF_CFG);
|
|
|
|
dvo->enabled = true;
|
|
}
|
|
|
|
static void sti_dvo_set_mode(struct drm_bridge *bridge,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct sti_dvo *dvo = bridge->driver_private;
|
|
struct sti_mixer *mixer = to_sti_mixer(dvo->encoder->crtc);
|
|
int rate = mode->clock * 1000;
|
|
struct clk *clkp;
|
|
int ret;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
memcpy(&dvo->mode, mode, sizeof(struct drm_display_mode));
|
|
|
|
/* According to the path used (main or aux), the dvo clocks should
|
|
* have a different parent clock. */
|
|
if (mixer->id == STI_MIXER_MAIN)
|
|
clkp = dvo->clk_main_parent;
|
|
else
|
|
clkp = dvo->clk_aux_parent;
|
|
|
|
if (clkp) {
|
|
clk_set_parent(dvo->clk_pix, clkp);
|
|
clk_set_parent(dvo->clk, clkp);
|
|
}
|
|
|
|
/* DVO clocks = compositor clock */
|
|
ret = clk_set_rate(dvo->clk_pix, rate);
|
|
if (ret < 0) {
|
|
DRM_ERROR("Cannot set rate (%dHz) for dvo_pix clk\n", rate);
|
|
return;
|
|
}
|
|
|
|
ret = clk_set_rate(dvo->clk, rate);
|
|
if (ret < 0) {
|
|
DRM_ERROR("Cannot set rate (%dHz) for dvo clk\n", rate);
|
|
return;
|
|
}
|
|
|
|
/* For now, we only support 24bit data enable (DE) synchro format */
|
|
dvo->config = &rgb_24bit_de_cfg;
|
|
}
|
|
|
|
static void sti_dvo_bridge_nope(struct drm_bridge *bridge)
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
static const struct drm_bridge_funcs sti_dvo_bridge_funcs = {
|
|
.pre_enable = sti_dvo_pre_enable,
|
|
.enable = sti_dvo_bridge_nope,
|
|
.disable = sti_dvo_disable,
|
|
.post_disable = sti_dvo_bridge_nope,
|
|
.mode_set = sti_dvo_set_mode,
|
|
};
|
|
|
|
static int sti_dvo_connector_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct sti_dvo_connector *dvo_connector
|
|
= to_sti_dvo_connector(connector);
|
|
struct sti_dvo *dvo = dvo_connector->dvo;
|
|
|
|
if (dvo->panel)
|
|
return dvo->panel->funcs->get_modes(dvo->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define CLK_TOLERANCE_HZ 50
|
|
|
|
static int sti_dvo_connector_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
int target = mode->clock * 1000;
|
|
int target_min = target - CLK_TOLERANCE_HZ;
|
|
int target_max = target + CLK_TOLERANCE_HZ;
|
|
int result;
|
|
struct sti_dvo_connector *dvo_connector
|
|
= to_sti_dvo_connector(connector);
|
|
struct sti_dvo *dvo = dvo_connector->dvo;
|
|
|
|
result = clk_round_rate(dvo->clk_pix, target);
|
|
|
|
DRM_DEBUG_DRIVER("target rate = %d => available rate = %d\n",
|
|
target, result);
|
|
|
|
if ((result < target_min) || (result > target_max)) {
|
|
DRM_DEBUG_DRIVER("dvo pixclk=%d not supported\n", target);
|
|
return MODE_BAD;
|
|
}
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static const
|
|
struct drm_connector_helper_funcs sti_dvo_connector_helper_funcs = {
|
|
.get_modes = sti_dvo_connector_get_modes,
|
|
.mode_valid = sti_dvo_connector_mode_valid,
|
|
};
|
|
|
|
static enum drm_connector_status
|
|
sti_dvo_connector_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct sti_dvo_connector *dvo_connector
|
|
= to_sti_dvo_connector(connector);
|
|
struct sti_dvo *dvo = dvo_connector->dvo;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
if (!dvo->panel) {
|
|
dvo->panel = of_drm_find_panel(dvo->panel_node);
|
|
if (dvo->panel)
|
|
drm_panel_attach(dvo->panel, connector);
|
|
}
|
|
|
|
if (dvo->panel)
|
|
return connector_status_connected;
|
|
|
|
return connector_status_disconnected;
|
|
}
|
|
|
|
static int sti_dvo_late_register(struct drm_connector *connector)
|
|
{
|
|
struct sti_dvo_connector *dvo_connector
|
|
= to_sti_dvo_connector(connector);
|
|
struct sti_dvo *dvo = dvo_connector->dvo;
|
|
|
|
if (dvo_debugfs_init(dvo, dvo->drm_dev->primary)) {
|
|
DRM_ERROR("DVO debugfs setup failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_connector_funcs sti_dvo_connector_funcs = {
|
|
.dpms = drm_atomic_helper_connector_dpms,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.detect = sti_dvo_connector_detect,
|
|
.destroy = drm_connector_cleanup,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
.late_register = sti_dvo_late_register,
|
|
};
|
|
|
|
static struct drm_encoder *sti_dvo_find_encoder(struct drm_device *dev)
|
|
{
|
|
struct drm_encoder *encoder;
|
|
|
|
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
|
|
if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS)
|
|
return encoder;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int sti_dvo_bind(struct device *dev, struct device *master, void *data)
|
|
{
|
|
struct sti_dvo *dvo = dev_get_drvdata(dev);
|
|
struct drm_device *drm_dev = data;
|
|
struct drm_encoder *encoder;
|
|
struct sti_dvo_connector *connector;
|
|
struct drm_connector *drm_connector;
|
|
struct drm_bridge *bridge;
|
|
int err;
|
|
|
|
/* Set the drm device handle */
|
|
dvo->drm_dev = drm_dev;
|
|
|
|
encoder = sti_dvo_find_encoder(drm_dev);
|
|
if (!encoder)
|
|
return -ENOMEM;
|
|
|
|
connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL);
|
|
if (!connector)
|
|
return -ENOMEM;
|
|
|
|
connector->dvo = dvo;
|
|
|
|
bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
bridge->driver_private = dvo;
|
|
bridge->funcs = &sti_dvo_bridge_funcs;
|
|
bridge->of_node = dvo->dev.of_node;
|
|
err = drm_bridge_add(bridge);
|
|
if (err) {
|
|
DRM_ERROR("Failed to add bridge\n");
|
|
return err;
|
|
}
|
|
|
|
err = drm_bridge_attach(drm_dev, bridge);
|
|
if (err) {
|
|
DRM_ERROR("Failed to attach bridge\n");
|
|
return err;
|
|
}
|
|
|
|
dvo->bridge = bridge;
|
|
encoder->bridge = bridge;
|
|
connector->encoder = encoder;
|
|
dvo->encoder = encoder;
|
|
|
|
drm_connector = (struct drm_connector *)connector;
|
|
|
|
drm_connector->polled = DRM_CONNECTOR_POLL_HPD;
|
|
|
|
drm_connector_init(drm_dev, drm_connector,
|
|
&sti_dvo_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
|
|
drm_connector_helper_add(drm_connector,
|
|
&sti_dvo_connector_helper_funcs);
|
|
|
|
err = drm_mode_connector_attach_encoder(drm_connector, encoder);
|
|
if (err) {
|
|
DRM_ERROR("Failed to attach a connector to a encoder\n");
|
|
goto err_sysfs;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_sysfs:
|
|
drm_bridge_remove(bridge);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void sti_dvo_unbind(struct device *dev,
|
|
struct device *master, void *data)
|
|
{
|
|
struct sti_dvo *dvo = dev_get_drvdata(dev);
|
|
struct drm_device *drm_dev = data;
|
|
|
|
dvo_debugfs_exit(dvo, drm_dev->primary);
|
|
|
|
drm_bridge_remove(dvo->bridge);
|
|
}
|
|
|
|
static const struct component_ops sti_dvo_ops = {
|
|
.bind = sti_dvo_bind,
|
|
.unbind = sti_dvo_unbind,
|
|
};
|
|
|
|
static int sti_dvo_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct sti_dvo *dvo;
|
|
struct resource *res;
|
|
struct device_node *np = dev->of_node;
|
|
|
|
DRM_INFO("%s\n", __func__);
|
|
|
|
dvo = devm_kzalloc(dev, sizeof(*dvo), GFP_KERNEL);
|
|
if (!dvo) {
|
|
DRM_ERROR("Failed to allocate memory for DVO\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dvo->dev = pdev->dev;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dvo-reg");
|
|
if (!res) {
|
|
DRM_ERROR("Invalid dvo resource\n");
|
|
return -ENOMEM;
|
|
}
|
|
dvo->regs = devm_ioremap_nocache(dev, res->start,
|
|
resource_size(res));
|
|
if (!dvo->regs)
|
|
return -ENOMEM;
|
|
|
|
dvo->clk_pix = devm_clk_get(dev, "dvo_pix");
|
|
if (IS_ERR(dvo->clk_pix)) {
|
|
DRM_ERROR("Cannot get dvo_pix clock\n");
|
|
return PTR_ERR(dvo->clk_pix);
|
|
}
|
|
|
|
dvo->clk = devm_clk_get(dev, "dvo");
|
|
if (IS_ERR(dvo->clk)) {
|
|
DRM_ERROR("Cannot get dvo clock\n");
|
|
return PTR_ERR(dvo->clk);
|
|
}
|
|
|
|
dvo->clk_main_parent = devm_clk_get(dev, "main_parent");
|
|
if (IS_ERR(dvo->clk_main_parent)) {
|
|
DRM_DEBUG_DRIVER("Cannot get main_parent clock\n");
|
|
dvo->clk_main_parent = NULL;
|
|
}
|
|
|
|
dvo->clk_aux_parent = devm_clk_get(dev, "aux_parent");
|
|
if (IS_ERR(dvo->clk_aux_parent)) {
|
|
DRM_DEBUG_DRIVER("Cannot get aux_parent clock\n");
|
|
dvo->clk_aux_parent = NULL;
|
|
}
|
|
|
|
dvo->panel_node = of_parse_phandle(np, "sti,panel", 0);
|
|
if (!dvo->panel_node)
|
|
DRM_ERROR("No panel associated to the dvo output\n");
|
|
|
|
platform_set_drvdata(pdev, dvo);
|
|
|
|
return component_add(&pdev->dev, &sti_dvo_ops);
|
|
}
|
|
|
|
static int sti_dvo_remove(struct platform_device *pdev)
|
|
{
|
|
component_del(&pdev->dev, &sti_dvo_ops);
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id dvo_of_match[] = {
|
|
{ .compatible = "st,stih407-dvo", },
|
|
{ /* end node */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dvo_of_match);
|
|
|
|
struct platform_driver sti_dvo_driver = {
|
|
.driver = {
|
|
.name = "sti-dvo",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = dvo_of_match,
|
|
},
|
|
.probe = sti_dvo_probe,
|
|
.remove = sti_dvo_remove,
|
|
};
|
|
|
|
MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
|
|
MODULE_LICENSE("GPL");
|