microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/arm/boot/dts/aspeed-bmc-facebook-cloudri...

545 строки
8.4 KiB
Plaintext
Исходник Ответственный История

// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2020 Facebook Inc.
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include "ast2600-facebook-netbmc-common.dtsi"
/ {
model = "Facebook Cloudripper BMC";
compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
aliases {
/*
* PCA9548 (1-0070) provides 8 channels connecting to
* SMB (Switch Main Board).
*/
i2c16 = &imux16;
i2c17 = &imux17;
i2c18 = &imux18;
i2c19 = &imux19;
i2c20 = &imux20;
i2c21 = &imux21;
i2c22 = &imux22;
i2c23 = &imux23;
/*
* PCA9548 (2-0070) provides 8 channels connecting to
* SCM (System Controller Module).
*/
i2c24 = &imux24;
i2c25 = &imux25;
i2c26 = &imux26;
i2c27 = &imux27;
i2c28 = &imux28;
i2c29 = &imux29;
i2c30 = &imux30;
i2c31 = &imux31;
/*
* PCA9548 (3-0070) provides 8 channels connecting to
* SMB (Switch Main Board).
*/
i2c32 = &imux32;
i2c33 = &imux33;
i2c34 = &imux34;
i2c35 = &imux35;
i2c36 = &imux36;
i2c37 = &imux37;
i2c38 = &imux38;
i2c39 = &imux39;
/*
* PCA9548 (8-0070) provides 8 channels connecting to
* PDB (Power Delivery Board).
*/
i2c40 = &imux40;
i2c41 = &imux41;
i2c42 = &imux42;
i2c43 = &imux43;
i2c44 = &imux44;
i2c45 = &imux45;
i2c46 = &imux46;
i2c47 = &imux47;
/*
* PCA9548 (15-0076) provides 8 channels connecting to
* FCM (Fan Controller Module).
*/
i2c48 = &imux48;
i2c49 = &imux49;
i2c50 = &imux50;
i2c51 = &imux51;
i2c52 = &imux52;
i2c53 = &imux53;
i2c54 = &imux54;
i2c55 = &imux55;
};
spi_gpio: spi-gpio {
num-chipselects = <2>;
cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
<&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
eeprom@1 {
compatible = "atmel,at93c46d";
spi-max-frequency = <250000>;
data-size = <16>;
spi-cs-high;
reg = <1>;
};
};
};
&ehci1 {
status = "okay";
};
/*
* "mdio1" is connected to the MDC/MDIO interface of the on-board
* management switch (whose ports are connected to BMC, Host and front
* panel ethernet port).
*/
&mdio1 {
status = "okay";
};
&mdio3 {
status = "okay";
ethphy1: ethernet-phy@13 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0d>;
};
};
&mac3 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii4_default>;
};
&i2c0 {
multi-master;
bus-frequency = <1000000>;
};
&i2c1 {
/*
* PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
* Main Board).
*/
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux16: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux17: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux18: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux19: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux20: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux21: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux22: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux23: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c2 {
/*
* PCA9548 (2-0070) provides 8 channels connecting to SCM (System
* Controller Module).
*/
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux24: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux25: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux26: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux27: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux28: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux29: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux30: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux31: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c3 {
/*
* PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
* Main Board).
*/
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux32: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux33: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux34: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux35: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux36: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux37: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux38: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux39: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c6 {
lp5012@14 {
compatible = "ti,lp5012";
reg = <0x14>;
#address-cells = <1>;
#size-cells = <0>;
multi-led@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
color = <LED_COLOR_ID_MULTI>;
function = LED_FUNCTION_ACTIVITY;
label = "sys";
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_BLUE>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
};
multi-led@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
color = <LED_COLOR_ID_MULTI>;
function = LED_FUNCTION_ACTIVITY;
label = "fan";
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_BLUE>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
};
multi-led@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
color = <LED_COLOR_ID_MULTI>;
function = LED_FUNCTION_ACTIVITY;
label = "psu";
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_BLUE>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
};
multi-led@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
color = <LED_COLOR_ID_MULTI>;
function = LED_FUNCTION_ACTIVITY;
label = "scm";
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_BLUE>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
};
};
};
&i2c8 {
/*
* PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
* Delivery Board).
*/
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux40: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux41: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux42: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux43: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux44: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux45: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux46: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux47: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c15 {
/*
* PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
* Controller Module).
*/
i2c-switch@76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76>;
i2c-mux-idle-disconnect;
imux48: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux49: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux50: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux51: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux52: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux53: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux54: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux55: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку