WSL2-Linux-Kernel/arch/arm/boot/dts/rk3288-veyron-jaq.dts

335 строки
5.4 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Google Veyron Jaq Rev 1+ board device tree source
*
* Copyright 2015 Google, Inc
*/
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
#include "cros-ec-sbs.dtsi"
/ {
model = "Google Jaq";
compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
"google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
"google,veyron-jaq-rev1", "google,veyron-jaq",
"google,veyron", "rockchip,rk3288";
};
&backlight {
/* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
brightness-levels = <8 255>;
num-interpolated-steps = <247>;
};
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
<&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
regulators {
mic_vcc: LDO_REG2 {
regulator-name = "mic_vcc";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
&sdio0 {
#address-cells = <1>;
#size-cells = <0>;
btmrvl: btmrvl@2 {
compatible = "marvell,sd8897-bt";
reg = <2>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
marvell,wakeup-pin = /bits/ 16 <13>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>;
};
};
&sdmmc {
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
&sdmmc_bus4>;
};
&vcc_5v {
enable-active-high;
gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
&gpio0 {
gpio-line-names = "PMIC_SLEEP_AP",
"DDRIO_PWROFF",
"DDRIO_RETEN",
"TS3A227E_INT_L",
"PMIC_INT_L",
"PWR_KEY_L",
"AP_LID_INT_L",
"EC_IN_RW",
"AC_PRESENT_AP",
/*
* RECOVERY_SW_L is Chrome OS ABI. Schematics call
* it REC_MODE_L.
*/
"RECOVERY_SW_L",
"OTP_OUT",
"HOST1_PWR_EN",
"USBOTG_PWREN_H",
"AP_WARM_RESET_H",
"nFALUT2",
"I2C0_SDA_PMIC",
"I2C0_SCL_PMIC",
"SUSPEND_L",
"USB_INT";
};
&gpio2 {
gpio-line-names = "CONFIG0",
"CONFIG1",
"CONFIG2",
"",
"",
"",
"",
"CONFIG3",
"",
"EMMC_RST_L",
"",
"",
"BL_PWR_EN",
"AVDD_1V8_DISP_EN";
};
&gpio3 {
gpio-line-names = "FLASH0_D0",
"FLASH0_D1",
"FLASH0_D2",
"FLASH0_D3",
"FLASH0_D4",
"FLASH0_D5",
"FLASH0_D6",
"FLASH0_D7",
"",
"",
"",
"",
"",
"",
"",
"",
"FLASH0_CS2/EMMC_CMD",
"",
"FLASH0_DQS/EMMC_CLKO";
};
&gpio4 {
gpio-line-names = "",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"UART0_RXD",
"UART0_TXD",
"UART0_CTS",
"UART0_RTS",
"SDIO0_D0",
"SDIO0_D1",
"SDIO0_D2",
"SDIO0_D3",
"SDIO0_CMD",
"SDIO0_CLK",
"BT_DEV_WAKE", /* Maybe missing from mighty? */
"",
"WIFI_ENABLE_H",
"BT_ENABLE_L",
"WIFI_HOST_WAKE",
"BT_HOST_WAKE";
};
&gpio5 {
gpio-line-names = "",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"SPI0_CLK",
"SPI0_CS0",
"SPI0_TXD",
"SPI0_RXD",
"",
"",
"",
"VCC50_HDMI_EN";
};
&gpio6 {
gpio-line-names = "I2S0_SCLK",
"I2S0_LRCK_RX",
"I2S0_LRCK_TX",
"I2S0_SDI",
"I2S0_SDO0",
"HP_DET_H",
"ALS_INT",
"INT_CODEC",
"I2S0_CLK",
"I2C2_SDA",
"I2C2_SCL",
"MICDET",
"",
"",
"",
"",
"SDMMC_D0",
"SDMMC_D1",
"SDMMC_D2",
"SDMMC_D3",
"SDMMC_CLK",
"SDMMC_CMD";
};
&gpio7 {
gpio-line-names = "LCDC_BL",
"PWM_LOG",
"BL_EN",
"TRACKPAD_INT",
"TPM_INT_H",
"SDMMC_DET_L",
/*
* AP_FLASH_WP_L is Chrome OS ABI. Schematics call
* it FW_WP_AP.
*/
"AP_FLASH_WP_L",
"EC_INT",
"CPU_NMI",
"DVSOK",
"SDMMC_WP", /* mighty only */
"EDP_HPD",
"DVS1",
"nFALUT1", /* nFAULT1 on jaq */
"LCD_EN",
"DVS2",
"VCC5V_GOOD_H",
"I2C4_SDA_TP",
"I2C4_SCL_TP",
"I2C5_SDA_HDMI",
"I2C5_SCL_HDMI",
"5V_DRV",
"UART2_RXD",
"UART2_TXD";
};
&gpio8 {
gpio-line-names = "RAM_ID0",
"RAM_ID1",
"RAM_ID2",
"RAM_ID3",
"I2C1_SDA_TPM",
"I2C1_SCL_TPM",
"SPI2_CLK",
"SPI2_CS0",
"SPI2_RXD",
"SPI2_TXD";
};
&pinctrl {
pinctrl-names = "default", "sleep";
pinctrl-0 = <
/* Common for sleep and wake, but no owners */
&ddr0_retention
&ddrio_pwroff
&global_pwroff
/* Wake only */
&suspend_l_wake
&bt_dev_wake_awake
>;
pinctrl-1 = <
/* Common for sleep and wake, but no owners */
&ddr0_retention
&ddrio_pwroff
&global_pwroff
/* Sleep only */
&suspend_l_sleep
&bt_dev_wake_sleep
>;
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};