80 строки
2.8 KiB
C
80 строки
2.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) 2018-2019 SiFive, Inc.
|
|
* Wesley Terpstra
|
|
* Paul Walmsley
|
|
*/
|
|
|
|
#ifndef __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
|
|
#define __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
|
|
|
|
#include <linux/types.h>
|
|
|
|
/* DIVQ_VALUES: number of valid DIVQ values */
|
|
#define DIVQ_VALUES 6
|
|
|
|
/*
|
|
* Bit definitions for struct wrpll_cfg.flags
|
|
*
|
|
* WRPLL_FLAGS_BYPASS_FLAG: if set, the PLL is either in bypass, or should be
|
|
* programmed to enter bypass
|
|
* WRPLL_FLAGS_RESET_FLAG: if set, the PLL is in reset
|
|
* WRPLL_FLAGS_INT_FEEDBACK_FLAG: if set, the PLL is configured for internal
|
|
* feedback mode
|
|
* WRPLL_FLAGS_EXT_FEEDBACK_FLAG: if set, the PLL is configured for external
|
|
* feedback mode (not yet supported by this driver)
|
|
*/
|
|
#define WRPLL_FLAGS_BYPASS_SHIFT 0
|
|
#define WRPLL_FLAGS_BYPASS_MASK BIT(WRPLL_FLAGS_BYPASS_SHIFT)
|
|
#define WRPLL_FLAGS_RESET_SHIFT 1
|
|
#define WRPLL_FLAGS_RESET_MASK BIT(WRPLL_FLAGS_RESET_SHIFT)
|
|
#define WRPLL_FLAGS_INT_FEEDBACK_SHIFT 2
|
|
#define WRPLL_FLAGS_INT_FEEDBACK_MASK BIT(WRPLL_FLAGS_INT_FEEDBACK_SHIFT)
|
|
#define WRPLL_FLAGS_EXT_FEEDBACK_SHIFT 3
|
|
#define WRPLL_FLAGS_EXT_FEEDBACK_MASK BIT(WRPLL_FLAGS_EXT_FEEDBACK_SHIFT)
|
|
|
|
/**
|
|
* struct wrpll_cfg - WRPLL configuration values
|
|
* @divr: reference divider value (6 bits), as presented to the PLL signals
|
|
* @divf: feedback divider value (9 bits), as presented to the PLL signals
|
|
* @divq: output divider value (3 bits), as presented to the PLL signals
|
|
* @flags: PLL configuration flags. See above for more information
|
|
* @range: PLL loop filter range. See below for more information
|
|
* @output_rate_cache: cached output rates, swept across DIVQ
|
|
* @parent_rate: PLL refclk rate for which values are valid
|
|
* @max_r: maximum possible R divider value, given @parent_rate
|
|
* @init_r: initial R divider value to start the search from
|
|
*
|
|
* @divr, @divq, @divq, @range represent what the PLL expects to see
|
|
* on its input signals. Thus @divr and @divf are the actual divisors
|
|
* minus one. @divq is a power-of-two divider; for example, 1 =
|
|
* divide-by-2 and 6 = divide-by-64. 0 is an invalid @divq value.
|
|
*
|
|
* When initially passing a struct wrpll_cfg record, the
|
|
* record should be zero-initialized with the exception of the @flags
|
|
* field. The only flag bits that need to be set are either
|
|
* WRPLL_FLAGS_INT_FEEDBACK or WRPLL_FLAGS_EXT_FEEDBACK.
|
|
*/
|
|
struct wrpll_cfg {
|
|
u8 divr;
|
|
u8 divq;
|
|
u8 range;
|
|
u8 flags;
|
|
u16 divf;
|
|
/* private: */
|
|
u32 output_rate_cache[DIVQ_VALUES];
|
|
unsigned long parent_rate;
|
|
u8 max_r;
|
|
u8 init_r;
|
|
};
|
|
|
|
int wrpll_configure_for_rate(struct wrpll_cfg *c, u32 target_rate,
|
|
unsigned long parent_rate);
|
|
|
|
unsigned int wrpll_calc_max_lock_us(const struct wrpll_cfg *c);
|
|
|
|
unsigned long wrpll_calc_output_rate(const struct wrpll_cfg *c,
|
|
unsigned long parent_rate);
|
|
|
|
#endif /* __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H */
|