931 строка
19 KiB
Plaintext
931 строка
19 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
|
* <angelogioacchino.delregno@somainline.org>
|
|
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include "msm8998.dtsi"
|
|
#include "pm8005.dtsi"
|
|
#include "pm8998.dtsi"
|
|
#include "pmi8998.dtsi"
|
|
|
|
/ {
|
|
/* required for bootloader to select correct board */
|
|
qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
|
|
qcom,board-id = <8 0>;
|
|
|
|
clocks {
|
|
div1_mclk: divclk1 {
|
|
compatible = "gpio-gate-clock";
|
|
pinctrl-0 = <&div_clk1>;
|
|
pinctrl-names = "default";
|
|
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
|
|
#clock-cells = <0>;
|
|
enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
board_vbat: vbat-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBAT";
|
|
|
|
regulator-min-microvolt = <4000000>;
|
|
regulator-max-microvolt = <4000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
cam0_vdig_vreg: cam0-vdig {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam0_vdig";
|
|
startup-delay-us = <0>;
|
|
enable-active-high;
|
|
gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_cam_pwr_en>;
|
|
};
|
|
|
|
cam1_vdig_vreg: cam1-vdig {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam1_vdig";
|
|
startup-delay-us = <0>;
|
|
enable-active-high;
|
|
gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&chat_cam_pwr_en>;
|
|
vin-supply = <&vreg_s3a_1p35>;
|
|
};
|
|
|
|
cam_vio_vreg: cam-vio-vreg {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam_vio_vreg";
|
|
startup-delay-us = <0>;
|
|
enable-active-high;
|
|
gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_cam_pwr_io_en>;
|
|
vin-supply = <&vreg_lvs1a_1p8>;
|
|
};
|
|
|
|
touch_vddio_vreg: touch-vddio-vreg {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "touch_vddio_vreg";
|
|
startup-delay-us = <10000>;
|
|
gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ts_vddio_en>;
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
extcon_usb: extcon-usb {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
|
|
vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cc_dir_default &usb_detect_en>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
label = "Side buttons";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
|
|
button-vol-down {
|
|
label = "Volume Down";
|
|
gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_KEY>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
wakeup-source;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
button-camera-snapshot {
|
|
label = "Camera Snapshot";
|
|
gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_KEY>;
|
|
linux,code = <KEY_CAMERA>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
button-camera-focus {
|
|
label = "Camera Focus";
|
|
gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_KEY>;
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
gpio-hall-sensor {
|
|
compatible = "gpio-keys";
|
|
label = "Hall sensors";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&acc_cover_open>;
|
|
|
|
event-hall-sensor0 {
|
|
label = "Cover Hall Sensor";
|
|
gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
wakeup-source;
|
|
debounce-interval = <30>;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
hyp_mem: memory@85800000 {
|
|
reg = <0x0 0x85800000 0x0 0x3700000>;
|
|
no-map;
|
|
};
|
|
|
|
cont_splash_mem: memory@9d400000 {
|
|
reg = <0x0 0x9d400000 0x0 0x2400000>;
|
|
no-map;
|
|
};
|
|
|
|
zap_shader_region: memory@f6400000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x0 0xf6400000 0x0 0x2000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_region: memory@fe000000 {
|
|
reg = <0x0 0xfe000000 0x0 0x800000>;
|
|
no-map;
|
|
};
|
|
|
|
qseecom_region: memory@fe800000 {
|
|
reg = <0x0 0xfe800000 0x0 0x1400000>;
|
|
no-map;
|
|
};
|
|
|
|
ramoops@ffc00000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0xffc00000 0x0 0x100000>;
|
|
record-size = <0x10000>;
|
|
console-size = <0x60000>;
|
|
ftrace-size = <0x10000>;
|
|
pmsg-size = <0x20000>;
|
|
ecc-size = <16>;
|
|
};
|
|
};
|
|
|
|
vibrator {
|
|
compatible = "gpio-vibrator";
|
|
enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vib_ldo_en>;
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c5 {
|
|
status = "okay";
|
|
clock-frequency = <355000>;
|
|
|
|
touchscreen@2c {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x2c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ts_int_n>;
|
|
|
|
vdd-supply = <&vreg_l28_3p0>;
|
|
vio-supply = <&touch_vddio_vreg>;
|
|
|
|
syna,reset-delay-ms = <220>;
|
|
syna,startup-delay-ms = <1000>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x01>;
|
|
syna,nosleep-mode = <1>;
|
|
};
|
|
|
|
rmi4-f11@11 {
|
|
reg = <0x11>;
|
|
syna,sensor-type = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c5_sleep {
|
|
bias-disable;
|
|
};
|
|
|
|
&blsp1_uart3 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
|
max-speed = <3200000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
|
|
};
|
|
};
|
|
|
|
&blsp2_uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp2_i2c2 {
|
|
status = "okay";
|
|
|
|
proximity@29 {
|
|
compatible = "st,vl53l0x";
|
|
reg = <0x29>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
|
|
vdd-supply = <&cam_vio_vreg>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tof_int_n &tof_reset>;
|
|
};
|
|
};
|
|
|
|
&ibb {
|
|
regulator-min-microamp = <800000>;
|
|
regulator-max-microamp = <800000>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-over-current-protection;
|
|
regulator-pull-down;
|
|
regulator-ramp-delay = <1>;
|
|
regulator-settling-time-up-us = <600>;
|
|
regulator-settling-time-down-us = <1000>;
|
|
regulator-soft-start;
|
|
qcom,discharge-resistor-kohms = <300>;
|
|
};
|
|
|
|
&lab {
|
|
regulator-min-microamp = <200000>;
|
|
regulator-max-microamp = <200000>;
|
|
regulator-enable-ramp-delay = <500>;
|
|
regulator-over-current-protection;
|
|
regulator-pull-down;
|
|
regulator-ramp-delay = <1>;
|
|
regulator-settling-time-up-us = <50000>;
|
|
regulator-settling-time-down-us = <3000>;
|
|
regulator-soft-start;
|
|
};
|
|
|
|
&pm8005_gpios {
|
|
gpio-line-names = "NC", /* GPIO_1 */
|
|
"NC",
|
|
"SLB",
|
|
"OPTION_1_PM8005";
|
|
};
|
|
|
|
&pm8005_regulators {
|
|
/* VDD_GFX supply */
|
|
pm8005_s1: s1 {
|
|
regulator-min-microvolt = <524000>;
|
|
regulator-max-microvolt = <1088000>;
|
|
regulator-enable-ramp-delay = <500>;
|
|
/* Hack until we rig up the gpu consumer */
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&pm8998_gpios {
|
|
gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
|
|
"NC",
|
|
"WLAN_SW_CTRL (DISALLOWED)",
|
|
"SSC_PWR_EN",
|
|
"VOL_DOWN_N",
|
|
"VOL_UP_N",
|
|
"SNAPSHOT_N",
|
|
"FOCUS_N",
|
|
"FLASH_THERM",
|
|
"", /* GPIO_10 */
|
|
"",
|
|
"",
|
|
"DIV_CLK1",
|
|
"NC",
|
|
"NC (DISALLOWED)",
|
|
"DIV_CLK3",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC (DISALLOWED)", /* GPIO_20 */
|
|
"NFC_CLK_REQ",
|
|
"NC (DISALLOWED)",
|
|
"WCSS_PWR_REQ",
|
|
"OPTION_1 (DISALLOWED)",
|
|
"OPTION_2 (DISALLOWED)",
|
|
"PM_SLB (DISALLOWED)";
|
|
|
|
vol_down_n: vol-down-n-state {
|
|
pins = "gpio5";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
bias-pull-up;
|
|
input-enable;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
|
};
|
|
|
|
focus_n: focus-n-state {
|
|
pins = "gpio7";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
bias-pull-up;
|
|
input-enable;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
|
};
|
|
|
|
snapshot_n: snapshot-n-state {
|
|
pins = "gpio8";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
bias-pull-up;
|
|
input-enable;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
|
};
|
|
|
|
div_clk1: div-clk1-state {
|
|
pins = "gpio13";
|
|
function = "func2";
|
|
power-source = <0>;
|
|
};
|
|
};
|
|
|
|
&pmi8998_gpios {
|
|
gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
|
|
"NC",
|
|
"NC",
|
|
"TYPEC_UUSB_SEL",
|
|
"VIB_LDO_EN",
|
|
"NC",
|
|
"DISPLAY_TYPE_SEL",
|
|
"NC",
|
|
"NC",
|
|
"NC", /* GPIO_10 */
|
|
"NC",
|
|
"DIV_CLK3",
|
|
"SPMI_I2C_SEL",
|
|
"NC";
|
|
|
|
main_cam_pwr_io_en: main-cam-pwr-io-en-state {
|
|
pins = "gpio1";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
bias-disable;
|
|
drive-push-pull;
|
|
output-low;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
|
power-source = <1>;
|
|
};
|
|
|
|
vib_ldo_en: vib-ldo-en-state {
|
|
pins = "gpio5";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
bias-disable;
|
|
drive-push-pull;
|
|
output-low;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
|
power-source = <0>;
|
|
};
|
|
};
|
|
|
|
&pm8998_resin {
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
status = "okay";
|
|
};
|
|
|
|
&qusb2phy {
|
|
status = "okay";
|
|
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
|
};
|
|
|
|
&rpm_requests {
|
|
regulators-0 {
|
|
compatible = "qcom,rpm-pm8998-regulators";
|
|
|
|
vdd_s1-supply = <&vph_pwr>;
|
|
vdd_s2-supply = <&vph_pwr>;
|
|
vdd_s3-supply = <&vph_pwr>;
|
|
vdd_s4-supply = <&vph_pwr>;
|
|
vdd_s5-supply = <&vph_pwr>;
|
|
vdd_s6-supply = <&vph_pwr>;
|
|
vdd_s7-supply = <&vph_pwr>;
|
|
vdd_s8-supply = <&vph_pwr>;
|
|
vdd_s9-supply = <&vph_pwr>;
|
|
vdd_s10-supply = <&vph_pwr>;
|
|
vdd_s11-supply = <&vph_pwr>;
|
|
vdd_s12-supply = <&vph_pwr>;
|
|
vdd_s13-supply = <&vph_pwr>;
|
|
vdd_l1_l27-supply = <&vreg_s7a_1p025>;
|
|
vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
|
|
vdd_l3_l11-supply = <&vreg_s7a_1p025>;
|
|
vdd_l4_l5-supply = <&vreg_s7a_1p025>;
|
|
vdd_l6-supply = <&vreg_s5a_2p04>;
|
|
vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
|
|
vdd_l9-supply = <&vreg_bob>;
|
|
vdd_l10_l23_l25-supply = <&vreg_bob>;
|
|
vdd_l13_l19_l21-supply = <&vreg_bob>;
|
|
vdd_l16_l28-supply = <&vreg_bob>;
|
|
vdd_l18_l22-supply = <&vreg_bob>;
|
|
vdd_l20_l24-supply = <&vreg_bob>;
|
|
vdd_l26-supply = <&vreg_s3a_1p35>;
|
|
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
|
|
|
|
vreg_s3a_1p35: s3 {
|
|
regulator-min-microvolt = <1352000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_s4a_1p8: s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-system-load = <100000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_s5a_2p04: s5 {
|
|
regulator-min-microvolt = <1904000>;
|
|
regulator-max-microvolt = <2032000>;
|
|
};
|
|
|
|
vreg_s7a_1p025: s7 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1028000>;
|
|
};
|
|
|
|
vreg_l1a_0p875: l1 {
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
regulator-system-load = <73400>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l2a_1p2: l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-system-load = <12560>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l3a_1p0: l3 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
vreg_l5a_0p8: l5 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <800000>;
|
|
};
|
|
|
|
vreg_l6a_1p8: l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l7a_1p8: l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l8a_1p2: l8 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vreg_l9a_1p8: l9 {
|
|
regulator-min-microvolt = <1808000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
};
|
|
|
|
vreg_l10a_1p8: l10 {
|
|
regulator-min-microvolt = <1808000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
};
|
|
|
|
vreg_l11a_1p0: l11 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
vreg_l12a_1p8: l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l13a_2p95: l13 {
|
|
regulator-min-microvolt = <1808000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l14a_1p85: l14 {
|
|
regulator-min-microvolt = <1848000>;
|
|
regulator-max-microvolt = <1856000>;
|
|
regulator-system-load = <32000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l15a_1p8: l15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l16a_2p7: l16 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2704000>;
|
|
};
|
|
|
|
vreg_l17a_1p3: l17 {
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
};
|
|
|
|
vreg_l18a_2p85: l18 { };
|
|
|
|
vreg_l19a_2p7: l19 {
|
|
regulator-min-microvolt = <2696000>;
|
|
regulator-max-microvolt = <2704000>;
|
|
};
|
|
|
|
vreg_l20a_2p95: l20 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-system-load = <10000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l21a_2p95: l21 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-system-load = <800000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l22a_2p85: l22 { };
|
|
|
|
vreg_l23a_3p3: l23 {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
};
|
|
|
|
vreg_l24a_3p075: l24 {
|
|
regulator-min-microvolt = <3088000>;
|
|
regulator-max-microvolt = <3088000>;
|
|
};
|
|
|
|
vreg_l25a_3p3: l25 {
|
|
regulator-min-microvolt = <3104000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
};
|
|
|
|
vreg_l26a_1p2: l26 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l28_3p0: l28 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vreg_lvs1a_1p8: lvs1 { };
|
|
|
|
vreg_lvs2a_1p8: lvs2 { };
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,rpm-pmi8998-regulators";
|
|
|
|
vdd_bob-supply = <&vph_pwr>;
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdhc2 {
|
|
status = "okay";
|
|
cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
|
|
|
|
vmmc-supply = <&vreg_l21a_2p95>;
|
|
vqmmc-supply = <&vreg_l13a_2p95>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on &sdc2_cd>;
|
|
pinctrl-1 = <&sdc2_off &sdc2_cd>;
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
|
gpio-line-names = "", /* GPIO_0 */
|
|
"",
|
|
"",
|
|
"",
|
|
"DEBUG_UART_TX",
|
|
"DEBUG_UART_RX",
|
|
"CAMSENSOR_I2C_SDA",
|
|
"CAMSENSOR_I2C_SCL",
|
|
"NC",
|
|
"NC",
|
|
"MDP_VSYNC_P", /* GPIO_10 */
|
|
"RGBC_IR_INT",
|
|
"NFC_VEN",
|
|
"CAM_MCLK0",
|
|
"CAM_MCLK1",
|
|
"NC",
|
|
"NC",
|
|
"CCI_I2C_SDA0",
|
|
"CCI_I2C_SCL0",
|
|
"CCI_I2C_SDA1",
|
|
"CCI_I2C_SCL1", /* GPIO_20 */
|
|
"MAIN_CAM_PWR_EN",
|
|
"TOF_INT_N",
|
|
"NC",
|
|
"NC",
|
|
"CHAT_CAM_PWR_EN",
|
|
"NC",
|
|
"TOF_RESET_N",
|
|
"CAM2_RSTN",
|
|
"NC",
|
|
"CAM1_RSTN", /* GPIO_30 */
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"CC_DIR",
|
|
"UIM2_DETECT_EN",
|
|
"FP_RESET_N", /* GPIO_40 */
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"BT_HCI_UART_TXD",
|
|
"BT_HCI_UART_RXD",
|
|
"BT_HCI_UART_CTS_N",
|
|
"BT_HCI_UART_RFR_N",
|
|
"NC",
|
|
"NC", /* GPIO_50 */
|
|
"NC",
|
|
"NC",
|
|
"CODEC_INT2_N",
|
|
"CODEC_INT1_N",
|
|
"APPS_I2C_SDA",
|
|
"APPS_I2C_SCL",
|
|
"FORCED_USB_BOOT",
|
|
"NC",
|
|
"NC",
|
|
"NC", /* GPIO_60 */
|
|
"NC",
|
|
"NC",
|
|
"TRAY2_DET_DS",
|
|
"CODEC_RST_N",
|
|
"WSA_L_EN",
|
|
"WSA_R_EN",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"LPASS_SLIMBUS_CLK", /* GPIO_70 */
|
|
"LPASS_SLIMBUS_DATA0",
|
|
"LPASS_SLIMBUS_DATA1",
|
|
"BT_FM_SLIMBUS_DATA",
|
|
"BT_FM_SLIMBUS_CLK",
|
|
"NC",
|
|
"RF_LCD_ID_EN",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC", /* GPIO_80 */
|
|
"SW_SERVICE",
|
|
"TX_GTR_THRES_IN",
|
|
"HW_ID0",
|
|
"HW_ID1",
|
|
"NC",
|
|
"NC",
|
|
"TS_I2C_SDA",
|
|
"TS_I2C_SCL",
|
|
"TS_RESET_N",
|
|
"NC", /* GPIO_90 */
|
|
"NC",
|
|
"NFC_IRQ",
|
|
"NFC_DWLD_EN",
|
|
"DISP_RESET_N",
|
|
"TRAY2_DET",
|
|
"CAM_SOF",
|
|
"RFFE6_CLK",
|
|
"RFFE6_DATA",
|
|
"DEBUG_GPIO0",
|
|
"DEBUG_GPIO1", /* GPIO_100 */
|
|
"GRFC4",
|
|
"NC",
|
|
"NC",
|
|
"RSVD",
|
|
"UIM2_DATA",
|
|
"UIM2_CLK",
|
|
"UIM2_RESET",
|
|
"UIM2_PRESENT",
|
|
"UIM1_DATA",
|
|
"UIM1_CLK", /* GPIO_110 */
|
|
"UIM1_RST",
|
|
"UIM1_PRESENT",
|
|
"UIM_BATT_ALARM",
|
|
"RSVD",
|
|
"NC",
|
|
"NC",
|
|
"ACCEL_INT",
|
|
"GYRO_INT",
|
|
"COMPASS_INT",
|
|
"ALS_PROX_INT_N", /* GPIO_120 */
|
|
"FP_INT_N",
|
|
"NC",
|
|
"BAROMETER_INT",
|
|
"ACC_COVER_OPEN",
|
|
"TS_INT_N",
|
|
"NC",
|
|
"NC",
|
|
"USB_DETECT_EN",
|
|
"NC",
|
|
"QLINK_REQUEST", /* GPIO_130 */
|
|
"QLINK_ENABLE",
|
|
"NC",
|
|
"NC",
|
|
"WMSS_RESET_N",
|
|
"PA_INDICATOR_OR",
|
|
"NC",
|
|
"RFFE3_DATA",
|
|
"RFFE3_CLK",
|
|
"RFFE4_DATA",
|
|
"RFFE4_CLK", /* GPIO_140 */
|
|
"RFFE5_DATA",
|
|
"RFFE5_CLK",
|
|
"GNSS_EN",
|
|
"MSS_LTE_COXM_TXD",
|
|
"MSS_LTE_COXM_RXD",
|
|
"RFFE2_DATA",
|
|
"RFFE2_CLK",
|
|
"RFFE1_DATA",
|
|
"RFFE1_CLK";
|
|
|
|
mdp_vsync_p: mdp-vsync-p-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync_a";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
nfc_ven: nfc-ven-state {
|
|
pins = "gpio12";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
output-low;
|
|
};
|
|
|
|
cam_mclk0_active: cam-mclk0-active-state {
|
|
pins = "gpio13";
|
|
function = "cam_mclk";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
cam_mclk1_active: cam-mclk1-active-state {
|
|
pins = "gpio14";
|
|
function = "cam_mclk";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
cci0_default: cci0-default-state {
|
|
pins = "gpio18", "gpio19";
|
|
function = "cci_i2c";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
cci1_default: cci1-default-state {
|
|
pins = "gpio19", "gpio20";
|
|
function = "cci_i2c";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
main_cam_pwr_en: main-cam-pwr-en-default-state {
|
|
pins = "gpio21";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
tof_int_n: tof-int-n-state {
|
|
pins = "gpio22";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
chat_cam_pwr_en: chat-cam-pwr-en-default-state {
|
|
pins = "gpio25";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
tof_reset: tof-reset-state {
|
|
pins = "gpio27";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
cc_dir_default: cc-dir-active-state {
|
|
pins = "gpio38";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
acc_cover_open: acc-cover-open-state {
|
|
pins = "gpio124";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
ts_int_n: ts-int-n-state {
|
|
pins = "gpio125";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
usb_detect_en: usb-detect-en-active-state {
|
|
pins = "gpio128";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
output-low;
|
|
};
|
|
|
|
ts_vddio_en: ts-vddio-en-default-state {
|
|
pins = "gpio133";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* WARNING:
|
|
* Disable UFS until card quirks are in to avoid unrecoverable hard-brick
|
|
* that would happen as soon as the UFS card gets probed as, without the
|
|
* required quirks, the bootloader will be erased right after card probe.
|
|
*/
|
|
&ufshc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&ufsphy {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_dwc3 {
|
|
/* Force to peripheral until we have Type-C hooked up */
|
|
dr_mode = "peripheral";
|
|
extcon = <&extcon_usb>;
|
|
};
|
|
|
|
&usb3phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l2a_1p2>;
|
|
};
|