WSL2-Linux-Kernel/drivers/pinctrl/freescale
Linus Torvalds bc3b3f4bfb This is the bulk of pin control changes for the v5.7 kernel cycle.
There are no core changes this time, only driver developments.
 
 - New driver for the Dialog Semiconductor DA9062 Power Management
   Integrated Circuit (PMIC).
 
 - Renesas SH-PFC has improved consistency, with group and
   register checks in the configuration checker.
 
 - New subdriver for the Qualcomm IPQ6018.
 
 - Add the RGMII pin control functionality to Qualcomm IPQ8064.
 
 - Performance and code quality cleanups in the Mediatek
   driver.
 
 - Improve the Broadcom BCM2835 support to cover all the GPIOs
   that exist in it.
 
 - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on
   suspend.
 
 - Add some missing groups and functions to the Ingenic driver.
 
 - Convert some of the Freescale device tree bindings to use the
   new and all improved JSON YAML markup.
 
 - Refactorings and support for the SFIO/GPIO in the Tegra194
   SoC driver.
 
 - Support high impedance mode in the Spreadtrum/Unisoc driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl6FlRoACgkQQRCzN7AZ
 XXPiAxAAuAvY07H739YF4ANvtLpfbtz0KBK4M2XGiD41VMcp5MhZtT9TdXAIRisb
 W4QMHbMxhwO4gdxmhVOetXeQNQnHch4oPsFyd1UdyuwNEtvlm8qst99VcdQPz7Jv
 zyL4cat1fTrwdcnLQl5eaJR7a9bKLqAd4rlb/suQZsaVf+URUWJyZBuU41GEx9A+
 w+EPv8doxTWRaE0NpafIwNCLxTR3i2Vt59fkRT4pSi8fTu9/Zv5yW8yWvbYZdlaO
 2bUaFjN65oyiikjPTgyQxb95A8yDJHkNnkgfTw4ghCY/k8u3GvMfKS7V1tO+nq6B
 bkv9E3jR1u7Ktkq1rLshS2eycl02uSJ3OmzyfL8S/GQxVdUPi3+X3hmyv2ctbEvC
 qy+7F6zx/Pt/WdPnAisdsVai9T3/YGoSN1C3n7Ufltjcrt0w5xP7/AgEVR4nHHMP
 NMWNoauGWsBDKtYPG7beX3thjkm3mUpezcEOxho7+r5tOtBaU623pWr+NHEPZu48
 8oKOCILaUkacUmmMjjOzraAeOxV7Ut+xumu0mgMj0EjZfJZDrgQsqkmfMbGcU5Fa
 y4S5+tAd+cELXveLVJB3Ml9u1R037x8VtAv+Z2a7qVnf1gSgf0bpAJ+SnfC/XbLX
 fBpSCsIMXSpioVNuS9gbkpnfsRPcTOrOXyxinP5onI8AHlIj1Rg=
 =1ZKq
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.7 kernel cycle.

  There are no core changes this time, only driver developments:

   - New driver for the Dialog Semiconductor DA9062 Power Management
     Integrated Circuit (PMIC).

   - Renesas SH-PFC has improved consistency, with group and register
     checks in the configuration checker.

   - New subdriver for the Qualcomm IPQ6018.

   - Add the RGMII pin control functionality to Qualcomm IPQ8064.

   - Performance and code quality cleanups in the Mediatek driver.

   - Improve the Broadcom BCM2835 support to cover all the GPIOs that
     exist in it.

   - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on
     suspend.

   - Add some missing groups and functions to the Ingenic driver.

   - Convert some of the Freescale device tree bindings to use the new
     and all improved JSON YAML markup.

   - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC
     driver.

   - Support high impedance mode in the Spreadtrum/Unisoc driver"

* tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits)
  pinctrl: qcom: fix compilation error
  pinctrl: qcom: use scm_call to route GPIO irq to Apps
  pinctrl: sprd: Add pin high impedance mode support
  pinctrl: sprd: Use the correct pin output configuration
  pinctrl: tegra: Add SFIO/GPIO programming on Tegra194
  pinctrl: tegra: Renumber the GG.0 and GG.1 pins
  pinctrl: tegra: Do not add default pin range on Tegra194
  pinctrl: tegra: Pass struct tegra_pmx for pin range check
  pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo
  pinctrl: tegra: Fix whitespace issues for improved readability
  pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow
  pinctrl: freescale: drop the dependency on ARM64 for i.MX8M
  Revert "pinctrl: mvebu: armada-37xx: use use platform api"
  dt-bindings: pinctrl: at91: Fix a typo ("descibe")
  pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm
  pinctrl: sprd: Fix the kconfig warning
  pinctrl: ingenic: add hdmi-ddc pin control group
  pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member
  pinctrl: sprd: Allow the SPRD pinctrl driver building into a module
  pinctrl: Export some needed symbols at module load time
  ...
2020-04-02 15:47:18 -07:00
..
Kconfig pinctrl: freescale: drop the dependency on ARM64 for i.MX8M 2020-03-26 00:22:42 +01:00
Makefile pinctrl: freescale: Add i.MX8MP pinctrl driver support 2020-01-23 15:49:39 +01:00
pinctrl-imx.c pinctrl: freescale: imx: Add of_node_put() before return 2019-08-10 10:29:19 +02:00
pinctrl-imx.h pinctrl: imx8mq: Add suspend/resume ops 2019-04-11 15:41:43 +02:00
pinctrl-imx1-core.c remove ioremap_nocache and devm_ioremap_nocache 2020-01-06 09:45:59 +01:00
pinctrl-imx1.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx1.h pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx6dl.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx6q.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx6sl.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx6sll.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx6sx.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx6ul.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx7d.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx7ulp.c pinctrl: fsl: imx7ulp: change to use imx legacy binding 2018-11-09 10:54:29 +01:00
pinctrl-imx8mm.c pinctrl: freescale: Add imx8mm pinctrl driver support 2019-01-30 10:35:22 +01:00
pinctrl-imx8mn.c pinctrl: freescale: Add i.MX8MN pinctrl driver support 2019-06-25 10:40:23 +02:00
pinctrl-imx8mp.c pinctrl: freescale: Add i.MX8MP pinctrl driver support 2020-01-23 15:49:39 +01:00
pinctrl-imx8mq.c pinctrl: imx8mq: Add suspend/resume ops 2019-04-11 15:41:43 +02:00
pinctrl-imx8qm.c pinctrl: imx: add imx8qm driver 2019-01-11 09:25:01 +01:00
pinctrl-imx8qxp.c pinctrl: imx: add imx8qxp driver 2018-11-05 09:33:32 +01:00
pinctrl-imx21.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx23.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx25.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx27.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx28.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx35.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx50.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx51.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-imx53.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-mxs.c pinctrl: freescale: mxs: Add of_node_put() before return 2019-08-06 14:52:24 +02:00
pinctrl-mxs.h pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00
pinctrl-scu.c pinctrl: imx: scu: Align imx sc msg structs to 4 2020-02-21 16:33:27 +01:00
pinctrl-vf610.c pinctrl: freescale: Switch to SPDX identifier 2018-05-24 09:32:58 +02:00