WSL2-Linux-Kernel/sound/soc/blackfin/bf5xx-ssm2602.c

187 строки
4.7 KiB
C

/*
* File: sound/soc/blackfin/bf5xx-ssm2602.c
* Author: Cliff Cai <Cliff.Cai@analog.com>
*
* Created: Tue June 06 2008
* Description: board driver for SSM2602 sound chip
*
* Modified:
* Copyright 2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/pcm_params.h>
#include <asm/dma.h>
#include <asm/portmux.h>
#include <linux/gpio.h>
#include "../codecs/ssm2602.h"
#include "bf5xx-sport.h"
#include "bf5xx-i2s-pcm.h"
#include "bf5xx-i2s.h"
static struct snd_soc_card bf5xx_ssm2602;
static int bf5xx_ssm2602_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
pr_debug("%s enter\n", __func__);
cpu_dai->private_data = sport_handle;
return 0;
}
static int bf5xx_ssm2602_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
unsigned int clk = 0;
int ret = 0;
pr_debug("%s rate %d format %x\n", __func__, params_rate(params),
params_format(params));
/*
* If you are using a crystal source which frequency is not 12MHz
* then modify the below case statement with frequency of the crystal.
*
* If you are using the SPORT to generate clocking then this is
* where to do it.
*/
switch (params_rate(params)) {
case 8000:
case 16000:
case 48000:
case 96000:
case 11025:
case 22050:
case 44100:
clk = 12000000;
break;
}
/*
* CODEC is master for BCLK and LRC in this configuration.
*/
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_sysclk(codec_dai, SSM2602_SYSCLK, clk,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
return 0;
}
static struct snd_soc_ops bf5xx_ssm2602_ops = {
.startup = bf5xx_ssm2602_startup,
.hw_params = bf5xx_ssm2602_hw_params,
};
static struct snd_soc_dai_link bf5xx_ssm2602_dai = {
.name = "ssm2602",
.stream_name = "SSM2602",
.cpu_dai = &bf5xx_i2s_dai,
.codec_dai = &ssm2602_dai,
.ops = &bf5xx_ssm2602_ops,
};
/*
* SSM2602 2 wire address is determined by CSB
* state during powerup.
* low = 0x1a
* high = 0x1b
*/
static struct ssm2602_setup_data bf5xx_ssm2602_setup = {
.i2c_bus = 0,
.i2c_address = 0x1b,
};
static struct snd_soc_card bf5xx_ssm2602 = {
.name = "bf5xx_ssm2602",
.platform = &bf5xx_i2s_soc_platform,
.dai_link = &bf5xx_ssm2602_dai,
.num_links = 1,
};
static struct snd_soc_device bf5xx_ssm2602_snd_devdata = {
.card = &bf5xx_ssm2602,
.codec_dev = &soc_codec_dev_ssm2602,
.codec_data = &bf5xx_ssm2602_setup,
};
static struct platform_device *bf52x_ssm2602_snd_device;
static int __init bf5xx_ssm2602_init(void)
{
int ret;
pr_debug("%s enter\n", __func__);
bf52x_ssm2602_snd_device = platform_device_alloc("soc-audio", -1);
if (!bf52x_ssm2602_snd_device)
return -ENOMEM;
platform_set_drvdata(bf52x_ssm2602_snd_device,
&bf5xx_ssm2602_snd_devdata);
bf5xx_ssm2602_snd_devdata.dev = &bf52x_ssm2602_snd_device->dev;
ret = platform_device_add(bf52x_ssm2602_snd_device);
if (ret)
platform_device_put(bf52x_ssm2602_snd_device);
return ret;
}
static void __exit bf5xx_ssm2602_exit(void)
{
pr_debug("%s enter\n", __func__);
platform_device_unregister(bf52x_ssm2602_snd_device);
}
module_init(bf5xx_ssm2602_init);
module_exit(bf5xx_ssm2602_exit);
/* Module information */
MODULE_AUTHOR("Cliff Cai");
MODULE_DESCRIPTION("ALSA SoC SSM2602 BF527-EZKIT");
MODULE_LICENSE("GPL");