527 строки
15 KiB
C
527 строки
15 KiB
C
/*******************************************************************************
|
|
|
|
Intel 10 Gigabit PCI Express Linux driver
|
|
Copyright(c) 1999 - 2007 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
Linux NICS <linux.nics@intel.com>
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include "ixgbe.h"
|
|
#include "ixgbe_phy.h"
|
|
|
|
#define IXGBE_82598_MAX_TX_QUEUES 32
|
|
#define IXGBE_82598_MAX_RX_QUEUES 64
|
|
#define IXGBE_82598_RAR_ENTRIES 16
|
|
|
|
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw);
|
|
static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
|
|
bool *autoneg);
|
|
static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
|
|
u32 *speed, bool *autoneg);
|
|
static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
|
|
static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw);
|
|
static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
|
|
bool *link_up);
|
|
static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
|
|
bool autoneg,
|
|
bool autoneg_wait_to_complete);
|
|
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
|
|
static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
|
|
bool autoneg,
|
|
bool autoneg_wait_to_complete);
|
|
static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
|
|
|
|
|
|
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
|
|
{
|
|
hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES;
|
|
hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES;
|
|
hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
|
|
|
|
/* PHY ops are filled in by default properly for Fiber only */
|
|
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) {
|
|
hw->mac.ops.setup_link = &ixgbe_setup_copper_link_82598;
|
|
hw->mac.ops.setup_link_speed = &ixgbe_setup_copper_link_speed_82598;
|
|
hw->mac.ops.get_link_settings =
|
|
&ixgbe_get_copper_link_settings_82598;
|
|
|
|
/* Call PHY identify routine to get the phy type */
|
|
ixgbe_identify_phy(hw);
|
|
|
|
switch (hw->phy.type) {
|
|
case ixgbe_phy_tn:
|
|
hw->phy.ops.setup_link = &ixgbe_setup_tnx_phy_link;
|
|
hw->phy.ops.check_link = &ixgbe_check_tnx_phy_link;
|
|
hw->phy.ops.setup_link_speed =
|
|
&ixgbe_setup_tnx_phy_link_speed;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_link_settings_82598 - Determines default link settings
|
|
* @hw: pointer to hardware structure
|
|
* @speed: pointer to link speed
|
|
* @autoneg: boolean auto-negotiation value
|
|
*
|
|
* Determines the default link settings by reading the AUTOC register.
|
|
**/
|
|
static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
|
|
bool *autoneg)
|
|
{
|
|
s32 status = 0;
|
|
s32 autoc_reg;
|
|
|
|
autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
|
|
|
|
if (hw->mac.link_settings_loaded) {
|
|
autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
|
|
autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
|
|
autoc_reg |= hw->mac.link_attach_type;
|
|
autoc_reg |= hw->mac.link_mode_select;
|
|
}
|
|
|
|
switch (autoc_reg & IXGBE_AUTOC_LMS_MASK) {
|
|
case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
*autoneg = false;
|
|
break;
|
|
|
|
case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
|
|
*speed = IXGBE_LINK_SPEED_10GB_FULL;
|
|
*autoneg = false;
|
|
break;
|
|
|
|
case IXGBE_AUTOC_LMS_1G_AN:
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
*autoneg = true;
|
|
break;
|
|
|
|
case IXGBE_AUTOC_LMS_KX4_AN:
|
|
case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
|
|
*speed = IXGBE_LINK_SPEED_UNKNOWN;
|
|
if (autoc_reg & IXGBE_AUTOC_KX4_SUPP)
|
|
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
if (autoc_reg & IXGBE_AUTOC_KX_SUPP)
|
|
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
*autoneg = true;
|
|
break;
|
|
|
|
default:
|
|
status = IXGBE_ERR_LINK_SETUP;
|
|
break;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_copper_link_settings_82598 - Determines default link settings
|
|
* @hw: pointer to hardware structure
|
|
* @speed: pointer to link speed
|
|
* @autoneg: boolean auto-negotiation value
|
|
*
|
|
* Determines the default link settings by reading the AUTOC register.
|
|
**/
|
|
static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
|
|
u32 *speed, bool *autoneg)
|
|
{
|
|
s32 status = IXGBE_ERR_LINK_SETUP;
|
|
u16 speed_ability;
|
|
|
|
*speed = 0;
|
|
*autoneg = true;
|
|
|
|
status = ixgbe_read_phy_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&speed_ability);
|
|
|
|
if (status == 0) {
|
|
if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
|
|
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
|
|
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_media_type_82598 - Determines media type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Returns the media type (fiber, copper, backplane)
|
|
**/
|
|
static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
|
|
{
|
|
enum ixgbe_media_type media_type;
|
|
|
|
/* Media type for I82598 is based on device ID */
|
|
switch (hw->device_id) {
|
|
case IXGBE_DEV_ID_82598AF_DUAL_PORT:
|
|
case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
|
|
case IXGBE_DEV_ID_82598EB_CX4:
|
|
media_type = ixgbe_media_type_fiber;
|
|
break;
|
|
case IXGBE_DEV_ID_82598AT_DUAL_PORT:
|
|
media_type = ixgbe_media_type_copper;
|
|
break;
|
|
default:
|
|
media_type = ixgbe_media_type_unknown;
|
|
break;
|
|
}
|
|
|
|
return media_type;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_mac_link_82598 - Configures MAC link settings
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Configures link settings based on values in the ixgbe_hw struct.
|
|
* Restarts the link. Performs autonegotiation if needed.
|
|
**/
|
|
static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
|
|
{
|
|
u32 autoc_reg;
|
|
u32 links_reg;
|
|
u32 i;
|
|
s32 status = 0;
|
|
|
|
autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
|
|
|
|
if (hw->mac.link_settings_loaded) {
|
|
autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
|
|
autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
|
|
autoc_reg |= hw->mac.link_attach_type;
|
|
autoc_reg |= hw->mac.link_mode_select;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
msleep(50);
|
|
}
|
|
|
|
/* Restart link */
|
|
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
|
|
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
|
|
|
|
/* Only poll for autoneg to complete if specified to do so */
|
|
if (hw->phy.autoneg_wait_to_complete) {
|
|
if (hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN ||
|
|
hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
|
|
links_reg = 0; /* Just in case Autoneg time = 0 */
|
|
for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
|
|
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
|
|
if (links_reg & IXGBE_LINKS_KX_AN_COMP)
|
|
break;
|
|
msleep(100);
|
|
}
|
|
if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
|
|
status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
|
|
hw_dbg(hw,
|
|
"Autonegotiation did not complete.\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* We want to save off the original Flow Control configuration just in
|
|
* case we get disconnected and then reconnected into a different hub
|
|
* or switch with different Flow Control capabilities.
|
|
*/
|
|
hw->fc.type = hw->fc.original_type;
|
|
ixgbe_setup_fc(hw, 0);
|
|
|
|
/* Add delay to filter out noises during initial link setup */
|
|
msleep(50);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_mac_link_82598 - Get link/speed status
|
|
* @hw: pointer to hardware structure
|
|
* @speed: pointer to link speed
|
|
* @link_up: true is link is up, false otherwise
|
|
*
|
|
* Reads the links register to determine if link is up and the current speed
|
|
**/
|
|
static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
|
|
bool *link_up)
|
|
{
|
|
u32 links_reg;
|
|
|
|
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
|
|
|
|
if (links_reg & IXGBE_LINKS_UP)
|
|
*link_up = true;
|
|
else
|
|
*link_up = false;
|
|
|
|
if (links_reg & IXGBE_LINKS_SPEED)
|
|
*speed = IXGBE_LINK_SPEED_10GB_FULL;
|
|
else
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg: true if auto-negotiation enabled
|
|
* @autoneg_wait_to_complete: true if waiting is needed to complete
|
|
*
|
|
* Set the link speed in the AUTOC register and restarts link.
|
|
**/
|
|
static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
|
|
u32 speed, bool autoneg,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
s32 status = 0;
|
|
|
|
/* If speed is 10G, then check for CX4 or XAUI. */
|
|
if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
|
|
(!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4)))
|
|
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
|
|
else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg))
|
|
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
|
|
else if (autoneg) {
|
|
/* BX mode - Autonegotiate 1G */
|
|
if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD))
|
|
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN;
|
|
else /* KX/KX4 mode */
|
|
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN_1G_AN;
|
|
} else {
|
|
status = IXGBE_ERR_LINK_SETUP;
|
|
}
|
|
|
|
if (status == 0) {
|
|
hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete;
|
|
|
|
hw->mac.link_settings_loaded = true;
|
|
/*
|
|
* Setup and restart the link based on the new values in
|
|
* ixgbe_hw This will write the AUTOC register based on the new
|
|
* stored values
|
|
*/
|
|
hw->mac.ops.setup_link(hw);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/**
|
|
* ixgbe_setup_copper_link_82598 - Setup copper link settings
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Configures link settings based on values in the ixgbe_hw struct.
|
|
* Restarts the link. Performs autonegotiation if needed. Restart
|
|
* phy and wait for autonegotiate to finish. Then synchronize the
|
|
* MAC and PHY.
|
|
**/
|
|
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = 0;
|
|
|
|
/* Restart autonegotiation on PHY */
|
|
if (hw->phy.ops.setup_link)
|
|
status = hw->phy.ops.setup_link(hw);
|
|
|
|
/* Set MAC to KX/KX4 autoneg, which defaultis to Parallel detection */
|
|
hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
|
|
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
|
|
|
|
/* Set up MAC */
|
|
hw->mac.ops.setup_link(hw);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg: true if autonegotiation enabled
|
|
* @autoneg_wait_to_complete: true if waiting is needed to complete
|
|
*
|
|
* Sets the link speed in the AUTOC register in the MAC and restarts link.
|
|
**/
|
|
static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
|
|
bool autoneg,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
s32 status = 0;
|
|
|
|
/* Setup the PHY according to input speed */
|
|
if (hw->phy.ops.setup_link_speed)
|
|
status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
|
|
autoneg_wait_to_complete);
|
|
|
|
/* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
|
|
hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
|
|
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
|
|
|
|
/* Set up MAC */
|
|
hw->mac.ops.setup_link(hw);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_hw_82598 - Performs hardware reset
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Resets the hardware by reseting the transmit and receive units, masks and
|
|
* clears all interrupts, performing a PHY reset, and performing a link (MAC)
|
|
* reset.
|
|
**/
|
|
static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = 0;
|
|
u32 ctrl;
|
|
u32 gheccr;
|
|
u32 i;
|
|
u32 autoc;
|
|
u8 analog_val;
|
|
|
|
/* Call adapter stop to disable tx/rx and clear interrupts */
|
|
ixgbe_stop_adapter(hw);
|
|
|
|
/*
|
|
* Power up the Atlas TX lanes if they are currently powered down.
|
|
* Atlas TX lanes are powered down for MAC loopback tests, but
|
|
* they are not automatically restored on reset.
|
|
*/
|
|
ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
|
|
if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
|
|
/* Enable TX Atlas so packets can be transmitted again */
|
|
ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
|
|
ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, analog_val);
|
|
|
|
ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
|
|
ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, analog_val);
|
|
|
|
ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
|
|
ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, analog_val);
|
|
|
|
ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
|
|
ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, analog_val);
|
|
}
|
|
|
|
/* Reset PHY */
|
|
ixgbe_reset_phy(hw);
|
|
|
|
/*
|
|
* Prevent the PCI-E bus from from hanging by disabling PCI-E master
|
|
* access and verify no pending requests before reset
|
|
*/
|
|
if (ixgbe_disable_pcie_master(hw) != 0) {
|
|
status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
|
|
hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
|
|
}
|
|
|
|
/*
|
|
* Issue global reset to the MAC. This needs to be a SW reset.
|
|
* If link reset is used, it might reset the MAC when mng is using it
|
|
*/
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
/* Poll for reset bit to self-clear indicating reset is complete */
|
|
for (i = 0; i < 10; i++) {
|
|
udelay(1);
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
|
|
if (!(ctrl & IXGBE_CTRL_RST))
|
|
break;
|
|
}
|
|
if (ctrl & IXGBE_CTRL_RST) {
|
|
status = IXGBE_ERR_RESET_FAILED;
|
|
hw_dbg(hw, "Reset polling failed to complete.\n");
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
|
|
gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
|
|
IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
|
|
|
|
/*
|
|
* AUTOC register which stores link settings gets cleared
|
|
* and reloaded from EEPROM after reset. We need to restore
|
|
* our stored value from init in case SW changed the attach
|
|
* type or speed. If this is the first time and link settings
|
|
* have not been stored, store default settings from AUTOC.
|
|
*/
|
|
autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
|
|
if (hw->mac.link_settings_loaded) {
|
|
autoc &= ~(IXGBE_AUTOC_LMS_ATTACH_TYPE);
|
|
autoc &= ~(IXGBE_AUTOC_LMS_MASK);
|
|
autoc |= hw->mac.link_attach_type;
|
|
autoc |= hw->mac.link_mode_select;
|
|
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
|
|
} else {
|
|
hw->mac.link_attach_type =
|
|
(autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
|
|
hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK);
|
|
hw->mac.link_settings_loaded = true;
|
|
}
|
|
|
|
/* Store the permanent mac address */
|
|
ixgbe_get_mac_addr(hw, hw->mac.perm_addr);
|
|
|
|
return status;
|
|
}
|
|
|
|
static struct ixgbe_mac_operations mac_ops_82598 = {
|
|
.reset = &ixgbe_reset_hw_82598,
|
|
.get_media_type = &ixgbe_get_media_type_82598,
|
|
.setup_link = &ixgbe_setup_mac_link_82598,
|
|
.check_link = &ixgbe_check_mac_link_82598,
|
|
.setup_link_speed = &ixgbe_setup_mac_link_speed_82598,
|
|
.get_link_settings = &ixgbe_get_link_settings_82598,
|
|
};
|
|
|
|
struct ixgbe_info ixgbe_82598_info = {
|
|
.mac = ixgbe_mac_82598EB,
|
|
.get_invariants = &ixgbe_get_invariants_82598,
|
|
.mac_ops = &mac_ops_82598,
|
|
};
|
|
|