WSL2-Linux-Kernel/drivers/input/touchscreen/usbtouchscreen.c

1602 строки
40 KiB
C

/******************************************************************************
* usbtouchscreen.c
* Driver for USB Touchscreens, supporting those devices:
* - eGalax Touchkit
* includes eTurboTouch CT-410/510/700
* - 3M/Microtouch EX II series
* - ITM
* - PanJit TouchSet
* - eTurboTouch
* - Gunze AHL61
* - DMC TSC-10/25
* - IRTOUCHSYSTEMS/UNITOP
* - IdealTEK URTC1000
* - General Touch
* - GoTop Super_Q2/GogoPen/PenPower tablets
* - JASTEC USB touch controller/DigiTech DTR-02U
* - Zytronic capacitive touchscreen
* - NEXIO/iNexio
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Driver is based on touchkitusb.c
* - ITM parts are from itmtouch.c
* - 3M parts are from mtouchusb.c
* - PanJit parts are from an unmerged driver by Lanslott Gish
* - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
* driver from Marius Vollmer
*
*****************************************************************************/
//#define DEBUG
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
#include <linux/hid.h>
#define DRIVER_VERSION "v0.6"
#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
#define DRIVER_DESC "USB Touchscreen Driver"
static int swap_xy;
module_param(swap_xy, bool, 0644);
MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
static int hwcalib_xy;
module_param(hwcalib_xy, bool, 0644);
MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
/* device specifc data/functions */
struct usbtouch_usb;
struct usbtouch_device_info {
int min_xc, max_xc;
int min_yc, max_yc;
int min_press, max_press;
int rept_size;
/*
* Always service the USB devices irq not just when the input device is
* open. This is useful when devices have a watchdog which prevents us
* from periodically polling the device. Leave this unset unless your
* touchscreen device requires it, as it does consume more of the USB
* bandwidth.
*/
bool irq_always;
void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
/*
* used to get the packet len. possible return values:
* > 0: packet len
* = 0: skip one byte
* < 0: -return value more bytes needed
*/
int (*get_pkt_len) (unsigned char *pkt, int len);
int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt);
int (*alloc) (struct usbtouch_usb *usbtouch);
int (*init) (struct usbtouch_usb *usbtouch);
void (*exit) (struct usbtouch_usb *usbtouch);
};
/* a usbtouch device */
struct usbtouch_usb {
unsigned char *data;
dma_addr_t data_dma;
unsigned char *buffer;
int buf_len;
struct urb *irq;
struct usb_interface *interface;
struct input_dev *input;
struct usbtouch_device_info *type;
char name[128];
char phys[64];
void *priv;
int x, y;
int touch, press;
};
/* device types */
enum {
DEVTYPE_IGNORE = -1,
DEVTYPE_EGALAX,
DEVTYPE_PANJIT,
DEVTYPE_3M,
DEVTYPE_ITM,
DEVTYPE_ETURBO,
DEVTYPE_GUNZE,
DEVTYPE_DMC_TSC10,
DEVTYPE_IRTOUCH,
DEVTYPE_IDEALTEK,
DEVTYPE_GENERAL_TOUCH,
DEVTYPE_GOTOP,
DEVTYPE_JASTEC,
DEVTYPE_E2I,
DEVTYPE_ZYTRONIC,
DEVTYPE_TC45USB,
DEVTYPE_NEXIO,
};
#define USB_DEVICE_HID_CLASS(vend, prod) \
.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
| USB_DEVICE_ID_MATCH_INT_PROTOCOL \
| USB_DEVICE_ID_MATCH_DEVICE, \
.idVendor = (vend), \
.idProduct = (prod), \
.bInterfaceClass = USB_INTERFACE_CLASS_HID, \
.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE
static const struct usb_device_id usbtouch_devices[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
/* ignore the HID capable devices, handled by usbhid */
{USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},
{USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE},
/* normal device IDs */
{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_3M
{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
{USB_DEVICE(0x1391, 0x1000), .driver_info = DEVTYPE_IDEALTEK},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
{USB_DEVICE(0x0dfc, 0x0001), .driver_info = DEVTYPE_GENERAL_TOUCH},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
{USB_DEVICE(0x08f2, 0x007f), .driver_info = DEVTYPE_GOTOP},
{USB_DEVICE(0x08f2, 0x00ce), .driver_info = DEVTYPE_GOTOP},
{USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
{USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_E2I
{USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
{USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
/* TC5UH */
{USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB},
/* TC4UM */
{USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
/* data interface only */
{USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
.driver_info = DEVTYPE_NEXIO},
{USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
.driver_info = DEVTYPE_NEXIO},
#endif
{}
};
/*****************************************************************************
* e2i Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_E2I
static int e2i_init(struct usbtouch_usb *usbtouch)
{
int ret;
struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x01, 0x02, 0x0000, 0x0081,
NULL, 0, USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d",
__func__, ret);
return ret;
}
static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
int tmp = (pkt[0] << 8) | pkt[1];
dev->x = (pkt[2] << 8) | pkt[3];
dev->y = (pkt[4] << 8) | pkt[5];
tmp = tmp - 0xA000;
dev->touch = (tmp > 0);
dev->press = (tmp > 0 ? tmp : 0);
return 1;
}
#endif
/*****************************************************************************
* eGalax part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
#define EGALAX_PKT_TYPE_MASK 0xFE
#define EGALAX_PKT_TYPE_REPT 0x80
#define EGALAX_PKT_TYPE_DIAG 0x0A
static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
return 0;
dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
dev->touch = pkt[0] & 0x01;
return 1;
}
static int egalax_get_pkt_len(unsigned char *buf, int len)
{
switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
case EGALAX_PKT_TYPE_REPT:
return 5;
case EGALAX_PKT_TYPE_DIAG:
if (len < 2)
return -1;
return buf[1] + 2;
}
return 0;
}
#endif
/*****************************************************************************
* PanJit Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
#endif
/*****************************************************************************
* 3M/Microtouch Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_3M
#define MTOUCHUSB_ASYNC_REPORT 1
#define MTOUCHUSB_RESET 7
#define MTOUCHUSB_REQ_CTRLLR_ID 10
static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (hwcalib_xy) {
dev->x = (pkt[4] << 8) | pkt[3];
dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
} else {
dev->x = (pkt[8] << 8) | pkt[7];
dev->y = (pkt[10] << 8) | pkt[9];
}
dev->touch = (pkt[2] & 0x40) ? 1 : 0;
return 1;
}
static int mtouch_init(struct usbtouch_usb *usbtouch)
{
int ret, i;
struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_RESET,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
__func__, ret);
if (ret < 0)
return ret;
msleep(150);
for (i = 0; i < 3; i++) {
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
__func__, ret);
if (ret >= 0)
break;
if (ret != -EPIPE)
return ret;
}
/* Default min/max xy are the raw values, override if using hw-calib */
if (hwcalib_xy) {
input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
}
return 0;
}
#endif
/*****************************************************************************
* ITM Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
int touch;
/*
* ITM devices report invalid x/y data if not touched.
* if the screen was touched before but is not touched any more
* report touch as 0 with the last valid x/y data once. then stop
* reporting data until touched again.
*/
dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
touch = ~pkt[7] & 0x20;
if (!touch) {
if (dev->touch) {
dev->touch = 0;
return 1;
}
return 0;
}
dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
dev->touch = touch;
return 1;
}
#endif
/*****************************************************************************
* eTurboTouch part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
unsigned int shift;
/* packets should start with sync */
if (!(pkt[0] & 0x80))
return 0;
shift = (6 - (pkt[0] & 0x03));
dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
dev->touch = (pkt[0] & 0x10) ? 1 : 0;
return 1;
}
static int eturbo_get_pkt_len(unsigned char *buf, int len)
{
if (buf[0] & 0x80)
return 5;
if (buf[0] == 0x01)
return 3;
return 0;
}
#endif
/*****************************************************************************
* Gunze part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
return 0;
dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
dev->touch = pkt[0] & 0x20;
return 1;
}
#endif
/*****************************************************************************
* DMC TSC-10/25 Part
*
* Documentation about the controller and it's protocol can be found at
* http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
* http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
*/
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
/* supported data rates. currently using 130 */
#define TSC10_RATE_POINT 0x50
#define TSC10_RATE_30 0x40
#define TSC10_RATE_50 0x41
#define TSC10_RATE_80 0x42
#define TSC10_RATE_100 0x43
#define TSC10_RATE_130 0x44
#define TSC10_RATE_150 0x45
/* commands */
#define TSC10_CMD_RESET 0x55
#define TSC10_CMD_RATE 0x05
#define TSC10_CMD_DATA1 0x01
static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
{
struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
int ret = -ENOMEM;
unsigned char *buf;
buf = kmalloc(2, GFP_NOIO);
if (!buf)
goto err_nobuf;
/* reset */
buf[0] = buf[1] = 0xFF;
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_RESET,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
if (ret < 0)
goto err_out;
if (buf[0] != 0x06) {
ret = -ENODEV;
goto err_out;
}
/* set coordinate output rate */
buf[0] = buf[1] = 0xFF;
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_RATE,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
if (ret < 0)
goto err_out;
if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) {
ret = -ENODEV;
goto err_out;
}
/* start sending data */
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_DATA1,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
err_out:
kfree(buf);
err_nobuf:
return ret;
}
static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
#endif
/*****************************************************************************
* IRTOUCH Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = (pkt[3] << 8) | pkt[2];
dev->y = (pkt[5] << 8) | pkt[4];
dev->touch = (pkt[1] & 0x03) ? 1 : 0;
return 1;
}
#endif
/*****************************************************************************
* ET&T TC5UH/TC4UM part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
#endif
/*****************************************************************************
* IdealTEK URTC1000 Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
static int idealtek_get_pkt_len(unsigned char *buf, int len)
{
if (buf[0] & 0x80)
return 5;
if (buf[0] == 0x01)
return len;
return 0;
}
static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
switch (pkt[0] & 0x98) {
case 0x88:
/* touch data in IdealTEK mode */
dev->x = (pkt[1] << 5) | (pkt[2] >> 2);
dev->y = (pkt[3] << 5) | (pkt[4] >> 2);
dev->touch = (pkt[0] & 0x40) ? 1 : 0;
return 1;
case 0x98:
/* touch data in MT emulation mode */
dev->x = (pkt[2] << 5) | (pkt[1] >> 2);
dev->y = (pkt[4] << 5) | (pkt[3] >> 2);
dev->touch = (pkt[0] & 0x40) ? 1 : 0;
return 1;
default:
return 0;
}
}
#endif
/*****************************************************************************
* General Touch Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = (pkt[2] << 8) | pkt[1];
dev->y = (pkt[4] << 8) | pkt[3];
dev->press = pkt[5] & 0xff;
dev->touch = pkt[0] & 0x01;
return 1;
}
#endif
/*****************************************************************************
* GoTop Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[1] & 0x38) << 4) | pkt[2];
dev->y = ((pkt[1] & 0x07) << 7) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
#endif
/*****************************************************************************
* JASTEC Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f);
dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f);
dev->touch = (pkt[0] & 0x40) >> 6;
return 1;
}
#endif
/*****************************************************************************
* Zytronic Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
switch (pkt[0]) {
case 0x3A: /* command response */
dbg("%s: Command response %d", __func__, pkt[1]);
break;
case 0xC0: /* down */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 1;
dbg("%s: down %d,%d", __func__, dev->x, dev->y);
return 1;
case 0x80: /* up */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 0;
dbg("%s: up %d,%d", __func__, dev->x, dev->y);
return 1;
default:
dbg("%s: Unknown return %d", __func__, pkt[0]);
break;
}
return 0;
}
#endif
/*****************************************************************************
* NEXIO Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
#define NEXIO_TIMEOUT 5000
#define NEXIO_BUFSIZE 1024
#define NEXIO_THRESHOLD 50
struct nexio_priv {
struct urb *ack;
unsigned char *ack_buf;
};
struct nexio_touch_packet {
u8 flags; /* 0xe1 = touch, 0xe1 = release */
__be16 data_len; /* total bytes of touch data */
__be16 x_len; /* bytes for X axis */
__be16 y_len; /* bytes for Y axis */
u8 data[];
} __attribute__ ((packed));
static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
static void nexio_ack_complete(struct urb *urb)
{
}
static int nexio_alloc(struct usbtouch_usb *usbtouch)
{
struct nexio_priv *priv;
int ret = -ENOMEM;
usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
if (!usbtouch->priv)
goto out_buf;
priv = usbtouch->priv;
priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
GFP_KERNEL);
if (!priv->ack_buf)
goto err_priv;
priv->ack = usb_alloc_urb(0, GFP_KERNEL);
if (!priv->ack) {
dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
goto err_ack_buf;
}
return 0;
err_ack_buf:
kfree(priv->ack_buf);
err_priv:
kfree(priv);
out_buf:
return ret;
}
static int nexio_init(struct usbtouch_usb *usbtouch)
{
struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
struct nexio_priv *priv = usbtouch->priv;
int ret = -ENOMEM;
int actual_len, i;
unsigned char *buf;
char *firmware_ver = NULL, *device_name = NULL;
int input_ep = 0, output_ep = 0;
/* find first input and output endpoint */
for (i = 0; i < interface->desc.bNumEndpoints; i++) {
if (!input_ep &&
usb_endpoint_dir_in(&interface->endpoint[i].desc))
input_ep = interface->endpoint[i].desc.bEndpointAddress;
if (!output_ep &&
usb_endpoint_dir_out(&interface->endpoint[i].desc))
output_ep = interface->endpoint[i].desc.bEndpointAddress;
}
if (!input_ep || !output_ep)
return -ENXIO;
buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO);
if (!buf)
goto out_buf;
/* two empty reads */
for (i = 0; i < 2; i++) {
ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
buf, NEXIO_BUFSIZE, &actual_len,
NEXIO_TIMEOUT);
if (ret < 0)
goto out_buf;
}
/* send init command */
memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
buf, sizeof(nexio_init_pkt), &actual_len,
NEXIO_TIMEOUT);
if (ret < 0)
goto out_buf;
/* read replies */
for (i = 0; i < 3; i++) {
memset(buf, 0, NEXIO_BUFSIZE);
ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
buf, NEXIO_BUFSIZE, &actual_len,
NEXIO_TIMEOUT);
if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
continue;
switch (buf[0]) {
case 0x83: /* firmware version */
if (!firmware_ver)
firmware_ver = kstrdup(&buf[2], GFP_NOIO);
break;
case 0x84: /* device name */
if (!device_name)
device_name = kstrdup(&buf[2], GFP_NOIO);
break;
}
}
printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
device_name, firmware_ver);
kfree(firmware_ver);
kfree(device_name);
usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
priv->ack_buf, sizeof(nexio_ack_pkt),
nexio_ack_complete, usbtouch);
ret = 0;
out_buf:
kfree(buf);
return ret;
}
static void nexio_exit(struct usbtouch_usb *usbtouch)
{
struct nexio_priv *priv = usbtouch->priv;
usb_kill_urb(priv->ack);
usb_free_urb(priv->ack);
kfree(priv->ack_buf);
kfree(priv);
}
static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
{
struct nexio_touch_packet *packet = (void *) pkt;
struct nexio_priv *priv = usbtouch->priv;
unsigned int data_len = be16_to_cpu(packet->data_len);
unsigned int x_len = be16_to_cpu(packet->x_len);
unsigned int y_len = be16_to_cpu(packet->y_len);
int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
/* got touch data? */
if ((pkt[0] & 0xe0) != 0xe0)
return 0;
if (data_len > 0xff)
data_len -= 0x100;
if (x_len > 0xff)
x_len -= 0x80;
/* send ACK */
ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
if (!usbtouch->type->max_xc) {
usbtouch->type->max_xc = 2 * x_len;
input_set_abs_params(usbtouch->input, ABS_X,
0, usbtouch->type->max_xc, 0, 0);
usbtouch->type->max_yc = 2 * y_len;
input_set_abs_params(usbtouch->input, ABS_Y,
0, usbtouch->type->max_yc, 0, 0);
}
/*
* The device reports state of IR sensors on X and Y axes.
* Each byte represents "darkness" percentage (0-100) of one element.
* 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
* This also means that there's a limited multi-touch capability but
* it's disabled (and untested) here as there's no X driver for that.
*/
begin_x = end_x = begin_y = end_y = -1;
for (x = 0; x < x_len; x++) {
if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
begin_x = x;
continue;
}
if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
end_x = x - 1;
for (y = x_len; y < data_len; y++) {
if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
begin_y = y - x_len;
continue;
}
if (end_y == -1 &&
begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
end_y = y - 1 - x_len;
w = end_x - begin_x;
h = end_y - begin_y;
#if 0
/* multi-touch */
input_report_abs(usbtouch->input,
ABS_MT_TOUCH_MAJOR, max(w,h));
input_report_abs(usbtouch->input,
ABS_MT_TOUCH_MINOR, min(x,h));
input_report_abs(usbtouch->input,
ABS_MT_POSITION_X, 2*begin_x+w);
input_report_abs(usbtouch->input,
ABS_MT_POSITION_Y, 2*begin_y+h);
input_report_abs(usbtouch->input,
ABS_MT_ORIENTATION, w > h);
input_mt_sync(usbtouch->input);
#endif
/* single touch */
usbtouch->x = 2 * begin_x + w;
usbtouch->y = 2 * begin_y + h;
usbtouch->touch = packet->flags & 0x01;
begin_y = end_y = -1;
return 1;
}
}
begin_x = end_x = -1;
}
}
return 0;
}
#endif
/*****************************************************************************
* the different device descriptors
*/
#ifdef MULTI_PACKET
static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
unsigned char *pkt, int len);
#endif
static struct usbtouch_device_info usbtouch_dev_info[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
[DEVTYPE_EGALAX] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
.min_yc = 0x0,
.max_yc = 0x07ff,
.rept_size = 16,
.process_pkt = usbtouch_process_multi,
.get_pkt_len = egalax_get_pkt_len,
.read_data = egalax_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
[DEVTYPE_PANJIT] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.read_data = panjit_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_3M
[DEVTYPE_3M] = {
.min_xc = 0x0,
.max_xc = 0x4000,
.min_yc = 0x0,
.max_yc = 0x4000,
.rept_size = 11,
.read_data = mtouch_read_data,
.init = mtouch_init,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
[DEVTYPE_ITM] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.max_press = 0xff,
.rept_size = 8,
.read_data = itm_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
[DEVTYPE_ETURBO] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
.min_yc = 0x0,
.max_yc = 0x07ff,
.rept_size = 8,
.process_pkt = usbtouch_process_multi,
.get_pkt_len = eturbo_get_pkt_len,
.read_data = eturbo_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
[DEVTYPE_GUNZE] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 4,
.read_data = gunze_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
[DEVTYPE_DMC_TSC10] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 5,
.init = dmc_tsc10_init,
.read_data = dmc_tsc10_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
[DEVTYPE_IRTOUCH] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.read_data = irtouch_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
[DEVTYPE_IDEALTEK] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.process_pkt = usbtouch_process_multi,
.get_pkt_len = idealtek_get_pkt_len,
.read_data = idealtek_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
[DEVTYPE_GENERAL_TOUCH] = {
.min_xc = 0x0,
.max_xc = 0x7fff,
.min_yc = 0x0,
.max_yc = 0x7fff,
.rept_size = 7,
.read_data = general_touch_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
[DEVTYPE_GOTOP] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 4,
.read_data = gotop_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
[DEVTYPE_JASTEC] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 4,
.read_data = jastec_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_E2I
[DEVTYPE_E2I] = {
.min_xc = 0x0,
.max_xc = 0x7fff,
.min_yc = 0x0,
.max_yc = 0x7fff,
.rept_size = 6,
.init = e2i_init,
.read_data = e2i_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
[DEVTYPE_ZYTRONIC] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 5,
.read_data = zytronic_read_data,
.irq_always = true,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
[DEVTYPE_TC45USB] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 5,
.read_data = tc45usb_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
[DEVTYPE_NEXIO] = {
.rept_size = 1024,
.irq_always = true,
.read_data = nexio_read_data,
.alloc = nexio_alloc,
.init = nexio_init,
.exit = nexio_exit,
},
#endif
};
/*****************************************************************************
* Generic Part
*/
static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
unsigned char *pkt, int len)
{
struct usbtouch_device_info *type = usbtouch->type;
if (!type->read_data(usbtouch, pkt))
return;
input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
if (swap_xy) {
input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
} else {
input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
}
if (type->max_press)
input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
input_sync(usbtouch->input);
}
#ifdef MULTI_PACKET
static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
unsigned char *pkt, int len)
{
unsigned char *buffer;
int pkt_len, pos, buf_len, tmp;
/* process buffer */
if (unlikely(usbtouch->buf_len)) {
/* try to get size */
pkt_len = usbtouch->type->get_pkt_len(
usbtouch->buffer, usbtouch->buf_len);
/* drop? */
if (unlikely(!pkt_len))
goto out_flush_buf;
/* need to append -pkt_len bytes before able to get size */
if (unlikely(pkt_len < 0)) {
int append = -pkt_len;
if (unlikely(append > len))
append = len;
if (usbtouch->buf_len + append >= usbtouch->type->rept_size)
goto out_flush_buf;
memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);
usbtouch->buf_len += append;
pkt_len = usbtouch->type->get_pkt_len(
usbtouch->buffer, usbtouch->buf_len);
if (pkt_len < 0)
return;
}
/* append */
tmp = pkt_len - usbtouch->buf_len;
if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
goto out_flush_buf;
memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);
buffer = pkt + tmp;
buf_len = len - tmp;
} else {
buffer = pkt;
buf_len = len;
}
/* loop over the received packet, process */
pos = 0;
while (pos < buf_len) {
/* get packet len */
pkt_len = usbtouch->type->get_pkt_len(buffer + pos,
buf_len - pos);
/* unknown packet: skip one byte */
if (unlikely(!pkt_len)) {
pos++;
continue;
}
/* full packet: process */
if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);
} else {
/* incomplete packet: save in buffer */
memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
usbtouch->buf_len = buf_len - pos;
return;
}
pos += pkt_len;
}
out_flush_buf:
usbtouch->buf_len = 0;
return;
}
#endif
static void usbtouch_irq(struct urb *urb)
{
struct usbtouch_usb *usbtouch = urb->context;
int retval;
switch (urb->status) {
case 0:
/* success */
break;
case -ETIME:
/* this urb is timing out */
dbg("%s - urb timed out - was the device unplugged?",
__func__);
return;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
case -EPIPE:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__func__, urb->status);
return;
default:
dbg("%s - nonzero urb status received: %d",
__func__, urb->status);
goto exit;
}
usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
exit:
usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
err("%s - usb_submit_urb failed with result: %d",
__func__, retval);
}
static int usbtouch_open(struct input_dev *input)
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
int r;
usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);
r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0;
if (r < 0)
goto out;
if (!usbtouch->type->irq_always) {
if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) {
r = -EIO;
goto out_put;
}
}
usbtouch->interface->needs_remote_wakeup = 1;
out_put:
usb_autopm_put_interface(usbtouch->interface);
out:
return r;
}
static void usbtouch_close(struct input_dev *input)
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
int r;
if (!usbtouch->type->irq_always)
usb_kill_urb(usbtouch->irq);
r = usb_autopm_get_interface(usbtouch->interface);
usbtouch->interface->needs_remote_wakeup = 0;
if (!r)
usb_autopm_put_interface(usbtouch->interface);
}
static int usbtouch_suspend
(struct usb_interface *intf, pm_message_t message)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
usb_kill_urb(usbtouch->irq);
return 0;
}
static int usbtouch_resume(struct usb_interface *intf)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
struct input_dev *input = usbtouch->input;
int result = 0;
mutex_lock(&input->mutex);
if (input->users || usbtouch->type->irq_always)
result = usb_submit_urb(usbtouch->irq, GFP_NOIO);
mutex_unlock(&input->mutex);
return result;
}
static int usbtouch_reset_resume(struct usb_interface *intf)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
struct input_dev *input = usbtouch->input;
int err = 0;
/* reinit the device */
if (usbtouch->type->init) {
err = usbtouch->type->init(usbtouch);
if (err) {
dbg("%s - type->init() failed, err: %d",
__func__, err);
return err;
}
}
/* restart IO if needed */
mutex_lock(&input->mutex);
if (input->users)
err = usb_submit_urb(usbtouch->irq, GFP_NOIO);
mutex_unlock(&input->mutex);
return err;
}
static void usbtouch_free_buffers(struct usb_device *udev,
struct usbtouch_usb *usbtouch)
{
usb_free_coherent(udev, usbtouch->type->rept_size,
usbtouch->data, usbtouch->data_dma);
kfree(usbtouch->buffer);
}
static struct usb_endpoint_descriptor *
usbtouch_get_input_endpoint(struct usb_host_interface *interface)
{
int i;
for (i = 0; i < interface->desc.bNumEndpoints; i++)
if (usb_endpoint_dir_in(&interface->endpoint[i].desc))
return &interface->endpoint[i].desc;
return NULL;
}
static int usbtouch_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usbtouch_usb *usbtouch;
struct input_dev *input_dev;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
struct usbtouch_device_info *type;
int err = -ENOMEM;
/* some devices are ignored */
if (id->driver_info == DEVTYPE_IGNORE)
return -ENODEV;
endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting);
if (!endpoint)
return -ENXIO;
usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
input_dev = input_allocate_device();
if (!usbtouch || !input_dev)
goto out_free;
type = &usbtouch_dev_info[id->driver_info];
usbtouch->type = type;
if (!type->process_pkt)
type->process_pkt = usbtouch_process_pkt;
usbtouch->data = usb_alloc_coherent(udev, type->rept_size,
GFP_KERNEL, &usbtouch->data_dma);
if (!usbtouch->data)
goto out_free;
if (type->get_pkt_len) {
usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
if (!usbtouch->buffer)
goto out_free_buffers;
}
usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!usbtouch->irq) {
dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__);
goto out_free_buffers;
}
usbtouch->interface = intf;
usbtouch->input = input_dev;
if (udev->manufacturer)
strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
if (udev->product) {
if (udev->manufacturer)
strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
}
if (!strlen(usbtouch->name))
snprintf(usbtouch->name, sizeof(usbtouch->name),
"USB Touchscreen %04x:%04x",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
input_dev->name = usbtouch->name;
input_dev->phys = usbtouch->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &intf->dev;
input_set_drvdata(input_dev, usbtouch);
input_dev->open = usbtouch_open;
input_dev->close = usbtouch_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
if (type->max_press)
input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
type->max_press, 0, 0);
if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
usb_fill_int_urb(usbtouch->irq, udev,
usb_rcvintpipe(udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
else
usb_fill_bulk_urb(usbtouch->irq, udev,
usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch);
usbtouch->irq->dev = udev;
usbtouch->irq->transfer_dma = usbtouch->data_dma;
usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* device specific allocations */
if (type->alloc) {
err = type->alloc(usbtouch);
if (err) {
dbg("%s - type->alloc() failed, err: %d", __func__, err);
goto out_free_urb;
}
}
/* device specific initialisation*/
if (type->init) {
err = type->init(usbtouch);
if (err) {
dbg("%s - type->init() failed, err: %d", __func__, err);
goto out_do_exit;
}
}
err = input_register_device(usbtouch->input);
if (err) {
dbg("%s - input_register_device failed, err: %d", __func__, err);
goto out_do_exit;
}
usb_set_intfdata(intf, usbtouch);
if (usbtouch->type->irq_always) {
/* this can't fail */
usb_autopm_get_interface(intf);
err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
if (err) {
usb_autopm_put_interface(intf);
err("%s - usb_submit_urb failed with result: %d",
__func__, err);
goto out_unregister_input;
}
}
return 0;
out_unregister_input:
input_unregister_device(input_dev);
input_dev = NULL;
out_do_exit:
if (type->exit)
type->exit(usbtouch);
out_free_urb:
usb_free_urb(usbtouch->irq);
out_free_buffers:
usbtouch_free_buffers(udev, usbtouch);
out_free:
input_free_device(input_dev);
kfree(usbtouch);
return err;
}
static void usbtouch_disconnect(struct usb_interface *intf)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
dbg("%s - called", __func__);
if (!usbtouch)
return;
dbg("%s - usbtouch is initialized, cleaning up", __func__);
usb_set_intfdata(intf, NULL);
/* this will stop IO via close */
input_unregister_device(usbtouch->input);
usb_free_urb(usbtouch->irq);
if (usbtouch->type->exit)
usbtouch->type->exit(usbtouch);
usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
kfree(usbtouch);
}
MODULE_DEVICE_TABLE(usb, usbtouch_devices);
static struct usb_driver usbtouch_driver = {
.name = "usbtouchscreen",
.probe = usbtouch_probe,
.disconnect = usbtouch_disconnect,
.suspend = usbtouch_suspend,
.resume = usbtouch_resume,
.reset_resume = usbtouch_reset_resume,
.id_table = usbtouch_devices,
.supports_autosuspend = 1,
};
static int __init usbtouch_init(void)
{
return usb_register(&usbtouch_driver);
}
static void __exit usbtouch_cleanup(void)
{
usb_deregister(&usbtouch_driver);
}
module_init(usbtouch_init);
module_exit(usbtouch_cleanup);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("touchkitusb");
MODULE_ALIAS("itmtouch");
MODULE_ALIAS("mtouchusb");