449 строки
12 KiB
C
449 строки
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*****************************************************************************
|
|
*
|
|
* Copyright (C) 2008 Cedric Bregardis <cedric.bregardis@free.fr> and
|
|
* Jean-Christian Hassler <jhassler@free.fr>
|
|
*
|
|
* This file is part of the Audiowerk2 ALSA driver
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#define AW2_SAA7146_M
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <sound/core.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
|
|
#include "saa7146.h"
|
|
#include "aw2-saa7146.h"
|
|
|
|
#include "aw2-tsl.c"
|
|
|
|
#define WRITEREG(value, addr) writel((value), chip->base_addr + (addr))
|
|
#define READREG(addr) readl(chip->base_addr + (addr))
|
|
|
|
static struct snd_aw2_saa7146_cb_param
|
|
arr_substream_it_playback_cb[NB_STREAM_PLAYBACK];
|
|
static struct snd_aw2_saa7146_cb_param
|
|
arr_substream_it_capture_cb[NB_STREAM_CAPTURE];
|
|
|
|
static int snd_aw2_saa7146_get_limit(int size);
|
|
|
|
/* chip-specific destructor */
|
|
int snd_aw2_saa7146_free(struct snd_aw2_saa7146 *chip)
|
|
{
|
|
/* disable all irqs */
|
|
WRITEREG(0, IER);
|
|
|
|
/* reset saa7146 */
|
|
WRITEREG((MRST_N << 16), MC1);
|
|
|
|
/* Unset base addr */
|
|
chip->base_addr = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
|
|
void __iomem *pci_base_addr)
|
|
{
|
|
/* set PCI burst/threshold
|
|
|
|
Burst length definition
|
|
VALUE BURST LENGTH
|
|
000 1 Dword
|
|
001 2 Dwords
|
|
010 4 Dwords
|
|
011 8 Dwords
|
|
100 16 Dwords
|
|
101 32 Dwords
|
|
110 64 Dwords
|
|
111 128 Dwords
|
|
|
|
Threshold definition
|
|
VALUE WRITE MODE READ MODE
|
|
00 1 Dword of valid data 1 empty Dword
|
|
01 4 Dwords of valid data 4 empty Dwords
|
|
10 8 Dwords of valid data 8 empty Dwords
|
|
11 16 Dwords of valid data 16 empty Dwords */
|
|
|
|
unsigned int acon2;
|
|
unsigned int acon1 = 0;
|
|
int i;
|
|
|
|
/* Set base addr */
|
|
chip->base_addr = pci_base_addr;
|
|
|
|
/* disable all irqs */
|
|
WRITEREG(0, IER);
|
|
|
|
/* reset saa7146 */
|
|
WRITEREG((MRST_N << 16), MC1);
|
|
|
|
/* enable audio interface */
|
|
#ifdef __BIG_ENDIAN
|
|
acon1 |= A1_SWAP;
|
|
acon1 |= A2_SWAP;
|
|
#endif
|
|
/* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
|
|
|
|
/* At initialization WS1 and WS2 are disabled (configured as input) */
|
|
acon1 |= 0 * WS1_CTRL;
|
|
acon1 |= 0 * WS2_CTRL;
|
|
|
|
/* WS4 is not used. So it must not restart A2.
|
|
This is why it is configured as output (force to low) */
|
|
acon1 |= 3 * WS4_CTRL;
|
|
|
|
/* WS3_CTRL, WS3_SYNC: output TSL2, I2S */
|
|
acon1 |= 2 * WS3_CTRL;
|
|
|
|
/* A1 and A2 are active and asynchronous */
|
|
acon1 |= 3 * AUDIO_MODE;
|
|
WRITEREG(acon1, ACON1);
|
|
|
|
/* The following comes from original windows driver.
|
|
It is needed to have a correct behavior of input and output
|
|
simultenously, but I don't know why ! */
|
|
WRITEREG(3 * (BurstA1_in) + 3 * (ThreshA1_in) +
|
|
3 * (BurstA1_out) + 3 * (ThreshA1_out) +
|
|
3 * (BurstA2_out) + 3 * (ThreshA2_out), PCI_BT_A);
|
|
|
|
/* enable audio port pins */
|
|
WRITEREG((EAP << 16) | EAP, MC1);
|
|
|
|
/* enable I2C */
|
|
WRITEREG((EI2C << 16) | EI2C, MC1);
|
|
/* enable interrupts */
|
|
WRITEREG(A1_out | A2_out | A1_in | IIC_S | IIC_E, IER);
|
|
|
|
/* audio configuration */
|
|
acon2 = A2_CLKSRC | BCLK1_OEN;
|
|
WRITEREG(acon2, ACON2);
|
|
|
|
/* By default use analog input */
|
|
snd_aw2_saa7146_use_digital_input(chip, 0);
|
|
|
|
/* TSL setup */
|
|
for (i = 0; i < 8; ++i) {
|
|
WRITEREG(tsl1[i], TSL1 + (i * 4));
|
|
WRITEREG(tsl2[i], TSL2 + (i * 4));
|
|
}
|
|
|
|
}
|
|
|
|
void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146 *chip,
|
|
int stream_number,
|
|
unsigned long dma_addr,
|
|
unsigned long period_size,
|
|
unsigned long buffer_size)
|
|
{
|
|
unsigned long dw_page, dw_limit;
|
|
|
|
/* Configure DMA for substream
|
|
Configuration informations: ALSA has allocated continuous memory
|
|
pages. So we don't need to use MMU of saa7146.
|
|
*/
|
|
|
|
/* No MMU -> nothing to do with PageA1, we only configure the limit of
|
|
PageAx_out register */
|
|
/* Disable MMU */
|
|
dw_page = (0L << 11);
|
|
|
|
/* Configure Limit for DMA access.
|
|
The limit register defines an address limit, which generates
|
|
an interrupt if passed by the actual PCI address pointer.
|
|
'0001' means an interrupt will be generated if the lower
|
|
6 bits (64 bytes) of the PCI address are zero. '0010'
|
|
defines a limit of 128 bytes, '0011' one of 256 bytes, and
|
|
so on up to 1 Mbyte defined by '1111'. This interrupt range
|
|
can be calculated as follows:
|
|
Range = 2^(5 + Limit) bytes.
|
|
*/
|
|
dw_limit = snd_aw2_saa7146_get_limit(period_size);
|
|
dw_page |= (dw_limit << 4);
|
|
|
|
if (stream_number == 0) {
|
|
WRITEREG(dw_page, PageA2_out);
|
|
|
|
/* Base address for DMA transfert. */
|
|
/* This address has been reserved by ALSA. */
|
|
/* This is a physical address */
|
|
WRITEREG(dma_addr, BaseA2_out);
|
|
|
|
/* Define upper limit for DMA access */
|
|
WRITEREG(dma_addr + buffer_size, ProtA2_out);
|
|
|
|
} else if (stream_number == 1) {
|
|
WRITEREG(dw_page, PageA1_out);
|
|
|
|
/* Base address for DMA transfert. */
|
|
/* This address has been reserved by ALSA. */
|
|
/* This is a physical address */
|
|
WRITEREG(dma_addr, BaseA1_out);
|
|
|
|
/* Define upper limit for DMA access */
|
|
WRITEREG(dma_addr + buffer_size, ProtA1_out);
|
|
} else {
|
|
pr_err("aw2: snd_aw2_saa7146_pcm_init_playback: "
|
|
"Substream number is not 0 or 1 -> not managed\n");
|
|
}
|
|
}
|
|
|
|
void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146 *chip,
|
|
int stream_number, unsigned long dma_addr,
|
|
unsigned long period_size,
|
|
unsigned long buffer_size)
|
|
{
|
|
unsigned long dw_page, dw_limit;
|
|
|
|
/* Configure DMA for substream
|
|
Configuration informations: ALSA has allocated continuous memory
|
|
pages. So we don't need to use MMU of saa7146.
|
|
*/
|
|
|
|
/* No MMU -> nothing to do with PageA1, we only configure the limit of
|
|
PageAx_out register */
|
|
/* Disable MMU */
|
|
dw_page = (0L << 11);
|
|
|
|
/* Configure Limit for DMA access.
|
|
The limit register defines an address limit, which generates
|
|
an interrupt if passed by the actual PCI address pointer.
|
|
'0001' means an interrupt will be generated if the lower
|
|
6 bits (64 bytes) of the PCI address are zero. '0010'
|
|
defines a limit of 128 bytes, '0011' one of 256 bytes, and
|
|
so on up to 1 Mbyte defined by '1111'. This interrupt range
|
|
can be calculated as follows:
|
|
Range = 2^(5 + Limit) bytes.
|
|
*/
|
|
dw_limit = snd_aw2_saa7146_get_limit(period_size);
|
|
dw_page |= (dw_limit << 4);
|
|
|
|
if (stream_number == 0) {
|
|
WRITEREG(dw_page, PageA1_in);
|
|
|
|
/* Base address for DMA transfert. */
|
|
/* This address has been reserved by ALSA. */
|
|
/* This is a physical address */
|
|
WRITEREG(dma_addr, BaseA1_in);
|
|
|
|
/* Define upper limit for DMA access */
|
|
WRITEREG(dma_addr + buffer_size, ProtA1_in);
|
|
} else {
|
|
pr_err("aw2: snd_aw2_saa7146_pcm_init_capture: "
|
|
"Substream number is not 0 -> not managed\n");
|
|
}
|
|
}
|
|
|
|
void snd_aw2_saa7146_define_it_playback_callback(unsigned int stream_number,
|
|
snd_aw2_saa7146_it_cb
|
|
p_it_callback,
|
|
void *p_callback_param)
|
|
{
|
|
if (stream_number < NB_STREAM_PLAYBACK) {
|
|
arr_substream_it_playback_cb[stream_number].p_it_callback =
|
|
(snd_aw2_saa7146_it_cb) p_it_callback;
|
|
arr_substream_it_playback_cb[stream_number].p_callback_param =
|
|
(void *)p_callback_param;
|
|
}
|
|
}
|
|
|
|
void snd_aw2_saa7146_define_it_capture_callback(unsigned int stream_number,
|
|
snd_aw2_saa7146_it_cb
|
|
p_it_callback,
|
|
void *p_callback_param)
|
|
{
|
|
if (stream_number < NB_STREAM_CAPTURE) {
|
|
arr_substream_it_capture_cb[stream_number].p_it_callback =
|
|
(snd_aw2_saa7146_it_cb) p_it_callback;
|
|
arr_substream_it_capture_cb[stream_number].p_callback_param =
|
|
(void *)p_callback_param;
|
|
}
|
|
}
|
|
|
|
void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146 *chip,
|
|
int stream_number)
|
|
{
|
|
unsigned int acon1 = 0;
|
|
/* In aw8 driver, dma transfert is always active. It is
|
|
started and stopped in a larger "space" */
|
|
acon1 = READREG(ACON1);
|
|
if (stream_number == 0) {
|
|
WRITEREG((TR_E_A2_OUT << 16) | TR_E_A2_OUT, MC1);
|
|
|
|
/* WS2_CTRL, WS2_SYNC: output TSL2, I2S */
|
|
acon1 |= 2 * WS2_CTRL;
|
|
WRITEREG(acon1, ACON1);
|
|
|
|
} else if (stream_number == 1) {
|
|
WRITEREG((TR_E_A1_OUT << 16) | TR_E_A1_OUT, MC1);
|
|
|
|
/* WS1_CTRL, WS1_SYNC: output TSL1, I2S */
|
|
acon1 |= 1 * WS1_CTRL;
|
|
WRITEREG(acon1, ACON1);
|
|
}
|
|
}
|
|
|
|
void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146 *chip,
|
|
int stream_number)
|
|
{
|
|
unsigned int acon1 = 0;
|
|
acon1 = READREG(ACON1);
|
|
if (stream_number == 0) {
|
|
/* WS2_CTRL, WS2_SYNC: output TSL2, I2S */
|
|
acon1 &= ~(3 * WS2_CTRL);
|
|
WRITEREG(acon1, ACON1);
|
|
|
|
WRITEREG((TR_E_A2_OUT << 16), MC1);
|
|
} else if (stream_number == 1) {
|
|
/* WS1_CTRL, WS1_SYNC: output TSL1, I2S */
|
|
acon1 &= ~(3 * WS1_CTRL);
|
|
WRITEREG(acon1, ACON1);
|
|
|
|
WRITEREG((TR_E_A1_OUT << 16), MC1);
|
|
}
|
|
}
|
|
|
|
void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146 *chip,
|
|
int stream_number)
|
|
{
|
|
/* In aw8 driver, dma transfert is always active. It is
|
|
started and stopped in a larger "space" */
|
|
if (stream_number == 0)
|
|
WRITEREG((TR_E_A1_IN << 16) | TR_E_A1_IN, MC1);
|
|
}
|
|
|
|
void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146 *chip,
|
|
int stream_number)
|
|
{
|
|
if (stream_number == 0)
|
|
WRITEREG((TR_E_A1_IN << 16), MC1);
|
|
}
|
|
|
|
irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id)
|
|
{
|
|
unsigned int isr;
|
|
__always_unused unsigned int iicsta;
|
|
struct snd_aw2_saa7146 *chip = dev_id;
|
|
|
|
isr = READREG(ISR);
|
|
if (!isr)
|
|
return IRQ_NONE;
|
|
|
|
WRITEREG(isr, ISR);
|
|
|
|
if (isr & (IIC_S | IIC_E)) {
|
|
iicsta = READREG(IICSTA);
|
|
WRITEREG(0x100, IICSTA);
|
|
}
|
|
|
|
if (isr & A1_out) {
|
|
if (arr_substream_it_playback_cb[1].p_it_callback != NULL) {
|
|
arr_substream_it_playback_cb[1].
|
|
p_it_callback(arr_substream_it_playback_cb[1].
|
|
p_callback_param);
|
|
}
|
|
}
|
|
if (isr & A2_out) {
|
|
if (arr_substream_it_playback_cb[0].p_it_callback != NULL) {
|
|
arr_substream_it_playback_cb[0].
|
|
p_it_callback(arr_substream_it_playback_cb[0].
|
|
p_callback_param);
|
|
}
|
|
|
|
}
|
|
if (isr & A1_in) {
|
|
if (arr_substream_it_capture_cb[0].p_it_callback != NULL) {
|
|
arr_substream_it_capture_cb[0].
|
|
p_it_callback(arr_substream_it_capture_cb[0].
|
|
p_callback_param);
|
|
}
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
unsigned int snd_aw2_saa7146_get_hw_ptr_playback(struct snd_aw2_saa7146 *chip,
|
|
int stream_number,
|
|
unsigned char *start_addr,
|
|
unsigned int buffer_size)
|
|
{
|
|
long pci_adp = 0;
|
|
size_t ptr = 0;
|
|
|
|
if (stream_number == 0) {
|
|
pci_adp = READREG(PCI_ADP3);
|
|
ptr = pci_adp - (long)start_addr;
|
|
|
|
if (ptr == buffer_size)
|
|
ptr = 0;
|
|
}
|
|
if (stream_number == 1) {
|
|
pci_adp = READREG(PCI_ADP1);
|
|
ptr = pci_adp - (size_t) start_addr;
|
|
|
|
if (ptr == buffer_size)
|
|
ptr = 0;
|
|
}
|
|
return ptr;
|
|
}
|
|
|
|
unsigned int snd_aw2_saa7146_get_hw_ptr_capture(struct snd_aw2_saa7146 *chip,
|
|
int stream_number,
|
|
unsigned char *start_addr,
|
|
unsigned int buffer_size)
|
|
{
|
|
size_t pci_adp = 0;
|
|
size_t ptr = 0;
|
|
if (stream_number == 0) {
|
|
pci_adp = READREG(PCI_ADP2);
|
|
ptr = pci_adp - (size_t) start_addr;
|
|
|
|
if (ptr == buffer_size)
|
|
ptr = 0;
|
|
}
|
|
return ptr;
|
|
}
|
|
|
|
void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146 *chip,
|
|
int use_digital)
|
|
{
|
|
/* FIXME: switch between analog and digital input does not always work.
|
|
It can produce a kind of white noise. It seams that received data
|
|
are inverted sometime (endian inversion). Why ? I don't know, maybe
|
|
a problem of synchronization... However for the time being I have
|
|
not found the problem. Workaround: switch again (and again) between
|
|
digital and analog input until it works. */
|
|
if (use_digital)
|
|
WRITEREG(0x40, GPIO_CTRL);
|
|
else
|
|
WRITEREG(0x50, GPIO_CTRL);
|
|
}
|
|
|
|
int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146 *chip)
|
|
{
|
|
unsigned int reg_val = READREG(GPIO_CTRL);
|
|
if ((reg_val & 0xFF) == 0x40)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int snd_aw2_saa7146_get_limit(int size)
|
|
{
|
|
int limitsize = 32;
|
|
int limit = 0;
|
|
while (limitsize < size) {
|
|
limitsize *= 2;
|
|
limit++;
|
|
}
|
|
return limit;
|
|
}
|