WSL2-Linux-Kernel/arch/powerpc/kvm/book3s_hv_interrupts.S

167 строки
4.0 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
*
* Copyright 2011 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
*
* Derived from book3s_interrupts.S, which is:
* Copyright SUSE Linux Products GmbH 2009
*
* Authors: Alexander Graf <agraf@suse.de>
*/
#include <asm/ppc_asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
#include <asm/exception-64s.h>
#include <asm/ppc-opcode.h>
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
/*****************************************************************************
* *
* Guest entry / exit code that is in kernel module memory (vmalloc) *
* *
****************************************************************************/
/* Registers:
* none
*/
_GLOBAL(__kvmppc_vcore_entry)
/* Write correct stack frame */
mflr r0
std r0,PPC_LR_STKOFF(r1)
/* Save host state to the stack */
stdu r1, -SWITCH_FRAME_SIZE(r1)
/* Save non-volatile registers (r14 - r31) and CR */
SAVE_NVGPRS(r1)
mfcr r3
std r3, _CCR(r1)
/* Save host DSCR */
mfspr r3, SPRN_DSCR
std r3, HSTATE_DSCR(r13)
BEGIN_FTR_SECTION
/* Save host DABR */
mfspr r3, SPRN_DABR
std r3, HSTATE_DABR(r13)
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
/* Save host PMU registers */
bl kvmhv_save_host_pmu
/*
* Put whatever is in the decrementer into the
* hypervisor decrementer.
* Because of a hardware deviation in P8 and P9,
* we need to set LPCR[HDICE] before writing HDEC.
*/
ld r5, HSTATE_KVM_VCORE(r13)
ld r6, VCORE_KVM(r5)
ld r9, KVM_HOST_LPCR(r6)
ori r8, r9, LPCR_HDICE
mtspr SPRN_LPCR, r8
isync
andis. r0, r9, LPCR_LD@h
mfspr r8,SPRN_DEC
mftb r7
BEGIN_FTR_SECTION
/* On POWER9, don't sign-extend if host LPCR[LD] bit is set */
bne 32f
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
extsw r8,r8
32: mtspr SPRN_HDEC,r8
add r8,r8,r7
std r8,HSTATE_DECEXP(r13)
/* Jump to partition switch code */
bl kvmppc_hv_entry_trampoline
nop
/*
* We return here in virtual mode after the guest exits
* with something that we can't handle in real mode.
* Interrupts are still hard-disabled.
*/
/*
* Register usage at this point:
*
* R1 = host R1
* R2 = host R2
* R3 = trap number on this thread
* R12 = exit handler id
* R13 = PACA
*/
/* Restore non-volatile host registers (r14 - r31) and CR */
REST_NVGPRS(r1)
ld r4, _CCR(r1)
mtcr r4
addi r1, r1, SWITCH_FRAME_SIZE
ld r0, PPC_LR_STKOFF(r1)
mtlr r0
blr
_GLOBAL(kvmhv_save_host_pmu)
BEGIN_FTR_SECTION
/* Work around P8 PMAE bug */
li r3, -1
clrrdi r3, r3, 10
mfspr r8, SPRN_MMCR2
mtspr SPRN_MMCR2, r3 /* freeze all counters using MMCR2 */
isync
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
li r3, 1
sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
mfspr r7, SPRN_MMCR0 /* save MMCR0 */
mtspr SPRN_MMCR0, r3 /* freeze all counters, disable interrupts */
mfspr r6, SPRN_MMCRA
/* Clear MMCRA in order to disable SDAR updates */
li r5, 0
mtspr SPRN_MMCRA, r5
isync
lbz r5, PACA_PMCINUSE(r13) /* is the host using the PMU? */
cmpwi r5, 0
beq 31f /* skip if not */
mfspr r5, SPRN_MMCR1
mfspr r9, SPRN_SIAR
mfspr r10, SPRN_SDAR
std r7, HSTATE_MMCR0(r13)
std r5, HSTATE_MMCR1(r13)
std r6, HSTATE_MMCRA(r13)
std r9, HSTATE_SIAR(r13)
std r10, HSTATE_SDAR(r13)
BEGIN_FTR_SECTION
mfspr r9, SPRN_SIER
std r8, HSTATE_MMCR2(r13)
std r9, HSTATE_SIER(r13)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
BEGIN_FTR_SECTION
mfspr r5, SPRN_MMCR3
mfspr r6, SPRN_SIER2
mfspr r7, SPRN_SIER3
std r5, HSTATE_MMCR3(r13)
std r6, HSTATE_SIER2(r13)
std r7, HSTATE_SIER3(r13)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_31)
mfspr r3, SPRN_PMC1
mfspr r5, SPRN_PMC2
mfspr r6, SPRN_PMC3
mfspr r7, SPRN_PMC4
mfspr r8, SPRN_PMC5
mfspr r9, SPRN_PMC6
stw r3, HSTATE_PMC1(r13)
stw r5, HSTATE_PMC2(r13)
stw r6, HSTATE_PMC3(r13)
stw r7, HSTATE_PMC4(r13)
stw r8, HSTATE_PMC5(r13)
stw r9, HSTATE_PMC6(r13)
31: blr