611 строки
15 KiB
Plaintext
611 строки
15 KiB
Plaintext
/*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2014 Broadcom Corporation. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Broadcom Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/clock/bcm-cygnus.h>
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "brcm,cygnus";
|
|
model = "Broadcom Cygnus SoC";
|
|
interrupt-parent = <&gic>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
next-level-cache = <&L2>;
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
/include/ "bcm-cygnus-clock.dtsi"
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
core {
|
|
compatible = "simple-bus";
|
|
ranges = <0x00000000 0x19000000 0x1000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
timer@20200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0x20200 0x100>;
|
|
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&periph_clk>;
|
|
};
|
|
|
|
gic: interrupt-controller@21000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0x21000 0x1000>,
|
|
<0x20100 0x100>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x22000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
axi {
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
otp: otp@301c800 {
|
|
compatible = "brcm,ocotp";
|
|
reg = <0x0301c800 0x2c>;
|
|
brcm,ocotp-size = <2048>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie_phy: phy@301d0a0 {
|
|
compatible = "brcm,cygnus-pcie-phy";
|
|
reg = <0x0301d0a0 0x14>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pcie0_phy: phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie1_phy: phy@1 {
|
|
reg = <1>;
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
|
|
pinctrl: pinctrl@301d0c8 {
|
|
compatible = "brcm,cygnus-pinmux";
|
|
reg = <0x0301d0c8 0x30>,
|
|
<0x0301d24c 0x2c>;
|
|
|
|
spi_0: spi_0 {
|
|
function = "spi0";
|
|
groups = "spi0_grp";
|
|
};
|
|
|
|
spi_1: spi_1 {
|
|
function = "spi1";
|
|
groups = "spi1_grp";
|
|
};
|
|
|
|
spi_2: spi_2 {
|
|
function = "spi2";
|
|
groups = "spi2_grp";
|
|
};
|
|
};
|
|
|
|
mailbox: mailbox@3024024 {
|
|
compatible = "brcm,iproc-mailbox";
|
|
reg = <0x03024024 0x40>;
|
|
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
gpio_crmu: gpio@3024800 {
|
|
compatible = "brcm,cygnus-crmu-gpio";
|
|
reg = <0x03024800 0x50>,
|
|
<0x03024008 0x18>;
|
|
ngpios = <6>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
interrupt-parent = <&mailbox>;
|
|
interrupts = <0>;
|
|
};
|
|
|
|
mdio: mdio@18002000 {
|
|
compatible = "brcm,iproc-mdio";
|
|
reg = <0x18002000 0x8>;
|
|
#size-cells = <1>;
|
|
#address-cells = <0>;
|
|
status = "disabled";
|
|
|
|
gphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
gphy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
switch: switch@18007000 {
|
|
compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
|
|
reg = <0x18007000 0x1000>;
|
|
status = "disabled";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
phy-handle = <&gphy0>;
|
|
phy-mode = "rgmii";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
phy-handle = <&gphy1>;
|
|
phy-mode = "rgmii";
|
|
};
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
label = "cpu";
|
|
ethernet = <ð0>;
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@18008000 {
|
|
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
|
|
reg = <0x18008000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt0: wdt@18009000 {
|
|
compatible = "arm,sp805" , "arm,primecell";
|
|
reg = <0x18009000 0x1000>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&axi81_clk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gpio_ccm: gpio@1800a000 {
|
|
compatible = "brcm,cygnus-ccm-gpio";
|
|
reg = <0x1800a000 0x50>,
|
|
<0x0301d164 0x20>;
|
|
ngpios = <24>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
i2c1: i2c@1800b000 {
|
|
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
|
|
reg = <0x1800b000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie0: pcie@18012000 {
|
|
compatible = "brcm,iproc-pcie";
|
|
reg = <0x18012000 0x1000>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
|
|
|
|
linux,pci-domain = <0>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x81000000 0 0 0x28000000 0 0x00010000
|
|
0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
|
|
|
|
phys = <&pcie0_phy>;
|
|
phy-names = "pcie-phy";
|
|
|
|
status = "disabled";
|
|
|
|
msi-parent = <&msi0>;
|
|
msi0: msi-controller {
|
|
compatible = "brcm,iproc-msi";
|
|
msi-controller;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 97 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 98 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 99 IRQ_TYPE_NONE>;
|
|
};
|
|
};
|
|
|
|
pcie1: pcie@18013000 {
|
|
compatible = "brcm,iproc-pcie";
|
|
reg = <0x18013000 0x1000>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
|
|
|
|
linux,pci-domain = <1>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x81000000 0 0 0x48000000 0 0x00010000
|
|
0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
|
|
|
|
phys = <&pcie1_phy>;
|
|
phy-names = "pcie-phy";
|
|
|
|
status = "disabled";
|
|
|
|
msi-parent = <&msi1>;
|
|
msi1: msi-controller {
|
|
compatible = "brcm,iproc-msi";
|
|
msi-controller;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 103 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 104 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 105 IRQ_TYPE_NONE>;
|
|
};
|
|
};
|
|
|
|
dma0: dma@18018000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x18018000 0x1000>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&apb_clk>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
uart0: serial@18020000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x18020000 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&axi81_clk>;
|
|
clock-frequency = <100000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@18021000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x18021000 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&axi81_clk>;
|
|
clock-frequency = <100000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@18022000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x18022000 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&axi81_clk>;
|
|
clock-frequency = <100000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@18023000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x18023000 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&axi81_clk>;
|
|
clock-frequency = <100000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@18028000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x18028000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-0 = <&spi_0>;
|
|
clocks = <&axi81_clk>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@18029000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x18029000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-0 = <&spi_1>;
|
|
clocks = <&axi81_clk>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@1802a000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x1802a000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-0 = <&spi_2>;
|
|
clocks = <&axi81_clk>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci0: sdhci@18041000 {
|
|
compatible = "brcm,sdhci-iproc-cygnus";
|
|
reg = <0x18041000 0x100>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
|
|
bus-width = <4>;
|
|
sdhci,auto-cmd12;
|
|
status = "disabled";
|
|
};
|
|
|
|
eth0: ethernet@18042000 {
|
|
compatible = "brcm,amac";
|
|
reg = <0x18042000 0x1000>,
|
|
<0x18110000 0x1000>;
|
|
reg-names = "amac_base", "idm_base";
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci1: sdhci@18043000 {
|
|
compatible = "brcm,sdhci-iproc-cygnus";
|
|
reg = <0x18043000 0x100>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
|
|
bus-width = <4>;
|
|
sdhci,auto-cmd12;
|
|
status = "disabled";
|
|
};
|
|
|
|
nand: nand@18046000 {
|
|
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
|
|
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
|
|
<0x18046f00 0x20>;
|
|
reg-names = "nand", "iproc-idm", "iproc-ext";
|
|
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
brcm,nand-has-wp;
|
|
};
|
|
|
|
ehci0: usb@18048000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x18048000 0x100>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@18048800 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x18048800 0x100>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
clcd: clcd@180a0000 {
|
|
compatible = "arm,pl111", "arm,primecell";
|
|
reg = <0x180a0000 0x1000>;
|
|
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "combined";
|
|
clocks = <&axi41_clk>, <&apb_clk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
v3d: v3d@180a2000 {
|
|
compatible = "brcm,cygnus-v3d";
|
|
reg = <0x180a2000 0x1000>;
|
|
clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
|
|
clock-names = "v3d_clk";
|
|
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vc4: gpu {
|
|
compatible = "brcm,cygnus-vc4";
|
|
};
|
|
|
|
gpio_asiu: gpio@180a5000 {
|
|
compatible = "brcm,cygnus-asiu-gpio";
|
|
reg = <0x180a5000 0x668>;
|
|
ngpios = <146>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-ranges = <&pinctrl 0 42 1>,
|
|
<&pinctrl 1 44 3>,
|
|
<&pinctrl 4 48 1>,
|
|
<&pinctrl 5 50 3>,
|
|
<&pinctrl 8 126 1>,
|
|
<&pinctrl 9 155 1>,
|
|
<&pinctrl 10 152 1>,
|
|
<&pinctrl 11 154 1>,
|
|
<&pinctrl 12 153 1>,
|
|
<&pinctrl 13 127 3>,
|
|
<&pinctrl 16 140 1>,
|
|
<&pinctrl 17 145 7>,
|
|
<&pinctrl 24 130 10>,
|
|
<&pinctrl 34 141 4>,
|
|
<&pinctrl 38 54 1>,
|
|
<&pinctrl 39 56 3>,
|
|
<&pinctrl 42 60 3>,
|
|
<&pinctrl 45 64 3>,
|
|
<&pinctrl 48 68 2>,
|
|
<&pinctrl 50 84 6>,
|
|
<&pinctrl 56 94 6>,
|
|
<&pinctrl 62 72 1>,
|
|
<&pinctrl 63 70 1>,
|
|
<&pinctrl 64 80 1>,
|
|
<&pinctrl 65 74 3>,
|
|
<&pinctrl 68 78 1>,
|
|
<&pinctrl 69 82 1>,
|
|
<&pinctrl 70 156 17>,
|
|
<&pinctrl 87 104 12>,
|
|
<&pinctrl 99 102 2>,
|
|
<&pinctrl 101 90 4>,
|
|
<&pinctrl 105 116 6>,
|
|
<&pinctrl 111 100 2>,
|
|
<&pinctrl 113 122 4>,
|
|
<&pinctrl 123 11 1>,
|
|
<&pinctrl 124 38 4>,
|
|
<&pinctrl 128 43 1>,
|
|
<&pinctrl 129 47 1>,
|
|
<&pinctrl 130 49 1>,
|
|
<&pinctrl 131 53 1>,
|
|
<&pinctrl 132 55 1>,
|
|
<&pinctrl 133 59 1>,
|
|
<&pinctrl 134 63 1>,
|
|
<&pinctrl 135 67 1>,
|
|
<&pinctrl 136 71 1>,
|
|
<&pinctrl 137 73 1>,
|
|
<&pinctrl 138 77 1>,
|
|
<&pinctrl 139 79 1>,
|
|
<&pinctrl 140 81 1>,
|
|
<&pinctrl 141 83 1>,
|
|
<&pinctrl 142 10 1>;
|
|
};
|
|
|
|
ts_adc_syscon: ts_adc_syscon@180a6000 {
|
|
compatible = "brcm,iproc-ts-adc-syscon", "syscon";
|
|
reg = <0x180a6000 0xc30>;
|
|
};
|
|
|
|
touchscreen: touchscreen@180a6000 {
|
|
compatible = "brcm,iproc-touchscreen";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ts_syscon = <&ts_adc_syscon>;
|
|
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
|
|
clock-names = "tsc_clk";
|
|
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
adc: adc@180a6000 {
|
|
compatible = "brcm,iproc-static-adc";
|
|
#io-channel-cells = <1>;
|
|
io-channel-ranges;
|
|
adc-syscon = <&ts_adc_syscon>;
|
|
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
|
|
clock-names = "tsc_clk";
|
|
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@180aa500 {
|
|
compatible = "brcm,kona-pwm";
|
|
reg = <0x180aa500 0xc4>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
keypad: keypad@180ac000 {
|
|
compatible = "brcm,bcm-keypad";
|
|
reg = <0x180ac000 0x14c>;
|
|
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
|
|
clock-names = "peri_clk";
|
|
clock-frequency = <31250>;
|
|
pull-up-enabled;
|
|
col-debounce-filter-period = <0>;
|
|
status-debounce-filter-period = <0>;
|
|
row-output-enabled;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|