WSL2-Linux-Kernel/drivers/pcmcia/sa1100_simpad.c

132 строки
2.9 KiB
C

/*
* drivers/pcmcia/sa1100_simpad.c
*
* PCMCIA implementation routines for simpad
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <mach/simpad.h>
#include "sa1100_generic.h"
static struct pcmcia_irqs irqs[] = {
{ 1, IRQ_GPIO_CF_CD, "CF_CD" },
};
static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
skt->socket.pci_irq = IRQ_GPIO_CF_IRQ;
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
static void simpad_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
/* Disable CF bus: */
/*simpad_set_cs3_bit(PCMCIA_BUFF_DIS);*/
simpad_clear_cs3_bit(PCMCIA_RESET);
}
static void
simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
unsigned long levels = GPLR;
long cs3reg = simpad_get_cs3_ro();
state->detect=((levels & GPIO_CF_CD)==0)?1:0;
state->ready=(levels & GPIO_CF_IRQ)?1:0;
state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
state->wrprot=0; /* Not available on Simpad. */
if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
(PCMCIA_VS1|PCMCIA_VS2)) {
state->vs_3v=0;
state->vs_Xv=0;
} else {
state->vs_3v=1;
state->vs_Xv=0;
}
}
static int
simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
unsigned long flags;
local_irq_save(flags);
/* Murphy: see table of MIC2562a-1 */
switch (state->Vcc) {
case 0:
simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
break;
case 33:
simpad_clear_cs3_bit(VCC_3V_EN|EN1);
simpad_set_cs3_bit(VCC_5V_EN|EN0);
break;
case 50:
simpad_clear_cs3_bit(VCC_5V_EN|EN1);
simpad_set_cs3_bit(VCC_3V_EN|EN0);
break;
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
__func__, state->Vcc);
simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
local_irq_restore(flags);
return -1;
}
local_irq_restore(flags);
return 0;
}
static void simpad_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
static void simpad_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
simpad_set_cs3_bit(PCMCIA_RESET);
}
static struct pcmcia_low_level simpad_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = simpad_pcmcia_hw_init,
.hw_shutdown = simpad_pcmcia_hw_shutdown,
.socket_state = simpad_pcmcia_socket_state,
.configure_socket = simpad_pcmcia_configure_socket,
.socket_init = simpad_pcmcia_socket_init,
.socket_suspend = simpad_pcmcia_socket_suspend,
};
int __devinit pcmcia_simpad_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_simpad())
ret = sa11xx_drv_pcmcia_probe(dev, &simpad_pcmcia_ops, 1, 1);
return ret;
}