327 строки
8.3 KiB
C
327 строки
8.3 KiB
C
/*
|
|
* FocalTech FT6236 TouchScreen driver.
|
|
*
|
|
* Copyright (c) 2010 Focal tech Ltd.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/property.h>
|
|
|
|
#define FT6236_MAX_TOUCH_POINTS 2
|
|
|
|
#define FT6236_REG_TH_GROUP 0x80
|
|
#define FT6236_REG_PERIODACTIVE 0x88
|
|
#define FT6236_REG_LIB_VER_H 0xa1
|
|
#define FT6236_REG_LIB_VER_L 0xa2
|
|
#define FT6236_REG_CIPHER 0xa3
|
|
#define FT6236_REG_FIRMID 0xa6
|
|
#define FT6236_REG_FOCALTECH_ID 0xa8
|
|
#define FT6236_REG_RELEASE_CODE_ID 0xaf
|
|
|
|
#define FT6236_EVENT_PRESS_DOWN 0
|
|
#define FT6236_EVENT_LIFT_UP 1
|
|
#define FT6236_EVENT_CONTACT 2
|
|
#define FT6236_EVENT_NO_EVENT 3
|
|
|
|
struct ft6236_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
struct gpio_desc *reset_gpio;
|
|
u32 max_x;
|
|
u32 max_y;
|
|
bool invert_x;
|
|
bool invert_y;
|
|
bool swap_xy;
|
|
};
|
|
|
|
/*
|
|
* This struct is a touchpoint as stored in hardware. Note that the id,
|
|
* as well as the event, are stored in the upper nybble of the hi byte.
|
|
*/
|
|
struct ft6236_touchpoint {
|
|
union {
|
|
u8 xhi;
|
|
u8 event;
|
|
};
|
|
u8 xlo;
|
|
union {
|
|
u8 yhi;
|
|
u8 id;
|
|
};
|
|
u8 ylo;
|
|
u8 weight;
|
|
u8 misc;
|
|
} __packed;
|
|
|
|
/* This packet represents the register map as read from offset 0 */
|
|
struct ft6236_packet {
|
|
u8 dev_mode;
|
|
u8 gest_id;
|
|
u8 touches;
|
|
struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS];
|
|
} __packed;
|
|
|
|
static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data)
|
|
{
|
|
int error;
|
|
|
|
error = i2c_smbus_read_i2c_block_data(client, reg, len, data);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
if (error != len)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t ft6236_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct ft6236_data *ft6236 = dev_id;
|
|
struct device *dev = &ft6236->client->dev;
|
|
struct input_dev *input = ft6236->input;
|
|
struct ft6236_packet buf;
|
|
u8 touches;
|
|
int i, error;
|
|
|
|
error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf);
|
|
if (error) {
|
|
dev_err(dev, "read touchdata failed %d\n", error);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
touches = buf.touches & 0xf;
|
|
if (touches > FT6236_MAX_TOUCH_POINTS) {
|
|
dev_dbg(dev,
|
|
"%d touch points reported, only %d are supported\n",
|
|
touches, FT6236_MAX_TOUCH_POINTS);
|
|
touches = FT6236_MAX_TOUCH_POINTS;
|
|
}
|
|
|
|
for (i = 0; i < touches; i++) {
|
|
struct ft6236_touchpoint *point = &buf.points[i];
|
|
u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo;
|
|
u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo;
|
|
u8 event = point->event >> 6;
|
|
u8 id = point->id >> 4;
|
|
bool act = (event == FT6236_EVENT_PRESS_DOWN ||
|
|
event == FT6236_EVENT_CONTACT);
|
|
|
|
input_mt_slot(input, id);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, act);
|
|
if (!act)
|
|
continue;
|
|
|
|
if (ft6236->invert_x)
|
|
x = ft6236->max_x - x;
|
|
|
|
if (ft6236->invert_y)
|
|
y = ft6236->max_y - y;
|
|
|
|
if (ft6236->swap_xy) {
|
|
input_report_abs(input, ABS_MT_POSITION_X, y);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, x);
|
|
} else {
|
|
input_report_abs(input, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, y);
|
|
}
|
|
}
|
|
|
|
input_mt_sync_frame(input);
|
|
input_sync(input);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg)
|
|
{
|
|
struct i2c_client *client = ft6236->client;
|
|
u8 val = 0;
|
|
int error;
|
|
|
|
error = ft6236_read(client, reg, 1, &val);
|
|
if (error)
|
|
dev_dbg(&client->dev,
|
|
"error reading register 0x%02x: %d\n", reg, error);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void ft6236_debug_info(struct ft6236_data *ft6236)
|
|
{
|
|
struct device *dev = &ft6236->client->dev;
|
|
|
|
dev_dbg(dev, "Touch threshold is %d\n",
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4);
|
|
dev_dbg(dev, "Report rate is %dHz\n",
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10);
|
|
dev_dbg(dev, "Firmware library version 0x%02x%02x\n",
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H),
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L));
|
|
dev_dbg(dev, "Firmware version 0x%02x\n",
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID));
|
|
dev_dbg(dev, "Chip vendor ID 0x%02x\n",
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER));
|
|
dev_dbg(dev, "CTPM vendor ID 0x%02x\n",
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID));
|
|
dev_dbg(dev, "Release code version 0x%02x\n",
|
|
ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID));
|
|
}
|
|
|
|
static void ft6236_reset(struct ft6236_data *ft6236)
|
|
{
|
|
if (!ft6236->reset_gpio)
|
|
return;
|
|
|
|
gpiod_set_value_cansleep(ft6236->reset_gpio, 1);
|
|
usleep_range(5000, 20000);
|
|
gpiod_set_value_cansleep(ft6236->reset_gpio, 0);
|
|
msleep(300);
|
|
}
|
|
|
|
static int ft6236_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct ft6236_data *ft6236;
|
|
struct input_dev *input;
|
|
u32 fuzz_x = 0, fuzz_y = 0;
|
|
u8 val;
|
|
int error;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
|
|
return -ENXIO;
|
|
|
|
if (!client->irq) {
|
|
dev_err(dev, "irq is missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL);
|
|
if (!ft6236)
|
|
return -ENOMEM;
|
|
|
|
ft6236->client = client;
|
|
ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(ft6236->reset_gpio)) {
|
|
error = PTR_ERR(ft6236->reset_gpio);
|
|
if (error != -EPROBE_DEFER)
|
|
dev_err(dev, "error getting reset gpio: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
ft6236_reset(ft6236);
|
|
|
|
/* verify that the controller is present */
|
|
error = ft6236_read(client, 0x00, 1, &val);
|
|
if (error) {
|
|
dev_err(dev, "failed to read from controller: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
ft6236_debug_info(ft6236);
|
|
|
|
input = devm_input_allocate_device(dev);
|
|
if (!input)
|
|
return -ENOMEM;
|
|
|
|
ft6236->input = input;
|
|
input->name = client->name;
|
|
input->id.bustype = BUS_I2C;
|
|
|
|
if (device_property_read_u32(dev, "touchscreen-size-x",
|
|
&ft6236->max_x) ||
|
|
device_property_read_u32(dev, "touchscreen-size-y",
|
|
&ft6236->max_y)) {
|
|
dev_err(dev, "touchscreen-size-x and/or -y missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x);
|
|
device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y);
|
|
ft6236->invert_x = device_property_read_bool(dev,
|
|
"touchscreen-inverted-x");
|
|
ft6236->invert_y = device_property_read_bool(dev,
|
|
"touchscreen-inverted-y");
|
|
ft6236->swap_xy = device_property_read_bool(dev,
|
|
"touchscreen-swapped-x-y");
|
|
|
|
if (ft6236->swap_xy) {
|
|
input_set_abs_params(input, ABS_MT_POSITION_X, 0,
|
|
ft6236->max_y, fuzz_y, 0);
|
|
input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
|
|
ft6236->max_x, fuzz_x, 0);
|
|
} else {
|
|
input_set_abs_params(input, ABS_MT_POSITION_X, 0,
|
|
ft6236->max_x, fuzz_x, 0);
|
|
input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
|
|
ft6236->max_y, fuzz_y, 0);
|
|
}
|
|
|
|
error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS,
|
|
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
|
|
if (error)
|
|
return error;
|
|
|
|
error = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
ft6236_interrupt, IRQF_ONESHOT,
|
|
client->name, ft6236);
|
|
if (error) {
|
|
dev_err(dev, "request irq %d failed: %d\n", client->irq, error);
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(input);
|
|
if (error) {
|
|
dev_err(dev, "failed to register input device: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id ft6236_of_match[] = {
|
|
{ .compatible = "focaltech,ft6236", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ft6236_of_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id ft6236_id[] = {
|
|
{ "ft6236", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ft6236_id);
|
|
|
|
static struct i2c_driver ft6236_driver = {
|
|
.driver = {
|
|
.name = "ft6236",
|
|
.of_match_table = of_match_ptr(ft6236_of_match),
|
|
},
|
|
.probe = ft6236_probe,
|
|
.id_table = ft6236_id,
|
|
};
|
|
module_i2c_driver(ft6236_driver);
|
|
|
|
MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
|
|
MODULE_AUTHOR("Noralf Trønnes <noralf@tronnes.org>");
|
|
MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver");
|
|
MODULE_LICENSE("GPL v2");
|