WSL2-Linux-Kernel/drivers/usb
Vikram Pandita abf710e655 usb: musb: handle nuked ep dma interrupt
User can trigger disabling of gadget at run time while the
transfers are going on.
Eg: 1: rmmod of musb driver while transfers are going on

Eg: 2: On android doing:
 echo 0       > /sys/class/android_usb/android0/enable
While a big file transfer is going on via PTP/MTP.

In such a case, musb_gadget_disable() calls nuke()
but the dma interrupt may still happen for an endpoint since hw
would raise the interrupt in anycase.

This can result in a NULL pointer access crash:

[  314.030426] PC is at txstate+0x74/0x20c
[  314.034759] LR is at musb_g_tx+0x140/0x204
[  314.039489] pc : [<c03506f4>]    lr : [<c0350bcc>]    psr: 20000193
[  314.039520] sp : c783bc68  ip : 00000002  fp : c783bc9c
[  314.052429] r10: 00000018  r9 : 00000000  r8 : 00000200
[  314.058258] r7 : 00000000  r6 : fc0ab130  r5 : c781a410  r4 : c6caf640
[  314.065643] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : c781a000
[  315.083251] Backtrace:
[  315.086242] [<c0350680>] (txstate+0x0/0x20c) from [<c0350bcc>] (musb_g_tx+0x140/0x204)
[  315.095123] [<c0350a8c>] (musb_g_tx+0x0/0x204) from [<c034eb00>] (musb_dma_completion+0x40/0x54)
[  315.104980] [<c034eac0>] (musb_dma_completion+0x0/0x54) from [<c0351e6c>] (dma_controller_irq+0x118/0x184)
[  315.115661] [<c0351d54>] (dma_controller_irq+0x0/0x184) from [<c00d86b8>] (handle_irq_event_percpu+0x54/0x188)

So put protection in code to handle possiblity of getting an interrupt for an
endpoint that might have been already nuked.

Reported-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:29:04 +03:00
..
atm USB: xusbatm.c: remove dbg() usage 2012-05-01 21:33:30 -07:00
c67x00 usb: convert drivers/usb/* to use module_platform_driver() 2011-11-28 06:48:32 +09:00
chipidea usb: chipidea: remove zero check of hw_ep_max 2012-05-15 08:43:40 -07:00
class USB: Disable hub-initiated LPM for comms devices. 2012-05-18 15:42:55 -07:00
core Driver core pull for 3.5-rc1 2012-05-22 16:02:13 -07:00
dwc3 usb: dwc3: Fix the dwc3 dependency 2012-05-11 15:17:31 -07:00
early USB: EHCI: Support controllers with big endian capability regs 2011-05-03 11:43:21 -07:00
gadget Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 2012-05-24 10:21:51 -07:00
host arm-soc: clock driver changes 2012-05-26 12:42:29 -07:00
image USB: mdc800.c: remove dbg() usage 2012-05-01 21:33:50 -07:00
misc USB: yurex.c: remove dbg() usage 2012-05-01 21:34:11 -07:00
mon usb: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed 2011-10-31 19:31:25 -04:00
musb usb: musb: handle nuked ep dma interrupt 2012-06-04 18:29:04 +03:00
otg USB: gpio_vbus: wakeup support on GPIO VBUS interrupts 2012-05-17 11:20:34 -07:00
phy USB: Add driver for NXP ISP1301 USB transceiver 2012-05-01 13:33:02 -04:00
renesas_usbhs usb: renesas_usbhs: gadget: add support for set_selfpowered 2012-05-04 15:53:05 +03:00
serial Revert "USB: serial: sierra: put reset_resume callback back." 2012-05-16 08:39:56 -07:00
storage Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2012-05-22 19:22:50 -07:00
wusbcore uwb & wusb: fix kconfig error 2012-01-26 11:22:42 -08:00
Kconfig usb: move ci13xxx and related code to drivers/usb/chipidea 2012-05-11 16:45:30 -07:00
Makefile usb: move ci13xxx and related code to drivers/usb/chipidea 2012-05-11 16:45:30 -07:00
README
usb-common.c usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
usb-skeleton.c USB: usb-skeleton.c: remove err() usage 2012-04-27 11:24:45 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.