1602 строки
53 KiB
C
1602 строки
53 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Cadence CDNSP DRD Driver.
|
|
*
|
|
* Copyright (C) 2020 Cadence.
|
|
*
|
|
* Author: Pawel Laszczak <pawell@cadence.com>
|
|
*
|
|
* Code based on Linux XHCI driver.
|
|
* Origin: Copyright (C) 2008 Intel Corp.
|
|
*/
|
|
#ifndef __LINUX_CDNSP_GADGET_H
|
|
#define __LINUX_CDNSP_GADGET_H
|
|
|
|
#include <linux/io-64-nonatomic-lo-hi.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/irq.h>
|
|
|
|
/* Max number slots - only 1 is allowed. */
|
|
#define CDNSP_DEV_MAX_SLOTS 1
|
|
|
|
#define CDNSP_EP0_SETUP_SIZE 512
|
|
|
|
/* One control and 15 for in and 15 for out endpoints. */
|
|
#define CDNSP_ENDPOINTS_NUM 31
|
|
|
|
/* Best Effort Service Latency. */
|
|
#define CDNSP_DEFAULT_BESL 0
|
|
|
|
/* Device Controller command default timeout value in us */
|
|
#define CDNSP_CMD_TIMEOUT (15 * 1000)
|
|
|
|
/* Up to 16 ms to halt an device controller */
|
|
#define CDNSP_MAX_HALT_USEC (16 * 1000)
|
|
|
|
#define CDNSP_CTX_SIZE 2112
|
|
|
|
/*
|
|
* Controller register interface.
|
|
*/
|
|
|
|
/**
|
|
* struct cdnsp_cap_regs - CDNSP Registers.
|
|
* @hc_capbase: Length of the capabilities register and controller
|
|
* version number
|
|
* @hcs_params1: HCSPARAMS1 - Structural Parameters 1
|
|
* @hcs_params2: HCSPARAMS2 - Structural Parameters 2
|
|
* @hcs_params3: HCSPARAMS3 - Structural Parameters 3
|
|
* @hcc_params: HCCPARAMS - Capability Parameters
|
|
* @db_off: DBOFF - Doorbell array offset
|
|
* @run_regs_off: RTSOFF - Runtime register space offset
|
|
* @hcc_params2: HCCPARAMS2 Capability Parameters 2,
|
|
*/
|
|
struct cdnsp_cap_regs {
|
|
__le32 hc_capbase;
|
|
__le32 hcs_params1;
|
|
__le32 hcs_params2;
|
|
__le32 hcs_params3;
|
|
__le32 hcc_params;
|
|
__le32 db_off;
|
|
__le32 run_regs_off;
|
|
__le32 hcc_params2;
|
|
/* Reserved up to (CAPLENGTH - 0x1C) */
|
|
};
|
|
|
|
/* hc_capbase bitmasks. */
|
|
/* bits 7:0 - how long is the Capabilities register. */
|
|
#define HC_LENGTH(p) (((p) >> 00) & GENMASK(7, 0))
|
|
/* bits 31:16 */
|
|
#define HC_VERSION(p) (((p) >> 16) & GENMASK(15, 1))
|
|
|
|
/* HCSPARAMS1 - hcs_params1 - bitmasks */
|
|
/* bits 0:7, Max Device Endpoints */
|
|
#define HCS_ENDPOINTS_MASK GENMASK(7, 0)
|
|
#define HCS_ENDPOINTS(p) (((p) & HCS_ENDPOINTS_MASK) >> 0)
|
|
|
|
/* HCCPARAMS offset from PCI base address */
|
|
#define HCC_PARAMS_OFFSET 0x10
|
|
|
|
/* HCCPARAMS - hcc_params - bitmasks */
|
|
/* 1: device controller can use 64-bit address pointers. */
|
|
#define HCC_64BIT_ADDR(p) ((p) & BIT(0))
|
|
/* 1: device controller uses 64-byte Device Context structures. */
|
|
#define HCC_64BYTE_CONTEXT(p) ((p) & BIT(2))
|
|
/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */
|
|
#define HCC_MAX_PSA(p) ((((p) >> 12) & 0xf) + 1)
|
|
/* Extended Capabilities pointer from PCI base. */
|
|
#define HCC_EXT_CAPS(p) (((p) & GENMASK(31, 16)) >> 16)
|
|
|
|
#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
|
|
|
|
/* db_off bitmask - bits 0:1 reserved. */
|
|
#define DBOFF_MASK GENMASK(31, 2)
|
|
|
|
/* run_regs_off bitmask - bits 0:4 reserved. */
|
|
#define RTSOFF_MASK GENMASK(31, 5)
|
|
|
|
/**
|
|
* struct cdnsp_op_regs - Device Controller Operational Registers.
|
|
* @command: USBCMD - Controller command register.
|
|
* @status: USBSTS - Controller status register.
|
|
* @page_size: This indicates the page size that the device controller supports.
|
|
* If bit n is set, the controller supports a page size of 2^(n+12),
|
|
* up to a 128MB page size. 4K is the minimum page size.
|
|
* @dnctrl: DNCTRL - Device notification control register.
|
|
* @cmd_ring: CRP - 64-bit Command Ring Pointer.
|
|
* @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer.
|
|
* @config_reg: CONFIG - Configure Register
|
|
* @port_reg_base: PORTSCn - base address for Port Status and Control
|
|
* Each port has a Port Status and Control register,
|
|
* followed by a Port Power Management Status and Control
|
|
* register, a Port Link Info register, and a reserved
|
|
* register.
|
|
*/
|
|
struct cdnsp_op_regs {
|
|
__le32 command;
|
|
__le32 status;
|
|
__le32 page_size;
|
|
__le32 reserved1;
|
|
__le32 reserved2;
|
|
__le32 dnctrl;
|
|
__le64 cmd_ring;
|
|
/* rsvd: offset 0x20-2F. */
|
|
__le32 reserved3[4];
|
|
__le64 dcbaa_ptr;
|
|
__le32 config_reg;
|
|
/* rsvd: offset 0x3C-3FF. */
|
|
__le32 reserved4[241];
|
|
/* port 1 registers, which serve as a base address for other ports. */
|
|
__le32 port_reg_base;
|
|
};
|
|
|
|
/* Number of registers per port. */
|
|
#define NUM_PORT_REGS 4
|
|
|
|
/**
|
|
* struct cdnsp_port_regs - Port Registers.
|
|
* @portsc: PORTSC - Port Status and Control Register.
|
|
* @portpmsc: PORTPMSC - Port Power Managements Status and Control Register.
|
|
* @portli: PORTLI - Port Link Info register.
|
|
*/
|
|
struct cdnsp_port_regs {
|
|
__le32 portsc;
|
|
__le32 portpmsc;
|
|
__le32 portli;
|
|
__le32 reserved;
|
|
};
|
|
|
|
/*
|
|
* These bits are Read Only (RO) and should be saved and written to the
|
|
* registers: 0 (connect status) and 10:13 (port speed).
|
|
* These bits are also sticky - meaning they're in the AUX well and they aren't
|
|
* changed by a hot and warm.
|
|
*/
|
|
#define CDNSP_PORT_RO (PORT_CONNECT | DEV_SPEED_MASK)
|
|
|
|
/*
|
|
* These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
|
|
* bits 5:8 (link state), 25:26 ("wake on" enable state)
|
|
*/
|
|
#define CDNSP_PORT_RWS (PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E)
|
|
|
|
/*
|
|
* These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
|
|
* bits 1 (port enable/disable), 17 ( connect changed),
|
|
* 21 (port reset changed) , 22 (Port Link State Change),
|
|
*/
|
|
#define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC)
|
|
|
|
/* USBCMD - USB command - bitmasks. */
|
|
/* Run/Stop, controller execution - do not write unless controller is halted.*/
|
|
#define CMD_R_S BIT(0)
|
|
/*
|
|
* Reset device controller - resets internal controller state machine and all
|
|
* registers (except PCI config regs).
|
|
*/
|
|
#define CMD_RESET BIT(1)
|
|
/* Event Interrupt Enable - a '1' allows interrupts from the controller. */
|
|
#define CMD_INTE BIT(2)
|
|
/*
|
|
* Device System Error Interrupt Enable - get out-of-band signal for
|
|
* controller errors.
|
|
*/
|
|
#define CMD_DSEIE BIT(3)
|
|
/* device controller save/restore state. */
|
|
#define CMD_CSS BIT(8)
|
|
#define CMD_CRS BIT(9)
|
|
/*
|
|
* Enable Wrap Event - '1' means device controller generates an event
|
|
* when MFINDEX wraps.
|
|
*/
|
|
#define CMD_EWE BIT(10)
|
|
/* 1: device enabled */
|
|
#define CMD_DEVEN BIT(17)
|
|
/* bits 18:31 are reserved (and should be preserved on writes). */
|
|
|
|
/* Command register values to disable interrupts. */
|
|
#define CDNSP_IRQS (CMD_INTE | CMD_DSEIE | CMD_EWE)
|
|
|
|
/* USBSTS - USB status - bitmasks */
|
|
/* controller not running - set to 1 when run/stop bit is cleared. */
|
|
#define STS_HALT BIT(0)
|
|
/*
|
|
* serious error, e.g. PCI parity error. The controller will clear
|
|
* the run/stop bit.
|
|
*/
|
|
#define STS_FATAL BIT(2)
|
|
/* event interrupt - clear this prior to clearing any IP flags in IR set.*/
|
|
#define STS_EINT BIT(3)
|
|
/* port change detect */
|
|
#define STS_PCD BIT(4)
|
|
/* save state status - '1' means device controller is saving state. */
|
|
#define STS_SSS BIT(8)
|
|
/* restore state status - '1' means controllers is restoring state. */
|
|
#define STS_RSS BIT(9)
|
|
/* 1: save or restore error */
|
|
#define STS_SRE BIT(10)
|
|
/* 1: device Not Ready to accept doorbell or op reg writes after reset. */
|
|
#define STS_CNR BIT(11)
|
|
/* 1: internal Device Controller Error.*/
|
|
#define STS_HCE BIT(12)
|
|
|
|
/* CRCR - Command Ring Control Register - cmd_ring bitmasks. */
|
|
/* bit 0 is the command ring cycle state. */
|
|
#define CMD_RING_CS BIT(0)
|
|
/* stop ring immediately - abort the currently executing command. */
|
|
#define CMD_RING_ABORT BIT(2)
|
|
/*
|
|
* Command Ring Busy.
|
|
* Set when Doorbell register is written with DB for command and cleared when
|
|
* the controller reached end of CR.
|
|
*/
|
|
#define CMD_RING_BUSY(p) ((p) & BIT(4))
|
|
/* 1: command ring is running */
|
|
#define CMD_RING_RUNNING BIT(3)
|
|
/* Command Ring pointer - bit mask for the lower 32 bits. */
|
|
#define CMD_RING_RSVD_BITS GENMASK(5, 0)
|
|
|
|
/* CONFIG - Configure Register - config_reg bitmasks. */
|
|
/* bits 0:7 - maximum number of device slots enabled. */
|
|
#define MAX_DEVS GENMASK(7, 0)
|
|
/* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */
|
|
#define CONFIG_U3E BIT(8)
|
|
|
|
/* PORTSC - Port Status and Control Register - port_reg_base bitmasks */
|
|
/* 1: device connected. */
|
|
#define PORT_CONNECT BIT(0)
|
|
/* 1: port enabled. */
|
|
#define PORT_PED BIT(1)
|
|
/* 1: port reset signaling asserted. */
|
|
#define PORT_RESET BIT(4)
|
|
/*
|
|
* Port Link State - bits 5:8
|
|
* A read gives the current link PM state of the port,
|
|
* a write with Link State Write Strobe sets the link state.
|
|
*/
|
|
#define PORT_PLS_MASK GENMASK(8, 5)
|
|
#define XDEV_U0 (0x0 << 5)
|
|
#define XDEV_U1 (0x1 << 5)
|
|
#define XDEV_U2 (0x2 << 5)
|
|
#define XDEV_U3 (0x3 << 5)
|
|
#define XDEV_DISABLED (0x4 << 5)
|
|
#define XDEV_RXDETECT (0x5 << 5)
|
|
#define XDEV_INACTIVE (0x6 << 5)
|
|
#define XDEV_POLLING (0x7 << 5)
|
|
#define XDEV_RECOVERY (0x8 << 5)
|
|
#define XDEV_HOT_RESET (0x9 << 5)
|
|
#define XDEV_COMP_MODE (0xa << 5)
|
|
#define XDEV_TEST_MODE (0xb << 5)
|
|
#define XDEV_RESUME (0xf << 5)
|
|
/* 1: port has power. */
|
|
#define PORT_POWER BIT(9)
|
|
/*
|
|
* bits 10:13 indicate device speed:
|
|
* 0 - undefined speed - port hasn't be initialized by a reset yet
|
|
* 1 - full speed
|
|
* 2 - Reserved (Low Speed not supported
|
|
* 3 - high speed
|
|
* 4 - super speed
|
|
* 5 - super speed
|
|
* 6-15 reserved
|
|
*/
|
|
#define DEV_SPEED_MASK GENMASK(13, 10)
|
|
#define XDEV_FS (0x1 << 10)
|
|
#define XDEV_HS (0x3 << 10)
|
|
#define XDEV_SS (0x4 << 10)
|
|
#define XDEV_SSP (0x5 << 10)
|
|
#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0 << 10))
|
|
#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
|
|
#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
|
|
#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
|
|
#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP)
|
|
#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS)
|
|
#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f)
|
|
/* Port Link State Write Strobe - set this when changing link state */
|
|
#define PORT_LINK_STROBE BIT(16)
|
|
/* 1: connect status change */
|
|
#define PORT_CSC BIT(17)
|
|
/* 1: warm reset for a USB 3.0 device is done. */
|
|
#define PORT_WRC BIT(19)
|
|
/* 1: reset change - 1 to 0 transition of PORT_RESET */
|
|
#define PORT_RC BIT(21)
|
|
/*
|
|
* port link status change - set on some port link state transitions:
|
|
* Transition Reason
|
|
* ----------------------------------------------------------------------------
|
|
* - U3 to Resume Wakeup signaling from a device
|
|
* - Resume to Recovery to U0 USB 3.0 device resume
|
|
* - Resume to U0 USB 2.0 device resume
|
|
* - U3 to Recovery to U0 Software resume of USB 3.0 device complete
|
|
* - U3 to U0 Software resume of USB 2.0 device complete
|
|
* - U2 to U0 L1 resume of USB 2.1 device complete
|
|
* - U0 to U0 L1 entry rejection by USB 2.1 device
|
|
* - U0 to disabled L1 entry error with USB 2.1 device
|
|
* - Any state to inactive Error on USB 3.0 port
|
|
*/
|
|
#define PORT_PLC BIT(22)
|
|
/* Port configure error change - port failed to configure its link partner. */
|
|
#define PORT_CEC BIT(23)
|
|
/* Wake on connect (enable). */
|
|
#define PORT_WKCONN_E BIT(25)
|
|
/* Wake on disconnect (enable). */
|
|
#define PORT_WKDISC_E BIT(26)
|
|
/* Indicates if Warm Reset is being received. */
|
|
#define PORT_WR BIT(31)
|
|
|
|
#define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC)
|
|
|
|
/* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */
|
|
/* Enables U1 entry. */
|
|
#define PORT_U1_TIMEOUT_MASK GENMASK(7, 0)
|
|
#define PORT_U1_TIMEOUT(p) ((p) & PORT_U1_TIMEOUT_MASK)
|
|
/* Enables U2 entry .*/
|
|
#define PORT_U2_TIMEOUT_MASK GENMASK(14, 8)
|
|
#define PORT_U2_TIMEOUT(p) (((p) << 8) & PORT_U2_TIMEOUT_MASK)
|
|
|
|
/* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */
|
|
#define PORT_L1S_MASK GENMASK(2, 0)
|
|
#define PORT_L1S(p) ((p) & PORT_L1S_MASK)
|
|
#define PORT_L1S_ACK PORT_L1S(1)
|
|
#define PORT_L1S_NYET PORT_L1S(2)
|
|
#define PORT_L1S_STALL PORT_L1S(3)
|
|
#define PORT_L1S_TIMEOUT PORT_L1S(4)
|
|
/* Remote Wake Enable. */
|
|
#define PORT_RWE BIT(3)
|
|
/* Best Effort Service Latency (BESL). */
|
|
#define PORT_BESL(p) (((p) << 4) & GENMASK(7, 4))
|
|
/* Hardware LPM Enable (HLE). */
|
|
#define PORT_HLE BIT(16)
|
|
/* Received Best Effort Service Latency (BESL). */
|
|
#define PORT_RRBESL(p) (((p) & GENMASK(20, 17)) >> 17)
|
|
/* Port Test Control. */
|
|
#define PORT_TEST_MODE_MASK GENMASK(31, 28)
|
|
#define PORT_TEST_MODE(p) (((p) << 28) & PORT_TEST_MODE_MASK)
|
|
|
|
/**
|
|
* struct cdnsp_intr_reg - Interrupt Register Set.
|
|
* @irq_pending: IMAN - Interrupt Management Register. Used to enable
|
|
* interrupts and check for pending interrupts.
|
|
* @irq_control: IMOD - Interrupt Moderation Register.
|
|
* Used to throttle interrupts.
|
|
* @erst_size: Number of segments in the Event Ring Segment Table (ERST).
|
|
* @erst_base: ERST base address.
|
|
* @erst_dequeue: Event ring dequeue pointer.
|
|
*
|
|
* Each interrupter (defined by a MSI-X vector) has an event ring and an Event
|
|
* Ring Segment Table (ERST) associated with it. The event ring is comprised of
|
|
* multiple segments of the same size. The controller places events on the ring
|
|
* and "updates the Cycle bit in the TRBs to indicate to software the current
|
|
* position of the Enqueue Pointer." The driver processes those events and
|
|
* updates the dequeue pointer.
|
|
*/
|
|
struct cdnsp_intr_reg {
|
|
__le32 irq_pending;
|
|
__le32 irq_control;
|
|
__le32 erst_size;
|
|
__le32 rsvd;
|
|
__le64 erst_base;
|
|
__le64 erst_dequeue;
|
|
};
|
|
|
|
/* IMAN - Interrupt Management Register - irq_pending bitmasks l. */
|
|
#define IMAN_IE BIT(1)
|
|
#define IMAN_IP BIT(0)
|
|
/* bits 2:31 need to be preserved */
|
|
#define IMAN_IE_SET(p) (((p) & IMAN_IE) | 0x2)
|
|
#define IMAN_IE_CLEAR(p) (((p) & IMAN_IE) & ~(0x2))
|
|
|
|
/* IMOD - Interrupter Moderation Register - irq_control bitmasks. */
|
|
/*
|
|
* Minimum interval between interrupts (in 250ns intervals). The interval
|
|
* between interrupts will be longer if there are no events on the event ring.
|
|
* Default is 4000 (1 ms).
|
|
*/
|
|
#define IMOD_INTERVAL_MASK GENMASK(15, 0)
|
|
/* Counter used to count down the time to the next interrupt - HW use only */
|
|
#define IMOD_COUNTER_MASK GENMASK(31, 16)
|
|
#define IMOD_DEFAULT_INTERVAL 0
|
|
|
|
/* erst_size bitmasks. */
|
|
/* Preserve bits 16:31 of erst_size. */
|
|
#define ERST_SIZE_MASK GENMASK(31, 16)
|
|
|
|
/* erst_dequeue bitmasks. */
|
|
/*
|
|
* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
|
|
* where the current dequeue pointer lies. This is an optional HW hint.
|
|
*/
|
|
#define ERST_DESI_MASK GENMASK(2, 0)
|
|
/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */
|
|
#define ERST_EHB BIT(3)
|
|
#define ERST_PTR_MASK GENMASK(3, 0)
|
|
|
|
/**
|
|
* struct cdnsp_run_regs
|
|
* @microframe_index: MFINDEX - current microframe number.
|
|
* @ir_set: Array of Interrupter registers.
|
|
*
|
|
* Device Controller Runtime Registers:
|
|
* "Software should read and write these registers using only Dword (32 bit)
|
|
* or larger accesses"
|
|
*/
|
|
struct cdnsp_run_regs {
|
|
__le32 microframe_index;
|
|
__le32 rsvd[7];
|
|
struct cdnsp_intr_reg ir_set[128];
|
|
};
|
|
|
|
/**
|
|
* USB2.0 Port Peripheral Configuration Registers.
|
|
* @ext_cap: Header register for Extended Capability.
|
|
* @port_reg1: Timer Configuration Register.
|
|
* @port_reg2: Timer Configuration Register.
|
|
* @port_reg3: Timer Configuration Register.
|
|
* @port_reg4: Timer Configuration Register.
|
|
* @port_reg5: Timer Configuration Register.
|
|
* @port_reg6: Chicken bits for USB20PPP.
|
|
*/
|
|
struct cdnsp_20port_cap {
|
|
__le32 ext_cap;
|
|
__le32 port_reg1;
|
|
__le32 port_reg2;
|
|
__le32 port_reg3;
|
|
__le32 port_reg4;
|
|
__le32 port_reg5;
|
|
__le32 port_reg6;
|
|
};
|
|
|
|
/* Extended capability register fields */
|
|
#define EXT_CAPS_ID(p) (((p) >> 0) & GENMASK(7, 0))
|
|
#define EXT_CAPS_NEXT(p) (((p) >> 8) & GENMASK(7, 0))
|
|
/* Extended capability IDs - ID 0 reserved */
|
|
#define EXT_CAPS_PROTOCOL 2
|
|
|
|
/* USB 2.0 Port Peripheral Configuration Extended Capability */
|
|
#define EXT_CAP_CFG_DEV_20PORT_CAP_ID 0xC1
|
|
/*
|
|
* Setting this bit to '1' enables automatic wakeup from L1 state on transfer
|
|
* TRB prepared when USBSSP operates in USB2.0 mode.
|
|
*/
|
|
#define PORT_REG6_L1_L0_HW_EN BIT(1)
|
|
/*
|
|
* Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0
|
|
* mode (disables High Speed).
|
|
*/
|
|
#define PORT_REG6_FORCE_FS BIT(0)
|
|
|
|
/**
|
|
* USB3.x Port Peripheral Configuration Registers.
|
|
* @ext_cap: Header register for Extended Capability.
|
|
* @mode_addr: Miscellaneous 3xPORT operation mode configuration register.
|
|
* @mode_2: 3x Port Control Register 2.
|
|
*/
|
|
struct cdnsp_3xport_cap {
|
|
__le32 ext_cap;
|
|
__le32 mode_addr;
|
|
__le32 reserved[52];
|
|
__le32 mode_2;
|
|
};
|
|
|
|
/* Extended Capability Header for 3XPort Configuration Registers. */
|
|
#define D_XEC_CFG_3XPORT_CAP 0xC0
|
|
#define CFG_3XPORT_SSP_SUPPORT BIT(31)
|
|
#define CFG_3XPORT_U1_PIPE_CLK_GATE_EN BIT(0)
|
|
|
|
/* Revision Extended Capability ID */
|
|
#define RTL_REV_CAP 0xC4
|
|
#define RTL_REV_CAP_RX_BUFF_CMD_SIZE BITMASK(31, 24)
|
|
#define RTL_REV_CAP_RX_BUFF_SIZE BITMASK(15, 0)
|
|
#define RTL_REV_CAP_TX_BUFF_CMD_SIZE BITMASK(31, 24)
|
|
#define RTL_REV_CAP_TX_BUFF_SIZE BITMASK(15, 0)
|
|
|
|
#define CDNSP_VER_1 0x00000000
|
|
#define CDNSP_VER_2 0x10000000
|
|
|
|
#define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) \
|
|
(readl(&(pdev)->rev_cap->ep_supported) & \
|
|
(BIT(ep_num) << ((dir) ? 0 : 16)))
|
|
|
|
/**
|
|
* struct cdnsp_rev_cap - controller capabilities.
|
|
* @ext_cap: Header for RTL Revision Extended Capability.
|
|
* @rtl_revision: RTL revision.
|
|
* @rx_buff_size: Rx buffer sizes.
|
|
* @tx_buff_size: Tx buffer sizes.
|
|
* @ep_supported: Supported endpoints.
|
|
* @ctrl_revision: Controller revision ID.
|
|
*/
|
|
struct cdnsp_rev_cap {
|
|
__le32 ext_cap;
|
|
__le32 rtl_revision;
|
|
__le32 rx_buff_size;
|
|
__le32 tx_buff_size;
|
|
__le32 ep_supported;
|
|
__le32 ctrl_revision;
|
|
};
|
|
|
|
/* USB2.0 Port Peripheral Configuration Registers. */
|
|
#define D_XEC_PRE_REGS_CAP 0xC8
|
|
#define REG_CHICKEN_BITS_2_OFFSET 0x48
|
|
#define CHICKEN_XDMA_2_TP_CACHE_DIS BIT(28)
|
|
|
|
/* XBUF Extended Capability ID. */
|
|
#define XBUF_CAP_ID 0xCB
|
|
#define XBUF_RX_TAG_MASK_0_OFFSET 0x1C
|
|
#define XBUF_RX_TAG_MASK_1_OFFSET 0x24
|
|
#define XBUF_TX_CMD_OFFSET 0x2C
|
|
|
|
/**
|
|
* struct cdnsp_doorbell_array.
|
|
* @cmd_db: Command ring doorbell register.
|
|
* @ep_db: Endpoint ring doorbell register.
|
|
* Bits 0 - 7: Endpoint target.
|
|
* Bits 8 - 15: RsvdZ.
|
|
* Bits 16 - 31: Stream ID.
|
|
*/
|
|
struct cdnsp_doorbell_array {
|
|
__le32 cmd_db;
|
|
__le32 ep_db;
|
|
};
|
|
|
|
#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
|
|
#define DB_VALUE_EP0_OUT(ep, stream) ((ep) & 0xff)
|
|
#define DB_VALUE_CMD 0x00000000
|
|
|
|
/**
|
|
* struct cdnsp_container_ctx.
|
|
* @type: Type of context. Used to calculated offsets to contained contexts.
|
|
* @size: Size of the context data.
|
|
* @ctx_size: context data structure size - 64 or 32 bits.
|
|
* @dma: dma address of the bytes.
|
|
* @bytes: The raw context data given to HW.
|
|
*
|
|
* Represents either a Device or Input context. Holds a pointer to the raw
|
|
* memory used for the context (bytes) and dma address of it (dma).
|
|
*/
|
|
struct cdnsp_container_ctx {
|
|
unsigned int type;
|
|
#define CDNSP_CTX_TYPE_DEVICE 0x1
|
|
#define CDNSP_CTX_TYPE_INPUT 0x2
|
|
int size;
|
|
int ctx_size;
|
|
dma_addr_t dma;
|
|
u8 *bytes;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_slot_ctx
|
|
* @dev_info: Device speed, and last valid endpoint.
|
|
* @dev_port: Device port number that is needed to access the USB device.
|
|
* @int_target: Interrupter target number.
|
|
* @dev_state: Slot state and device address.
|
|
*
|
|
* Slot Context - This assumes the controller uses 32-byte context
|
|
* structures. If the controller uses 64-byte contexts, there is an additional
|
|
* 32 bytes reserved at the end of the slot context for controller internal use.
|
|
*/
|
|
struct cdnsp_slot_ctx {
|
|
__le32 dev_info;
|
|
__le32 dev_port;
|
|
__le32 int_target;
|
|
__le32 dev_state;
|
|
/* offset 0x10 to 0x1f reserved for controller internal use. */
|
|
__le32 reserved[4];
|
|
};
|
|
|
|
/* Bits 20:23 in the Slot Context are the speed for the device. */
|
|
#define SLOT_SPEED_FS (XDEV_FS << 10)
|
|
#define SLOT_SPEED_HS (XDEV_HS << 10)
|
|
#define SLOT_SPEED_SS (XDEV_SS << 10)
|
|
#define SLOT_SPEED_SSP (XDEV_SSP << 10)
|
|
|
|
/* dev_info bitmasks. */
|
|
/* Device speed - values defined by PORTSC Device Speed field - 20:23. */
|
|
#define DEV_SPEED GENMASK(23, 20)
|
|
#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20)
|
|
/* Index of the last valid endpoint context in this device context - 27:31. */
|
|
#define LAST_CTX_MASK ((unsigned int)GENMASK(31, 27))
|
|
#define LAST_CTX(p) ((p) << 27)
|
|
#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
|
|
#define SLOT_FLAG BIT(0)
|
|
#define EP0_FLAG BIT(1)
|
|
|
|
/* dev_port bitmasks */
|
|
/* Device port number that is needed to access the USB device. */
|
|
#define DEV_PORT(p) (((p) & 0xff) << 16)
|
|
|
|
/* dev_state bitmasks */
|
|
/* USB device address - assigned by the controller. */
|
|
#define DEV_ADDR_MASK GENMASK(7, 0)
|
|
/* Slot state */
|
|
#define SLOT_STATE GENMASK(31, 27)
|
|
#define GET_SLOT_STATE(p) (((p) & SLOT_STATE) >> 27)
|
|
|
|
#define SLOT_STATE_DISABLED 0
|
|
#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
|
|
#define SLOT_STATE_DEFAULT 1
|
|
#define SLOT_STATE_ADDRESSED 2
|
|
#define SLOT_STATE_CONFIGURED 3
|
|
|
|
/**
|
|
* struct cdnsp_ep_ctx.
|
|
* @ep_info: Endpoint state, streams, mult, and interval information.
|
|
* @ep_info2: Information on endpoint type, max packet size, max burst size,
|
|
* error count, and whether the controller will force an event for
|
|
* all transactions.
|
|
* @deq: 64-bit ring dequeue pointer address. If the endpoint only
|
|
* defines one stream, this points to the endpoint transfer ring.
|
|
* Otherwise, it points to a stream context array, which has a
|
|
* ring pointer for each flow.
|
|
* @tx_info: Average TRB lengths for the endpoint ring and
|
|
* max payload within an Endpoint Service Interval Time (ESIT).
|
|
*
|
|
* Endpoint Context - This assumes the controller uses 32-byte context
|
|
* structures. If the controller uses 64-byte contexts, there is an additional
|
|
* 32 bytes reserved at the end of the endpoint context for controller internal
|
|
* use.
|
|
*/
|
|
struct cdnsp_ep_ctx {
|
|
__le32 ep_info;
|
|
__le32 ep_info2;
|
|
__le64 deq;
|
|
__le32 tx_info;
|
|
/* offset 0x14 - 0x1f reserved for controller internal use. */
|
|
__le32 reserved[3];
|
|
};
|
|
|
|
/* ep_info bitmasks. */
|
|
/*
|
|
* Endpoint State - bits 0:2:
|
|
* 0 - disabled
|
|
* 1 - running
|
|
* 2 - halted due to halt condition
|
|
* 3 - stopped
|
|
* 4 - TRB error
|
|
* 5-7 - reserved
|
|
*/
|
|
#define EP_STATE_MASK GENMASK(3, 0)
|
|
#define EP_STATE_DISABLED 0
|
|
#define EP_STATE_RUNNING 1
|
|
#define EP_STATE_HALTED 2
|
|
#define EP_STATE_STOPPED 3
|
|
#define EP_STATE_ERROR 4
|
|
#define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
|
|
|
|
/* Mult - Max number of burst within an interval, in EP companion desc. */
|
|
#define EP_MULT(p) (((p) << 8) & GENMASK(9, 8))
|
|
#define CTX_TO_EP_MULT(p) (((p) & GENMASK(9, 8)) >> 8)
|
|
/* bits 10:14 are Max Primary Streams. */
|
|
/* bit 15 is Linear Stream Array. */
|
|
/* Interval - period between requests to an endpoint - 125u increments. */
|
|
#define EP_INTERVAL(p) (((p) << 16) & GENMASK(23, 16))
|
|
#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) & GENMASK(23, 16)) >> 16))
|
|
#define CTX_TO_EP_INTERVAL(p) (((p) & GENMASK(23, 16)) >> 16)
|
|
#define EP_MAXPSTREAMS_MASK GENMASK(14, 10)
|
|
#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
|
|
#define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10)
|
|
/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
|
|
#define EP_HAS_LSA BIT(15)
|
|
|
|
/* ep_info2 bitmasks */
|
|
#define ERROR_COUNT(p) (((p) & 0x3) << 1)
|
|
#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
|
|
#define EP_TYPE(p) ((p) << 3)
|
|
#define ISOC_OUT_EP 1
|
|
#define BULK_OUT_EP 2
|
|
#define INT_OUT_EP 3
|
|
#define CTRL_EP 4
|
|
#define ISOC_IN_EP 5
|
|
#define BULK_IN_EP 6
|
|
#define INT_IN_EP 7
|
|
/* bit 6 reserved. */
|
|
/* bit 7 is Device Initiate Disable - for disabling stream selection. */
|
|
#define MAX_BURST(p) (((p) << 8) & GENMASK(15, 8))
|
|
#define CTX_TO_MAX_BURST(p) (((p) & GENMASK(15, 8)) >> 8)
|
|
#define MAX_PACKET(p) (((p) << 16) & GENMASK(31, 16))
|
|
#define MAX_PACKET_MASK GENMASK(31, 16)
|
|
#define MAX_PACKET_DECODED(p) (((p) & GENMASK(31, 16)) >> 16)
|
|
|
|
/* tx_info bitmasks. */
|
|
#define EP_AVG_TRB_LENGTH(p) ((p) & GENMASK(15, 0))
|
|
#define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) << 16) & GENMASK(31, 16))
|
|
#define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) & GENMASK(23, 16)) >> 16) << 24)
|
|
#define CTX_TO_MAX_ESIT_PAYLOAD_LO(p) (((p) & GENMASK(31, 16)) >> 16)
|
|
#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) & GENMASK(31, 24)) >> 24)
|
|
|
|
/* deq bitmasks. */
|
|
#define EP_CTX_CYCLE_MASK BIT(0)
|
|
#define CTX_DEQ_MASK (~0xfL)
|
|
|
|
/**
|
|
* struct cdnsp_input_control_context
|
|
* Input control context;
|
|
*
|
|
* @drop_context: Set the bit of the endpoint context you want to disable.
|
|
* @add_context: Set the bit of the endpoint context you want to enable.
|
|
*/
|
|
struct cdnsp_input_control_ctx {
|
|
__le32 drop_flags;
|
|
__le32 add_flags;
|
|
__le32 rsvd2[6];
|
|
};
|
|
|
|
/**
|
|
* Represents everything that is needed to issue a command on the command ring.
|
|
*
|
|
* @in_ctx: Pointer to input context structure.
|
|
* @status: Command Completion Code for last command.
|
|
* @command_trb: Pointer to command TRB.
|
|
*/
|
|
struct cdnsp_command {
|
|
/* Input context for changing device state. */
|
|
struct cdnsp_container_ctx *in_ctx;
|
|
u32 status;
|
|
union cdnsp_trb *command_trb;
|
|
};
|
|
|
|
/**
|
|
* Stream context structure.
|
|
*
|
|
* @stream_ring: 64-bit stream ring address, cycle state, and stream type.
|
|
* @reserved: offset 0x14 - 0x1f reserved for controller internal use.
|
|
*/
|
|
struct cdnsp_stream_ctx {
|
|
__le64 stream_ring;
|
|
__le32 reserved[2];
|
|
};
|
|
|
|
/* Stream Context Types - bits 3:1 of stream ctx deq ptr. */
|
|
#define SCT_FOR_CTX(p) (((p) << 1) & GENMASK(3, 1))
|
|
/* Secondary stream array type, dequeue pointer is to a transfer ring. */
|
|
#define SCT_SEC_TR 0
|
|
/* Primary stream array type, dequeue pointer is to a transfer ring. */
|
|
#define SCT_PRI_TR 1
|
|
|
|
/**
|
|
* struct cdnsp_stream_info: Representing everything that is needed to
|
|
* supports stream capable endpoints.
|
|
* @stream_rings: Array of pointers containing Transfer rings for all
|
|
* supported streams.
|
|
* @num_streams: Number of streams, including stream 0.
|
|
* @stream_ctx_array: The stream context array may be bigger than the number
|
|
* of streams the driver asked for.
|
|
* @num_stream_ctxs: Number of streams.
|
|
* @ctx_array_dma: Dma address of Context Stream Array.
|
|
* @trb_address_map: For mapping physical TRB addresses to segments in
|
|
* stream rings.
|
|
* @td_count: Number of TDs associated with endpoint.
|
|
* @first_prime_det: First PRIME packet detected.
|
|
* @drbls_count: Number of allowed doorbells.
|
|
*/
|
|
struct cdnsp_stream_info {
|
|
struct cdnsp_ring **stream_rings;
|
|
unsigned int num_streams;
|
|
struct cdnsp_stream_ctx *stream_ctx_array;
|
|
unsigned int num_stream_ctxs;
|
|
dma_addr_t ctx_array_dma;
|
|
struct radix_tree_root trb_address_map;
|
|
int td_count;
|
|
u8 first_prime_det;
|
|
#define STREAM_DRBL_FIFO_DEPTH 2
|
|
u8 drbls_count;
|
|
};
|
|
|
|
#define STREAM_LOG_STREAMS 4
|
|
#define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS)
|
|
|
|
#if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1
|
|
#error "Not suupported stream value"
|
|
#endif
|
|
|
|
/**
|
|
* struct cdnsp_ep - extended device side representation of USB endpoint.
|
|
* @endpoint: usb endpoint
|
|
* @pending_req_list: List of requests queuing on transfer ring.
|
|
* @pdev: Device associated with this endpoint.
|
|
* @number: Endpoint number (1 - 15).
|
|
* idx: The device context index (DCI).
|
|
* interval: Interval between packets used for ISOC endpoint.
|
|
* @name: A human readable name e.g. ep1out.
|
|
* @direction: Endpoint direction.
|
|
* @buffering: Number of on-chip buffers related to endpoint.
|
|
* @buffering_period; Number of on-chip buffers related to periodic endpoint.
|
|
* @in_ctx: Pointer to input endpoint context structure.
|
|
* @out_ctx: Pointer to output endpoint context structure.
|
|
* @ring: Pointer to transfer ring.
|
|
* @stream_info: Hold stream information.
|
|
* @ep_state: Current state of endpoint.
|
|
* @skip: Sometimes the controller can not process isochronous endpoint ring
|
|
* quickly enough, and it will miss some isoc tds on the ring and
|
|
* generate Missed Service Error Event.
|
|
* Set skip flag when receive a Missed Service Error Event and
|
|
* process the missed tds on the endpoint ring.
|
|
*/
|
|
struct cdnsp_ep {
|
|
struct usb_ep endpoint;
|
|
struct list_head pending_list;
|
|
struct cdnsp_device *pdev;
|
|
u8 number;
|
|
u8 idx;
|
|
u32 interval;
|
|
char name[20];
|
|
u8 direction;
|
|
u8 buffering;
|
|
u8 buffering_period;
|
|
struct cdnsp_ep_ctx *in_ctx;
|
|
struct cdnsp_ep_ctx *out_ctx;
|
|
struct cdnsp_ring *ring;
|
|
struct cdnsp_stream_info stream_info;
|
|
unsigned int ep_state;
|
|
#define EP_ENABLED BIT(0)
|
|
#define EP_DIS_IN_RROGRESS BIT(1)
|
|
#define EP_HALTED BIT(2)
|
|
#define EP_STOPPED BIT(3)
|
|
#define EP_WEDGE BIT(4)
|
|
#define EP0_HALTED_STATUS BIT(5)
|
|
#define EP_HAS_STREAMS BIT(6)
|
|
|
|
bool skip;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_device_context_array
|
|
* @dev_context_ptr: Array of 64-bit DMA addresses for device contexts.
|
|
* @dma: DMA address for device contexts structure.
|
|
*/
|
|
struct cdnsp_device_context_array {
|
|
__le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1];
|
|
dma_addr_t dma;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_transfer_event.
|
|
* @buffer: 64-bit buffer address, or immediate data.
|
|
* @transfer_len: Data length transferred.
|
|
* @flags: Field is interpreted differently based on the type of TRB.
|
|
*/
|
|
struct cdnsp_transfer_event {
|
|
__le64 buffer;
|
|
__le32 transfer_len;
|
|
__le32 flags;
|
|
};
|
|
|
|
/* Invalidate event after disabling endpoint. */
|
|
#define TRB_EVENT_INVALIDATE 8
|
|
|
|
/* Transfer event TRB length bit mask. */
|
|
/* bits 0:23 */
|
|
#define EVENT_TRB_LEN(p) ((p) & GENMASK(23, 0))
|
|
/* Completion Code - only applicable for some types of TRBs */
|
|
#define COMP_CODE_MASK (0xff << 24)
|
|
#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
|
|
#define COMP_INVALID 0
|
|
#define COMP_SUCCESS 1
|
|
#define COMP_DATA_BUFFER_ERROR 2
|
|
#define COMP_BABBLE_DETECTED_ERROR 3
|
|
#define COMP_TRB_ERROR 5
|
|
#define COMP_RESOURCE_ERROR 7
|
|
#define COMP_NO_SLOTS_AVAILABLE_ERROR 9
|
|
#define COMP_INVALID_STREAM_TYPE_ERROR 10
|
|
#define COMP_SLOT_NOT_ENABLED_ERROR 11
|
|
#define COMP_ENDPOINT_NOT_ENABLED_ERROR 12
|
|
#define COMP_SHORT_PACKET 13
|
|
#define COMP_RING_UNDERRUN 14
|
|
#define COMP_RING_OVERRUN 15
|
|
#define COMP_VF_EVENT_RING_FULL_ERROR 16
|
|
#define COMP_PARAMETER_ERROR 17
|
|
#define COMP_CONTEXT_STATE_ERROR 19
|
|
#define COMP_EVENT_RING_FULL_ERROR 21
|
|
#define COMP_INCOMPATIBLE_DEVICE_ERROR 22
|
|
#define COMP_MISSED_SERVICE_ERROR 23
|
|
#define COMP_COMMAND_RING_STOPPED 24
|
|
#define COMP_COMMAND_ABORTED 25
|
|
#define COMP_STOPPED 26
|
|
#define COMP_STOPPED_LENGTH_INVALID 27
|
|
#define COMP_STOPPED_SHORT_PACKET 28
|
|
#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29
|
|
#define COMP_ISOCH_BUFFER_OVERRUN 31
|
|
#define COMP_EVENT_LOST_ERROR 32
|
|
#define COMP_UNDEFINED_ERROR 33
|
|
#define COMP_INVALID_STREAM_ID_ERROR 34
|
|
|
|
/*Transfer Event NRDY bit fields */
|
|
#define TRB_TO_DEV_STREAM(p) ((p) & GENMASK(16, 0))
|
|
#define TRB_TO_HOST_STREAM(p) ((p) & GENMASK(16, 0))
|
|
#define STREAM_PRIME_ACK 0xFFFE
|
|
#define STREAM_REJECTED 0xFFFF
|
|
|
|
/** Transfer Event bit fields **/
|
|
#define TRB_TO_EP_ID(p) (((p) & GENMASK(20, 16)) >> 16)
|
|
|
|
/**
|
|
* struct cdnsp_link_trb
|
|
* @segment_ptr: 64-bit segment pointer.
|
|
* @intr_target: Interrupter target.
|
|
* @control: Flags.
|
|
*/
|
|
struct cdnsp_link_trb {
|
|
__le64 segment_ptr;
|
|
__le32 intr_target;
|
|
__le32 control;
|
|
};
|
|
|
|
/* control bitfields */
|
|
#define LINK_TOGGLE BIT(1)
|
|
|
|
/**
|
|
* struct cdnsp_event_cmd - Command completion event TRB.
|
|
* cmd_trb: Pointer to command TRB, or the value passed by the event data trb
|
|
* status: Command completion parameters and error code.
|
|
* flags: Flags.
|
|
*/
|
|
struct cdnsp_event_cmd {
|
|
__le64 cmd_trb;
|
|
__le32 status;
|
|
__le32 flags;
|
|
};
|
|
|
|
/* flags bitmasks */
|
|
|
|
/* Address device - disable SetAddress. */
|
|
#define TRB_BSR BIT(9)
|
|
|
|
/* Configure Endpoint - Deconfigure. */
|
|
#define TRB_DC BIT(9)
|
|
|
|
/* Force Header */
|
|
#define TRB_FH_TO_PACKET_TYPE(p) ((p) & GENMASK(4, 0))
|
|
#define TRB_FH_TR_PACKET 0x4
|
|
#define TRB_FH_TO_DEVICE_ADDRESS(p) (((p) << 25) & GENMASK(31, 25))
|
|
#define TRB_FH_TR_PACKET_DEV_NOT 0x6
|
|
#define TRB_FH_TO_NOT_TYPE(p) (((p) << 4) & GENMASK(7, 4))
|
|
#define TRB_FH_TR_PACKET_FUNCTION_WAKE 0x1
|
|
#define TRB_FH_TO_INTERFACE(p) (((p) << 8) & GENMASK(15, 8))
|
|
|
|
enum cdnsp_setup_dev {
|
|
SETUP_CONTEXT_ONLY,
|
|
SETUP_CONTEXT_ADDRESS,
|
|
};
|
|
|
|
/* bits 24:31 are the slot ID. */
|
|
#define TRB_TO_SLOT_ID(p) (((p) & GENMASK(31, 24)) >> 24)
|
|
#define SLOT_ID_FOR_TRB(p) (((p) << 24) & GENMASK(31, 24))
|
|
|
|
/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */
|
|
#define TRB_TO_EP_INDEX(p) (((p) >> 16) & 0x1f)
|
|
|
|
#define EP_ID_FOR_TRB(p) ((((p) + 1) << 16) & GENMASK(20, 16))
|
|
|
|
#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
|
|
#define TRB_TO_SUSPEND_PORT(p) (((p) >> 23) & 0x1)
|
|
#define LAST_EP_INDEX 30
|
|
|
|
/* Set TR Dequeue Pointer command TRB fields. */
|
|
#define TRB_TO_STREAM_ID(p) ((((p) & GENMASK(31, 16)) >> 16))
|
|
#define STREAM_ID_FOR_TRB(p) ((((p)) << 16) & GENMASK(31, 16))
|
|
#define SCT_FOR_TRB(p) (((p) << 1) & 0x7)
|
|
|
|
/* Link TRB specific fields. */
|
|
#define TRB_TC BIT(1)
|
|
|
|
/* Port Status Change Event TRB fields. */
|
|
/* Port ID - bits 31:24. */
|
|
#define GET_PORT_ID(p) (((p) & GENMASK(31, 24)) >> 24)
|
|
#define SET_PORT_ID(p) (((p) << 24) & GENMASK(31, 24))
|
|
#define EVENT_DATA BIT(2)
|
|
|
|
/* Normal TRB fields. */
|
|
/* transfer_len bitmasks - bits 0:16. */
|
|
#define TRB_LEN(p) ((p) & GENMASK(16, 0))
|
|
/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */
|
|
#define TRB_TD_SIZE(p) (min((p), (u32)31) << 17)
|
|
#define GET_TD_SIZE(p) (((p) & GENMASK(21, 17)) >> 17)
|
|
/*
|
|
* Controller uses the TD_SIZE field for TBC if Extended TBC
|
|
* is enabled (ETE).
|
|
*/
|
|
#define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17)
|
|
/* Interrupter Target - which MSI-X vector to target the completion event at. */
|
|
#define TRB_INTR_TARGET(p) (((p) << 22) & GENMASK(31, 22))
|
|
#define GET_INTR_TARGET(p) (((p) & GENMASK(31, 22)) >> 22)
|
|
/*
|
|
* Total burst count field, Rsvdz on controller with Extended TBC
|
|
* enabled (ETE).
|
|
*/
|
|
#define TRB_TBC(p) (((p) & 0x3) << 7)
|
|
#define TRB_TLBPC(p) (((p) & 0xf) << 16)
|
|
|
|
/* Cycle bit - indicates TRB ownership by driver or driver.*/
|
|
#define TRB_CYCLE BIT(0)
|
|
/*
|
|
* Force next event data TRB to be evaluated before task switch.
|
|
* Used to pass OS data back after a TD completes.
|
|
*/
|
|
#define TRB_ENT BIT(1)
|
|
/* Interrupt on short packet. */
|
|
#define TRB_ISP BIT(2)
|
|
/* Set PCIe no snoop attribute. */
|
|
#define TRB_NO_SNOOP BIT(3)
|
|
/* Chain multiple TRBs into a TD. */
|
|
#define TRB_CHAIN BIT(4)
|
|
/* Interrupt on completion. */
|
|
#define TRB_IOC BIT(5)
|
|
/* The buffer pointer contains immediate data. */
|
|
#define TRB_IDT BIT(6)
|
|
/* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */
|
|
#define TRB_STAT BIT(7)
|
|
/* Block Event Interrupt. */
|
|
#define TRB_BEI BIT(9)
|
|
|
|
/* Control transfer TRB specific fields. */
|
|
#define TRB_DIR_IN BIT(16)
|
|
|
|
/* TRB bit mask in Data Stage TRB */
|
|
#define TRB_SETUPID_BITMASK GENMASK(9, 8)
|
|
#define TRB_SETUPID(p) ((p) << 8)
|
|
#define TRB_SETUPID_TO_TYPE(p) (((p) & TRB_SETUPID_BITMASK) >> 8)
|
|
|
|
#define TRB_SETUP_SPEEDID_USB3 0x1
|
|
#define TRB_SETUP_SPEEDID_USB2 0x0
|
|
#define TRB_SETUP_SPEEDID(p) ((p) & (1 << 7))
|
|
|
|
#define TRB_SETUPSTAT_ACK 0x1
|
|
#define TRB_SETUPSTAT_STALL 0x0
|
|
#define TRB_SETUPSTAT(p) ((p) << 6)
|
|
|
|
/* Isochronous TRB specific fields */
|
|
#define TRB_SIA BIT(31)
|
|
#define TRB_FRAME_ID(p) (((p) << 20) & GENMASK(30, 20))
|
|
|
|
struct cdnsp_generic_trb {
|
|
__le32 field[4];
|
|
};
|
|
|
|
union cdnsp_trb {
|
|
struct cdnsp_link_trb link;
|
|
struct cdnsp_transfer_event trans_event;
|
|
struct cdnsp_event_cmd event_cmd;
|
|
struct cdnsp_generic_trb generic;
|
|
};
|
|
|
|
/* TRB bit mask. */
|
|
#define TRB_TYPE_BITMASK GENMASK(15, 10)
|
|
#define TRB_TYPE(p) ((p) << 10)
|
|
#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
|
|
|
|
/* TRB type IDs. */
|
|
/* bulk, interrupt, isoc scatter/gather, and control data stage. */
|
|
#define TRB_NORMAL 1
|
|
/* Setup Stage for control transfers. */
|
|
#define TRB_SETUP 2
|
|
/* Data Stage for control transfers. */
|
|
#define TRB_DATA 3
|
|
/* Status Stage for control transfers. */
|
|
#define TRB_STATUS 4
|
|
/* ISOC transfers. */
|
|
#define TRB_ISOC 5
|
|
/* TRB for linking ring segments. */
|
|
#define TRB_LINK 6
|
|
#define TRB_EVENT_DATA 7
|
|
/* Transfer Ring No-op (not for the command ring). */
|
|
#define TRB_TR_NOOP 8
|
|
|
|
/* Command TRBs */
|
|
/* Enable Slot Command. */
|
|
#define TRB_ENABLE_SLOT 9
|
|
/* Disable Slot Command. */
|
|
#define TRB_DISABLE_SLOT 10
|
|
/* Address Device Command. */
|
|
#define TRB_ADDR_DEV 11
|
|
/* Configure Endpoint Command. */
|
|
#define TRB_CONFIG_EP 12
|
|
/* Evaluate Context Command. */
|
|
#define TRB_EVAL_CONTEXT 13
|
|
/* Reset Endpoint Command. */
|
|
#define TRB_RESET_EP 14
|
|
/* Stop Transfer Ring Command. */
|
|
#define TRB_STOP_RING 15
|
|
/* Set Transfer Ring Dequeue Pointer Command. */
|
|
#define TRB_SET_DEQ 16
|
|
/* Reset Device Command. */
|
|
#define TRB_RESET_DEV 17
|
|
/* Force Event Command (opt). */
|
|
#define TRB_FORCE_EVENT 18
|
|
/* Force Header Command - generate a transaction or link management packet. */
|
|
#define TRB_FORCE_HEADER 22
|
|
/* No-op Command - not for transfer rings. */
|
|
#define TRB_CMD_NOOP 23
|
|
/* TRB IDs 24-31 reserved. */
|
|
|
|
/* Event TRBS. */
|
|
/* Transfer Event. */
|
|
#define TRB_TRANSFER 32
|
|
/* Command Completion Event. */
|
|
#define TRB_COMPLETION 33
|
|
/* Port Status Change Event. */
|
|
#define TRB_PORT_STATUS 34
|
|
/* Device Controller Event. */
|
|
#define TRB_HC_EVENT 37
|
|
/* MFINDEX Wrap Event - microframe counter wrapped. */
|
|
#define TRB_MFINDEX_WRAP 39
|
|
/* TRB IDs 40-47 reserved. */
|
|
/* Endpoint Not Ready Event. */
|
|
#define TRB_ENDPOINT_NRDY 48
|
|
/* TRB IDs 49-53 reserved. */
|
|
/* Halt Endpoint Command. */
|
|
#define TRB_HALT_ENDPOINT 54
|
|
/* Doorbell Overflow Event. */
|
|
#define TRB_DRB_OVERFLOW 57
|
|
/* Flush Endpoint Command. */
|
|
#define TRB_FLUSH_ENDPOINT 58
|
|
|
|
#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
|
|
#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
|
|
cpu_to_le32(TRB_TYPE(TRB_LINK)))
|
|
#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
|
|
cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
|
|
|
|
/*
|
|
* TRBS_PER_SEGMENT must be a multiple of 4.
|
|
* The command ring is 64-byte aligned, so it must also be greater than 16.
|
|
*/
|
|
#define TRBS_PER_SEGMENT 256
|
|
#define TRBS_PER_EVENT_SEGMENT 256
|
|
#define TRBS_PER_EV_DEQ_UPDATE 100
|
|
#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT * 16)
|
|
#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
|
|
/* TRB buffer pointers can't cross 64KB boundaries. */
|
|
#define TRB_MAX_BUFF_SHIFT 16
|
|
#define TRB_MAX_BUFF_SIZE BIT(TRB_MAX_BUFF_SHIFT)
|
|
/* How much data is left before the 64KB boundary? */
|
|
#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
|
|
((addr) & (TRB_MAX_BUFF_SIZE - 1)))
|
|
|
|
/**
|
|
* struct cdnsp_segment - segment related data.
|
|
* @trbs: Array of Transfer Request Blocks.
|
|
* @next: Pointer to the next segment.
|
|
* @dma: DMA address of current segment.
|
|
* @bounce_dma: Bounce buffer DMA address .
|
|
* @bounce_buf: Bounce buffer virtual address.
|
|
* bounce_offs: Bounce buffer offset.
|
|
* bounce_len: Bounce buffer length.
|
|
*/
|
|
struct cdnsp_segment {
|
|
union cdnsp_trb *trbs;
|
|
struct cdnsp_segment *next;
|
|
dma_addr_t dma;
|
|
/* Max packet sized bounce buffer for td-fragmant alignment */
|
|
dma_addr_t bounce_dma;
|
|
void *bounce_buf;
|
|
unsigned int bounce_offs;
|
|
unsigned int bounce_len;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_td - Transfer Descriptor object.
|
|
* @td_list: Used for binding TD with ep_ring->td_list.
|
|
* @preq: Request associated with this TD
|
|
* @start_seg: Segment containing the first_trb in TD.
|
|
* @first_trb: First TRB for this TD.
|
|
* @last_trb: Last TRB related with TD.
|
|
* @bounce_seg: Bounce segment for this TD.
|
|
* @request_length_set: actual_length of the request has already been set.
|
|
* @drbl - TD has been added to HW scheduler - only for stream capable
|
|
* endpoints.
|
|
*/
|
|
struct cdnsp_td {
|
|
struct list_head td_list;
|
|
struct cdnsp_request *preq;
|
|
struct cdnsp_segment *start_seg;
|
|
union cdnsp_trb *first_trb;
|
|
union cdnsp_trb *last_trb;
|
|
struct cdnsp_segment *bounce_seg;
|
|
bool request_length_set;
|
|
bool drbl;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring.
|
|
* @new_deq_seg: New dequeue segment.
|
|
* @new_deq_ptr: New dequeue pointer.
|
|
* @new_cycle_state: New cycle state.
|
|
* @stream_id: stream id for which new dequeue pointer has been selected.
|
|
*/
|
|
struct cdnsp_dequeue_state {
|
|
struct cdnsp_segment *new_deq_seg;
|
|
union cdnsp_trb *new_deq_ptr;
|
|
int new_cycle_state;
|
|
unsigned int stream_id;
|
|
};
|
|
|
|
enum cdnsp_ring_type {
|
|
TYPE_CTRL = 0,
|
|
TYPE_ISOC,
|
|
TYPE_BULK,
|
|
TYPE_INTR,
|
|
TYPE_STREAM,
|
|
TYPE_COMMAND,
|
|
TYPE_EVENT,
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_ring - information describing transfer, command or event ring.
|
|
* @first_seg: First segment on transfer ring.
|
|
* @last_seg: Last segment on transfer ring.
|
|
* @enqueue: SW enqueue pointer address.
|
|
* @enq_seg: SW enqueue segment address.
|
|
* @dequeue: SW dequeue pointer address.
|
|
* @deq_seg: SW dequeue segment address.
|
|
* @td_list: transfer descriptor list associated with this ring.
|
|
* @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle
|
|
* field to give ownership of the TRB to the device controller
|
|
* (if we are the producer) or to check if we own the TRB
|
|
* (if we are the consumer).
|
|
* @stream_id: Stream id
|
|
* @stream_active: Stream is active - PRIME packet has been detected.
|
|
* @stream_rejected: This ring has been rejected by host.
|
|
* @num_tds: Number of TDs associated with ring.
|
|
* @num_segs: Number of segments.
|
|
* @num_trbs_free: Number of free TRBs on the ring.
|
|
* @bounce_buf_len: Length of bounce buffer.
|
|
* @type: Ring type - event, transfer, or command ring.
|
|
* @last_td_was_short - TD is short TD.
|
|
* @trb_address_map: For mapping physical TRB addresses to segments in
|
|
* stream rings.
|
|
*/
|
|
struct cdnsp_ring {
|
|
struct cdnsp_segment *first_seg;
|
|
struct cdnsp_segment *last_seg;
|
|
union cdnsp_trb *enqueue;
|
|
struct cdnsp_segment *enq_seg;
|
|
union cdnsp_trb *dequeue;
|
|
struct cdnsp_segment *deq_seg;
|
|
struct list_head td_list;
|
|
u32 cycle_state;
|
|
unsigned int stream_id;
|
|
unsigned int stream_active;
|
|
unsigned int stream_rejected;
|
|
int num_tds;
|
|
unsigned int num_segs;
|
|
unsigned int num_trbs_free;
|
|
unsigned int bounce_buf_len;
|
|
enum cdnsp_ring_type type;
|
|
bool last_td_was_short;
|
|
struct radix_tree_root *trb_address_map;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_erst_entry - even ring segment table entry object.
|
|
* @seg_addr: 64-bit event ring segment address.
|
|
* seg_size: Number of TRBs in segment.;
|
|
*/
|
|
struct cdnsp_erst_entry {
|
|
__le64 seg_addr;
|
|
__le32 seg_size;
|
|
/* Set to zero */
|
|
__le32 rsvd;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_erst - even ring segment table for event ring.
|
|
* @entries: Array of event ring segments
|
|
* @num_entries: Number of segments in entries array.
|
|
* @erst_dma_addr: DMA address for entries array.
|
|
*/
|
|
struct cdnsp_erst {
|
|
struct cdnsp_erst_entry *entries;
|
|
unsigned int num_entries;
|
|
dma_addr_t erst_dma_addr;
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_request - extended device side representation of usb_request
|
|
* object .
|
|
* @td: Transfer descriptor associated with this request.
|
|
* @request: Generic usb_request object describing single I/O request.
|
|
* @list: Used to adding request to endpoint pending_list.
|
|
* @pep: Extended representation of usb_ep object
|
|
* @epnum: Endpoint number associated with usb request.
|
|
* @direction: Endpoint direction for usb request.
|
|
*/
|
|
struct cdnsp_request {
|
|
struct cdnsp_td td;
|
|
struct usb_request request;
|
|
struct list_head list;
|
|
struct cdnsp_ep *pep;
|
|
u8 epnum;
|
|
unsigned direction:1;
|
|
};
|
|
|
|
#define ERST_NUM_SEGS 1
|
|
|
|
/* Stages used during enumeration process.*/
|
|
enum cdnsp_ep0_stage {
|
|
CDNSP_SETUP_STAGE,
|
|
CDNSP_DATA_STAGE,
|
|
CDNSP_STATUS_STAGE,
|
|
};
|
|
|
|
/**
|
|
* struct cdnsp_port - holds information about detected ports.
|
|
* @port_num: Port number.
|
|
* @exist: Indicate if port exist.
|
|
* maj_rev: Major revision.
|
|
* min_rev: Minor revision.
|
|
*/
|
|
struct cdnsp_port {
|
|
struct cdnsp_port_regs __iomem *regs;
|
|
u8 port_num;
|
|
u8 exist;
|
|
u8 maj_rev;
|
|
u8 min_rev;
|
|
};
|
|
|
|
#define CDNSP_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
|
|
#define CDNSP_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
|
|
#define CDNSP_EXT_PORT_OFF(x) ((x) & 0xff)
|
|
#define CDNSP_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
|
|
|
|
/**
|
|
* struct cdnsp_device - represent USB device.
|
|
* @dev: Pointer to device structure associated whit this controller.
|
|
* @gadget: Device side representation of the peripheral controller.
|
|
* @gadget_driver: Pointer to the gadget driver.
|
|
* @irq: IRQ line number used by device side.
|
|
* @regs:IO device memory.
|
|
* @cap_regs: Capability registers.
|
|
* @op_regs: Operational registers.
|
|
* @run_regs: Runtime registers.
|
|
* @dba: Device base address register.
|
|
* @ir_set: Current interrupter register set.
|
|
* @port20_regs: Port 2.0 Peripheral Configuration Registers.
|
|
* @port3x_regs: USB3.x Port Peripheral Configuration Registers.
|
|
* @rev_cap: Controller Capabilities Registers.
|
|
* @hcs_params1: Cached register copies of read-only HCSPARAMS1
|
|
* @hcc_params: Cached register copies of read-only HCCPARAMS1
|
|
* @setup: Temporary buffer for setup packet.
|
|
* @ep0_preq: Internal allocated request used during enumeration.
|
|
* @ep0_stage: ep0 stage during enumeration process.
|
|
* @three_stage_setup: Three state or two state setup.
|
|
* @ep0_expect_in: Data IN expected for control transfer.
|
|
* @setup_id: Setup identifier.
|
|
* @setup_speed - Speed detected for current SETUP packet.
|
|
* @setup_buf: Buffer for SETUP packet.
|
|
* @device_address: Current device address.
|
|
* @may_wakeup: remote wakeup enabled/disabled.
|
|
* @lock: Lock used in interrupt thread context.
|
|
* @hci_version: device controller version.
|
|
* @dcbaa: Device context base address array.
|
|
* @cmd_ring: Command ring.
|
|
* @cmd: Represent all what is needed to issue command on Command Ring.
|
|
* @event_ring: Event ring.
|
|
* @erst: Event Ring Segment table
|
|
* @slot_id: Current Slot ID. Should be 0 or 1.
|
|
* @out_ctx: Output context.
|
|
* @in_ctx: Input context.
|
|
* @eps: array of endpoints object associated with device.
|
|
* @usb2_hw_lpm_capable: hardware lpm is enabled;
|
|
* @u1_allowed: Allow device transition to U1 state.
|
|
* @u2_allowed: Allow device transition to U2 state
|
|
* @device_pool: DMA pool for allocating input and output context.
|
|
* @segment_pool: DMA pool for allocating new segments.
|
|
* @cdnsp_state: Current state of controller.
|
|
* @link_state: Current link state.
|
|
* @usb2_port - Port USB 2.0.
|
|
* @usb3_port - Port USB 3.0.
|
|
* @active_port - Current selected Port.
|
|
* @test_mode: selected Test Mode.
|
|
*/
|
|
struct cdnsp_device {
|
|
struct device *dev;
|
|
struct usb_gadget gadget;
|
|
struct usb_gadget_driver *gadget_driver;
|
|
unsigned int irq;
|
|
void __iomem *regs;
|
|
|
|
/* Registers map */
|
|
struct cdnsp_cap_regs __iomem *cap_regs;
|
|
struct cdnsp_op_regs __iomem *op_regs;
|
|
struct cdnsp_run_regs __iomem *run_regs;
|
|
struct cdnsp_doorbell_array __iomem *dba;
|
|
struct cdnsp_intr_reg __iomem *ir_set;
|
|
struct cdnsp_20port_cap __iomem *port20_regs;
|
|
struct cdnsp_3xport_cap __iomem *port3x_regs;
|
|
struct cdnsp_rev_cap __iomem *rev_cap;
|
|
|
|
/* Cached register copies of read-only CDNSP data */
|
|
__u32 hcs_params1;
|
|
__u32 hcs_params3;
|
|
__u32 hcc_params;
|
|
/* Lock used in interrupt thread context. */
|
|
spinlock_t lock;
|
|
struct usb_ctrlrequest setup;
|
|
struct cdnsp_request ep0_preq;
|
|
enum cdnsp_ep0_stage ep0_stage;
|
|
u8 three_stage_setup;
|
|
u8 ep0_expect_in;
|
|
u8 setup_id;
|
|
u8 setup_speed;
|
|
void *setup_buf;
|
|
u8 device_address;
|
|
int may_wakeup;
|
|
u16 hci_version;
|
|
|
|
/* data structures */
|
|
struct cdnsp_device_context_array *dcbaa;
|
|
struct cdnsp_ring *cmd_ring;
|
|
struct cdnsp_command cmd;
|
|
struct cdnsp_ring *event_ring;
|
|
struct cdnsp_erst erst;
|
|
int slot_id;
|
|
|
|
/*
|
|
* Commands to the hardware are passed an "input context" that
|
|
* tells the hardware what to change in its data structures.
|
|
* The hardware will return changes in an "output context" that
|
|
* software must allocate for the hardware. .
|
|
*/
|
|
struct cdnsp_container_ctx out_ctx;
|
|
struct cdnsp_container_ctx in_ctx;
|
|
struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM];
|
|
u8 usb2_hw_lpm_capable:1;
|
|
u8 u1_allowed:1;
|
|
u8 u2_allowed:1;
|
|
|
|
/* DMA pools */
|
|
struct dma_pool *device_pool;
|
|
struct dma_pool *segment_pool;
|
|
|
|
#define CDNSP_STATE_HALTED BIT(1)
|
|
#define CDNSP_STATE_DYING BIT(2)
|
|
#define CDNSP_STATE_DISCONNECT_PENDING BIT(3)
|
|
#define CDNSP_WAKEUP_PENDING BIT(4)
|
|
unsigned int cdnsp_state;
|
|
unsigned int link_state;
|
|
|
|
struct cdnsp_port usb2_port;
|
|
struct cdnsp_port usb3_port;
|
|
struct cdnsp_port *active_port;
|
|
u16 test_mode;
|
|
};
|
|
|
|
/*
|
|
* Registers should always be accessed with double word or quad word accesses.
|
|
*
|
|
* Registers with 64-bit address pointers should be written to with
|
|
* dword accesses by writing the low dword first (ptr[0]), then the high dword
|
|
* (ptr[1]) second. controller implementations that do not support 64-bit
|
|
* address pointers will ignore the high dword, and write order is irrelevant.
|
|
*/
|
|
static inline u64 cdnsp_read_64(__le64 __iomem *regs)
|
|
{
|
|
return lo_hi_readq(regs);
|
|
}
|
|
|
|
static inline void cdnsp_write_64(const u64 val, __le64 __iomem *regs)
|
|
{
|
|
lo_hi_writeq(val, regs);
|
|
}
|
|
|
|
/* CDNSP memory management functions. */
|
|
void cdnsp_mem_cleanup(struct cdnsp_device *pdev);
|
|
int cdnsp_mem_init(struct cdnsp_device *pdev);
|
|
int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev);
|
|
void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev);
|
|
void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *ep);
|
|
int cdnsp_endpoint_init(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep,
|
|
gfp_t mem_flags);
|
|
int cdnsp_ring_expansion(struct cdnsp_device *pdev,
|
|
struct cdnsp_ring *ring,
|
|
unsigned int num_trbs, gfp_t flags);
|
|
struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *ep, u64 address);
|
|
int cdnsp_alloc_stream_info(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep,
|
|
unsigned int num_stream_ctxs,
|
|
unsigned int num_streams);
|
|
int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
|
|
void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
|
|
|
|
/* Device controller glue. */
|
|
int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id);
|
|
int cdnsp_halt(struct cdnsp_device *pdev);
|
|
void cdnsp_died(struct cdnsp_device *pdev);
|
|
int cdnsp_reset(struct cdnsp_device *pdev);
|
|
irqreturn_t cdnsp_irq_handler(int irq, void *priv);
|
|
int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup);
|
|
void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *usbsssp_data,
|
|
struct usb_request *req, int enable);
|
|
irqreturn_t cdnsp_thread_irq_handler(int irq, void *data);
|
|
|
|
/* Ring, segment, TRB, and TD functions. */
|
|
dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg,
|
|
union cdnsp_trb *trb);
|
|
bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb);
|
|
bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring,
|
|
struct cdnsp_segment *seg,
|
|
union cdnsp_trb *trb);
|
|
int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev);
|
|
void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
|
|
union cdnsp_trb *event_ring_deq,
|
|
u8 clear_ehb);
|
|
void cdnsp_initialize_ring_info(struct cdnsp_ring *ring);
|
|
void cdnsp_ring_cmd_db(struct cdnsp_device *pdev);
|
|
void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type);
|
|
void cdnsp_queue_address_device(struct cdnsp_device *pdev,
|
|
dma_addr_t in_ctx_ptr,
|
|
enum cdnsp_setup_dev setup);
|
|
void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev,
|
|
unsigned int ep_index);
|
|
int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
|
|
int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
|
|
int cdnsp_queue_isoc_tx_prepare(struct cdnsp_device *pdev,
|
|
struct cdnsp_request *preq);
|
|
void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev,
|
|
dma_addr_t in_ctx_ptr);
|
|
void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index);
|
|
void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev,
|
|
unsigned int ep_index);
|
|
void cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev,
|
|
unsigned int ep_index);
|
|
void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num);
|
|
void cdnsp_queue_reset_device(struct cdnsp_device *pdev);
|
|
void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep,
|
|
struct cdnsp_dequeue_state *deq_state);
|
|
void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep);
|
|
void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring);
|
|
void cdnsp_set_link_state(struct cdnsp_device *pdev,
|
|
__le32 __iomem *port_regs, u32 link_state);
|
|
u32 cdnsp_port_state_to_neutral(u32 state);
|
|
|
|
/* CDNSP device controller contexts. */
|
|
int cdnsp_enable_slot(struct cdnsp_device *pdev);
|
|
int cdnsp_disable_slot(struct cdnsp_device *pdev);
|
|
struct cdnsp_input_control_ctx
|
|
*cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx);
|
|
struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx);
|
|
struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx,
|
|
unsigned int ep_index);
|
|
/* CDNSP gadget interface. */
|
|
void cdnsp_suspend_gadget(struct cdnsp_device *pdev);
|
|
void cdnsp_resume_gadget(struct cdnsp_device *pdev);
|
|
void cdnsp_disconnect_gadget(struct cdnsp_device *pdev);
|
|
void cdnsp_gadget_giveback(struct cdnsp_ep *pep, struct cdnsp_request *preq,
|
|
int status);
|
|
int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
|
|
int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
|
|
unsigned int cdnsp_port_speed(unsigned int port_status);
|
|
void cdnsp_irq_reset(struct cdnsp_device *pdev);
|
|
int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep, int value);
|
|
int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
|
|
int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
|
|
void cdnsp_setup_analyze(struct cdnsp_device *pdev);
|
|
int cdnsp_status_stage(struct cdnsp_device *pdev);
|
|
int cdnsp_reset_device(struct cdnsp_device *pdev);
|
|
|
|
/**
|
|
* next_request - gets the next request on the given list
|
|
* @list: the request list to operate on
|
|
*
|
|
* Caller should take care of locking. This function return NULL or the first
|
|
* request available on list.
|
|
*/
|
|
static inline struct cdnsp_request *next_request(struct list_head *list)
|
|
{
|
|
return list_first_entry_or_null(list, struct cdnsp_request, list);
|
|
}
|
|
|
|
#define to_cdnsp_ep(ep) (container_of(ep, struct cdnsp_ep, endpoint))
|
|
#define gadget_to_cdnsp(g) (container_of(g, struct cdnsp_device, gadget))
|
|
#define request_to_cdnsp_request(r) (container_of(r, struct cdnsp_request, \
|
|
request))
|
|
#define to_cdnsp_request(r) (container_of(r, struct cdnsp_request, request))
|
|
int cdnsp_remove_request(struct cdnsp_device *pdev, struct cdnsp_request *preq,
|
|
struct cdnsp_ep *pep);
|
|
|
|
#endif /* __LINUX_CDNSP_GADGET_H */
|