32 строки
1.3 KiB
Plaintext
32 строки
1.3 KiB
Plaintext
What: /sys/bus/i2c/devices/.../bd9571mwv-regulator.*.auto/backup_mode
|
|
Date: Jul 2018
|
|
KernelVersion: 4.19
|
|
Contact: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Description: Read/write the current state of DDR Backup Mode, which controls
|
|
if DDR power rails will be kept powered during system suspend.
|
|
("on"/"1" = enabled, "off"/"0" = disabled).
|
|
Two types of power switches (or control signals) can be used:
|
|
|
|
A. With a momentary power switch (or pulse signal), DDR
|
|
Backup Mode is enabled by default when available, as the
|
|
PMIC will be configured only during system suspend.
|
|
B. With a toggle power switch (or level signal), the
|
|
following steps must be followed exactly:
|
|
|
|
1. Configure PMIC for backup mode, to change the role of
|
|
the accessory power switch from a power switch to a
|
|
wake-up switch,
|
|
2. Switch accessory power switch off, to prepare for
|
|
system suspend, which is a manual step not controlled
|
|
by software,
|
|
3. Suspend system,
|
|
4. Switch accessory power switch on, to resume the
|
|
system.
|
|
|
|
DDR Backup Mode must be explicitly enabled by the user,
|
|
to invoke step 1.
|
|
|
|
See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
|
|
Users: User space applications for embedded boards equipped with a
|
|
BD9571MWV PMIC.
|