408 строки
11 KiB
C
408 строки
11 KiB
C
/*
|
|
* Copyright (c) 2012-2016 Synaptics Incorporated
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/rmi.h>
|
|
#include <linux/input.h>
|
|
#include <linux/slab.h>
|
|
#include "rmi_driver.h"
|
|
|
|
#define RMI_F30_QUERY_SIZE 2
|
|
|
|
/* Defs for Query 0 */
|
|
#define RMI_F30_EXTENDED_PATTERNS 0x01
|
|
#define RMI_F30_HAS_MAPPABLE_BUTTONS BIT(1)
|
|
#define RMI_F30_HAS_LED BIT(2)
|
|
#define RMI_F30_HAS_GPIO BIT(3)
|
|
#define RMI_F30_HAS_HAPTIC BIT(4)
|
|
#define RMI_F30_HAS_GPIO_DRV_CTL BIT(5)
|
|
#define RMI_F30_HAS_MECH_MOUSE_BTNS BIT(6)
|
|
|
|
/* Defs for Query 1 */
|
|
#define RMI_F30_GPIO_LED_COUNT 0x1F
|
|
|
|
/* Defs for Control Registers */
|
|
#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01
|
|
#define RMI_F30_CTRL_1_HALT BIT(4)
|
|
#define RMI_F30_CTRL_1_HALTED BIT(5)
|
|
#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03
|
|
|
|
#define RMI_F30_CTRL_MAX_REGS 32
|
|
#define RMI_F30_CTRL_MAX_BYTES DIV_ROUND_UP(RMI_F30_CTRL_MAX_REGS, 8)
|
|
#define RMI_F30_CTRL_MAX_REG_BLOCKS 11
|
|
|
|
#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \
|
|
+ 1 \
|
|
+ RMI_F30_CTRL_MAX_BYTES \
|
|
+ RMI_F30_CTRL_MAX_BYTES \
|
|
+ RMI_F30_CTRL_MAX_BYTES \
|
|
+ 6 \
|
|
+ RMI_F30_CTRL_MAX_REGS \
|
|
+ RMI_F30_CTRL_MAX_REGS \
|
|
+ RMI_F30_CTRL_MAX_BYTES \
|
|
+ 1 \
|
|
+ 1)
|
|
|
|
#define TRACKSTICK_RANGE_START 3
|
|
#define TRACKSTICK_RANGE_END 6
|
|
|
|
struct rmi_f30_ctrl_data {
|
|
int address;
|
|
int length;
|
|
u8 *regs;
|
|
};
|
|
|
|
struct f30_data {
|
|
/* Query Data */
|
|
bool has_extended_pattern;
|
|
bool has_mappable_buttons;
|
|
bool has_led;
|
|
bool has_gpio;
|
|
bool has_haptic;
|
|
bool has_gpio_driver_control;
|
|
bool has_mech_mouse_btns;
|
|
u8 gpioled_count;
|
|
|
|
u8 register_count;
|
|
|
|
/* Control Register Data */
|
|
struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS];
|
|
u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE];
|
|
u32 ctrl_regs_size;
|
|
|
|
u8 data_regs[RMI_F30_CTRL_MAX_BYTES];
|
|
u16 *gpioled_key_map;
|
|
|
|
struct input_dev *input;
|
|
|
|
struct rmi_function *f03;
|
|
bool trackstick_buttons;
|
|
};
|
|
|
|
static int rmi_f30_read_control_parameters(struct rmi_function *fn,
|
|
struct f30_data *f30)
|
|
{
|
|
int error;
|
|
|
|
error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
|
|
f30->ctrl_regs, f30->ctrl_regs_size);
|
|
if (error) {
|
|
dev_err(&fn->dev,
|
|
"%s: Could not read control registers at 0x%x: %d\n",
|
|
__func__, fn->fd.control_base_addr, error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rmi_f30_report_button(struct rmi_function *fn,
|
|
struct f30_data *f30, unsigned int button)
|
|
{
|
|
unsigned int reg_num = button >> 3;
|
|
unsigned int bit_num = button & 0x07;
|
|
u16 key_code = f30->gpioled_key_map[button];
|
|
bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num));
|
|
|
|
if (f30->trackstick_buttons &&
|
|
button >= TRACKSTICK_RANGE_START &&
|
|
button <= TRACKSTICK_RANGE_END) {
|
|
rmi_f03_overwrite_button(f30->f03, key_code, key_down);
|
|
} else {
|
|
rmi_dbg(RMI_DEBUG_FN, &fn->dev,
|
|
"%s: call input report key (0x%04x) value (0x%02x)",
|
|
__func__, key_code, key_down);
|
|
|
|
input_report_key(f30->input, key_code, key_down);
|
|
}
|
|
}
|
|
|
|
static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
|
|
{
|
|
struct f30_data *f30 = dev_get_drvdata(&fn->dev);
|
|
struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
|
|
int error;
|
|
int i;
|
|
|
|
/* Read the gpi led data. */
|
|
if (drvdata->attn_data.data) {
|
|
if (drvdata->attn_data.size < f30->register_count) {
|
|
dev_warn(&fn->dev,
|
|
"F30 interrupted, but data is missing\n");
|
|
return 0;
|
|
}
|
|
memcpy(f30->data_regs, drvdata->attn_data.data,
|
|
f30->register_count);
|
|
drvdata->attn_data.data += f30->register_count;
|
|
drvdata->attn_data.size -= f30->register_count;
|
|
} else {
|
|
error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
|
|
f30->data_regs, f30->register_count);
|
|
if (error) {
|
|
dev_err(&fn->dev,
|
|
"%s: Failed to read F30 data registers: %d\n",
|
|
__func__, error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
if (f30->has_gpio) {
|
|
for (i = 0; i < f30->gpioled_count; i++)
|
|
if (f30->gpioled_key_map[i] != KEY_RESERVED)
|
|
rmi_f30_report_button(fn, f30, i);
|
|
if (f30->trackstick_buttons)
|
|
rmi_f03_commit_buttons(f30->f03);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_f30_config(struct rmi_function *fn)
|
|
{
|
|
struct f30_data *f30 = dev_get_drvdata(&fn->dev);
|
|
struct rmi_driver *drv = fn->rmi_dev->driver;
|
|
const struct rmi_device_platform_data *pdata =
|
|
rmi_get_platform_data(fn->rmi_dev);
|
|
int error;
|
|
|
|
/* can happen if f30_data.disable is set */
|
|
if (!f30)
|
|
return 0;
|
|
|
|
if (pdata->f30_data.trackstick_buttons) {
|
|
/* Try [re-]establish link to F03. */
|
|
f30->f03 = rmi_find_function(fn->rmi_dev, 0x03);
|
|
f30->trackstick_buttons = f30->f03 != NULL;
|
|
}
|
|
|
|
if (pdata->f30_data.disable) {
|
|
drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
|
|
} else {
|
|
/* Write Control Register values back to device */
|
|
error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
|
|
f30->ctrl_regs, f30->ctrl_regs_size);
|
|
if (error) {
|
|
dev_err(&fn->dev,
|
|
"%s: Could not write control registers at 0x%x: %d\n",
|
|
__func__, fn->fd.control_base_addr, error);
|
|
return error;
|
|
}
|
|
|
|
drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
|
|
int *ctrl_addr, int len, u8 **reg)
|
|
{
|
|
ctrl->address = *ctrl_addr;
|
|
ctrl->length = len;
|
|
ctrl->regs = *reg;
|
|
*ctrl_addr += len;
|
|
*reg += len;
|
|
}
|
|
|
|
static bool rmi_f30_is_valid_button(int button, struct rmi_f30_ctrl_data *ctrl)
|
|
{
|
|
int byte_position = button >> 3;
|
|
int bit_position = button & 0x07;
|
|
|
|
/*
|
|
* ctrl2 -> dir == 0 -> input mode
|
|
* ctrl3 -> data == 1 -> actual button
|
|
*/
|
|
return !(ctrl[2].regs[byte_position] & BIT(bit_position)) &&
|
|
(ctrl[3].regs[byte_position] & BIT(bit_position));
|
|
}
|
|
|
|
static int rmi_f30_map_gpios(struct rmi_function *fn,
|
|
struct f30_data *f30)
|
|
{
|
|
const struct rmi_device_platform_data *pdata =
|
|
rmi_get_platform_data(fn->rmi_dev);
|
|
struct input_dev *input = f30->input;
|
|
unsigned int button = BTN_LEFT;
|
|
unsigned int trackstick_button = BTN_LEFT;
|
|
bool button_mapped = false;
|
|
int i;
|
|
int button_count = min_t(u8, f30->gpioled_count, TRACKSTICK_RANGE_END);
|
|
|
|
f30->gpioled_key_map = devm_kcalloc(&fn->dev,
|
|
button_count,
|
|
sizeof(f30->gpioled_key_map[0]),
|
|
GFP_KERNEL);
|
|
if (!f30->gpioled_key_map) {
|
|
dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < button_count; i++) {
|
|
if (!rmi_f30_is_valid_button(i, f30->ctrl))
|
|
continue;
|
|
|
|
if (pdata->f30_data.trackstick_buttons &&
|
|
i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) {
|
|
f30->gpioled_key_map[i] = trackstick_button++;
|
|
} else if (!pdata->f30_data.buttonpad || !button_mapped) {
|
|
f30->gpioled_key_map[i] = button;
|
|
input_set_capability(input, EV_KEY, button++);
|
|
button_mapped = true;
|
|
}
|
|
}
|
|
|
|
input->keycode = f30->gpioled_key_map;
|
|
input->keycodesize = sizeof(f30->gpioled_key_map[0]);
|
|
input->keycodemax = f30->gpioled_count;
|
|
|
|
/*
|
|
* Buttonpad could be also inferred from f30->has_mech_mouse_btns,
|
|
* but I am not sure, so use only the pdata info and the number of
|
|
* mapped buttons.
|
|
*/
|
|
if (pdata->f30_data.buttonpad || (button - BTN_LEFT == 1))
|
|
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_f30_initialize(struct rmi_function *fn, struct f30_data *f30)
|
|
{
|
|
u8 *ctrl_reg = f30->ctrl_regs;
|
|
int control_address = fn->fd.control_base_addr;
|
|
u8 buf[RMI_F30_QUERY_SIZE];
|
|
int error;
|
|
|
|
error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
|
|
buf, RMI_F30_QUERY_SIZE);
|
|
if (error) {
|
|
dev_err(&fn->dev, "Failed to read query register\n");
|
|
return error;
|
|
}
|
|
|
|
f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
|
|
f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS;
|
|
f30->has_led = buf[0] & RMI_F30_HAS_LED;
|
|
f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO;
|
|
f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC;
|
|
f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL;
|
|
f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
|
|
f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
|
|
|
|
f30->register_count = DIV_ROUND_UP(f30->gpioled_count, 8);
|
|
|
|
if (f30->has_gpio && f30->has_led)
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
|
|
f30->register_count, &ctrl_reg);
|
|
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address,
|
|
sizeof(u8), &ctrl_reg);
|
|
|
|
if (f30->has_gpio) {
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
|
|
f30->register_count, &ctrl_reg);
|
|
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
|
|
f30->register_count, &ctrl_reg);
|
|
}
|
|
|
|
if (f30->has_led) {
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
|
|
f30->register_count, &ctrl_reg);
|
|
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
|
|
f30->has_extended_pattern ? 6 : 2,
|
|
&ctrl_reg);
|
|
}
|
|
|
|
if (f30->has_led || f30->has_gpio_driver_control) {
|
|
/* control 6 uses a byte per gpio/led */
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
|
|
f30->gpioled_count, &ctrl_reg);
|
|
}
|
|
|
|
if (f30->has_mappable_buttons) {
|
|
/* control 7 uses a byte per gpio/led */
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
|
|
f30->gpioled_count, &ctrl_reg);
|
|
}
|
|
|
|
if (f30->has_haptic) {
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
|
|
f30->register_count, &ctrl_reg);
|
|
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
|
|
sizeof(u8), &ctrl_reg);
|
|
}
|
|
|
|
if (f30->has_mech_mouse_btns)
|
|
rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
|
|
sizeof(u8), &ctrl_reg);
|
|
|
|
f30->ctrl_regs_size = ctrl_reg -
|
|
f30->ctrl_regs ?: RMI_F30_CTRL_REGS_MAX_SIZE;
|
|
|
|
error = rmi_f30_read_control_parameters(fn, f30);
|
|
if (error) {
|
|
dev_err(&fn->dev,
|
|
"Failed to initialize F30 control params: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
if (f30->has_gpio) {
|
|
error = rmi_f30_map_gpios(fn, f30);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_f30_probe(struct rmi_function *fn)
|
|
{
|
|
struct rmi_device *rmi_dev = fn->rmi_dev;
|
|
const struct rmi_device_platform_data *pdata =
|
|
rmi_get_platform_data(rmi_dev);
|
|
struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
|
|
struct f30_data *f30;
|
|
int error;
|
|
|
|
if (pdata->f30_data.disable)
|
|
return 0;
|
|
|
|
if (!drv_data->input) {
|
|
dev_info(&fn->dev, "F30: no input device found, ignoring\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
f30 = devm_kzalloc(&fn->dev, sizeof(*f30), GFP_KERNEL);
|
|
if (!f30)
|
|
return -ENOMEM;
|
|
|
|
f30->input = drv_data->input;
|
|
|
|
error = rmi_f30_initialize(fn, f30);
|
|
if (error)
|
|
return error;
|
|
|
|
dev_set_drvdata(&fn->dev, f30);
|
|
return 0;
|
|
}
|
|
|
|
struct rmi_function_handler rmi_f30_handler = {
|
|
.driver = {
|
|
.name = "rmi4_f30",
|
|
},
|
|
.func = 0x30,
|
|
.probe = rmi_f30_probe,
|
|
.config = rmi_f30_config,
|
|
.attention = rmi_f30_attention,
|
|
};
|