258 строки
6.6 KiB
C
258 строки
6.6 KiB
C
/*
|
|
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include "phy-qcom-ufs-qmp-20nm.h"
|
|
|
|
#define UFS_PHY_NAME "ufs_phy_qmp_20nm"
|
|
|
|
static
|
|
int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
|
|
bool is_rate_B)
|
|
{
|
|
struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
|
|
int tbl_size_A, tbl_size_B;
|
|
u8 major = ufs_qcom_phy->host_ctrl_rev_major;
|
|
u16 minor = ufs_qcom_phy->host_ctrl_rev_minor;
|
|
u16 step = ufs_qcom_phy->host_ctrl_rev_step;
|
|
int err;
|
|
|
|
if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) {
|
|
tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0);
|
|
tbl_A = phy_cal_table_rate_A_1_2_0;
|
|
} else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) {
|
|
tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0);
|
|
tbl_A = phy_cal_table_rate_A_1_3_0;
|
|
} else {
|
|
dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n",
|
|
__func__);
|
|
err = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
|
|
tbl_B = phy_cal_table_rate_B;
|
|
|
|
err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
|
|
tbl_B, tbl_size_B, is_rate_B);
|
|
|
|
if (err)
|
|
dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n",
|
|
__func__, err);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static
|
|
void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
|
|
{
|
|
phy_common->quirks =
|
|
UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
|
|
}
|
|
|
|
static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
|
|
{
|
|
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
|
|
bool is_rate_B = false;
|
|
int ret;
|
|
|
|
if (phy_common->mode == PHY_MODE_UFS_HS_B)
|
|
is_rate_B = true;
|
|
|
|
ret = ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
|
|
if (!ret)
|
|
/* phy calibrated, but yet to be started */
|
|
phy_common->is_started = false;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
|
|
{
|
|
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
|
|
|
|
phy_common->mode = PHY_MODE_INVALID;
|
|
|
|
if (mode > 0)
|
|
phy_common->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
|
|
{
|
|
bool hibern8_exit_after_pwr_collapse = phy->quirks &
|
|
UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
|
|
|
|
if (val) {
|
|
writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
|
|
/*
|
|
* Before any transactions involving PHY, ensure PHY knows
|
|
* that it's analog rail is powered ON.
|
|
*/
|
|
mb();
|
|
|
|
if (hibern8_exit_after_pwr_collapse) {
|
|
/*
|
|
* Give atleast 1us delay after restoring PHY analog
|
|
* power.
|
|
*/
|
|
usleep_range(1, 2);
|
|
writel_relaxed(0x0A, phy->mmio +
|
|
QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
|
|
writel_relaxed(0x08, phy->mmio +
|
|
QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
|
|
/*
|
|
* Make sure workaround is deactivated before proceeding
|
|
* with normal PHY operations.
|
|
*/
|
|
mb();
|
|
}
|
|
} else {
|
|
if (hibern8_exit_after_pwr_collapse) {
|
|
writel_relaxed(0x0A, phy->mmio +
|
|
QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
|
|
writel_relaxed(0x02, phy->mmio +
|
|
QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
|
|
/*
|
|
* Make sure that above workaround is activated before
|
|
* PHY analog power collapse.
|
|
*/
|
|
mb();
|
|
}
|
|
|
|
writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
|
|
/*
|
|
* ensure that PHY knows its PHY analog rail is going
|
|
* to be powered down
|
|
*/
|
|
mb();
|
|
}
|
|
}
|
|
|
|
static
|
|
void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
|
|
{
|
|
writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
|
|
phy->mmio + UFS_PHY_TX_LANE_ENABLE);
|
|
mb();
|
|
}
|
|
|
|
static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
|
|
tmp &= ~MASK_SERDES_START;
|
|
tmp |= (1 << OFFSET_SERDES_START);
|
|
writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
|
|
mb();
|
|
}
|
|
|
|
static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
|
|
{
|
|
int err = 0;
|
|
u32 val;
|
|
|
|
err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
|
|
val, (val & MASK_PCS_READY), 10, 1000000);
|
|
if (err)
|
|
dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
|
|
__func__, err);
|
|
return err;
|
|
}
|
|
|
|
static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
|
|
.init = ufs_qcom_phy_qmp_20nm_init,
|
|
.exit = ufs_qcom_phy_qmp_20nm_exit,
|
|
.power_on = ufs_qcom_phy_power_on,
|
|
.power_off = ufs_qcom_phy_power_off,
|
|
.set_mode = ufs_qcom_phy_qmp_20nm_set_mode,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
|
|
.start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
|
|
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
|
|
.set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
|
|
.power_control = ufs_qcom_phy_qmp_20nm_power_control,
|
|
};
|
|
|
|
static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct phy *generic_phy;
|
|
struct ufs_qcom_phy_qmp_20nm *phy;
|
|
struct ufs_qcom_phy *phy_common;
|
|
int err = 0;
|
|
|
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy) {
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
phy_common = &phy->common_cfg;
|
|
|
|
generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common,
|
|
&ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
|
|
|
|
if (!generic_phy) {
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
err = ufs_qcom_phy_init_clks(phy_common);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = ufs_qcom_phy_init_vregulators(phy_common);
|
|
if (err)
|
|
goto out;
|
|
|
|
ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
|
|
|
|
phy_set_drvdata(generic_phy, phy);
|
|
|
|
strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name));
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = {
|
|
{.compatible = "qcom,ufs-phy-qmp-20nm"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match);
|
|
|
|
static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = {
|
|
.probe = ufs_qcom_phy_qmp_20nm_probe,
|
|
.driver = {
|
|
.of_match_table = ufs_qcom_phy_qmp_20nm_of_match,
|
|
.name = "ufs_qcom_phy_qmp_20nm",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(ufs_qcom_phy_qmp_20nm_driver);
|
|
|
|
MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm");
|
|
MODULE_LICENSE("GPL v2");
|