576 строки
14 KiB
C
576 строки
14 KiB
C
/*
|
|
* pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
|
|
*
|
|
* (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
|
|
*
|
|
* Per Atp867 data sheet rev 1.2, Acard.
|
|
* Based in part on early ide code from
|
|
* 2003-2004 by Eric Uhrhane, Google, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*
|
|
* TODO:
|
|
* 1. RAID features [comparison, XOR, striping, mirroring, etc.]
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gfp.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_atp867x"
|
|
#define DRV_VERSION "0.7.5"
|
|
|
|
/*
|
|
* IO Registers
|
|
* Note that all runtime hot priv ports are cached in ap private_data
|
|
*/
|
|
|
|
enum {
|
|
ATP867X_IO_CHANNEL_OFFSET = 0x10,
|
|
|
|
/*
|
|
* IO Register Bitfields
|
|
*/
|
|
|
|
ATP867X_IO_PIOSPD_ACTIVE_SHIFT = 4,
|
|
ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
|
|
|
|
ATP867X_IO_DMAMODE_MSTR_SHIFT = 0,
|
|
ATP867X_IO_DMAMODE_MSTR_MASK = 0x07,
|
|
ATP867X_IO_DMAMODE_SLAVE_SHIFT = 4,
|
|
ATP867X_IO_DMAMODE_SLAVE_MASK = 0x70,
|
|
|
|
ATP867X_IO_DMAMODE_UDMA_6 = 0x07,
|
|
ATP867X_IO_DMAMODE_UDMA_5 = 0x06,
|
|
ATP867X_IO_DMAMODE_UDMA_4 = 0x05,
|
|
ATP867X_IO_DMAMODE_UDMA_3 = 0x04,
|
|
ATP867X_IO_DMAMODE_UDMA_2 = 0x03,
|
|
ATP867X_IO_DMAMODE_UDMA_1 = 0x02,
|
|
ATP867X_IO_DMAMODE_UDMA_0 = 0x01,
|
|
ATP867X_IO_DMAMODE_DISABLE = 0x00,
|
|
|
|
ATP867X_IO_SYS_INFO_66MHZ = 0x04,
|
|
ATP867X_IO_SYS_INFO_SLOW_UDMA5 = 0x02,
|
|
ATP867X_IO_SYS_MASK_RESERVED = (~0xf1),
|
|
|
|
ATP867X_IO_PORTSPD_VAL = 0x1143,
|
|
ATP867X_PREREAD_VAL = 0x0200,
|
|
|
|
ATP867X_NUM_PORTS = 4,
|
|
ATP867X_BAR_IOBASE = 0,
|
|
ATP867X_BAR_ROMBASE = 6,
|
|
};
|
|
|
|
#define ATP867X_IOBASE(ap) ((ap)->host->iomap[0])
|
|
#define ATP867X_SYS_INFO(ap) (0x3F + ATP867X_IOBASE(ap))
|
|
|
|
#define ATP867X_IO_PORTBASE(ap, port) (0x00 + ATP867X_IOBASE(ap) + \
|
|
(port) * ATP867X_IO_CHANNEL_OFFSET)
|
|
#define ATP867X_IO_DMABASE(ap, port) (0x40 + \
|
|
ATP867X_IO_PORTBASE((ap), (port)))
|
|
|
|
#define ATP867X_IO_STATUS(ap, port) (0x07 + \
|
|
ATP867X_IO_PORTBASE((ap), (port)))
|
|
#define ATP867X_IO_ALTSTATUS(ap, port) (0x0E + \
|
|
ATP867X_IO_PORTBASE((ap), (port)))
|
|
|
|
/*
|
|
* hot priv ports
|
|
*/
|
|
#define ATP867X_IO_MSTRPIOSPD(ap, port) (0x08 + \
|
|
ATP867X_IO_DMABASE((ap), (port)))
|
|
#define ATP867X_IO_SLAVPIOSPD(ap, port) (0x09 + \
|
|
ATP867X_IO_DMABASE((ap), (port)))
|
|
#define ATP867X_IO_8BPIOSPD(ap, port) (0x0A + \
|
|
ATP867X_IO_DMABASE((ap), (port)))
|
|
#define ATP867X_IO_DMAMODE(ap, port) (0x0B + \
|
|
ATP867X_IO_DMABASE((ap), (port)))
|
|
|
|
#define ATP867X_IO_PORTSPD(ap, port) (0x4A + \
|
|
ATP867X_IO_PORTBASE((ap), (port)))
|
|
#define ATP867X_IO_PREREAD(ap, port) (0x4C + \
|
|
ATP867X_IO_PORTBASE((ap), (port)))
|
|
|
|
struct atp867x_priv {
|
|
void __iomem *dma_mode;
|
|
void __iomem *mstr_piospd;
|
|
void __iomem *slave_piospd;
|
|
void __iomem *eightb_piospd;
|
|
int pci66mhz;
|
|
};
|
|
|
|
static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct atp867x_priv *dp = ap->private_data;
|
|
u8 speed = adev->dma_mode;
|
|
u8 b;
|
|
u8 mode = speed - XFER_UDMA_0 + 1;
|
|
|
|
/*
|
|
* Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
|
|
* on 66MHz bus
|
|
* rev-A: UDMA_1~4 (5, 6 no change)
|
|
* rev-B: all UDMA modes
|
|
* UDMA_0 stays not to disable UDMA
|
|
*/
|
|
if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0 &&
|
|
(pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
|
|
mode < ATP867X_IO_DMAMODE_UDMA_5))
|
|
mode--;
|
|
|
|
b = ioread8(dp->dma_mode);
|
|
if (adev->devno & 1) {
|
|
b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
|
|
(mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
|
|
} else {
|
|
b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
|
|
(mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
|
|
}
|
|
iowrite8(b, dp->dma_mode);
|
|
}
|
|
|
|
static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
|
|
unsigned int clk)
|
|
{
|
|
struct atp867x_priv *dp = ap->private_data;
|
|
unsigned char clocks = clk;
|
|
|
|
/*
|
|
* Doc 6.6.9: increase the clock value by 1 for safer PIO speed
|
|
* on 66MHz bus
|
|
*/
|
|
if (dp->pci66mhz)
|
|
clocks++;
|
|
|
|
switch (clocks) {
|
|
case 0:
|
|
clocks = 1;
|
|
break;
|
|
case 1 ... 6:
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
|
|
"Using 12clk.\n", clk);
|
|
/* fall through */
|
|
case 9 ... 12:
|
|
clocks = 7; /* 12 clk */
|
|
break;
|
|
case 7:
|
|
case 8: /* default 8 clk */
|
|
clocks = 0;
|
|
goto active_clock_shift_done;
|
|
}
|
|
|
|
active_clock_shift_done:
|
|
return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
|
|
}
|
|
|
|
static int atp867x_get_recover_clocks_shifted(unsigned int clk)
|
|
{
|
|
unsigned char clocks = clk;
|
|
|
|
switch (clocks) {
|
|
case 0:
|
|
clocks = 1;
|
|
break;
|
|
case 1 ... 11:
|
|
break;
|
|
case 13:
|
|
case 14:
|
|
--clocks; /* by the spec */
|
|
break;
|
|
case 15:
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
|
|
"Using default 12clk.\n", clk);
|
|
/* fall through */
|
|
case 12: /* default 12 clk */
|
|
clocks = 0;
|
|
break;
|
|
}
|
|
|
|
return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
|
|
}
|
|
|
|
static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct ata_device *peer = ata_dev_pair(adev);
|
|
struct atp867x_priv *dp = ap->private_data;
|
|
u8 speed = adev->pio_mode;
|
|
struct ata_timing t, p;
|
|
int T, UT;
|
|
u8 b;
|
|
|
|
T = 1000000000 / 33333;
|
|
UT = T / 4;
|
|
|
|
ata_timing_compute(adev, speed, &t, T, UT);
|
|
if (peer && peer->pio_mode) {
|
|
ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
|
|
ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
|
|
}
|
|
|
|
b = ioread8(dp->dma_mode);
|
|
if (adev->devno & 1)
|
|
b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
|
|
else
|
|
b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
|
|
iowrite8(b, dp->dma_mode);
|
|
|
|
b = atp867x_get_active_clocks_shifted(ap, t.active) |
|
|
atp867x_get_recover_clocks_shifted(t.recover);
|
|
|
|
if (adev->devno & 1)
|
|
iowrite8(b, dp->slave_piospd);
|
|
else
|
|
iowrite8(b, dp->mstr_piospd);
|
|
|
|
b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
|
|
atp867x_get_recover_clocks_shifted(t.rec8b);
|
|
|
|
iowrite8(b, dp->eightb_piospd);
|
|
}
|
|
|
|
static int atp867x_cable_override(struct pci_dev *pdev)
|
|
{
|
|
if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
|
|
(pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
|
|
pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int atp867x_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
|
|
if (atp867x_cable_override(pdev))
|
|
return ATA_CBL_PATA40_SHORT;
|
|
|
|
return ATA_CBL_PATA_UNK;
|
|
}
|
|
|
|
static struct scsi_host_template atp867x_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations atp867x_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.cable_detect = atp867x_cable_detect,
|
|
.set_piomode = atp867x_set_piomode,
|
|
.set_dmamode = atp867x_set_dmamode,
|
|
};
|
|
|
|
|
|
#ifdef ATP867X_DEBUG
|
|
static void atp867x_check_res(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
unsigned long start, len;
|
|
|
|
/* Check the PCI resources for this channel are enabled */
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
|
start = pci_resource_start(pdev, i);
|
|
len = pci_resource_len(pdev, i);
|
|
printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n",
|
|
start, len);
|
|
}
|
|
}
|
|
|
|
static void atp867x_check_ports(struct ata_port *ap, int port)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
struct atp867x_priv *dp = ap->private_data;
|
|
|
|
printk(KERN_DEBUG "ATP867X: port[%d] addresses\n"
|
|
" cmd_addr =0x%llx, 0x%llx\n"
|
|
" ctl_addr =0x%llx, 0x%llx\n"
|
|
" bmdma_addr =0x%llx, 0x%llx\n"
|
|
" data_addr =0x%llx\n"
|
|
" error_addr =0x%llx\n"
|
|
" feature_addr =0x%llx\n"
|
|
" nsect_addr =0x%llx\n"
|
|
" lbal_addr =0x%llx\n"
|
|
" lbam_addr =0x%llx\n"
|
|
" lbah_addr =0x%llx\n"
|
|
" device_addr =0x%llx\n"
|
|
" status_addr =0x%llx\n"
|
|
" command_addr =0x%llx\n"
|
|
" dp->dma_mode =0x%llx\n"
|
|
" dp->mstr_piospd =0x%llx\n"
|
|
" dp->slave_piospd =0x%llx\n"
|
|
" dp->eightb_piospd =0x%llx\n"
|
|
" dp->pci66mhz =0x%lx\n",
|
|
port,
|
|
(unsigned long long)ioaddr->cmd_addr,
|
|
(unsigned long long)ATP867X_IO_PORTBASE(ap, port),
|
|
(unsigned long long)ioaddr->ctl_addr,
|
|
(unsigned long long)ATP867X_IO_ALTSTATUS(ap, port),
|
|
(unsigned long long)ioaddr->bmdma_addr,
|
|
(unsigned long long)ATP867X_IO_DMABASE(ap, port),
|
|
(unsigned long long)ioaddr->data_addr,
|
|
(unsigned long long)ioaddr->error_addr,
|
|
(unsigned long long)ioaddr->feature_addr,
|
|
(unsigned long long)ioaddr->nsect_addr,
|
|
(unsigned long long)ioaddr->lbal_addr,
|
|
(unsigned long long)ioaddr->lbam_addr,
|
|
(unsigned long long)ioaddr->lbah_addr,
|
|
(unsigned long long)ioaddr->device_addr,
|
|
(unsigned long long)ioaddr->status_addr,
|
|
(unsigned long long)ioaddr->command_addr,
|
|
(unsigned long long)dp->dma_mode,
|
|
(unsigned long long)dp->mstr_piospd,
|
|
(unsigned long long)dp->slave_piospd,
|
|
(unsigned long long)dp->eightb_piospd,
|
|
(unsigned long)dp->pci66mhz);
|
|
}
|
|
#endif
|
|
|
|
static int atp867x_set_priv(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct atp867x_priv *dp;
|
|
int port = ap->port_no;
|
|
|
|
dp = ap->private_data =
|
|
devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
|
|
if (dp == NULL)
|
|
return -ENOMEM;
|
|
|
|
dp->dma_mode = ATP867X_IO_DMAMODE(ap, port);
|
|
dp->mstr_piospd = ATP867X_IO_MSTRPIOSPD(ap, port);
|
|
dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port);
|
|
dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port);
|
|
|
|
dp->pci66mhz =
|
|
ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atp867x_fixup(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
struct ata_port *ap = host->ports[0];
|
|
int i;
|
|
u8 v;
|
|
|
|
/*
|
|
* Broken BIOS might not set latency high enough
|
|
*/
|
|
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v);
|
|
if (v < 0x80) {
|
|
v = 0x80;
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v);
|
|
printk(KERN_DEBUG "ATP867X: set latency timer of device %s"
|
|
" to %d\n", pci_name(pdev), v);
|
|
}
|
|
|
|
/*
|
|
* init 8bit io ports speed(0aaarrrr) to 43h and
|
|
* init udma modes of master/slave to 0/0(11h)
|
|
*/
|
|
for (i = 0; i < ATP867X_NUM_PORTS; i++)
|
|
iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i));
|
|
|
|
/*
|
|
* init PreREAD counts
|
|
*/
|
|
for (i = 0; i < ATP867X_NUM_PORTS; i++)
|
|
iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i));
|
|
|
|
v = ioread8(ATP867X_IOBASE(ap) + 0x28);
|
|
v &= 0xcf; /* Enable INTA#: bit4=0 means enable */
|
|
v |= 0xc0; /* Enable PCI burst, MRM & not immediate interrupts */
|
|
iowrite8(v, ATP867X_IOBASE(ap) + 0x28);
|
|
|
|
/*
|
|
* Turn off the over clocked udma5 mode, only for Rev-B
|
|
*/
|
|
v = ioread8(ATP867X_SYS_INFO(ap));
|
|
v &= ATP867X_IO_SYS_MASK_RESERVED;
|
|
if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B)
|
|
v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5;
|
|
iowrite8(v, ATP867X_SYS_INFO(ap));
|
|
}
|
|
|
|
static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
|
|
{
|
|
struct device *gdev = host->dev;
|
|
struct pci_dev *pdev = to_pci_dev(gdev);
|
|
unsigned int mask = 0;
|
|
int i, rc;
|
|
|
|
/*
|
|
* do not map rombase
|
|
*/
|
|
rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
#ifdef ATP867X_DEBUG
|
|
atp867x_check_res(pdev);
|
|
|
|
for (i = 0; i < PCI_ROM_RESOURCE; i++)
|
|
printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i,
|
|
(unsigned long long)(host->iomap[i]));
|
|
#endif
|
|
|
|
/*
|
|
* request, iomap BARs and init port addresses accordingly
|
|
*/
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i);
|
|
ioaddr->ctl_addr = ioaddr->altstatus_addr
|
|
= ATP867X_IO_ALTSTATUS(ap, i);
|
|
ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i);
|
|
|
|
ata_sff_std_ports(ioaddr);
|
|
rc = atp867x_set_priv(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
#ifdef ATP867X_DEBUG
|
|
atp867x_check_ports(ap, i);
|
|
#endif
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
|
|
(unsigned long)ioaddr->cmd_addr,
|
|
(unsigned long)ioaddr->ctl_addr);
|
|
ata_port_desc(ap, "bmdma 0x%lx",
|
|
(unsigned long)ioaddr->bmdma_addr);
|
|
|
|
mask |= 1 << i;
|
|
}
|
|
|
|
if (!mask) {
|
|
dev_err(gdev, "no available native port\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
atp867x_fixup(host);
|
|
|
|
rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
|
|
return rc;
|
|
}
|
|
|
|
static int atp867x_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info_867x = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &atp867x_ops,
|
|
};
|
|
|
|
struct ata_host *host;
|
|
const struct ata_port_info *ppi[] = { &info_867x, NULL };
|
|
int rc;
|
|
|
|
ata_print_version_once(&pdev->dev, DRV_VERSION);
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)",
|
|
pdev->device);
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
|
|
if (!host) {
|
|
dev_err(&pdev->dev, "failed to allocate ATA host\n");
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = atp867x_ata_pci_sff_init_host(host);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed to init host\n");
|
|
goto err_out;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
|
|
IRQF_SHARED, &atp867x_sht);
|
|
if (rc)
|
|
dev_err(&pdev->dev, "failed to activate host\n");
|
|
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int atp867x_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
atp867x_fixup(host);
|
|
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct pci_device_id atp867x_pci_tbl[] = {
|
|
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 },
|
|
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver atp867x_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = atp867x_pci_tbl,
|
|
.probe = atp867x_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = atp867x_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(atp867x_driver);
|
|
|
|
MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc.");
|
|
MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|