247 строки
6.4 KiB
C
247 строки
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Watchdog driver for Broadcom BCM2835
|
|
*
|
|
* "bcm2708_wdog" driver written by Luke Diamand that was obtained from
|
|
* branch "rpi-3.6.y" of git://github.com/raspberrypi/linux.git was used
|
|
* as a hardware reference for the Broadcom BCM2835 watchdog timer.
|
|
*
|
|
* Copyright (C) 2013 Lubomir Rintel <lkundrak@v3.sk>
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mfd/bcm2835-pm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/io.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#define PM_RSTC 0x1c
|
|
#define PM_RSTS 0x20
|
|
#define PM_WDOG 0x24
|
|
|
|
#define PM_PASSWORD 0x5a000000
|
|
|
|
#define PM_WDOG_TIME_SET 0x000fffff
|
|
#define PM_RSTC_WRCFG_CLR 0xffffffcf
|
|
#define PM_RSTS_HADWRH_SET 0x00000040
|
|
#define PM_RSTC_WRCFG_SET 0x00000030
|
|
#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
|
|
#define PM_RSTC_RESET 0x00000102
|
|
|
|
/*
|
|
* The Raspberry Pi firmware uses the RSTS register to know which partition
|
|
* to boot from. The partition value is spread into bits 0, 2, 4, 6, 8, 10.
|
|
* Partition 63 is a special partition used by the firmware to indicate halt.
|
|
*/
|
|
#define PM_RSTS_RASPBERRYPI_HALT 0x555
|
|
|
|
#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
|
|
#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
|
|
|
|
struct bcm2835_wdt {
|
|
void __iomem *base;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static struct bcm2835_wdt *bcm2835_power_off_wdt;
|
|
|
|
static unsigned int heartbeat;
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
|
|
static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt)
|
|
{
|
|
uint32_t cur;
|
|
|
|
cur = readl(wdt->base + PM_RSTC);
|
|
|
|
return !!(cur & PM_RSTC_WRCFG_FULL_RESET);
|
|
}
|
|
|
|
static int bcm2835_wdt_start(struct watchdog_device *wdog)
|
|
{
|
|
struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
|
|
uint32_t cur;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&wdt->lock, flags);
|
|
|
|
writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) &
|
|
PM_WDOG_TIME_SET), wdt->base + PM_WDOG);
|
|
cur = readl_relaxed(wdt->base + PM_RSTC);
|
|
writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
|
|
PM_RSTC_WRCFG_FULL_RESET, wdt->base + PM_RSTC);
|
|
|
|
spin_unlock_irqrestore(&wdt->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_wdt_stop(struct watchdog_device *wdog)
|
|
{
|
|
struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
|
|
|
|
writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog)
|
|
{
|
|
struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
|
|
|
|
uint32_t ret = readl_relaxed(wdt->base + PM_WDOG);
|
|
return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET);
|
|
}
|
|
|
|
static void __bcm2835_restart(struct bcm2835_wdt *wdt)
|
|
{
|
|
u32 val;
|
|
|
|
/* use a timeout of 10 ticks (~150us) */
|
|
writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG);
|
|
val = readl_relaxed(wdt->base + PM_RSTC);
|
|
val &= PM_RSTC_WRCFG_CLR;
|
|
val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
|
|
writel_relaxed(val, wdt->base + PM_RSTC);
|
|
|
|
/* No sleeping, possibly atomic. */
|
|
mdelay(1);
|
|
}
|
|
|
|
static int bcm2835_restart(struct watchdog_device *wdog,
|
|
unsigned long action, void *data)
|
|
{
|
|
struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
|
|
|
|
__bcm2835_restart(wdt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_ops bcm2835_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = bcm2835_wdt_start,
|
|
.stop = bcm2835_wdt_stop,
|
|
.get_timeleft = bcm2835_wdt_get_timeleft,
|
|
.restart = bcm2835_restart,
|
|
};
|
|
|
|
static const struct watchdog_info bcm2835_wdt_info = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
|
|
WDIOF_KEEPALIVEPING,
|
|
.identity = "Broadcom BCM2835 Watchdog timer",
|
|
};
|
|
|
|
static struct watchdog_device bcm2835_wdt_wdd = {
|
|
.info = &bcm2835_wdt_info,
|
|
.ops = &bcm2835_wdt_ops,
|
|
.min_timeout = 1,
|
|
.max_timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
|
|
.timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
|
|
};
|
|
|
|
/*
|
|
* We can't really power off, but if we do the normal reset scheme, and
|
|
* indicate to bootcode.bin not to reboot, then most of the chip will be
|
|
* powered off.
|
|
*/
|
|
static void bcm2835_power_off(void)
|
|
{
|
|
struct bcm2835_wdt *wdt = bcm2835_power_off_wdt;
|
|
u32 val;
|
|
|
|
/*
|
|
* We set the watchdog hard reset bit here to distinguish this reset
|
|
* from the normal (full) reset. bootcode.bin will not reboot after a
|
|
* hard reset.
|
|
*/
|
|
val = readl_relaxed(wdt->base + PM_RSTS);
|
|
val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
|
|
writel_relaxed(val, wdt->base + PM_RSTS);
|
|
|
|
/* Continue with normal reset mechanism */
|
|
__bcm2835_restart(wdt);
|
|
}
|
|
|
|
static int bcm2835_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent);
|
|
struct device *dev = &pdev->dev;
|
|
struct bcm2835_wdt *wdt;
|
|
int err;
|
|
|
|
wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, wdt);
|
|
|
|
spin_lock_init(&wdt->lock);
|
|
|
|
wdt->base = pm->base;
|
|
|
|
watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt);
|
|
watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
|
|
watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
|
|
bcm2835_wdt_wdd.parent = dev;
|
|
if (bcm2835_wdt_is_running(wdt)) {
|
|
/*
|
|
* The currently active timeout value (set by the
|
|
* bootloader) may be different from the module
|
|
* heartbeat parameter or the value in device
|
|
* tree. But we just need to set WDOG_HW_RUNNING,
|
|
* because then the framework will "immediately" ping
|
|
* the device, updating the timeout.
|
|
*/
|
|
set_bit(WDOG_HW_RUNNING, &bcm2835_wdt_wdd.status);
|
|
}
|
|
|
|
watchdog_set_restart_priority(&bcm2835_wdt_wdd, 128);
|
|
|
|
watchdog_stop_on_reboot(&bcm2835_wdt_wdd);
|
|
err = devm_watchdog_register_device(dev, &bcm2835_wdt_wdd);
|
|
if (err) {
|
|
dev_err(dev, "Failed to register watchdog device");
|
|
return err;
|
|
}
|
|
|
|
if (pm_power_off == NULL) {
|
|
pm_power_off = bcm2835_power_off;
|
|
bcm2835_power_off_wdt = wdt;
|
|
}
|
|
|
|
dev_info(dev, "Broadcom BCM2835 watchdog timer");
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
if (pm_power_off == bcm2835_power_off)
|
|
pm_power_off = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver bcm2835_wdt_driver = {
|
|
.probe = bcm2835_wdt_probe,
|
|
.remove = bcm2835_wdt_remove,
|
|
.driver = {
|
|
.name = "bcm2835-wdt",
|
|
},
|
|
};
|
|
module_platform_driver(bcm2835_wdt_driver);
|
|
|
|
module_param(heartbeat, uint, 0);
|
|
MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
|
|
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
|
|
MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer");
|
|
MODULE_LICENSE("GPL");
|