Horatiu Vultur e9945b2633 pinctrl: ocelot: Fix incorrect trigger of the interrupt. ... The interrupt controller can detect only link changes. So in case an external device generated a level based interrupt, then the interrupt controller detected correctly the first edge. But the problem was that the interrupt controller was detecting also the edge when the interrupt was cleared. So it would generate another interrupt. The fix for this is to clear the second interrupt but still check the interrupt line status. Fixes: c297561bc9 ("pinctrl: ocelot: Fix interrupt controller") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20221018070959.1322606-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>		2022-10-18 10:42:10 +02:00
..
actions	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
aspeed	pinctrl: aspeed: Force to disable the function's signal	2022-08-31 14:14:31 +02:00
bcm	These are the pin control changes for the v6.1 kernel cycle:	2022-10-11 10:59:59 -07:00
berlin	pinctrl: berlin: fix spelling typo in comment	2022-09-05 14:10:14 +02:00
cirrus	pinctrl: Propagate firmware node from a parent device	2021-12-22 03:09:56 +01:00
freescale	pinctrl: imx8m: kconfig: Fix build error on test compile	2022-09-08 10:06:57 +02:00
intel	Pin control bulk changes for v6.0:	2022-08-10 11:01:44 -07:00
mediatek	pinctrl: mediatek: add mt8188 driver	2022-08-25 14:50:44 +02:00
meson	pinctrl: meson: Switch to use fwnode instead of of_node	2022-09-08 10:35:30 +02:00
mvebu	pinctrl: armada-37xx: Remove unused macro PIN_GRP()	2022-08-22 10:46:25 +02:00
nomadik	pinctrl: nomadik: remove dead code after DB8540 pinctrl removal	2022-09-19 09:35:57 +02:00
nuvoton	pinctrl: wpcm450: Correct the fwnode_irq_get() return value check	2022-10-04 09:40:57 +02:00
pxa	drivers/pinctrl: remove redundant ret variable	2022-01-24 01:12:54 +01:00
qcom	pinctrl: qcom: Avoid glitching lines when we first mux to output	2022-10-17 12:28:26 +02:00
ralink	pinctrl: ralink: Check for null return of devm_kcalloc	2022-07-11 14:40:17 +02:00
renesas	Pin control bulk changes for v6.0:	2022-08-10 11:01:44 -07:00
samsung	pinctrl: samsung: Finish initializing the gpios before registering them	2022-08-16 12:23:30 +03:00
spear	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
sprd	…
starfive	pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"	2022-10-04 10:47:48 +02:00
stm32	pinctrl: stm32: Switch to use dev_err_probe() helper	2022-09-20 11:16:42 +02:00
sunplus	pinctrl: sunplus: Add check for kcalloc	2022-07-11 15:04:19 +02:00
sunxi	These are the pin control changes for the v6.1 kernel cycle:	2022-10-11 10:59:59 -07:00
tegra	pinctrl: tegra: tegra194: drop unused pin groups	2022-05-04 23:40:05 +02:00
ti	…
uniphier	pinctrl: uniphier: Add USB device pinmux settings	2022-02-11 01:37:21 +01:00
visconti	…
vt8500	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
Kconfig	These are the pin control changes for the v6.1 kernel cycle:	2022-10-11 10:59:59 -07:00
Makefile	pinctrl: Create subdirectory for StarFive drivers	2022-10-04 10:42:11 +02:00
core.c	pinctrl: core: Use device_match_of_node() helper	2022-07-18 11:38:37 +02:00
core.h	…
devicetree.c	pinctrl: devicetree: Delete usage of driver_deferred_probe_check_state()	2022-06-10 15:57:54 +02:00
devicetree.h	…
pinconf-generic.c	pinctrl: pinconf-generic: Print arguments for bias-pull-*	2022-03-15 01:24:15 +01:00
pinconf.c	…
pinconf.h	…
pinctrl-amd.c	Interrupt subsystem updates:	2022-10-12 10:23:24 -07:00
pinctrl-amd.h	pinctrl: amd: Implement pinmux functionality	2022-06-15 15:54:20 +02:00
pinctrl-apple-gpio.c	pinctrl: apple: Use a raw spinlock for the regmap	2022-05-25 09:37:44 +02:00
pinctrl-artpec6.c	…
pinctrl-as3722.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE	2022-06-10 14:51:36 +02:00
pinctrl-at91-pio4.c	pinctrl: at91-pio4: remove #ifdef CONFIG_PM_SLEEP	2022-07-18 11:38:36 +02:00
pinctrl-at91.c	pinctrl: at91: use dev_dbg() instead of printk()	2022-09-03 00:19:23 +02:00
pinctrl-at91.h	…
pinctrl-axp209.c	pinctrl: axp209: Support the AXP221/AXP223/AXP809 variant	2022-06-30 14:05:57 +02:00
pinctrl-bm1880.c	…
pinctrl-cy8c95x0.c	pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops	2022-09-20 11:22:12 +02:00
pinctrl-da850-pupd.c	…
pinctrl-da9062.c	pinctrl: Propagate firmware node from a parent device	2021-12-22 03:09:56 +01:00
pinctrl-digicolor.c	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
pinctrl-equilibrium.c	pinctrl: equilibrium: Switch to use fwnode instead of of_node	2022-05-09 13:46:51 +02:00
pinctrl-equilibrium.h	pinctrl: equilibrium: Switch to use fwnode instead of of_node	2022-05-09 13:46:51 +02:00
pinctrl-falcon.c	…
pinctrl-gemini.c	pinctrl: gemini: fix typos	2021-10-14 01:22:58 +02:00
pinctrl-ingenic.c	pinctrl: Ingenic: JZ4755 bug fixes	2022-10-17 11:47:38 +02:00
pinctrl-k210.c	pinctrl: k210: Fix bias-pull-up	2022-02-11 02:19:47 +01:00
pinctrl-keembay.c	pinctrl: keembay: rework loops looking for groups names	2021-12-22 02:57:27 +01:00
pinctrl-lantiq.c	…
pinctrl-lantiq.h	…
pinctrl-lpc18xx.c	…
pinctrl-max77620.c	pinctrl: max77620: drop unneeded MODULE_ALIAS	2022-04-22 22:56:46 +02:00
pinctrl-mcp23s08.c	pinctrl: mcp23s08: Drop assignment of default number of OF cells	2022-09-03 00:17:35 +02:00
pinctrl-mcp23s08.h	pinctrl: mcp23s08: Add optional reset GPIO	2021-06-12 01:58:10 +02:00
pinctrl-mcp23s08_i2c.c	…
pinctrl-mcp23s08_spi.c	…
pinctrl-microchip-sgpio.c	These are the pin control changes for the v6.1 kernel cycle:	2022-10-11 10:59:59 -07:00
pinctrl-ocelot.c	pinctrl: ocelot: Fix incorrect trigger of the interrupt.	2022-10-18 10:42:10 +02:00
pinctrl-oxnas.c	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
pinctrl-palmas.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE	2022-06-10 14:51:36 +02:00
pinctrl-pic32.c	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
pinctrl-pic32.h	…
pinctrl-pistachio.c	pinctrl: pistachio: Correct the fwnode_irq_get() return value check	2022-09-08 15:18:58 +02:00
pinctrl-rk805.c	pinctrl: Propagate firmware node from a parent device	2021-12-22 03:09:56 +01:00
pinctrl-rockchip.c	pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback	2022-10-04 09:20:41 +02:00
pinctrl-rockchip.h	pinctrl: rockchip: Add RV1126 pinctrl support	2022-08-22 09:51:08 +02:00
pinctrl-single.c	This is the bulk of pin control changes for the v5.15 kernel cycle,	2021-09-02 14:22:56 -07:00
pinctrl-st.c	pinctrl: st: stop abusing of_get_named_gpio()	2022-10-04 09:58:17 +02:00
pinctrl-stmfx.c	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
pinctrl-sx150x.c	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
pinctrl-tb10x.c	…
pinctrl-thunderbay.c	pinctrl: thunderbay: Use devm_platform_ioremap_resource()	2022-04-23 00:01:55 +02:00
pinctrl-utils.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE	2022-06-10 14:51:36 +02:00
pinctrl-utils.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE	2022-06-10 14:51:36 +02:00
pinctrl-xway.c	pinctrl: Get rid of duplicate of_node assignment in the drivers	2021-12-16 04:18:30 +01:00
pinctrl-zynq.c	pinctrl: zynq: use module_platform_driver to simplify the code	2022-03-15 01:46:13 +01:00
pinctrl-zynqmp.c	Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance"	2022-10-18 09:50:29 +02:00
pinmux.c	pinctrl: add one more "const" for generic function groups	2021-12-22 02:57:27 +01:00
pinmux.h	pinctrl: add one more "const" for generic function groups	2021-12-22 02:57:27 +01:00