WSL2-Linux-Kernel/Documentation/power
Linus Torvalds 355ba37d75 Power management updates for 5.8-rc1
- Rework the system-wide PM driver flags to make them easier to
    understand and use and update their documentation (Rafael Wysocki,
    Alan Stern).
 
  - Allow cpuidle governors to be switched at run time regardless of
    the kernel configuration and update the related documentation
    accordingly (Hanjun Guo).
 
  - Improve the resume device handling in the user space hibernarion
    interface code (Domenico Andreoli).
 
  - Document the intel-speed-select sysfs interface (Srinivas
    Pandruvada).
 
  - Make the ACPI code handing suspend to idle print more debug
    messages to help diagnose issues with it (Rafael Wysocki).
 
  - Fix a helper routine in the cpufreq core and correct a typo in
    the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
    Wenhu).
 
  - Update cpufreq drivers:
 
    * Make the intel_pstate driver start in the passive mode by
      default on systems without HWP (Rafael Wysocki).
 
    * Add i.MX7ULP support to the imx-cpufreq-dt driver and add
      i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
 
    * Convert the qoriq cpufreq driver to a platform one, make the
      platform code create a suitable device object for it and add
      platform dependencies to it (Mian Yousaf Kaukab, Geert
      Uytterhoeven).
 
    * Fix wrong compatible binding in the qcom driver (Ansuel Smith).
 
    * Build the omap driver by default for ARCH_OMAP2PLUS (Anders
      Roxell).
 
    * Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
 
  - Update cpuidle core and drivers:
 
    * Fix three reference count leaks in error code paths in the
      cpuidle core (Qiushi Wu).
 
    * Convert Qualcomm SPM to a generic cpuidle driver (Stephan
      Gerhold).
 
    * Fix up the execution order when entering a domain idle state in
      the PSCI driver (Ulf Hansson).
 
  - Fix a reference counting issue related to clock management and
    clean up two oddities in the PM-runtime framework (Rafael Wysocki,
    Andy Shevchenko).
 
  - Add ElkhartLake support to the Intel RAPL power capping driver
    and remove an unused local MSR definition from it (Jacob Pan,
    Sumeet Pawnikar).
 
  - Update devfreq core and drivers:
 
    * Replace strncpy() with strscpy() in the devfreq core and use
      lockdep asserts instead of manual checks for a locked mutex in
      it (Dmitry Osipenko, Krzysztof Kozlowski).
 
    * Add a generic imx bus scaling driver and make it register an
      interconnect device (Leonard Crestez, Gustavo A. R. Silva).
 
    * Make the cpufreq notifier in the tegra30 driver take boosting
      into account and delete an unuseful error message from that
      driver (Dmitry Osipenko, Markus Elfring).
 
  - Remove unneeded semicolon from the cpupower code (Zou Wei).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl7VGjwSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx46gP/jGAXlddFEQswi6qUT3Cff0A9mb8CdcX
 dyKrjX4xxo/wtBIAwSN4achxrgse//ayo2dYTzWRDd31W9Azbv+5F+46XsDRz4hL
 pH29u/E66NMtFWnHCmt78NEJn0FzSa0YBC43ZzwFwKktCK9skYIpGN2z6iuXUBSX
 Q5GHqop3zvDsdKQFBGL62xvUw/AmOTPG7ohIZvqWBN2mbOqEqMcoFHT+aUF/NbLj
 +i14dvTH767eDZGRVASmXWQyljjaRWm+SIw4+m8zT1D1Y3d5IFObuMN+9RQl1Tif
 BYjkgJ2oDDMhCJLW7TBuJB+g7exiyaSQds3nMr2ZR+eZbJipICjU4eehNEKIUopU
 DM17tHQfnwZfS/7YbCx3vYQwLkNq37AJyXS9uqCAIFM+0n4xN4/mIVmgWYISLDTs
 1v9olFxtwMRNpjGGQWPJAO7ebB8Zz9qhQv7pIkSQEfwp93/SzvlVf4vvruTeFN9J
 qqG60cDumXWAm+s43eQHJNn5nOd5ocWv0FBpo/cxqKbzxFVWwdB42Cm0SY+rK2ID
 uHdnc2DJcK2c78UVbz3Cmk4272foJt2zxchqjFXXAZPLrOsFfzmti4B28VxGxjmP
 LG3MhH5sdbF4yl/1aSC1Bnrt+PV9Lus6ut/VKhjwIpw8cqiXgpwSbMoDoaBd9UMQ
 ubGz2rplGAtB
 =APdj
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These rework the system-wide PM driver flags, make runtime switching
  of cpuidle governors easier, improve the user space hibernation
  interface code, add intel-speed-select interface documentation, add
  more debug messages to the ACPI code handling suspend to idle, update
  the cpufreq core and drivers, fix a minor issue in the cpuidle core
  and update two cpuidle drivers, improve the PM-runtime framework,
  update the Intel RAPL power capping driver, update devfreq core and
  drivers, and clean up the cpupower utility.

  Specifics:

   - Rework the system-wide PM driver flags to make them easier to
     understand and use and update their documentation (Rafael Wysocki,
     Alan Stern).

   - Allow cpuidle governors to be switched at run time regardless of
     the kernel configuration and update the related documentation
     accordingly (Hanjun Guo).

   - Improve the resume device handling in the user space hibernarion
     interface code (Domenico Andreoli).

   - Document the intel-speed-select sysfs interface (Srinivas
     Pandruvada).

   - Make the ACPI code handing suspend to idle print more debug
     messages to help diagnose issues with it (Rafael Wysocki).

   - Fix a helper routine in the cpufreq core and correct a typo in the
     struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
     Wenhu).

   - Update cpufreq drivers:

      - Make the intel_pstate driver start in the passive mode by
        default on systems without HWP (Rafael Wysocki).

      - Add i.MX7ULP support to the imx-cpufreq-dt driver and add
        i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).

      - Convert the qoriq cpufreq driver to a platform one, make the
        platform code create a suitable device object for it and add
        platform dependencies to it (Mian Yousaf Kaukab, Geert
        Uytterhoeven).

      - Fix wrong compatible binding in the qcom driver (Ansuel Smith).

      - Build the omap driver by default for ARCH_OMAP2PLUS (Anders
        Roxell).

      - Add r8a7742 SoC support to the dt cpufreq driver (Lad
        Prabhakar).

   - Update cpuidle core and drivers:

      - Fix three reference count leaks in error code paths in the
        cpuidle core (Qiushi Wu).

      - Convert Qualcomm SPM to a generic cpuidle driver (Stephan
        Gerhold).

      - Fix up the execution order when entering a domain idle state in
        the PSCI driver (Ulf Hansson).

   - Fix a reference counting issue related to clock management and
     clean up two oddities in the PM-runtime framework (Rafael Wysocki,
     Andy Shevchenko).

   - Add ElkhartLake support to the Intel RAPL power capping driver and
     remove an unused local MSR definition from it (Jacob Pan, Sumeet
     Pawnikar).

   - Update devfreq core and drivers:

      - Replace strncpy() with strscpy() in the devfreq core and use
        lockdep asserts instead of manual checks for a locked mutex in
        it (Dmitry Osipenko, Krzysztof Kozlowski).

      - Add a generic imx bus scaling driver and make it register an
        interconnect device (Leonard Crestez, Gustavo A. R. Silva).

      - Make the cpufreq notifier in the tegra30 driver take boosting
        into account and delete an unuseful error message from that
        driver (Dmitry Osipenko, Markus Elfring).

   - Remove unneeded semicolon from the cpupower code (Zou Wei)"

* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
  cpuidle: Fix three reference count leaks
  PM: runtime: Replace pm_runtime_callbacks_present()
  PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
  PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
  PM / devfreq: Replace strncpy with strscpy
  PM / devfreq: imx: Register interconnect device
  PM / devfreq: Add generic imx bus scaling driver
  PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
  PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
  PM: hibernate: Restrict writes to the resume device
  PM: runtime: clk: Fix clk_pm_runtime_get() error path
  cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
  ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
  ACPI: PM: s2idle: Print type of wakeup debug messages
  powercap: RAPL: remove unused local MSR define
  PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
  Documentation: admin-guide: pm: Document intel-speed-select
  PM: hibernate: Split off snapshot dev option
  PM: hibernate: Incorporate concurrency handling
  Documentation: ABI: make current_governer_ro as a candidate for removal
  ...
2020-06-02 13:17:23 -07:00
..
powercap
regulator
apm-acpi.rst
basic-pm-debugging.rst
charger-manager.rst
drivers-testing.rst
energy-model.rst
freezing-of-tasks.rst
index.rst
opp.rst
pci.rst Documentation: PM: sleep: Update driver flags documentation 2020-04-24 21:35:11 +02:00
pm_qos_interface.rst
power_supply_class.rst
runtime_pm.rst
s2ram.rst
suspend-and-cpuhotplug.rst cpu/hotplug: Remove disable_nonboot_cpus() 2020-05-07 15:18:40 +02:00
suspend-and-interrupts.rst
swsusp-and-swap-files.rst
swsusp-dmcrypt.rst
swsusp.rst
tricks.rst
userland-swsusp.rst
video.rst