167 строки
4.9 KiB
C
167 строки
4.9 KiB
C
/*
|
|
* Support for SuperH MigoR Quarter VGA LCD Panel
|
|
*
|
|
* Copyright (C) 2008 Magnus Damm
|
|
*
|
|
* Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
|
|
* Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
#include <cpu/sh7722.h>
|
|
#include <mach/migor.h>
|
|
|
|
/* LCD Module is a PH240320T according to board schematics. This module
|
|
* is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
|
|
* Driver IC. This IC is connected to the SH7722 built-in LCDC using a
|
|
* SYS-80 interface configured in 16 bit mode.
|
|
*
|
|
* Index 0: "Device Code Read" returns 0x1505.
|
|
*/
|
|
|
|
static void reset_lcd_module(void)
|
|
{
|
|
gpio_set_value(GPIO_PTH2, 0);
|
|
mdelay(2);
|
|
gpio_set_value(GPIO_PTH2, 1);
|
|
mdelay(1);
|
|
}
|
|
|
|
/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
|
|
|
|
static unsigned long adjust_reg18(unsigned short data)
|
|
{
|
|
unsigned long tmp1, tmp2;
|
|
|
|
tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
|
|
tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
|
|
return tmp1 | tmp2;
|
|
}
|
|
|
|
static void write_reg(void *sys_ops_handle,
|
|
struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
|
|
unsigned short reg, unsigned short data)
|
|
{
|
|
sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
|
|
}
|
|
|
|
static void write_reg16(void *sys_ops_handle,
|
|
struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
|
|
unsigned short reg, unsigned short data)
|
|
{
|
|
sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
|
|
sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
|
|
}
|
|
|
|
static unsigned long read_reg16(void *sys_ops_handle,
|
|
struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
|
|
unsigned short reg)
|
|
{
|
|
unsigned long data;
|
|
|
|
sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
|
|
data = sys_ops->read_data(sys_ops_handle);
|
|
return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
|
|
}
|
|
|
|
static void migor_lcd_qvga_seq(void *sys_ops_handle,
|
|
struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
|
|
unsigned short const *data, int no_data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < no_data; i += 2)
|
|
write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
|
|
}
|
|
|
|
static const unsigned short sync_data[] = {
|
|
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
|
|
};
|
|
|
|
static const unsigned short magic0_data[] = {
|
|
0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
|
|
0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
|
|
0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
|
|
};
|
|
|
|
static const unsigned short magic1_data[] = {
|
|
0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
|
|
0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
|
|
0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
|
|
0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
|
|
0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
|
|
0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
|
|
0x0015, 0x8000,
|
|
};
|
|
|
|
static const unsigned short magic2_data[] = {
|
|
0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
|
|
};
|
|
|
|
static const unsigned short magic3_data[] = {
|
|
0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
|
|
};
|
|
|
|
int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
|
|
{
|
|
unsigned long xres = 320;
|
|
unsigned long yres = 240;
|
|
int k;
|
|
|
|
reset_lcd_module();
|
|
migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
|
|
|
|
if (read_reg16(sohandle, so, 0) != 0x1505)
|
|
return -ENODEV;
|
|
|
|
pr_info("Migo-R QVGA LCD Module detected.\n");
|
|
|
|
migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
|
|
write_reg16(sohandle, so, 0x00A4, 0x0001);
|
|
mdelay(10);
|
|
|
|
migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
|
|
mdelay(100);
|
|
|
|
migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
|
|
write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
|
|
write_reg16(sohandle, so, 0x0051, 0x00ef);
|
|
write_reg16(sohandle, so, 0x0052, 0x0000);
|
|
write_reg16(sohandle, so, 0x0053, xres - 1);
|
|
|
|
migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
|
|
mdelay(10);
|
|
|
|
migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
|
|
mdelay(40);
|
|
|
|
/* clear GRAM to avoid displaying garbage */
|
|
|
|
write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
|
|
write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
|
|
|
|
for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
|
|
write_reg16(sohandle, so, 0x0022, 0x0000);
|
|
|
|
write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
|
|
write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
|
|
write_reg16(sohandle, so, 0x0007, 0x0173);
|
|
mdelay(40);
|
|
|
|
/* enable display */
|
|
write_reg(sohandle, so, 0x00, 0x22);
|
|
mdelay(100);
|
|
return 0;
|
|
}
|