330 строки
8.7 KiB
C
330 строки
8.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer
|
|
*
|
|
* Copyright 2010 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/imu/adis.h>
|
|
|
|
#define ADIS16209_STARTUP_DELAY_MS 220
|
|
#define ADIS16209_FLASH_CNT_REG 0x00
|
|
|
|
/* Data Output Register Definitions */
|
|
#define ADIS16209_SUPPLY_OUT_REG 0x02
|
|
#define ADIS16209_XACCL_OUT_REG 0x04
|
|
#define ADIS16209_YACCL_OUT_REG 0x06
|
|
/* Output, auxiliary ADC input */
|
|
#define ADIS16209_AUX_ADC_REG 0x08
|
|
/* Output, temperature */
|
|
#define ADIS16209_TEMP_OUT_REG 0x0A
|
|
/* Output, +/- 90 degrees X-axis inclination */
|
|
#define ADIS16209_XINCL_OUT_REG 0x0C
|
|
#define ADIS16209_YINCL_OUT_REG 0x0E
|
|
/* Output, +/-180 vertical rotational position */
|
|
#define ADIS16209_ROT_OUT_REG 0x10
|
|
|
|
/*
|
|
* Calibration Register Definitions.
|
|
* Acceleration, inclination or rotation offset null.
|
|
*/
|
|
#define ADIS16209_XACCL_NULL_REG 0x12
|
|
#define ADIS16209_YACCL_NULL_REG 0x14
|
|
#define ADIS16209_XINCL_NULL_REG 0x16
|
|
#define ADIS16209_YINCL_NULL_REG 0x18
|
|
#define ADIS16209_ROT_NULL_REG 0x1A
|
|
|
|
/* Alarm Register Definitions */
|
|
#define ADIS16209_ALM_MAG1_REG 0x20
|
|
#define ADIS16209_ALM_MAG2_REG 0x22
|
|
#define ADIS16209_ALM_SMPL1_REG 0x24
|
|
#define ADIS16209_ALM_SMPL2_REG 0x26
|
|
#define ADIS16209_ALM_CTRL_REG 0x28
|
|
|
|
#define ADIS16209_AUX_DAC_REG 0x30
|
|
#define ADIS16209_GPIO_CTRL_REG 0x32
|
|
#define ADIS16209_SMPL_PRD_REG 0x36
|
|
#define ADIS16209_AVG_CNT_REG 0x38
|
|
#define ADIS16209_SLP_CNT_REG 0x3A
|
|
|
|
#define ADIS16209_MSC_CTRL_REG 0x34
|
|
#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10)
|
|
#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8)
|
|
#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2)
|
|
/* Data-ready polarity: 1 = active high, 0 = active low */
|
|
#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
|
|
#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
|
|
|
|
#define ADIS16209_STAT_REG 0x3C
|
|
#define ADIS16209_STAT_ALARM2 BIT(9)
|
|
#define ADIS16209_STAT_ALARM1 BIT(8)
|
|
#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
|
|
#define ADIS16209_STAT_SPI_FAIL_BIT 3
|
|
#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
|
|
/* Power supply above 3.625 V */
|
|
#define ADIS16209_STAT_POWER_HIGH_BIT 1
|
|
/* Power supply below 2.975 V */
|
|
#define ADIS16209_STAT_POWER_LOW_BIT 0
|
|
|
|
#define ADIS16209_CMD_REG 0x3E
|
|
#define ADIS16209_CMD_SW_RESET BIT(7)
|
|
#define ADIS16209_CMD_CLEAR_STAT BIT(4)
|
|
#define ADIS16209_CMD_FACTORY_CAL BIT(1)
|
|
|
|
#define ADIS16209_ERROR_ACTIVE BIT(14)
|
|
|
|
enum adis16209_scan {
|
|
ADIS16209_SCAN_SUPPLY,
|
|
ADIS16209_SCAN_ACC_X,
|
|
ADIS16209_SCAN_ACC_Y,
|
|
ADIS16209_SCAN_AUX_ADC,
|
|
ADIS16209_SCAN_TEMP,
|
|
ADIS16209_SCAN_INCLI_X,
|
|
ADIS16209_SCAN_INCLI_Y,
|
|
ADIS16209_SCAN_ROT,
|
|
};
|
|
|
|
static const u8 adis16209_addresses[8][1] = {
|
|
[ADIS16209_SCAN_SUPPLY] = { },
|
|
[ADIS16209_SCAN_AUX_ADC] = { },
|
|
[ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL_REG },
|
|
[ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL_REG },
|
|
[ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL_REG },
|
|
[ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL_REG },
|
|
[ADIS16209_SCAN_ROT] = { },
|
|
[ADIS16209_SCAN_TEMP] = { },
|
|
};
|
|
|
|
static int adis16209_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct adis *st = iio_priv(indio_dev);
|
|
int m;
|
|
|
|
if (mask != IIO_CHAN_INFO_CALIBBIAS)
|
|
return -EINVAL;
|
|
|
|
switch (chan->type) {
|
|
case IIO_ACCEL:
|
|
case IIO_INCLI:
|
|
m = GENMASK(13, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return adis_write_reg_16(st, adis16209_addresses[chan->scan_index][0],
|
|
val & m);
|
|
}
|
|
|
|
static int adis16209_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2,
|
|
long mask)
|
|
{
|
|
struct adis *st = iio_priv(indio_dev);
|
|
int ret;
|
|
int bits;
|
|
u8 addr;
|
|
s16 val16;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
return adis_single_conversion(indio_dev, chan,
|
|
ADIS16209_ERROR_ACTIVE, val);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_VOLTAGE:
|
|
*val = 0;
|
|
switch (chan->channel) {
|
|
case 0:
|
|
*val2 = 305180; /* 0.30518 mV */
|
|
break;
|
|
case 1:
|
|
*val2 = 610500; /* 0.6105 mV */
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_TEMP:
|
|
*val = -470;
|
|
*val2 = 0;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_ACCEL:
|
|
/*
|
|
* IIO base unit for sensitivity of accelerometer
|
|
* is milli g.
|
|
* 1 LSB represents 0.244 mg.
|
|
*/
|
|
*val = 0;
|
|
*val2 = IIO_G_TO_M_S_2(244140);
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
case IIO_INCLI:
|
|
case IIO_ROT:
|
|
/*
|
|
* IIO base units for rotation are degrees.
|
|
* 1 LSB represents 0.025 milli degrees.
|
|
*/
|
|
*val = 0;
|
|
*val2 = 25000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
/*
|
|
* The raw ADC value is 0x4FE when the temperature
|
|
* is 45 degrees and the scale factor per milli
|
|
* degree celcius is -470.
|
|
*/
|
|
*val = 25000 / -470 - 0x4FE;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
switch (chan->type) {
|
|
case IIO_ACCEL:
|
|
bits = 14;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
addr = adis16209_addresses[chan->scan_index][0];
|
|
ret = adis_read_reg_16(st, addr, &val16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = sign_extend32(val16, bits - 1);
|
|
return IIO_VAL_INT;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_chan_spec adis16209_channels[] = {
|
|
ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT_REG, ADIS16209_SCAN_SUPPLY,
|
|
0, 14),
|
|
ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT_REG, ADIS16209_SCAN_TEMP, 0, 12),
|
|
ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT_REG, ADIS16209_SCAN_ACC_X,
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
|
|
ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT_REG, ADIS16209_SCAN_ACC_Y,
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
|
|
ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC_REG, ADIS16209_SCAN_AUX_ADC, 0, 12),
|
|
ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT_REG, ADIS16209_SCAN_INCLI_X,
|
|
0, 0, 14),
|
|
ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT_REG, ADIS16209_SCAN_INCLI_Y,
|
|
0, 0, 14),
|
|
ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT_REG, ADIS16209_SCAN_ROT, 0, 0, 14),
|
|
IIO_CHAN_SOFT_TIMESTAMP(8)
|
|
};
|
|
|
|
static const struct iio_info adis16209_info = {
|
|
.read_raw = adis16209_read_raw,
|
|
.write_raw = adis16209_write_raw,
|
|
.update_scan_mode = adis_update_scan_mode,
|
|
};
|
|
|
|
static const char * const adis16209_status_error_msgs[] = {
|
|
[ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
|
|
[ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
|
|
[ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
|
|
[ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
|
|
[ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
|
|
};
|
|
|
|
static const struct adis_data adis16209_data = {
|
|
.read_delay = 30,
|
|
.msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
|
|
.glob_cmd_reg = ADIS16209_CMD_REG,
|
|
.diag_stat_reg = ADIS16209_STAT_REG,
|
|
|
|
.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
|
|
.self_test_no_autoclear = true,
|
|
.startup_delay = ADIS16209_STARTUP_DELAY_MS,
|
|
|
|
.status_error_msgs = adis16209_status_error_msgs,
|
|
.status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
|
|
BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
|
|
BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
|
|
BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
|
|
BIT(ADIS16209_STAT_POWER_LOW_BIT),
|
|
};
|
|
|
|
static int adis16209_probe(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct adis *st;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
indio_dev->name = spi->dev.driver->name;
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->info = &adis16209_info;
|
|
indio_dev->channels = adis16209_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(adis16209_channels);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = adis_init(st, indio_dev, spi, &adis16209_data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adis_initial_startup(st);
|
|
if (ret)
|
|
goto error_cleanup_buffer_trigger;
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_cleanup_buffer_trigger;
|
|
|
|
return 0;
|
|
|
|
error_cleanup_buffer_trigger:
|
|
adis_cleanup_buffer_and_trigger(st, indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int adis16209_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct adis *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
adis_cleanup_buffer_and_trigger(st, indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver adis16209_driver = {
|
|
.driver = {
|
|
.name = "adis16209",
|
|
},
|
|
.probe = adis16209_probe,
|
|
.remove = adis16209_remove,
|
|
};
|
|
module_spi_driver(adis16209_driver);
|
|
|
|
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
|
|
MODULE_DESCRIPTION("Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("spi:adis16209");
|