3102 строки
105 KiB
Plaintext
3102 строки
105 KiB
Plaintext
0 Unnamed devices (e.g. non-device mounts)
|
|
0 = reserved as null device number
|
|
See block major 144, 145, 146 for expansion areas.
|
|
|
|
1 char Memory devices
|
|
1 = /dev/mem Physical memory access
|
|
2 = /dev/kmem Kernel virtual memory access
|
|
3 = /dev/null Null device
|
|
4 = /dev/port I/O port access
|
|
5 = /dev/zero Null byte source
|
|
6 = /dev/core OBSOLETE - replaced by /proc/kcore
|
|
7 = /dev/full Returns ENOSPC on write
|
|
8 = /dev/random Nondeterministic random number gen.
|
|
9 = /dev/urandom Faster, less secure random number gen.
|
|
10 = /dev/aio Asynchronous I/O notification interface
|
|
11 = /dev/kmsg Writes to this come out as printk's, reads
|
|
export the buffered printk records.
|
|
12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
|
|
|
|
1 block RAM disk
|
|
0 = /dev/ram0 First RAM disk
|
|
1 = /dev/ram1 Second RAM disk
|
|
...
|
|
250 = /dev/initrd Initial RAM disk
|
|
|
|
Older kernels had /dev/ramdisk (1, 1) here.
|
|
/dev/initrd refers to a RAM disk which was preloaded
|
|
by the boot loader; newer kernels use /dev/ram0 for
|
|
the initrd.
|
|
|
|
2 char Pseudo-TTY masters
|
|
0 = /dev/ptyp0 First PTY master
|
|
1 = /dev/ptyp1 Second PTY master
|
|
...
|
|
255 = /dev/ptyef 256th PTY master
|
|
|
|
Pseudo-tty's are named as follows:
|
|
* Masters are "pty", slaves are "tty";
|
|
* the fourth letter is one of pqrstuvwxyzabcde indicating
|
|
the 1st through 16th series of 16 pseudo-ttys each, and
|
|
* the fifth letter is one of 0123456789abcdef indicating
|
|
the position within the series.
|
|
|
|
These are the old-style (BSD) PTY devices; Unix98
|
|
devices are on major 128 and above and use the PTY
|
|
master multiplex (/dev/ptmx) to acquire a PTY on
|
|
demand.
|
|
|
|
2 block Floppy disks
|
|
0 = /dev/fd0 Controller 0, drive 0, autodetect
|
|
1 = /dev/fd1 Controller 0, drive 1, autodetect
|
|
2 = /dev/fd2 Controller 0, drive 2, autodetect
|
|
3 = /dev/fd3 Controller 0, drive 3, autodetect
|
|
128 = /dev/fd4 Controller 1, drive 0, autodetect
|
|
129 = /dev/fd5 Controller 1, drive 1, autodetect
|
|
130 = /dev/fd6 Controller 1, drive 2, autodetect
|
|
131 = /dev/fd7 Controller 1, drive 3, autodetect
|
|
|
|
To specify format, add to the autodetect device number:
|
|
0 = /dev/fd? Autodetect format
|
|
4 = /dev/fd?d360 5.25" 360K in a 360K drive(1)
|
|
20 = /dev/fd?h360 5.25" 360K in a 1200K drive(1)
|
|
48 = /dev/fd?h410 5.25" 410K in a 1200K drive
|
|
64 = /dev/fd?h420 5.25" 420K in a 1200K drive
|
|
24 = /dev/fd?h720 5.25" 720K in a 1200K drive
|
|
80 = /dev/fd?h880 5.25" 880K in a 1200K drive(1)
|
|
8 = /dev/fd?h1200 5.25" 1200K in a 1200K drive(1)
|
|
40 = /dev/fd?h1440 5.25" 1440K in a 1200K drive(1)
|
|
56 = /dev/fd?h1476 5.25" 1476K in a 1200K drive
|
|
72 = /dev/fd?h1494 5.25" 1494K in a 1200K drive
|
|
92 = /dev/fd?h1600 5.25" 1600K in a 1200K drive(1)
|
|
|
|
12 = /dev/fd?u360 3.5" 360K Double Density(2)
|
|
16 = /dev/fd?u720 3.5" 720K Double Density(1)
|
|
120 = /dev/fd?u800 3.5" 800K Double Density(2)
|
|
52 = /dev/fd?u820 3.5" 820K Double Density
|
|
68 = /dev/fd?u830 3.5" 830K Double Density
|
|
84 = /dev/fd?u1040 3.5" 1040K Double Density(1)
|
|
88 = /dev/fd?u1120 3.5" 1120K Double Density(1)
|
|
28 = /dev/fd?u1440 3.5" 1440K High Density(1)
|
|
124 = /dev/fd?u1600 3.5" 1600K High Density(1)
|
|
44 = /dev/fd?u1680 3.5" 1680K High Density(3)
|
|
60 = /dev/fd?u1722 3.5" 1722K High Density
|
|
76 = /dev/fd?u1743 3.5" 1743K High Density
|
|
96 = /dev/fd?u1760 3.5" 1760K High Density
|
|
116 = /dev/fd?u1840 3.5" 1840K High Density(3)
|
|
100 = /dev/fd?u1920 3.5" 1920K High Density(1)
|
|
32 = /dev/fd?u2880 3.5" 2880K Extra Density(1)
|
|
104 = /dev/fd?u3200 3.5" 3200K Extra Density
|
|
108 = /dev/fd?u3520 3.5" 3520K Extra Density
|
|
112 = /dev/fd?u3840 3.5" 3840K Extra Density(1)
|
|
|
|
36 = /dev/fd?CompaQ Compaq 2880K drive; obsolete?
|
|
|
|
(1) Autodetectable format
|
|
(2) Autodetectable format in a Double Density (720K) drive only
|
|
(3) Autodetectable format in a High Density (1440K) drive only
|
|
|
|
NOTE: The letter in the device name (d, q, h or u)
|
|
signifies the type of drive: 5.25" Double Density (d),
|
|
5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
|
|
(any model, u). The use of the capital letters D, H
|
|
and E for the 3.5" models have been deprecated, since
|
|
the drive type is insignificant for these devices.
|
|
|
|
3 char Pseudo-TTY slaves
|
|
0 = /dev/ttyp0 First PTY slave
|
|
1 = /dev/ttyp1 Second PTY slave
|
|
...
|
|
255 = /dev/ttyef 256th PTY slave
|
|
|
|
These are the old-style (BSD) PTY devices; Unix98
|
|
devices are on major 136 and above.
|
|
|
|
3 block First MFM, RLL and IDE hard disk/CD-ROM interface
|
|
0 = /dev/hda Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdb Slave: whole disk (or CD-ROM)
|
|
|
|
For partitions, add to the whole disk device number:
|
|
0 = /dev/hd? Whole disk
|
|
1 = /dev/hd?1 First partition
|
|
2 = /dev/hd?2 Second partition
|
|
...
|
|
63 = /dev/hd?63 63rd partition
|
|
|
|
For Linux/i386, partitions 1-4 are the primary
|
|
partitions, and 5 and above are logical partitions.
|
|
Other versions of Linux use partitioning schemes
|
|
appropriate to their respective architectures.
|
|
|
|
4 char TTY devices
|
|
0 = /dev/tty0 Current virtual console
|
|
|
|
1 = /dev/tty1 First virtual console
|
|
...
|
|
63 = /dev/tty63 63rd virtual console
|
|
64 = /dev/ttyS0 First UART serial port
|
|
...
|
|
255 = /dev/ttyS191 192nd UART serial port
|
|
|
|
UART serial ports refer to 8250/16450/16550 series devices.
|
|
|
|
Older versions of the Linux kernel used this major
|
|
number for BSD PTY devices. As of Linux 2.1.115, this
|
|
is no longer supported. Use major numbers 2 and 3.
|
|
|
|
4 block Aliases for dynamically allocated major devices to be used
|
|
when its not possible to create the real device nodes
|
|
because the root filesystem is mounted read-only.
|
|
|
|
0 = /dev/root
|
|
|
|
5 char Alternate TTY devices
|
|
0 = /dev/tty Current TTY device
|
|
1 = /dev/console System console
|
|
2 = /dev/ptmx PTY master multiplex
|
|
3 = /dev/ttyprintk User messages via printk TTY device
|
|
64 = /dev/cua0 Callout device for ttyS0
|
|
...
|
|
255 = /dev/cua191 Callout device for ttyS191
|
|
|
|
(5,1) is /dev/console starting with Linux 2.1.71. See
|
|
the section on terminal devices for more information
|
|
on /dev/console.
|
|
|
|
6 char Parallel printer devices
|
|
0 = /dev/lp0 Parallel printer on parport0
|
|
1 = /dev/lp1 Parallel printer on parport1
|
|
...
|
|
|
|
Current Linux kernels no longer have a fixed mapping
|
|
between parallel ports and I/O addresses. Instead,
|
|
they are redirected through the parport multiplex layer.
|
|
|
|
7 char Virtual console capture devices
|
|
0 = /dev/vcs Current vc text (glyph) contents
|
|
1 = /dev/vcs1 tty1 text (glyph) contents
|
|
...
|
|
63 = /dev/vcs63 tty63 text (glyph) contents
|
|
64 = /dev/vcsu Current vc text (unicode) contents
|
|
65 = /dev/vcsu1 tty1 text (unicode) contents
|
|
...
|
|
127 = /dev/vcsu63 tty63 text (unicode) contents
|
|
128 = /dev/vcsa Current vc text/attribute (glyph) contents
|
|
129 = /dev/vcsa1 tty1 text/attribute (glyph) contents
|
|
...
|
|
191 = /dev/vcsa63 tty63 text/attribute (glyph) contents
|
|
|
|
NOTE: These devices permit both read and write access.
|
|
|
|
7 block Loopback devices
|
|
0 = /dev/loop0 First loop device
|
|
1 = /dev/loop1 Second loop device
|
|
...
|
|
|
|
The loop devices are used to mount filesystems not
|
|
associated with block devices. The binding to the
|
|
loop devices is handled by mount(8) or losetup(8).
|
|
|
|
8 block SCSI disk devices (0-15)
|
|
0 = /dev/sda First SCSI disk whole disk
|
|
16 = /dev/sdb Second SCSI disk whole disk
|
|
32 = /dev/sdc Third SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdp Sixteenth SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
9 char SCSI tape devices
|
|
0 = /dev/st0 First SCSI tape, mode 0
|
|
1 = /dev/st1 Second SCSI tape, mode 0
|
|
...
|
|
32 = /dev/st0l First SCSI tape, mode 1
|
|
33 = /dev/st1l Second SCSI tape, mode 1
|
|
...
|
|
64 = /dev/st0m First SCSI tape, mode 2
|
|
65 = /dev/st1m Second SCSI tape, mode 2
|
|
...
|
|
96 = /dev/st0a First SCSI tape, mode 3
|
|
97 = /dev/st1a Second SCSI tape, mode 3
|
|
...
|
|
128 = /dev/nst0 First SCSI tape, mode 0, no rewind
|
|
129 = /dev/nst1 Second SCSI tape, mode 0, no rewind
|
|
...
|
|
160 = /dev/nst0l First SCSI tape, mode 1, no rewind
|
|
161 = /dev/nst1l Second SCSI tape, mode 1, no rewind
|
|
...
|
|
192 = /dev/nst0m First SCSI tape, mode 2, no rewind
|
|
193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
|
|
...
|
|
224 = /dev/nst0a First SCSI tape, mode 3, no rewind
|
|
225 = /dev/nst1a Second SCSI tape, mode 3, no rewind
|
|
...
|
|
|
|
"No rewind" refers to the omission of the default
|
|
automatic rewind on device close. The MTREW or MTOFFL
|
|
ioctl()'s can be used to rewind the tape regardless of
|
|
the device used to access it.
|
|
|
|
9 block Metadisk (RAID) devices
|
|
0 = /dev/md0 First metadisk group
|
|
1 = /dev/md1 Second metadisk group
|
|
...
|
|
|
|
The metadisk driver is used to span a
|
|
filesystem across multiple physical disks.
|
|
|
|
10 char Non-serial mice, misc features
|
|
0 = /dev/logibm Logitech bus mouse
|
|
1 = /dev/psaux PS/2-style mouse port
|
|
2 = /dev/inportbm Microsoft Inport bus mouse
|
|
3 = /dev/atibm ATI XL bus mouse
|
|
4 = /dev/jbm J-mouse
|
|
4 = /dev/amigamouse Amiga mouse (68k/Amiga)
|
|
5 = /dev/atarimouse Atari mouse
|
|
6 = /dev/sunmouse Sun mouse
|
|
7 = /dev/amigamouse1 Second Amiga mouse
|
|
8 = /dev/smouse Simple serial mouse driver
|
|
9 = /dev/pc110pad IBM PC-110 digitizer pad
|
|
10 = /dev/adbmouse Apple Desktop Bus mouse
|
|
11 = /dev/vrtpanel Vr41xx embedded touch panel
|
|
13 = /dev/vpcmouse Connectix Virtual PC Mouse
|
|
14 = /dev/touchscreen/ucb1x00 UCB 1x00 touchscreen
|
|
15 = /dev/touchscreen/mk712 MK712 touchscreen
|
|
128 = /dev/beep Fancy beep device
|
|
129 =
|
|
130 = /dev/watchdog Watchdog timer port
|
|
131 = /dev/temperature Machine internal temperature
|
|
132 = /dev/hwtrap Hardware fault trap
|
|
133 = /dev/exttrp External device trap
|
|
134 = /dev/apm_bios Advanced Power Management BIOS
|
|
135 = /dev/rtc Real Time Clock
|
|
137 = /dev/vhci Bluetooth virtual HCI driver
|
|
139 = /dev/openprom SPARC OpenBoot PROM
|
|
140 = /dev/relay8 Berkshire Products Octal relay card
|
|
141 = /dev/relay16 Berkshire Products ISO-16 relay card
|
|
142 =
|
|
143 = /dev/pciconf PCI configuration space
|
|
144 = /dev/nvram Non-volatile configuration RAM
|
|
145 = /dev/hfmodem Soundcard shortwave modem control
|
|
146 = /dev/graphics Linux/SGI graphics device
|
|
147 = /dev/opengl Linux/SGI OpenGL pipe
|
|
148 = /dev/gfx Linux/SGI graphics effects device
|
|
149 = /dev/input/mouse Linux/SGI Irix emulation mouse
|
|
150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
|
|
151 = /dev/led Front panel LEDs
|
|
152 = /dev/kpoll Kernel Poll Driver
|
|
153 = /dev/mergemem Memory merge device
|
|
154 = /dev/pmu Macintosh PowerBook power manager
|
|
155 = /dev/isictl MultiTech ISICom serial control
|
|
156 = /dev/lcd Front panel LCD display
|
|
157 = /dev/ac Applicom Intl Profibus card
|
|
158 = /dev/nwbutton Netwinder external button
|
|
159 = /dev/nwdebug Netwinder debug interface
|
|
160 = /dev/nwflash Netwinder flash memory
|
|
161 = /dev/userdma User-space DMA access
|
|
162 = /dev/smbus System Management Bus
|
|
163 = /dev/lik Logitech Internet Keyboard
|
|
164 = /dev/ipmo Intel Intelligent Platform Management
|
|
165 = /dev/vmmon VMware virtual machine monitor
|
|
166 = /dev/i2o/ctl I2O configuration manager
|
|
167 = /dev/specialix_sxctl Specialix serial control
|
|
168 = /dev/tcldrv Technology Concepts serial control
|
|
169 = /dev/specialix_rioctl Specialix RIO serial control
|
|
170 = /dev/thinkpad/thinkpad IBM Thinkpad devices
|
|
171 = /dev/srripc QNX4 API IPC manager
|
|
172 = /dev/usemaclone Semaphore clone device
|
|
173 = /dev/ipmikcs Intelligent Platform Management
|
|
174 = /dev/uctrl SPARCbook 3 microcontroller
|
|
175 = /dev/agpgart AGP Graphics Address Remapping Table
|
|
176 = /dev/gtrsc Gorgy Timing radio clock
|
|
177 = /dev/cbm Serial CBM bus
|
|
178 = /dev/jsflash JavaStation OS flash SIMM
|
|
179 = /dev/xsvc High-speed shared-mem/semaphore service
|
|
180 = /dev/vrbuttons Vr41xx button input device
|
|
181 = /dev/toshiba Toshiba laptop SMM support
|
|
182 = /dev/perfctr Performance-monitoring counters
|
|
183 = /dev/hwrng Generic random number generator
|
|
184 = /dev/cpu/microcode CPU microcode update interface
|
|
186 = /dev/atomicps Atomic snapshot of process state data
|
|
187 = /dev/irnet IrNET device
|
|
188 = /dev/smbusbios SMBus BIOS
|
|
189 = /dev/ussp_ctl User space serial port control
|
|
190 = /dev/crash Mission Critical Linux crash dump facility
|
|
191 = /dev/pcl181 <information missing>
|
|
192 = /dev/nas_xbus NAS xbus LCD/buttons access
|
|
193 = /dev/d7s SPARC 7-segment display
|
|
194 = /dev/zkshim Zero-Knowledge network shim control
|
|
195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
|
|
196 = /dev/vfio/vfio VFIO userspace driver interface
|
|
197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
|
|
198 = /dev/sexec Signed executable interface
|
|
199 = /dev/scanners/cuecat :CueCat barcode scanner
|
|
200 = /dev/net/tun TAP/TUN network device
|
|
201 = /dev/button/gulpb Transmeta GULP-B buttons
|
|
202 = /dev/emd/ctl Enhanced Metadisk RAID (EMD) control
|
|
203 = /dev/cuse Cuse (character device in user-space)
|
|
204 = /dev/video/em8300 EM8300 DVD decoder control
|
|
205 = /dev/video/em8300_mv EM8300 DVD decoder video
|
|
206 = /dev/video/em8300_ma EM8300 DVD decoder audio
|
|
207 = /dev/video/em8300_sp EM8300 DVD decoder subpicture
|
|
208 = /dev/compaq/cpqphpc Compaq PCI Hot Plug Controller
|
|
209 = /dev/compaq/cpqrid Compaq Remote Insight Driver
|
|
210 = /dev/impi/bt IMPI coprocessor block transfer
|
|
211 = /dev/impi/smic IMPI coprocessor stream interface
|
|
212 = /dev/watchdogs/0 First watchdog device
|
|
213 = /dev/watchdogs/1 Second watchdog device
|
|
214 = /dev/watchdogs/2 Third watchdog device
|
|
215 = /dev/watchdogs/3 Fourth watchdog device
|
|
216 = /dev/fujitsu/apanel Fujitsu/Siemens application panel
|
|
217 = /dev/ni/natmotn National Instruments Motion
|
|
218 = /dev/kchuid Inter-process chuid control
|
|
219 = /dev/modems/mwave MWave modem firmware upload
|
|
220 = /dev/mptctl Message passing technology (MPT) control
|
|
221 = /dev/mvista/hssdsi Montavista PICMG hot swap system driver
|
|
222 = /dev/mvista/hasi Montavista PICMG high availability
|
|
223 = /dev/input/uinput User level driver support for input
|
|
224 = /dev/tpm TCPA TPM driver
|
|
225 = /dev/pps Pulse Per Second driver
|
|
226 = /dev/systrace Systrace device
|
|
227 = /dev/mcelog X86_64 Machine Check Exception driver
|
|
228 = /dev/hpet HPET driver
|
|
229 = /dev/fuse Fuse (virtual filesystem in user-space)
|
|
230 = /dev/midishare MidiShare driver
|
|
231 = /dev/snapshot System memory snapshot device
|
|
232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
|
|
233 = /dev/kmview View-OS A process with a view
|
|
234 = /dev/btrfs-control Btrfs control device
|
|
235 = /dev/autofs Autofs control device
|
|
236 = /dev/mapper/control Device-Mapper control device
|
|
237 = /dev/loop-control Loopback control device
|
|
238 = /dev/vhost-net Host kernel accelerator for virtio net
|
|
239 = /dev/uhid User-space I/O driver support for HID subsystem
|
|
240 = /dev/userio Serio driver testing device
|
|
241 = /dev/vhost-vsock Host kernel driver for virtio vsock
|
|
|
|
242-254 Reserved for local use
|
|
255 Reserved for MISC_DYNAMIC_MINOR
|
|
|
|
11 char Raw keyboard device (Linux/SPARC only)
|
|
0 = /dev/kbd Raw keyboard device
|
|
|
|
11 char Serial Mux device (Linux/PA-RISC only)
|
|
0 = /dev/ttyB0 First mux port
|
|
1 = /dev/ttyB1 Second mux port
|
|
...
|
|
|
|
11 block SCSI CD-ROM devices
|
|
0 = /dev/scd0 First SCSI CD-ROM
|
|
1 = /dev/scd1 Second SCSI CD-ROM
|
|
...
|
|
|
|
The prefix /dev/sr (instead of /dev/scd) has been deprecated.
|
|
|
|
12 char QIC-02 tape
|
|
2 = /dev/ntpqic11 QIC-11, no rewind-on-close
|
|
3 = /dev/tpqic11 QIC-11, rewind-on-close
|
|
4 = /dev/ntpqic24 QIC-24, no rewind-on-close
|
|
5 = /dev/tpqic24 QIC-24, rewind-on-close
|
|
6 = /dev/ntpqic120 QIC-120, no rewind-on-close
|
|
7 = /dev/tpqic120 QIC-120, rewind-on-close
|
|
8 = /dev/ntpqic150 QIC-150, no rewind-on-close
|
|
9 = /dev/tpqic150 QIC-150, rewind-on-close
|
|
|
|
The device names specified are proposed -- if there
|
|
are "standard" names for these devices, please let me know.
|
|
|
|
12 block
|
|
|
|
13 char Input core
|
|
0 = /dev/input/js0 First joystick
|
|
1 = /dev/input/js1 Second joystick
|
|
...
|
|
32 = /dev/input/mouse0 First mouse
|
|
33 = /dev/input/mouse1 Second mouse
|
|
...
|
|
63 = /dev/input/mice Unified mouse
|
|
64 = /dev/input/event0 First event queue
|
|
65 = /dev/input/event1 Second event queue
|
|
...
|
|
|
|
Each device type has 5 bits (32 minors).
|
|
|
|
13 block Previously used for the XT disk (/dev/xdN)
|
|
Deleted in kernel v3.9.
|
|
|
|
14 char Open Sound System (OSS)
|
|
0 = /dev/mixer Mixer control
|
|
1 = /dev/sequencer Audio sequencer
|
|
2 = /dev/midi00 First MIDI port
|
|
3 = /dev/dsp Digital audio
|
|
4 = /dev/audio Sun-compatible digital audio
|
|
6 =
|
|
7 = /dev/audioctl SPARC audio control device
|
|
8 = /dev/sequencer2 Sequencer -- alternate device
|
|
16 = /dev/mixer1 Second soundcard mixer control
|
|
17 = /dev/patmgr0 Sequencer patch manager
|
|
18 = /dev/midi01 Second MIDI port
|
|
19 = /dev/dsp1 Second soundcard digital audio
|
|
20 = /dev/audio1 Second soundcard Sun digital audio
|
|
33 = /dev/patmgr1 Sequencer patch manager
|
|
34 = /dev/midi02 Third MIDI port
|
|
50 = /dev/midi03 Fourth MIDI port
|
|
|
|
14 block
|
|
|
|
15 char Joystick
|
|
0 = /dev/js0 First analog joystick
|
|
1 = /dev/js1 Second analog joystick
|
|
...
|
|
128 = /dev/djs0 First digital joystick
|
|
129 = /dev/djs1 Second digital joystick
|
|
...
|
|
15 block Sony CDU-31A/CDU-33A CD-ROM
|
|
0 = /dev/sonycd Sony CDU-31a CD-ROM
|
|
|
|
16 char Non-SCSI scanners
|
|
0 = /dev/gs4500 Genius 4500 handheld scanner
|
|
|
|
16 block GoldStar CD-ROM
|
|
0 = /dev/gscd GoldStar CD-ROM
|
|
|
|
17 char OBSOLETE (was Chase serial card)
|
|
0 = /dev/ttyH0 First Chase port
|
|
1 = /dev/ttyH1 Second Chase port
|
|
...
|
|
17 block Optics Storage CD-ROM
|
|
0 = /dev/optcd Optics Storage CD-ROM
|
|
|
|
18 char OBSOLETE (was Chase serial card - alternate devices)
|
|
0 = /dev/cuh0 Callout device for ttyH0
|
|
1 = /dev/cuh1 Callout device for ttyH1
|
|
...
|
|
18 block Sanyo CD-ROM
|
|
0 = /dev/sjcd Sanyo CD-ROM
|
|
|
|
19 char Cyclades serial card
|
|
0 = /dev/ttyC0 First Cyclades port
|
|
...
|
|
31 = /dev/ttyC31 32nd Cyclades port
|
|
|
|
19 block "Double" compressed disk
|
|
0 = /dev/double0 First compressed disk
|
|
...
|
|
7 = /dev/double7 Eighth compressed disk
|
|
128 = /dev/cdouble0 Mirror of first compressed disk
|
|
...
|
|
135 = /dev/cdouble7 Mirror of eighth compressed disk
|
|
|
|
See the Double documentation for the meaning of the
|
|
mirror devices.
|
|
|
|
20 char Cyclades serial card - alternate devices
|
|
0 = /dev/cub0 Callout device for ttyC0
|
|
...
|
|
31 = /dev/cub31 Callout device for ttyC31
|
|
|
|
20 block Hitachi CD-ROM (under development)
|
|
0 = /dev/hitcd Hitachi CD-ROM
|
|
|
|
21 char Generic SCSI access
|
|
0 = /dev/sg0 First generic SCSI device
|
|
1 = /dev/sg1 Second generic SCSI device
|
|
...
|
|
|
|
Most distributions name these /dev/sga, /dev/sgb...;
|
|
this sets an unnecessary limit of 26 SCSI devices in
|
|
the system and is counter to standard Linux
|
|
device-naming practice.
|
|
|
|
21 block Acorn MFM hard drive interface
|
|
0 = /dev/mfma First MFM drive whole disk
|
|
64 = /dev/mfmb Second MFM drive whole disk
|
|
|
|
This device is used on the ARM-based Acorn RiscPC.
|
|
Partitions are handled the same way as for IDE disks
|
|
(see major number 3).
|
|
|
|
22 char Digiboard serial card
|
|
0 = /dev/ttyD0 First Digiboard port
|
|
1 = /dev/ttyD1 Second Digiboard port
|
|
...
|
|
22 block Second IDE hard disk/CD-ROM interface
|
|
0 = /dev/hdc Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdd Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
23 char Digiboard serial card - alternate devices
|
|
0 = /dev/cud0 Callout device for ttyD0
|
|
1 = /dev/cud1 Callout device for ttyD1
|
|
...
|
|
23 block Mitsumi proprietary CD-ROM
|
|
0 = /dev/mcd Mitsumi CD-ROM
|
|
|
|
24 char Stallion serial card
|
|
0 = /dev/ttyE0 Stallion port 0 card 0
|
|
1 = /dev/ttyE1 Stallion port 1 card 0
|
|
...
|
|
64 = /dev/ttyE64 Stallion port 0 card 1
|
|
65 = /dev/ttyE65 Stallion port 1 card 1
|
|
...
|
|
128 = /dev/ttyE128 Stallion port 0 card 2
|
|
129 = /dev/ttyE129 Stallion port 1 card 2
|
|
...
|
|
192 = /dev/ttyE192 Stallion port 0 card 3
|
|
193 = /dev/ttyE193 Stallion port 1 card 3
|
|
...
|
|
24 block Sony CDU-535 CD-ROM
|
|
0 = /dev/cdu535 Sony CDU-535 CD-ROM
|
|
|
|
25 char Stallion serial card - alternate devices
|
|
0 = /dev/cue0 Callout device for ttyE0
|
|
1 = /dev/cue1 Callout device for ttyE1
|
|
...
|
|
64 = /dev/cue64 Callout device for ttyE64
|
|
65 = /dev/cue65 Callout device for ttyE65
|
|
...
|
|
128 = /dev/cue128 Callout device for ttyE128
|
|
129 = /dev/cue129 Callout device for ttyE129
|
|
...
|
|
192 = /dev/cue192 Callout device for ttyE192
|
|
193 = /dev/cue193 Callout device for ttyE193
|
|
...
|
|
25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
|
|
0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
|
|
1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
|
|
2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
|
|
3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
|
|
|
|
26 char
|
|
|
|
26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
|
|
0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
|
|
1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
|
|
2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
|
|
3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
|
|
|
|
27 char QIC-117 tape
|
|
0 = /dev/qft0 Unit 0, rewind-on-close
|
|
1 = /dev/qft1 Unit 1, rewind-on-close
|
|
2 = /dev/qft2 Unit 2, rewind-on-close
|
|
3 = /dev/qft3 Unit 3, rewind-on-close
|
|
4 = /dev/nqft0 Unit 0, no rewind-on-close
|
|
5 = /dev/nqft1 Unit 1, no rewind-on-close
|
|
6 = /dev/nqft2 Unit 2, no rewind-on-close
|
|
7 = /dev/nqft3 Unit 3, no rewind-on-close
|
|
16 = /dev/zqft0 Unit 0, rewind-on-close, compression
|
|
17 = /dev/zqft1 Unit 1, rewind-on-close, compression
|
|
18 = /dev/zqft2 Unit 2, rewind-on-close, compression
|
|
19 = /dev/zqft3 Unit 3, rewind-on-close, compression
|
|
20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
|
|
21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
|
|
22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
|
|
23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
|
|
32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
|
|
33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
|
|
34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
|
|
35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
|
|
36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
|
|
37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
|
|
38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
|
|
39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
|
|
|
|
27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
|
|
0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
|
|
1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
|
|
2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
|
|
3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
|
|
|
|
28 char Stallion serial card - card programming
|
|
0 = /dev/staliomem0 First Stallion card I/O memory
|
|
1 = /dev/staliomem1 Second Stallion card I/O memory
|
|
2 = /dev/staliomem2 Third Stallion card I/O memory
|
|
3 = /dev/staliomem3 Fourth Stallion card I/O memory
|
|
|
|
28 char Atari SLM ACSI laser printer (68k/Atari)
|
|
0 = /dev/slm0 First SLM laser printer
|
|
1 = /dev/slm1 Second SLM laser printer
|
|
...
|
|
28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
|
|
0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
|
|
1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
|
|
2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
|
|
3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
|
|
|
|
28 block ACSI disk (68k/Atari)
|
|
0 = /dev/ada First ACSI disk whole disk
|
|
16 = /dev/adb Second ACSI disk whole disk
|
|
32 = /dev/adc Third ACSI disk whole disk
|
|
...
|
|
240 = /dev/adp 16th ACSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15, like SCSI.
|
|
|
|
29 char Universal frame buffer
|
|
0 = /dev/fb0 First frame buffer
|
|
1 = /dev/fb1 Second frame buffer
|
|
...
|
|
31 = /dev/fb31 32nd frame buffer
|
|
|
|
29 block Aztech/Orchid/Okano/Wearnes CD-ROM
|
|
0 = /dev/aztcd Aztech CD-ROM
|
|
|
|
30 char iBCS-2 compatibility devices
|
|
0 = /dev/socksys Socket access
|
|
1 = /dev/spx SVR3 local X interface
|
|
32 = /dev/inet/ip Network access
|
|
33 = /dev/inet/icmp
|
|
34 = /dev/inet/ggp
|
|
35 = /dev/inet/ipip
|
|
36 = /dev/inet/tcp
|
|
37 = /dev/inet/egp
|
|
38 = /dev/inet/pup
|
|
39 = /dev/inet/udp
|
|
40 = /dev/inet/idp
|
|
41 = /dev/inet/rawip
|
|
|
|
Additionally, iBCS-2 requires the following links:
|
|
|
|
/dev/ip -> /dev/inet/ip
|
|
/dev/icmp -> /dev/inet/icmp
|
|
/dev/ggp -> /dev/inet/ggp
|
|
/dev/ipip -> /dev/inet/ipip
|
|
/dev/tcp -> /dev/inet/tcp
|
|
/dev/egp -> /dev/inet/egp
|
|
/dev/pup -> /dev/inet/pup
|
|
/dev/udp -> /dev/inet/udp
|
|
/dev/idp -> /dev/inet/idp
|
|
/dev/rawip -> /dev/inet/rawip
|
|
/dev/inet/arp -> /dev/inet/udp
|
|
/dev/inet/rip -> /dev/inet/udp
|
|
/dev/nfsd -> /dev/socksys
|
|
/dev/X0R -> /dev/null (? apparently not required ?)
|
|
|
|
30 block Philips LMS CM-205 CD-ROM
|
|
0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
|
|
|
|
/dev/lmscd is an older name for this device. This
|
|
driver does not work with the CM-205MS CD-ROM.
|
|
|
|
31 char MPU-401 MIDI
|
|
0 = /dev/mpu401data MPU-401 data port
|
|
1 = /dev/mpu401stat MPU-401 status port
|
|
|
|
31 block ROM/flash memory card
|
|
0 = /dev/rom0 First ROM card (rw)
|
|
...
|
|
7 = /dev/rom7 Eighth ROM card (rw)
|
|
8 = /dev/rrom0 First ROM card (ro)
|
|
...
|
|
15 = /dev/rrom7 Eighth ROM card (ro)
|
|
16 = /dev/flash0 First flash memory card (rw)
|
|
...
|
|
23 = /dev/flash7 Eighth flash memory card (rw)
|
|
24 = /dev/rflash0 First flash memory card (ro)
|
|
...
|
|
31 = /dev/rflash7 Eighth flash memory card (ro)
|
|
|
|
The read-write (rw) devices support back-caching
|
|
written data in RAM, as well as writing to flash RAM
|
|
devices. The read-only devices (ro) support reading
|
|
only.
|
|
|
|
32 char Specialix serial card
|
|
0 = /dev/ttyX0 First Specialix port
|
|
1 = /dev/ttyX1 Second Specialix port
|
|
...
|
|
32 block Philips LMS CM-206 CD-ROM
|
|
0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
|
|
|
|
33 char Specialix serial card - alternate devices
|
|
0 = /dev/cux0 Callout device for ttyX0
|
|
1 = /dev/cux1 Callout device for ttyX1
|
|
...
|
|
33 block Third IDE hard disk/CD-ROM interface
|
|
0 = /dev/hde Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdf Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
34 char Z8530 HDLC driver
|
|
0 = /dev/scc0 First Z8530, first port
|
|
1 = /dev/scc1 First Z8530, second port
|
|
2 = /dev/scc2 Second Z8530, first port
|
|
3 = /dev/scc3 Second Z8530, second port
|
|
...
|
|
|
|
In a previous version these devices were named
|
|
/dev/sc1 for /dev/scc0, /dev/sc2 for /dev/scc1, and so
|
|
on.
|
|
|
|
34 block Fourth IDE hard disk/CD-ROM interface
|
|
0 = /dev/hdg Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdh Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
35 char tclmidi MIDI driver
|
|
0 = /dev/midi0 First MIDI port, kernel timed
|
|
1 = /dev/midi1 Second MIDI port, kernel timed
|
|
2 = /dev/midi2 Third MIDI port, kernel timed
|
|
3 = /dev/midi3 Fourth MIDI port, kernel timed
|
|
64 = /dev/rmidi0 First MIDI port, untimed
|
|
65 = /dev/rmidi1 Second MIDI port, untimed
|
|
66 = /dev/rmidi2 Third MIDI port, untimed
|
|
67 = /dev/rmidi3 Fourth MIDI port, untimed
|
|
128 = /dev/smpte0 First MIDI port, SMPTE timed
|
|
129 = /dev/smpte1 Second MIDI port, SMPTE timed
|
|
130 = /dev/smpte2 Third MIDI port, SMPTE timed
|
|
131 = /dev/smpte3 Fourth MIDI port, SMPTE timed
|
|
|
|
35 block Slow memory ramdisk
|
|
0 = /dev/slram Slow memory ramdisk
|
|
|
|
36 char Netlink support
|
|
0 = /dev/route Routing, device updates, kernel to user
|
|
1 = /dev/skip enSKIP security cache control
|
|
3 = /dev/fwmonitor Firewall packet copies
|
|
16 = /dev/tap0 First Ethertap device
|
|
...
|
|
31 = /dev/tap15 16th Ethertap device
|
|
|
|
36 block OBSOLETE (was MCA ESDI hard disk)
|
|
|
|
37 char IDE tape
|
|
0 = /dev/ht0 First IDE tape
|
|
1 = /dev/ht1 Second IDE tape
|
|
...
|
|
128 = /dev/nht0 First IDE tape, no rewind-on-close
|
|
129 = /dev/nht1 Second IDE tape, no rewind-on-close
|
|
...
|
|
|
|
Currently, only one IDE tape drive is supported.
|
|
|
|
37 block Zorro II ramdisk
|
|
0 = /dev/z2ram Zorro II ramdisk
|
|
|
|
38 char Myricom PCI Myrinet board
|
|
0 = /dev/mlanai0 First Myrinet board
|
|
1 = /dev/mlanai1 Second Myrinet board
|
|
...
|
|
|
|
This device is used for status query, board control
|
|
and "user level packet I/O." This board is also
|
|
accessible as a standard networking "eth" device.
|
|
|
|
38 block OBSOLETE (was Linux/AP+)
|
|
|
|
39 char ML-16P experimental I/O board
|
|
0 = /dev/ml16pa-a0 First card, first analog channel
|
|
1 = /dev/ml16pa-a1 First card, second analog channel
|
|
...
|
|
15 = /dev/ml16pa-a15 First card, 16th analog channel
|
|
16 = /dev/ml16pa-d First card, digital lines
|
|
17 = /dev/ml16pa-c0 First card, first counter/timer
|
|
18 = /dev/ml16pa-c1 First card, second counter/timer
|
|
19 = /dev/ml16pa-c2 First card, third counter/timer
|
|
32 = /dev/ml16pb-a0 Second card, first analog channel
|
|
33 = /dev/ml16pb-a1 Second card, second analog channel
|
|
...
|
|
47 = /dev/ml16pb-a15 Second card, 16th analog channel
|
|
48 = /dev/ml16pb-d Second card, digital lines
|
|
49 = /dev/ml16pb-c0 Second card, first counter/timer
|
|
50 = /dev/ml16pb-c1 Second card, second counter/timer
|
|
51 = /dev/ml16pb-c2 Second card, third counter/timer
|
|
...
|
|
39 block
|
|
|
|
40 char
|
|
|
|
40 block
|
|
|
|
41 char Yet Another Micro Monitor
|
|
0 = /dev/yamm Yet Another Micro Monitor
|
|
|
|
41 block
|
|
|
|
42 char Demo/sample use
|
|
|
|
42 block Demo/sample use
|
|
|
|
This number is intended for use in sample code, as
|
|
well as a general "example" device number. It
|
|
should never be used for a device driver that is being
|
|
distributed; either obtain an official number or use
|
|
the local/experimental range. The sudden addition or
|
|
removal of a driver with this number should not cause
|
|
ill effects to the system (bugs excepted.)
|
|
|
|
IN PARTICULAR, ANY DISTRIBUTION WHICH CONTAINS A
|
|
DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
|
|
|
|
43 char isdn4linux virtual modem
|
|
0 = /dev/ttyI0 First virtual modem
|
|
...
|
|
63 = /dev/ttyI63 64th virtual modem
|
|
|
|
43 block Network block devices
|
|
0 = /dev/nb0 First network block device
|
|
1 = /dev/nb1 Second network block device
|
|
...
|
|
|
|
Network Block Device is somehow similar to loopback
|
|
devices: If you read from it, it sends packet across
|
|
network asking server for data. If you write to it, it
|
|
sends packet telling server to write. It could be used
|
|
to mounting filesystems over the net, swapping over
|
|
the net, implementing block device in userland etc.
|
|
|
|
44 char isdn4linux virtual modem - alternate devices
|
|
0 = /dev/cui0 Callout device for ttyI0
|
|
...
|
|
63 = /dev/cui63 Callout device for ttyI63
|
|
|
|
44 block Flash Translation Layer (FTL) filesystems
|
|
0 = /dev/ftla FTL on first Memory Technology Device
|
|
16 = /dev/ftlb FTL on second Memory Technology Device
|
|
32 = /dev/ftlc FTL on third Memory Technology Device
|
|
...
|
|
240 = /dev/ftlp FTL on 16th Memory Technology Device
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the partition
|
|
limit is 15 rather than 63 per disk (same as SCSI.)
|
|
|
|
45 char isdn4linux ISDN BRI driver
|
|
0 = /dev/isdn0 First virtual B channel raw data
|
|
...
|
|
63 = /dev/isdn63 64th virtual B channel raw data
|
|
64 = /dev/isdnctrl0 First channel control/debug
|
|
...
|
|
127 = /dev/isdnctrl63 64th channel control/debug
|
|
|
|
128 = /dev/ippp0 First SyncPPP device
|
|
...
|
|
191 = /dev/ippp63 64th SyncPPP device
|
|
|
|
255 = /dev/isdninfo ISDN monitor interface
|
|
|
|
45 block Parallel port IDE disk devices
|
|
0 = /dev/pda First parallel port IDE disk
|
|
16 = /dev/pdb Second parallel port IDE disk
|
|
32 = /dev/pdc Third parallel port IDE disk
|
|
48 = /dev/pdd Fourth parallel port IDE disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the partition
|
|
limit is 15 rather than 63 per disk.
|
|
|
|
46 char Comtrol Rocketport serial card
|
|
0 = /dev/ttyR0 First Rocketport port
|
|
1 = /dev/ttyR1 Second Rocketport port
|
|
...
|
|
46 block Parallel port ATAPI CD-ROM devices
|
|
0 = /dev/pcd0 First parallel port ATAPI CD-ROM
|
|
1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
|
|
2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
|
|
3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
|
|
|
|
47 char Comtrol Rocketport serial card - alternate devices
|
|
0 = /dev/cur0 Callout device for ttyR0
|
|
1 = /dev/cur1 Callout device for ttyR1
|
|
...
|
|
47 block Parallel port ATAPI disk devices
|
|
0 = /dev/pf0 First parallel port ATAPI disk
|
|
1 = /dev/pf1 Second parallel port ATAPI disk
|
|
2 = /dev/pf2 Third parallel port ATAPI disk
|
|
3 = /dev/pf3 Fourth parallel port ATAPI disk
|
|
|
|
This driver is intended for floppy disks and similar
|
|
devices and hence does not support partitioning.
|
|
|
|
48 char SDL RISCom serial card
|
|
0 = /dev/ttyL0 First RISCom port
|
|
1 = /dev/ttyL1 Second RISCom port
|
|
...
|
|
48 block Mylex DAC960 PCI RAID controller; first controller
|
|
0 = /dev/rd/c0d0 First disk, whole disk
|
|
8 = /dev/rd/c0d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c0d31 32nd disk, whole disk
|
|
|
|
For partitions add:
|
|
0 = /dev/rd/c?d? Whole disk
|
|
1 = /dev/rd/c?d?p1 First partition
|
|
...
|
|
7 = /dev/rd/c?d?p7 Seventh partition
|
|
|
|
49 char SDL RISCom serial card - alternate devices
|
|
0 = /dev/cul0 Callout device for ttyL0
|
|
1 = /dev/cul1 Callout device for ttyL1
|
|
...
|
|
49 block Mylex DAC960 PCI RAID controller; second controller
|
|
0 = /dev/rd/c1d0 First disk, whole disk
|
|
8 = /dev/rd/c1d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c1d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
50 char Reserved for GLINT
|
|
|
|
50 block Mylex DAC960 PCI RAID controller; third controller
|
|
0 = /dev/rd/c2d0 First disk, whole disk
|
|
8 = /dev/rd/c2d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c2d31 32nd disk, whole disk
|
|
|
|
51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
|
|
0 = /dev/bc0 First Baycom radio modem
|
|
1 = /dev/bc1 Second Baycom radio modem
|
|
...
|
|
51 block Mylex DAC960 PCI RAID controller; fourth controller
|
|
0 = /dev/rd/c3d0 First disk, whole disk
|
|
8 = /dev/rd/c3d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c3d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
52 char Spellcaster DataComm/BRI ISDN card
|
|
0 = /dev/dcbri0 First DataComm card
|
|
1 = /dev/dcbri1 Second DataComm card
|
|
2 = /dev/dcbri2 Third DataComm card
|
|
3 = /dev/dcbri3 Fourth DataComm card
|
|
|
|
52 block Mylex DAC960 PCI RAID controller; fifth controller
|
|
0 = /dev/rd/c4d0 First disk, whole disk
|
|
8 = /dev/rd/c4d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c4d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
53 char BDM interface for remote debugging MC683xx microcontrollers
|
|
0 = /dev/pd_bdm0 PD BDM interface on lp0
|
|
1 = /dev/pd_bdm1 PD BDM interface on lp1
|
|
2 = /dev/pd_bdm2 PD BDM interface on lp2
|
|
4 = /dev/icd_bdm0 ICD BDM interface on lp0
|
|
5 = /dev/icd_bdm1 ICD BDM interface on lp1
|
|
6 = /dev/icd_bdm2 ICD BDM interface on lp2
|
|
|
|
This device is used for the interfacing to the MC683xx
|
|
microcontrollers via Background Debug Mode by use of a
|
|
Parallel Port interface. PD is the Motorola Public
|
|
Domain Interface and ICD is the commercial interface
|
|
by P&E.
|
|
|
|
53 block Mylex DAC960 PCI RAID controller; sixth controller
|
|
0 = /dev/rd/c5d0 First disk, whole disk
|
|
8 = /dev/rd/c5d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c5d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
54 char Electrocardiognosis Holter serial card
|
|
0 = /dev/holter0 First Holter port
|
|
1 = /dev/holter1 Second Holter port
|
|
2 = /dev/holter2 Third Holter port
|
|
|
|
A custom serial card used by Electrocardiognosis SRL
|
|
<mseritan@ottonel.pub.ro> to transfer data from Holter
|
|
24-hour heart monitoring equipment.
|
|
|
|
54 block Mylex DAC960 PCI RAID controller; seventh controller
|
|
0 = /dev/rd/c6d0 First disk, whole disk
|
|
8 = /dev/rd/c6d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c6d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
55 char DSP56001 digital signal processor
|
|
0 = /dev/dsp56k First DSP56001
|
|
|
|
55 block Mylex DAC960 PCI RAID controller; eighth controller
|
|
0 = /dev/rd/c7d0 First disk, whole disk
|
|
8 = /dev/rd/c7d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c7d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
56 char Apple Desktop Bus
|
|
0 = /dev/adb ADB bus control
|
|
|
|
Additional devices will be added to this number, all
|
|
starting with /dev/adb.
|
|
|
|
56 block Fifth IDE hard disk/CD-ROM interface
|
|
0 = /dev/hdi Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdj Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
57 char Hayes ESP serial card
|
|
0 = /dev/ttyP0 First ESP port
|
|
1 = /dev/ttyP1 Second ESP port
|
|
...
|
|
|
|
57 block Sixth IDE hard disk/CD-ROM interface
|
|
0 = /dev/hdk Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdl Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
58 char Hayes ESP serial card - alternate devices
|
|
0 = /dev/cup0 Callout device for ttyP0
|
|
1 = /dev/cup1 Callout device for ttyP1
|
|
...
|
|
|
|
58 block Reserved for logical volume manager
|
|
|
|
59 char sf firewall package
|
|
0 = /dev/firewall Communication with sf kernel module
|
|
|
|
59 block Generic PDA filesystem device
|
|
0 = /dev/pda0 First PDA device
|
|
1 = /dev/pda1 Second PDA device
|
|
...
|
|
|
|
The pda devices are used to mount filesystems on
|
|
remote pda's (basically slow handheld machines with
|
|
proprietary OS's and limited memory and storage
|
|
running small fs translation drivers) through serial /
|
|
IRDA / parallel links.
|
|
|
|
NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
|
|
|
|
60-63 char LOCAL/EXPERIMENTAL USE
|
|
|
|
60-63 block LOCAL/EXPERIMENTAL USE
|
|
Allocated for local/experimental use. For devices not
|
|
assigned official numbers, these ranges should be
|
|
used in order to avoid conflicting with future assignments.
|
|
|
|
64 char ENskip kernel encryption package
|
|
0 = /dev/enskip Communication with ENskip kernel module
|
|
|
|
64 block Scramdisk/DriveCrypt encrypted devices
|
|
0 = /dev/scramdisk/master Master node for ioctls
|
|
1 = /dev/scramdisk/1 First encrypted device
|
|
2 = /dev/scramdisk/2 Second encrypted device
|
|
...
|
|
255 = /dev/scramdisk/255 255th encrypted device
|
|
|
|
The filename of the encrypted container and the passwords
|
|
are sent via ioctls (using the sdmount tool) to the master
|
|
node which then activates them via one of the
|
|
/dev/scramdisk/x nodes for loop mounting (all handled
|
|
through the sdmount tool).
|
|
|
|
Requested by: andy@scramdisklinux.org
|
|
|
|
65 char Sundance "plink" Transputer boards (obsolete, unused)
|
|
0 = /dev/plink0 First plink device
|
|
1 = /dev/plink1 Second plink device
|
|
2 = /dev/plink2 Third plink device
|
|
3 = /dev/plink3 Fourth plink device
|
|
64 = /dev/rplink0 First plink device, raw
|
|
65 = /dev/rplink1 Second plink device, raw
|
|
66 = /dev/rplink2 Third plink device, raw
|
|
67 = /dev/rplink3 Fourth plink device, raw
|
|
128 = /dev/plink0d First plink device, debug
|
|
129 = /dev/plink1d Second plink device, debug
|
|
130 = /dev/plink2d Third plink device, debug
|
|
131 = /dev/plink3d Fourth plink device, debug
|
|
192 = /dev/rplink0d First plink device, raw, debug
|
|
193 = /dev/rplink1d Second plink device, raw, debug
|
|
194 = /dev/rplink2d Third plink device, raw, debug
|
|
195 = /dev/rplink3d Fourth plink device, raw, debug
|
|
|
|
This is a commercial driver; contact James Howes
|
|
<jth@prosig.demon.co.uk> for information.
|
|
|
|
65 block SCSI disk devices (16-31)
|
|
0 = /dev/sdq 17th SCSI disk whole disk
|
|
16 = /dev/sdr 18th SCSI disk whole disk
|
|
32 = /dev/sds 19th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdaf 32nd SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
66 char YARC PowerPC PCI coprocessor card
|
|
0 = /dev/yppcpci0 First YARC card
|
|
1 = /dev/yppcpci1 Second YARC card
|
|
...
|
|
|
|
66 block SCSI disk devices (32-47)
|
|
0 = /dev/sdag 33th SCSI disk whole disk
|
|
16 = /dev/sdah 34th SCSI disk whole disk
|
|
32 = /dev/sdai 35th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdav 48nd SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
67 char Coda network file system
|
|
0 = /dev/cfs0 Coda cache manager
|
|
|
|
See http://www.coda.cs.cmu.edu for information about Coda.
|
|
|
|
67 block SCSI disk devices (48-63)
|
|
0 = /dev/sdaw 49th SCSI disk whole disk
|
|
16 = /dev/sdax 50th SCSI disk whole disk
|
|
32 = /dev/sday 51st SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdbl 64th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
68 char CAPI 2.0 interface
|
|
0 = /dev/capi20 Control device
|
|
1 = /dev/capi20.00 First CAPI 2.0 application
|
|
2 = /dev/capi20.01 Second CAPI 2.0 application
|
|
...
|
|
20 = /dev/capi20.19 19th CAPI 2.0 application
|
|
|
|
ISDN CAPI 2.0 driver for use with CAPI 2.0
|
|
applications; currently supports the AVM B1 card.
|
|
|
|
68 block SCSI disk devices (64-79)
|
|
0 = /dev/sdbm 65th SCSI disk whole disk
|
|
16 = /dev/sdbn 66th SCSI disk whole disk
|
|
32 = /dev/sdbo 67th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdcb 80th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
69 char MA16 numeric accelerator card
|
|
0 = /dev/ma16 Board memory access
|
|
|
|
69 block SCSI disk devices (80-95)
|
|
0 = /dev/sdcc 81st SCSI disk whole disk
|
|
16 = /dev/sdcd 82nd SCSI disk whole disk
|
|
32 = /dev/sdce 83th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdcr 96th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
70 char SpellCaster Protocol Services Interface
|
|
0 = /dev/apscfg Configuration interface
|
|
1 = /dev/apsauth Authentication interface
|
|
2 = /dev/apslog Logging interface
|
|
3 = /dev/apsdbg Debugging interface
|
|
64 = /dev/apsisdn ISDN command interface
|
|
65 = /dev/apsasync Async command interface
|
|
128 = /dev/apsmon Monitor interface
|
|
|
|
70 block SCSI disk devices (96-111)
|
|
0 = /dev/sdcs 97th SCSI disk whole disk
|
|
16 = /dev/sdct 98th SCSI disk whole disk
|
|
32 = /dev/sdcu 99th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sddh 112nd SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
71 char Computone IntelliPort II serial card
|
|
0 = /dev/ttyF0 IntelliPort II board 0, port 0
|
|
1 = /dev/ttyF1 IntelliPort II board 0, port 1
|
|
...
|
|
63 = /dev/ttyF63 IntelliPort II board 0, port 63
|
|
64 = /dev/ttyF64 IntelliPort II board 1, port 0
|
|
65 = /dev/ttyF65 IntelliPort II board 1, port 1
|
|
...
|
|
127 = /dev/ttyF127 IntelliPort II board 1, port 63
|
|
128 = /dev/ttyF128 IntelliPort II board 2, port 0
|
|
129 = /dev/ttyF129 IntelliPort II board 2, port 1
|
|
...
|
|
191 = /dev/ttyF191 IntelliPort II board 2, port 63
|
|
192 = /dev/ttyF192 IntelliPort II board 3, port 0
|
|
193 = /dev/ttyF193 IntelliPort II board 3, port 1
|
|
...
|
|
255 = /dev/ttyF255 IntelliPort II board 3, port 63
|
|
|
|
71 block SCSI disk devices (112-127)
|
|
0 = /dev/sddi 113th SCSI disk whole disk
|
|
16 = /dev/sddj 114th SCSI disk whole disk
|
|
32 = /dev/sddk 115th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sddx 128th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
72 char Computone IntelliPort II serial card - alternate devices
|
|
0 = /dev/cuf0 Callout device for ttyF0
|
|
1 = /dev/cuf1 Callout device for ttyF1
|
|
...
|
|
63 = /dev/cuf63 Callout device for ttyF63
|
|
64 = /dev/cuf64 Callout device for ttyF64
|
|
65 = /dev/cuf65 Callout device for ttyF65
|
|
...
|
|
127 = /dev/cuf127 Callout device for ttyF127
|
|
128 = /dev/cuf128 Callout device for ttyF128
|
|
129 = /dev/cuf129 Callout device for ttyF129
|
|
...
|
|
191 = /dev/cuf191 Callout device for ttyF191
|
|
192 = /dev/cuf192 Callout device for ttyF192
|
|
193 = /dev/cuf193 Callout device for ttyF193
|
|
...
|
|
255 = /dev/cuf255 Callout device for ttyF255
|
|
|
|
72 block Compaq Intelligent Drive Array, first controller
|
|
0 = /dev/ida/c0d0 First logical drive whole disk
|
|
16 = /dev/ida/c0d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c0d15 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
73 char Computone IntelliPort II serial card - control devices
|
|
0 = /dev/ip2ipl0 Loadware device for board 0
|
|
1 = /dev/ip2stat0 Status device for board 0
|
|
4 = /dev/ip2ipl1 Loadware device for board 1
|
|
5 = /dev/ip2stat1 Status device for board 1
|
|
8 = /dev/ip2ipl2 Loadware device for board 2
|
|
9 = /dev/ip2stat2 Status device for board 2
|
|
12 = /dev/ip2ipl3 Loadware device for board 3
|
|
13 = /dev/ip2stat3 Status device for board 3
|
|
|
|
73 block Compaq Intelligent Drive Array, second controller
|
|
0 = /dev/ida/c1d0 First logical drive whole disk
|
|
16 = /dev/ida/c1d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c1d15 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
74 char SCI bridge
|
|
0 = /dev/SCI/0 SCI device 0
|
|
1 = /dev/SCI/1 SCI device 1
|
|
...
|
|
|
|
Currently for Dolphin Interconnect Solutions' PCI-SCI
|
|
bridge.
|
|
|
|
74 block Compaq Intelligent Drive Array, third controller
|
|
0 = /dev/ida/c2d0 First logical drive whole disk
|
|
16 = /dev/ida/c2d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c2d15 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
75 char Specialix IO8+ serial card
|
|
0 = /dev/ttyW0 First IO8+ port, first card
|
|
1 = /dev/ttyW1 Second IO8+ port, first card
|
|
...
|
|
8 = /dev/ttyW8 First IO8+ port, second card
|
|
...
|
|
|
|
75 block Compaq Intelligent Drive Array, fourth controller
|
|
0 = /dev/ida/c3d0 First logical drive whole disk
|
|
16 = /dev/ida/c3d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c3d15 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
76 char Specialix IO8+ serial card - alternate devices
|
|
0 = /dev/cuw0 Callout device for ttyW0
|
|
1 = /dev/cuw1 Callout device for ttyW1
|
|
...
|
|
8 = /dev/cuw8 Callout device for ttyW8
|
|
...
|
|
|
|
76 block Compaq Intelligent Drive Array, fifth controller
|
|
0 = /dev/ida/c4d0 First logical drive whole disk
|
|
16 = /dev/ida/c4d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c4d15 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
|
|
77 char ComScire Quantum Noise Generator
|
|
0 = /dev/qng ComScire Quantum Noise Generator
|
|
|
|
77 block Compaq Intelligent Drive Array, sixth controller
|
|
0 = /dev/ida/c5d0 First logical drive whole disk
|
|
16 = /dev/ida/c5d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c5d15 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
78 char PAM Software's multimodem boards
|
|
0 = /dev/ttyM0 First PAM modem
|
|
1 = /dev/ttyM1 Second PAM modem
|
|
...
|
|
|
|
78 block Compaq Intelligent Drive Array, seventh controller
|
|
0 = /dev/ida/c6d0 First logical drive whole disk
|
|
16 = /dev/ida/c6d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c6d15 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
79 char PAM Software's multimodem boards - alternate devices
|
|
0 = /dev/cum0 Callout device for ttyM0
|
|
1 = /dev/cum1 Callout device for ttyM1
|
|
...
|
|
|
|
79 block Compaq Intelligent Drive Array, eighth controller
|
|
0 = /dev/ida/c7d0 First logical drive whole disk
|
|
16 = /dev/ida/c7d1 Second logical drive whole disk
|
|
...
|
|
240 = /dev/ida/c715 16th logical drive whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
80 char Photometrics AT200 CCD camera
|
|
0 = /dev/at200 Photometrics AT200 CCD camera
|
|
|
|
80 block I2O hard disk
|
|
0 = /dev/i2o/hda First I2O hard disk, whole disk
|
|
16 = /dev/i2o/hdb Second I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hdp 16th I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
81 char video4linux
|
|
0 = /dev/video0 Video capture/overlay device
|
|
...
|
|
63 = /dev/video63 Video capture/overlay device
|
|
64 = /dev/radio0 Radio device
|
|
...
|
|
127 = /dev/radio63 Radio device
|
|
128 = /dev/swradio0 Software Defined Radio device
|
|
...
|
|
191 = /dev/swradio63 Software Defined Radio device
|
|
224 = /dev/vbi0 Vertical blank interrupt
|
|
...
|
|
255 = /dev/vbi31 Vertical blank interrupt
|
|
|
|
Minor numbers are allocated dynamically unless
|
|
CONFIG_VIDEO_FIXED_MINOR_RANGES (default n)
|
|
configuration option is set.
|
|
|
|
81 block I2O hard disk
|
|
0 = /dev/i2o/hdq 17th I2O hard disk, whole disk
|
|
16 = /dev/i2o/hdr 18th I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hdaf 32nd I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
82 char WiNRADiO communications receiver card
|
|
0 = /dev/winradio0 First WiNRADiO card
|
|
1 = /dev/winradio1 Second WiNRADiO card
|
|
...
|
|
|
|
The driver and documentation may be obtained from
|
|
http://www.winradio.com/
|
|
|
|
82 block I2O hard disk
|
|
0 = /dev/i2o/hdag 33rd I2O hard disk, whole disk
|
|
16 = /dev/i2o/hdah 34th I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hdav 48th I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
83 char Matrox mga_vid video driver
|
|
0 = /dev/mga_vid0 1st video card
|
|
1 = /dev/mga_vid1 2nd video card
|
|
2 = /dev/mga_vid2 3rd video card
|
|
...
|
|
15 = /dev/mga_vid15 16th video card
|
|
|
|
83 block I2O hard disk
|
|
0 = /dev/i2o/hdaw 49th I2O hard disk, whole disk
|
|
16 = /dev/i2o/hdax 50th I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hdbl 64th I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
84 char Ikon 1011[57] Versatec Greensheet Interface
|
|
0 = /dev/ihcp0 First Greensheet port
|
|
1 = /dev/ihcp1 Second Greensheet port
|
|
|
|
84 block I2O hard disk
|
|
0 = /dev/i2o/hdbm 65th I2O hard disk, whole disk
|
|
16 = /dev/i2o/hdbn 66th I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hdcb 80th I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
85 char Linux/SGI shared memory input queue
|
|
0 = /dev/shmiq Master shared input queue
|
|
1 = /dev/qcntl0 First device pushed
|
|
2 = /dev/qcntl1 Second device pushed
|
|
...
|
|
|
|
85 block I2O hard disk
|
|
0 = /dev/i2o/hdcc 81st I2O hard disk, whole disk
|
|
16 = /dev/i2o/hdcd 82nd I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hdcr 96th I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
86 char SCSI media changer
|
|
0 = /dev/sch0 First SCSI media changer
|
|
1 = /dev/sch1 Second SCSI media changer
|
|
...
|
|
|
|
86 block I2O hard disk
|
|
0 = /dev/i2o/hdcs 97th I2O hard disk, whole disk
|
|
16 = /dev/i2o/hdct 98th I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hddh 112th I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
87 char Sony Control-A1 stereo control bus
|
|
0 = /dev/controla0 First device on chain
|
|
1 = /dev/controla1 Second device on chain
|
|
...
|
|
|
|
87 block I2O hard disk
|
|
0 = /dev/i2o/hddi 113rd I2O hard disk, whole disk
|
|
16 = /dev/i2o/hddj 114th I2O hard disk, whole disk
|
|
...
|
|
240 = /dev/i2o/hddx 128th I2O hard disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
88 char COMX synchronous serial card
|
|
0 = /dev/comx0 COMX channel 0
|
|
1 = /dev/comx1 COMX channel 1
|
|
...
|
|
|
|
88 block Seventh IDE hard disk/CD-ROM interface
|
|
0 = /dev/hdm Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdn Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
89 char I2C bus interface
|
|
0 = /dev/i2c-0 First I2C adapter
|
|
1 = /dev/i2c-1 Second I2C adapter
|
|
...
|
|
|
|
89 block Eighth IDE hard disk/CD-ROM interface
|
|
0 = /dev/hdo Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdp Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
90 char Memory Technology Device (RAM, ROM, Flash)
|
|
0 = /dev/mtd0 First MTD (rw)
|
|
1 = /dev/mtdr0 First MTD (ro)
|
|
...
|
|
30 = /dev/mtd15 16th MTD (rw)
|
|
31 = /dev/mtdr15 16th MTD (ro)
|
|
|
|
90 block Ninth IDE hard disk/CD-ROM interface
|
|
0 = /dev/hdq Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdr Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
91 char CAN-Bus devices
|
|
0 = /dev/can0 First CAN-Bus controller
|
|
1 = /dev/can1 Second CAN-Bus controller
|
|
...
|
|
|
|
91 block Tenth IDE hard disk/CD-ROM interface
|
|
0 = /dev/hds Master: whole disk (or CD-ROM)
|
|
64 = /dev/hdt Slave: whole disk (or CD-ROM)
|
|
|
|
Partitions are handled the same way as for the first
|
|
interface (see major number 3).
|
|
|
|
92 char Reserved for ith Kommunikationstechnik MIC ISDN card
|
|
|
|
92 block PPDD encrypted disk driver
|
|
0 = /dev/ppdd0 First encrypted disk
|
|
1 = /dev/ppdd1 Second encrypted disk
|
|
...
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
93 char
|
|
|
|
93 block NAND Flash Translation Layer filesystem
|
|
0 = /dev/nftla First NFTL layer
|
|
16 = /dev/nftlb Second NFTL layer
|
|
...
|
|
240 = /dev/nftlp 16th NTFL layer
|
|
|
|
94 char
|
|
|
|
94 block IBM S/390 DASD block storage
|
|
0 = /dev/dasda First DASD device, major
|
|
1 = /dev/dasda1 First DASD device, block 1
|
|
2 = /dev/dasda2 First DASD device, block 2
|
|
3 = /dev/dasda3 First DASD device, block 3
|
|
4 = /dev/dasdb Second DASD device, major
|
|
5 = /dev/dasdb1 Second DASD device, block 1
|
|
6 = /dev/dasdb2 Second DASD device, block 2
|
|
7 = /dev/dasdb3 Second DASD device, block 3
|
|
...
|
|
|
|
95 char IP filter
|
|
0 = /dev/ipl Filter control device/log file
|
|
1 = /dev/ipnat NAT control device/log file
|
|
2 = /dev/ipstate State information log file
|
|
3 = /dev/ipauth Authentication control device/log file
|
|
...
|
|
|
|
96 char Parallel port ATAPI tape devices
|
|
0 = /dev/pt0 First parallel port ATAPI tape
|
|
1 = /dev/pt1 Second parallel port ATAPI tape
|
|
...
|
|
128 = /dev/npt0 First p.p. ATAPI tape, no rewind
|
|
129 = /dev/npt1 Second p.p. ATAPI tape, no rewind
|
|
...
|
|
|
|
96 block Inverse NAND Flash Translation Layer
|
|
0 = /dev/inftla First INFTL layer
|
|
16 = /dev/inftlb Second INFTL layer
|
|
...
|
|
240 = /dev/inftlp 16th INTFL layer
|
|
|
|
97 char Parallel port generic ATAPI interface
|
|
0 = /dev/pg0 First parallel port ATAPI device
|
|
1 = /dev/pg1 Second parallel port ATAPI device
|
|
2 = /dev/pg2 Third parallel port ATAPI device
|
|
3 = /dev/pg3 Fourth parallel port ATAPI device
|
|
|
|
These devices support the same API as the generic SCSI
|
|
devices.
|
|
|
|
98 char Control and Measurement Device (comedi)
|
|
0 = /dev/comedi0 First comedi device
|
|
1 = /dev/comedi1 Second comedi device
|
|
...
|
|
47 = /dev/comedi47 48th comedi device
|
|
|
|
Minors 48 to 255 are reserved for comedi subdevices with
|
|
pathnames of the form "/dev/comediX_subdY", where "X" is the
|
|
minor number of the associated comedi device and "Y" is the
|
|
subdevice number. These subdevice minors are assigned
|
|
dynamically, so there is no fixed mapping from subdevice
|
|
pathnames to minor numbers.
|
|
|
|
See http://www.comedi.org/ for information about the Comedi
|
|
project.
|
|
|
|
98 block User-mode virtual block device
|
|
0 = /dev/ubda First user-mode block device
|
|
16 = /dev/udbb Second user-mode block device
|
|
...
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
This device is used by the user-mode virtual kernel port.
|
|
|
|
99 char Raw parallel ports
|
|
0 = /dev/parport0 First parallel port
|
|
1 = /dev/parport1 Second parallel port
|
|
...
|
|
|
|
99 block JavaStation flash disk
|
|
0 = /dev/jsfd JavaStation flash disk
|
|
|
|
100 char Telephony for Linux
|
|
0 = /dev/phone0 First telephony device
|
|
1 = /dev/phone1 Second telephony device
|
|
...
|
|
|
|
101 char Motorola DSP 56xxx board
|
|
0 = /dev/mdspstat Status information
|
|
1 = /dev/mdsp1 First DSP board I/O controls
|
|
...
|
|
16 = /dev/mdsp16 16th DSP board I/O controls
|
|
|
|
101 block AMI HyperDisk RAID controller
|
|
0 = /dev/amiraid/ar0 First array whole disk
|
|
16 = /dev/amiraid/ar1 Second array whole disk
|
|
...
|
|
240 = /dev/amiraid/ar15 16th array whole disk
|
|
|
|
For each device, partitions are added as:
|
|
0 = /dev/amiraid/ar? Whole disk
|
|
1 = /dev/amiraid/ar?p1 First partition
|
|
2 = /dev/amiraid/ar?p2 Second partition
|
|
...
|
|
15 = /dev/amiraid/ar?p15 15th partition
|
|
|
|
102 char
|
|
|
|
102 block Compressed block device
|
|
0 = /dev/cbd/a First compressed block device, whole device
|
|
16 = /dev/cbd/b Second compressed block device, whole device
|
|
...
|
|
240 = /dev/cbd/p 16th compressed block device, whole device
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
103 char Arla network file system
|
|
0 = /dev/nnpfs0 First NNPFS device
|
|
1 = /dev/nnpfs1 Second NNPFS device
|
|
|
|
Arla is a free clone of the Andrew File System, AFS.
|
|
The NNPFS device gives user mode filesystem
|
|
implementations a kernel presence for caching and easy
|
|
mounting. For more information about the project,
|
|
write to <arla-drinkers@stacken.kth.se> or see
|
|
http://www.stacken.kth.se/project/arla/
|
|
|
|
103 block Audit device
|
|
0 = /dev/audit Audit device
|
|
|
|
104 char Flash BIOS support
|
|
|
|
104 block Compaq Next Generation Drive Array, first controller
|
|
0 = /dev/cciss/c0d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c0d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c0d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
105 char Comtrol VS-1000 serial controller
|
|
0 = /dev/ttyV0 First VS-1000 port
|
|
1 = /dev/ttyV1 Second VS-1000 port
|
|
...
|
|
|
|
105 block Compaq Next Generation Drive Array, second controller
|
|
0 = /dev/cciss/c1d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c1d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c1d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
106 char Comtrol VS-1000 serial controller - alternate devices
|
|
0 = /dev/cuv0 First VS-1000 port
|
|
1 = /dev/cuv1 Second VS-1000 port
|
|
...
|
|
|
|
106 block Compaq Next Generation Drive Array, third controller
|
|
0 = /dev/cciss/c2d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c2d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c2d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
107 char 3Dfx Voodoo Graphics device
|
|
0 = /dev/3dfx Primary 3Dfx graphics device
|
|
|
|
107 block Compaq Next Generation Drive Array, fourth controller
|
|
0 = /dev/cciss/c3d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c3d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c3d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
108 char Device independent PPP interface
|
|
0 = /dev/ppp Device independent PPP interface
|
|
|
|
108 block Compaq Next Generation Drive Array, fifth controller
|
|
0 = /dev/cciss/c4d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c4d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c4d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
109 char Reserved for logical volume manager
|
|
|
|
109 block Compaq Next Generation Drive Array, sixth controller
|
|
0 = /dev/cciss/c5d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c5d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c5d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
110 char miroMEDIA Surround board
|
|
0 = /dev/srnd0 First miroMEDIA Surround board
|
|
1 = /dev/srnd1 Second miroMEDIA Surround board
|
|
...
|
|
|
|
110 block Compaq Next Generation Drive Array, seventh controller
|
|
0 = /dev/cciss/c6d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c6d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c6d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
111 char
|
|
|
|
111 block Compaq Next Generation Drive Array, eighth controller
|
|
0 = /dev/cciss/c7d0 First logical drive, whole disk
|
|
16 = /dev/cciss/c7d1 Second logical drive, whole disk
|
|
...
|
|
240 = /dev/cciss/c7d15 16th logical drive, whole disk
|
|
|
|
Partitions are handled the same way as for Mylex
|
|
DAC960 (see major number 48) except that the limit on
|
|
partitions is 15.
|
|
|
|
112 char ISI serial card
|
|
0 = /dev/ttyM0 First ISI port
|
|
1 = /dev/ttyM1 Second ISI port
|
|
...
|
|
|
|
There is currently a device-naming conflict between
|
|
these and PAM multimodems (major 78).
|
|
|
|
112 block IBM iSeries virtual disk
|
|
0 = /dev/iseries/vda First virtual disk, whole disk
|
|
8 = /dev/iseries/vdb Second virtual disk, whole disk
|
|
...
|
|
200 = /dev/iseries/vdz 26th virtual disk, whole disk
|
|
208 = /dev/iseries/vdaa 27th virtual disk, whole disk
|
|
...
|
|
248 = /dev/iseries/vdaf 32nd virtual disk, whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 7.
|
|
|
|
113 char ISI serial card - alternate devices
|
|
0 = /dev/cum0 Callout device for ttyM0
|
|
1 = /dev/cum1 Callout device for ttyM1
|
|
...
|
|
|
|
113 block IBM iSeries virtual CD-ROM
|
|
0 = /dev/iseries/vcda First virtual CD-ROM
|
|
1 = /dev/iseries/vcdb Second virtual CD-ROM
|
|
...
|
|
|
|
114 char Picture Elements ISE board
|
|
0 = /dev/ise0 First ISE board
|
|
1 = /dev/ise1 Second ISE board
|
|
...
|
|
128 = /dev/isex0 Control node for first ISE board
|
|
129 = /dev/isex1 Control node for second ISE board
|
|
...
|
|
|
|
The ISE board is an embedded computer, optimized for
|
|
image processing. The /dev/iseN nodes are the general
|
|
I/O access to the board, the /dev/isex0 nodes command
|
|
nodes used to control the board.
|
|
|
|
114 block IDE BIOS powered software RAID interfaces such as the
|
|
Promise Fastrak
|
|
|
|
0 = /dev/ataraid/d0
|
|
1 = /dev/ataraid/d0p1
|
|
2 = /dev/ataraid/d0p2
|
|
...
|
|
16 = /dev/ataraid/d1
|
|
17 = /dev/ataraid/d1p1
|
|
18 = /dev/ataraid/d1p2
|
|
...
|
|
255 = /dev/ataraid/d15p15
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
115 char TI link cable devices (115 was formerly the console driver speaker)
|
|
0 = /dev/tipar0 Parallel cable on first parallel port
|
|
...
|
|
7 = /dev/tipar7 Parallel cable on seventh parallel port
|
|
|
|
8 = /dev/tiser0 Serial cable on first serial port
|
|
...
|
|
15 = /dev/tiser7 Serial cable on seventh serial port
|
|
|
|
16 = /dev/tiusb0 First USB cable
|
|
...
|
|
47 = /dev/tiusb31 32nd USB cable
|
|
|
|
115 block NetWare (NWFS) Devices (0-255)
|
|
|
|
The NWFS (NetWare) devices are used to present a
|
|
collection of NetWare Mirror Groups or NetWare
|
|
Partitions as a logical storage segment for
|
|
use in mounting NetWare volumes. A maximum of
|
|
256 NetWare volumes can be supported in a single
|
|
machine.
|
|
|
|
http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
|
|
|
|
0 = /dev/nwfs/v0 First NetWare (NWFS) Logical Volume
|
|
1 = /dev/nwfs/v1 Second NetWare (NWFS) Logical Volume
|
|
2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
|
|
...
|
|
255 = /dev/nwfs/v255 Last NetWare (NWFS) Logical Volume
|
|
|
|
116 char Advanced Linux Sound Driver (ALSA)
|
|
|
|
116 block MicroMemory battery backed RAM adapter (NVRAM)
|
|
Supports 16 boards, 15 partitions each.
|
|
Requested by neilb at cse.unsw.edu.au.
|
|
|
|
0 = /dev/umem/d0 Whole of first board
|
|
1 = /dev/umem/d0p1 First partition of first board
|
|
2 = /dev/umem/d0p2 Second partition of first board
|
|
15 = /dev/umem/d0p15 15th partition of first board
|
|
|
|
16 = /dev/umem/d1 Whole of second board
|
|
17 = /dev/umem/d1p1 First partition of second board
|
|
...
|
|
255= /dev/umem/d15p15 15th partition of 16th board.
|
|
|
|
117 char COSA/SRP synchronous serial card
|
|
0 = /dev/cosa0c0 1st board, 1st channel
|
|
1 = /dev/cosa0c1 1st board, 2nd channel
|
|
...
|
|
16 = /dev/cosa1c0 2nd board, 1st channel
|
|
17 = /dev/cosa1c1 2nd board, 2nd channel
|
|
...
|
|
|
|
117 block Enterprise Volume Management System (EVMS)
|
|
|
|
The EVMS driver uses a layered, plug-in model to provide
|
|
unparalleled flexibility and extensibility in managing
|
|
storage. This allows for easy expansion or customization
|
|
of various levels of volume management. Requested by
|
|
Mark Peloquin (peloquin at us.ibm.com).
|
|
|
|
Note: EVMS populates and manages all the devnodes in
|
|
/dev/evms.
|
|
|
|
http://sf.net/projects/evms
|
|
|
|
0 = /dev/evms/block_device EVMS block device
|
|
1 = /dev/evms/legacyname1 First EVMS legacy device
|
|
2 = /dev/evms/legacyname2 Second EVMS legacy device
|
|
...
|
|
Both ranges can grow (down or up) until they meet.
|
|
...
|
|
254 = /dev/evms/EVMSname2 Second EVMS native device
|
|
255 = /dev/evms/EVMSname1 First EVMS native device
|
|
|
|
Note: legacyname(s) are derived from the normal legacy
|
|
device names. For example, /dev/hda5 would become
|
|
/dev/evms/hda5.
|
|
|
|
118 char IBM Cryptographic Accelerator
|
|
0 = /dev/ica Virtual interface to all IBM Crypto Accelerators
|
|
1 = /dev/ica0 IBMCA Device 0
|
|
2 = /dev/ica1 IBMCA Device 1
|
|
...
|
|
|
|
119 char VMware virtual network control
|
|
0 = /dev/vnet0 1st virtual network
|
|
1 = /dev/vnet1 2nd virtual network
|
|
...
|
|
|
|
120-127 char LOCAL/EXPERIMENTAL USE
|
|
|
|
120-127 block LOCAL/EXPERIMENTAL USE
|
|
Allocated for local/experimental use. For devices not
|
|
assigned official numbers, these ranges should be
|
|
used in order to avoid conflicting with future assignments.
|
|
|
|
128-135 char Unix98 PTY masters
|
|
|
|
These devices should not have corresponding device
|
|
nodes; instead they should be accessed through the
|
|
/dev/ptmx cloning interface.
|
|
|
|
128 block SCSI disk devices (128-143)
|
|
0 = /dev/sddy 129th SCSI disk whole disk
|
|
16 = /dev/sddz 130th SCSI disk whole disk
|
|
32 = /dev/sdea 131th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sden 144th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
129 block SCSI disk devices (144-159)
|
|
0 = /dev/sdeo 145th SCSI disk whole disk
|
|
16 = /dev/sdep 146th SCSI disk whole disk
|
|
32 = /dev/sdeq 147th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdfd 160th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
130 char (Misc devices)
|
|
|
|
130 block SCSI disk devices (160-175)
|
|
0 = /dev/sdfe 161st SCSI disk whole disk
|
|
16 = /dev/sdff 162nd SCSI disk whole disk
|
|
32 = /dev/sdfg 163rd SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdft 176th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
131 block SCSI disk devices (176-191)
|
|
0 = /dev/sdfu 177th SCSI disk whole disk
|
|
16 = /dev/sdfv 178th SCSI disk whole disk
|
|
32 = /dev/sdfw 179th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdgj 192nd SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
132 block SCSI disk devices (192-207)
|
|
0 = /dev/sdgk 193rd SCSI disk whole disk
|
|
16 = /dev/sdgl 194th SCSI disk whole disk
|
|
32 = /dev/sdgm 195th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdgz 208th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
133 block SCSI disk devices (208-223)
|
|
0 = /dev/sdha 209th SCSI disk whole disk
|
|
16 = /dev/sdhb 210th SCSI disk whole disk
|
|
32 = /dev/sdhc 211th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdhp 224th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
134 block SCSI disk devices (224-239)
|
|
0 = /dev/sdhq 225th SCSI disk whole disk
|
|
16 = /dev/sdhr 226th SCSI disk whole disk
|
|
32 = /dev/sdhs 227th SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdif 240th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
135 block SCSI disk devices (240-255)
|
|
0 = /dev/sdig 241st SCSI disk whole disk
|
|
16 = /dev/sdih 242nd SCSI disk whole disk
|
|
32 = /dev/sdih 243rd SCSI disk whole disk
|
|
...
|
|
240 = /dev/sdiv 256th SCSI disk whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
136-143 char Unix98 PTY slaves
|
|
0 = /dev/pts/0 First Unix98 pseudo-TTY
|
|
1 = /dev/pts/1 Second Unix98 pseudo-TTY
|
|
...
|
|
|
|
These device nodes are automatically generated with
|
|
the proper permissions and modes by mounting the
|
|
devpts filesystem onto /dev/pts with the appropriate
|
|
mount options (distribution dependent, however, on
|
|
*most* distributions the appropriate options are
|
|
"mode=0620,gid=<gid of the "tty" group>".)
|
|
|
|
136 block Mylex DAC960 PCI RAID controller; ninth controller
|
|
0 = /dev/rd/c8d0 First disk, whole disk
|
|
8 = /dev/rd/c8d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c8d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
137 block Mylex DAC960 PCI RAID controller; tenth controller
|
|
0 = /dev/rd/c9d0 First disk, whole disk
|
|
8 = /dev/rd/c9d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c9d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
138 block Mylex DAC960 PCI RAID controller; eleventh controller
|
|
0 = /dev/rd/c10d0 First disk, whole disk
|
|
8 = /dev/rd/c10d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c10d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
139 block Mylex DAC960 PCI RAID controller; twelfth controller
|
|
0 = /dev/rd/c11d0 First disk, whole disk
|
|
8 = /dev/rd/c11d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c11d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
140 block Mylex DAC960 PCI RAID controller; thirteenth controller
|
|
0 = /dev/rd/c12d0 First disk, whole disk
|
|
8 = /dev/rd/c12d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c12d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
141 block Mylex DAC960 PCI RAID controller; fourteenth controller
|
|
0 = /dev/rd/c13d0 First disk, whole disk
|
|
8 = /dev/rd/c13d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c13d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
142 block Mylex DAC960 PCI RAID controller; fifteenth controller
|
|
0 = /dev/rd/c14d0 First disk, whole disk
|
|
8 = /dev/rd/c14d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c14d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
143 block Mylex DAC960 PCI RAID controller; sixteenth controller
|
|
0 = /dev/rd/c15d0 First disk, whole disk
|
|
8 = /dev/rd/c15d1 Second disk, whole disk
|
|
...
|
|
248 = /dev/rd/c15d31 32nd disk, whole disk
|
|
|
|
Partitions are handled as for major 48.
|
|
|
|
144 char Encapsulated PPP
|
|
0 = /dev/pppox0 First PPP over Ethernet
|
|
...
|
|
63 = /dev/pppox63 64th PPP over Ethernet
|
|
|
|
This is primarily used for ADSL.
|
|
|
|
The SST 5136-DN DeviceNet interface driver has been
|
|
relocated to major 183 due to an unfortunate conflict.
|
|
|
|
144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
|
|
0 = mounted device 256
|
|
255 = mounted device 511
|
|
|
|
145 char SAM9407-based soundcard
|
|
0 = /dev/sam0_mixer
|
|
1 = /dev/sam0_sequencer
|
|
2 = /dev/sam0_midi00
|
|
3 = /dev/sam0_dsp
|
|
4 = /dev/sam0_audio
|
|
6 = /dev/sam0_sndstat
|
|
18 = /dev/sam0_midi01
|
|
34 = /dev/sam0_midi02
|
|
50 = /dev/sam0_midi03
|
|
64 = /dev/sam1_mixer
|
|
...
|
|
128 = /dev/sam2_mixer
|
|
...
|
|
192 = /dev/sam3_mixer
|
|
...
|
|
|
|
Device functions match OSS, but offer a number of
|
|
addons, which are sam9407 specific. OSS can be
|
|
operated simultaneously, taking care of the codec.
|
|
|
|
145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
|
|
0 = mounted device 512
|
|
255 = mounted device 767
|
|
|
|
146 char SYSTRAM SCRAMNet mirrored-memory network
|
|
0 = /dev/scramnet0 First SCRAMNet device
|
|
1 = /dev/scramnet1 Second SCRAMNet device
|
|
...
|
|
|
|
146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
|
|
0 = mounted device 768
|
|
255 = mounted device 1023
|
|
|
|
147 char Aureal Semiconductor Vortex Audio device
|
|
0 = /dev/aureal0 First Aureal Vortex
|
|
1 = /dev/aureal1 Second Aureal Vortex
|
|
...
|
|
|
|
147 block Distributed Replicated Block Device (DRBD)
|
|
0 = /dev/drbd0 First DRBD device
|
|
1 = /dev/drbd1 Second DRBD device
|
|
...
|
|
|
|
148 char Technology Concepts serial card
|
|
0 = /dev/ttyT0 First TCL port
|
|
1 = /dev/ttyT1 Second TCL port
|
|
...
|
|
|
|
149 char Technology Concepts serial card - alternate devices
|
|
0 = /dev/cut0 Callout device for ttyT0
|
|
1 = /dev/cut0 Callout device for ttyT1
|
|
...
|
|
|
|
150 char Real-Time Linux FIFOs
|
|
0 = /dev/rtf0 First RTLinux FIFO
|
|
1 = /dev/rtf1 Second RTLinux FIFO
|
|
...
|
|
|
|
151 char DPT I2O SmartRaid V controller
|
|
0 = /dev/dpti0 First DPT I2O adapter
|
|
1 = /dev/dpti1 Second DPT I2O adapter
|
|
...
|
|
|
|
152 char EtherDrive Control Device
|
|
0 = /dev/etherd/ctl Connect/Disconnect an EtherDrive
|
|
1 = /dev/etherd/err Monitor errors
|
|
2 = /dev/etherd/raw Raw AoE packet monitor
|
|
|
|
152 block EtherDrive Block Devices
|
|
0 = /dev/etherd/0 EtherDrive 0
|
|
...
|
|
255 = /dev/etherd/255 EtherDrive 255
|
|
|
|
153 char SPI Bus Interface (sometimes referred to as MicroWire)
|
|
0 = /dev/spi0 First SPI device on the bus
|
|
1 = /dev/spi1 Second SPI device on the bus
|
|
...
|
|
15 = /dev/spi15 Sixteenth SPI device on the bus
|
|
|
|
153 block Enhanced Metadisk RAID (EMD) storage units
|
|
0 = /dev/emd/0 First unit
|
|
1 = /dev/emd/0p1 Partition 1 on First unit
|
|
2 = /dev/emd/0p2 Partition 2 on First unit
|
|
...
|
|
15 = /dev/emd/0p15 Partition 15 on First unit
|
|
|
|
16 = /dev/emd/1 Second unit
|
|
32 = /dev/emd/2 Third unit
|
|
...
|
|
240 = /dev/emd/15 Sixteenth unit
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
154 char Specialix RIO serial card
|
|
0 = /dev/ttySR0 First RIO port
|
|
...
|
|
255 = /dev/ttySR255 256th RIO port
|
|
|
|
155 char Specialix RIO serial card - alternate devices
|
|
0 = /dev/cusr0 Callout device for ttySR0
|
|
...
|
|
255 = /dev/cusr255 Callout device for ttySR255
|
|
|
|
156 char Specialix RIO serial card
|
|
0 = /dev/ttySR256 257th RIO port
|
|
...
|
|
255 = /dev/ttySR511 512th RIO port
|
|
|
|
157 char Specialix RIO serial card - alternate devices
|
|
0 = /dev/cusr256 Callout device for ttySR256
|
|
...
|
|
255 = /dev/cusr511 Callout device for ttySR511
|
|
|
|
158 char Dialogic GammaLink fax driver
|
|
0 = /dev/gfax0 GammaLink channel 0
|
|
1 = /dev/gfax1 GammaLink channel 1
|
|
...
|
|
|
|
159 char RESERVED
|
|
|
|
159 block RESERVED
|
|
|
|
160 char General Purpose Instrument Bus (GPIB)
|
|
0 = /dev/gpib0 First GPIB bus
|
|
1 = /dev/gpib1 Second GPIB bus
|
|
...
|
|
|
|
160 block Carmel 8-port SATA Disks on First Controller
|
|
0 = /dev/carmel/0 SATA disk 0 whole disk
|
|
1 = /dev/carmel/0p1 SATA disk 0 partition 1
|
|
...
|
|
31 = /dev/carmel/0p31 SATA disk 0 partition 31
|
|
|
|
32 = /dev/carmel/1 SATA disk 1 whole disk
|
|
64 = /dev/carmel/2 SATA disk 2 whole disk
|
|
...
|
|
224 = /dev/carmel/7 SATA disk 7 whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 31.
|
|
|
|
161 char IrCOMM devices (IrDA serial/parallel emulation)
|
|
0 = /dev/ircomm0 First IrCOMM device
|
|
1 = /dev/ircomm1 Second IrCOMM device
|
|
...
|
|
16 = /dev/irlpt0 First IrLPT device
|
|
17 = /dev/irlpt1 Second IrLPT device
|
|
...
|
|
|
|
161 block Carmel 8-port SATA Disks on Second Controller
|
|
0 = /dev/carmel/8 SATA disk 8 whole disk
|
|
1 = /dev/carmel/8p1 SATA disk 8 partition 1
|
|
...
|
|
31 = /dev/carmel/8p31 SATA disk 8 partition 31
|
|
|
|
32 = /dev/carmel/9 SATA disk 9 whole disk
|
|
64 = /dev/carmel/10 SATA disk 10 whole disk
|
|
...
|
|
224 = /dev/carmel/15 SATA disk 15 whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 31.
|
|
|
|
162 char Raw block device interface
|
|
0 = /dev/rawctl Raw I/O control device
|
|
1 = /dev/raw/raw1 First raw I/O device
|
|
2 = /dev/raw/raw2 Second raw I/O device
|
|
...
|
|
max minor number of raw device is set by kernel config
|
|
MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
|
|
|
|
163 char
|
|
|
|
164 char Chase Research AT/PCI-Fast serial card
|
|
0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
|
|
...
|
|
15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
|
|
16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
|
|
...
|
|
31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
|
|
32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
|
|
...
|
|
47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
|
|
48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
|
|
...
|
|
63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
|
|
|
|
165 char Chase Research AT/PCI-Fast serial card - alternate devices
|
|
0 = /dev/cuch0 Callout device for ttyCH0
|
|
...
|
|
63 = /dev/cuch63 Callout device for ttyCH63
|
|
|
|
166 char ACM USB modems
|
|
0 = /dev/ttyACM0 First ACM modem
|
|
1 = /dev/ttyACM1 Second ACM modem
|
|
...
|
|
|
|
167 char ACM USB modems - alternate devices
|
|
0 = /dev/cuacm0 Callout device for ttyACM0
|
|
1 = /dev/cuacm1 Callout device for ttyACM1
|
|
...
|
|
|
|
168 char Eracom CSA7000 PCI encryption adaptor
|
|
0 = /dev/ecsa0 First CSA7000
|
|
1 = /dev/ecsa1 Second CSA7000
|
|
...
|
|
|
|
169 char Eracom CSA8000 PCI encryption adaptor
|
|
0 = /dev/ecsa8-0 First CSA8000
|
|
1 = /dev/ecsa8-1 Second CSA8000
|
|
...
|
|
|
|
170 char AMI MegaRAC remote access controller
|
|
0 = /dev/megarac0 First MegaRAC card
|
|
1 = /dev/megarac1 Second MegaRAC card
|
|
...
|
|
|
|
171 char Reserved for IEEE 1394 (Firewire)
|
|
|
|
172 char Moxa Intellio serial card
|
|
0 = /dev/ttyMX0 First Moxa port
|
|
1 = /dev/ttyMX1 Second Moxa port
|
|
...
|
|
127 = /dev/ttyMX127 128th Moxa port
|
|
128 = /dev/moxactl Moxa control port
|
|
|
|
173 char Moxa Intellio serial card - alternate devices
|
|
0 = /dev/cumx0 Callout device for ttyMX0
|
|
1 = /dev/cumx1 Callout device for ttyMX1
|
|
...
|
|
127 = /dev/cumx127 Callout device for ttyMX127
|
|
|
|
174 char SmartIO serial card
|
|
0 = /dev/ttySI0 First SmartIO port
|
|
1 = /dev/ttySI1 Second SmartIO port
|
|
...
|
|
|
|
175 char SmartIO serial card - alternate devices
|
|
0 = /dev/cusi0 Callout device for ttySI0
|
|
1 = /dev/cusi1 Callout device for ttySI1
|
|
...
|
|
|
|
176 char nCipher nFast PCI crypto accelerator
|
|
0 = /dev/nfastpci0 First nFast PCI device
|
|
1 = /dev/nfastpci1 First nFast PCI device
|
|
...
|
|
|
|
177 char TI PCILynx memory spaces
|
|
0 = /dev/pcilynx/aux0 AUX space of first PCILynx card
|
|
...
|
|
15 = /dev/pcilynx/aux15 AUX space of 16th PCILynx card
|
|
16 = /dev/pcilynx/rom0 ROM space of first PCILynx card
|
|
...
|
|
31 = /dev/pcilynx/rom15 ROM space of 16th PCILynx card
|
|
32 = /dev/pcilynx/ram0 RAM space of first PCILynx card
|
|
...
|
|
47 = /dev/pcilynx/ram15 RAM space of 16th PCILynx card
|
|
|
|
178 char Giganet cLAN1xxx virtual interface adapter
|
|
0 = /dev/clanvi0 First cLAN adapter
|
|
1 = /dev/clanvi1 Second cLAN adapter
|
|
...
|
|
|
|
179 block MMC block devices
|
|
0 = /dev/mmcblk0 First SD/MMC card
|
|
1 = /dev/mmcblk0p1 First partition on first MMC card
|
|
8 = /dev/mmcblk1 Second SD/MMC card
|
|
...
|
|
|
|
The start of next SD/MMC card can be configured with
|
|
CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
|
|
time using the mmcblk.perdev_minors option. That would
|
|
bump the offset between each card to be the configured
|
|
value instead of the default 8.
|
|
|
|
179 char CCube DVXChip-based PCI products
|
|
0 = /dev/dvxirq0 First DVX device
|
|
1 = /dev/dvxirq1 Second DVX device
|
|
...
|
|
|
|
180 char USB devices
|
|
0 = /dev/usb/lp0 First USB printer
|
|
...
|
|
15 = /dev/usb/lp15 16th USB printer
|
|
48 = /dev/usb/scanner0 First USB scanner
|
|
...
|
|
63 = /dev/usb/scanner15 16th USB scanner
|
|
64 = /dev/usb/rio500 Diamond Rio 500
|
|
65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
|
|
66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
|
|
96 = /dev/usb/hiddev0 1st USB HID device
|
|
...
|
|
111 = /dev/usb/hiddev15 16th USB HID device
|
|
112 = /dev/usb/auer0 1st auerswald ISDN device
|
|
...
|
|
127 = /dev/usb/auer15 16th auerswald ISDN device
|
|
128 = /dev/usb/brlvgr0 First Braille Voyager device
|
|
...
|
|
131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
|
|
132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
|
|
133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
|
|
...
|
|
140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
|
|
144 = /dev/usb/lcd USB LCD device
|
|
160 = /dev/usb/legousbtower0 1st USB Legotower device
|
|
...
|
|
175 = /dev/usb/legousbtower15 16th USB Legotower device
|
|
176 = /dev/usb/usbtmc1 First USB TMC device
|
|
...
|
|
191 = /dev/usb/usbtmc16 16th USB TMC device
|
|
192 = /dev/usb/yurex1 First USB Yurex device
|
|
...
|
|
209 = /dev/usb/yurex16 16th USB Yurex device
|
|
|
|
180 block USB block devices
|
|
0 = /dev/uba First USB block device
|
|
8 = /dev/ubb Second USB block device
|
|
16 = /dev/ubc Third USB block device
|
|
...
|
|
|
|
181 char Conrad Electronic parallel port radio clocks
|
|
0 = /dev/pcfclock0 First Conrad radio clock
|
|
1 = /dev/pcfclock1 Second Conrad radio clock
|
|
...
|
|
|
|
182 char Picture Elements THR2 binarizer
|
|
0 = /dev/pethr0 First THR2 board
|
|
1 = /dev/pethr1 Second THR2 board
|
|
...
|
|
|
|
183 char SST 5136-DN DeviceNet interface
|
|
0 = /dev/ss5136dn0 First DeviceNet interface
|
|
1 = /dev/ss5136dn1 Second DeviceNet interface
|
|
...
|
|
|
|
This device used to be assigned to major number 144.
|
|
It had to be moved due to an unfortunate conflict.
|
|
|
|
184 char Picture Elements' video simulator/sender
|
|
0 = /dev/pevss0 First sender board
|
|
1 = /dev/pevss1 Second sender board
|
|
...
|
|
|
|
185 char InterMezzo high availability file system
|
|
0 = /dev/intermezzo0 First cache manager
|
|
1 = /dev/intermezzo1 Second cache manager
|
|
...
|
|
|
|
See http://web.archive.org/web/20080115195241/
|
|
http://inter-mezzo.org/index.html
|
|
|
|
186 char Object-based storage control device
|
|
0 = /dev/obd0 First obd control device
|
|
1 = /dev/obd1 Second obd control device
|
|
...
|
|
|
|
See ftp://ftp.lustre.org/pub/obd for code and information.
|
|
|
|
187 char DESkey hardware encryption device
|
|
0 = /dev/deskey0 First DES key
|
|
1 = /dev/deskey1 Second DES key
|
|
...
|
|
|
|
188 char USB serial converters
|
|
0 = /dev/ttyUSB0 First USB serial converter
|
|
1 = /dev/ttyUSB1 Second USB serial converter
|
|
...
|
|
|
|
189 char USB serial converters - alternate devices
|
|
0 = /dev/cuusb0 Callout device for ttyUSB0
|
|
1 = /dev/cuusb1 Callout device for ttyUSB1
|
|
...
|
|
|
|
190 char Kansas City tracker/tuner card
|
|
0 = /dev/kctt0 First KCT/T card
|
|
1 = /dev/kctt1 Second KCT/T card
|
|
...
|
|
|
|
191 char Reserved for PCMCIA
|
|
|
|
192 char Kernel profiling interface
|
|
0 = /dev/profile Profiling control device
|
|
1 = /dev/profile0 Profiling device for CPU 0
|
|
2 = /dev/profile1 Profiling device for CPU 1
|
|
...
|
|
|
|
193 char Kernel event-tracing interface
|
|
0 = /dev/trace Tracing control device
|
|
1 = /dev/trace0 Tracing device for CPU 0
|
|
2 = /dev/trace1 Tracing device for CPU 1
|
|
...
|
|
|
|
194 char linVideoStreams (LINVS)
|
|
0 = /dev/mvideo/status0 Video compression status
|
|
1 = /dev/mvideo/stream0 Video stream
|
|
2 = /dev/mvideo/frame0 Single compressed frame
|
|
3 = /dev/mvideo/rawframe0 Raw uncompressed frame
|
|
4 = /dev/mvideo/codec0 Direct codec access
|
|
5 = /dev/mvideo/video4linux0 Video4Linux compatibility
|
|
|
|
16 = /dev/mvideo/status1 Second device
|
|
...
|
|
32 = /dev/mvideo/status2 Third device
|
|
...
|
|
...
|
|
240 = /dev/mvideo/status15 16th device
|
|
...
|
|
|
|
195 char Nvidia graphics devices
|
|
0 = /dev/nvidia0 First Nvidia card
|
|
1 = /dev/nvidia1 Second Nvidia card
|
|
...
|
|
255 = /dev/nvidiactl Nvidia card control device
|
|
|
|
196 char Tormenta T1 card
|
|
0 = /dev/tor/0 Master control channel for all cards
|
|
1 = /dev/tor/1 First DS0
|
|
2 = /dev/tor/2 Second DS0
|
|
...
|
|
48 = /dev/tor/48 48th DS0
|
|
49 = /dev/tor/49 First pseudo-channel
|
|
50 = /dev/tor/50 Second pseudo-channel
|
|
...
|
|
|
|
197 char OpenTNF tracing facility
|
|
0 = /dev/tnf/t0 Trace 0 data extraction
|
|
1 = /dev/tnf/t1 Trace 1 data extraction
|
|
...
|
|
128 = /dev/tnf/status Tracing facility status
|
|
130 = /dev/tnf/trace Tracing device
|
|
|
|
198 char Total Impact TPMP2 quad coprocessor PCI card
|
|
0 = /dev/tpmp2/0 First card
|
|
1 = /dev/tpmp2/1 Second card
|
|
...
|
|
|
|
199 char Veritas volume manager (VxVM) volumes
|
|
0 = /dev/vx/rdsk/*/* First volume
|
|
1 = /dev/vx/rdsk/*/* Second volume
|
|
...
|
|
|
|
199 block Veritas volume manager (VxVM) volumes
|
|
0 = /dev/vx/dsk/*/* First volume
|
|
1 = /dev/vx/dsk/*/* Second volume
|
|
...
|
|
|
|
The namespace in these directories is maintained by
|
|
the user space VxVM software.
|
|
|
|
200 char Veritas VxVM configuration interface
|
|
0 = /dev/vx/config Configuration access node
|
|
1 = /dev/vx/trace Volume i/o trace access node
|
|
2 = /dev/vx/iod Volume i/o daemon access node
|
|
3 = /dev/vx/info Volume information access node
|
|
4 = /dev/vx/task Volume tasks access node
|
|
5 = /dev/vx/taskmon Volume tasks monitor daemon
|
|
|
|
201 char Veritas VxVM dynamic multipathing driver
|
|
0 = /dev/vx/rdmp/* First multipath device
|
|
1 = /dev/vx/rdmp/* Second multipath device
|
|
...
|
|
201 block Veritas VxVM dynamic multipathing driver
|
|
0 = /dev/vx/dmp/* First multipath device
|
|
1 = /dev/vx/dmp/* Second multipath device
|
|
...
|
|
|
|
The namespace in these directories is maintained by
|
|
the user space VxVM software.
|
|
|
|
202 char CPU model-specific registers
|
|
0 = /dev/cpu/0/msr MSRs on CPU 0
|
|
1 = /dev/cpu/1/msr MSRs on CPU 1
|
|
...
|
|
|
|
202 block Xen Virtual Block Device
|
|
0 = /dev/xvda First Xen VBD whole disk
|
|
16 = /dev/xvdb Second Xen VBD whole disk
|
|
32 = /dev/xvdc Third Xen VBD whole disk
|
|
...
|
|
240 = /dev/xvdp Sixteenth Xen VBD whole disk
|
|
|
|
Partitions are handled in the same way as for IDE
|
|
disks (see major number 3) except that the limit on
|
|
partitions is 15.
|
|
|
|
203 char CPU CPUID information
|
|
0 = /dev/cpu/0/cpuid CPUID on CPU 0
|
|
1 = /dev/cpu/1/cpuid CPUID on CPU 1
|
|
...
|
|
|
|
204 char Low-density serial ports
|
|
0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
|
|
1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
|
|
2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
|
|
3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
|
|
4 = /dev/ttyFB0 Intel Footbridge (ARM)
|
|
5 = /dev/ttySA0 StrongARM builtin serial port 0
|
|
6 = /dev/ttySA1 StrongARM builtin serial port 1
|
|
7 = /dev/ttySA2 StrongARM builtin serial port 2
|
|
8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
|
|
9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
|
|
10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
|
|
11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
|
|
12 = /dev/ttyFW0 Firmware console - port 0
|
|
13 = /dev/ttyFW1 Firmware console - port 1
|
|
14 = /dev/ttyFW2 Firmware console - port 2
|
|
15 = /dev/ttyFW3 Firmware console - port 3
|
|
16 = /dev/ttyAM0 ARM "AMBA" serial port 0
|
|
...
|
|
31 = /dev/ttyAM15 ARM "AMBA" serial port 15
|
|
32 = /dev/ttyDB0 DataBooster serial port 0
|
|
...
|
|
39 = /dev/ttyDB7 DataBooster serial port 7
|
|
40 = /dev/ttySG0 SGI Altix console port
|
|
41 = /dev/ttySMX0 Motorola i.MX - port 0
|
|
42 = /dev/ttySMX1 Motorola i.MX - port 1
|
|
43 = /dev/ttySMX2 Motorola i.MX - port 2
|
|
44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
|
|
45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
|
|
46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
|
|
...
|
|
47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
|
|
50 = /dev/ttyIOC0 Altix serial card
|
|
...
|
|
81 = /dev/ttyIOC31 Altix serial card
|
|
82 = /dev/ttyVR0 NEC VR4100 series SIU
|
|
83 = /dev/ttyVR1 NEC VR4100 series DSIU
|
|
84 = /dev/ttyIOC84 Altix ioc4 serial card
|
|
...
|
|
115 = /dev/ttyIOC115 Altix ioc4 serial card
|
|
116 = /dev/ttySIOC0 Altix ioc3 serial card
|
|
...
|
|
147 = /dev/ttySIOC31 Altix ioc3 serial card
|
|
148 = /dev/ttyPSC0 PPC PSC - port 0
|
|
...
|
|
153 = /dev/ttyPSC5 PPC PSC - port 5
|
|
154 = /dev/ttyAT0 ATMEL serial port 0
|
|
...
|
|
169 = /dev/ttyAT15 ATMEL serial port 15
|
|
170 = /dev/ttyNX0 Hilscher netX serial port 0
|
|
...
|
|
185 = /dev/ttyNX15 Hilscher netX serial port 15
|
|
186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
|
|
187 = /dev/ttyUL0 Xilinx uartlite - port 0
|
|
...
|
|
190 = /dev/ttyUL3 Xilinx uartlite - port 3
|
|
191 = /dev/xvc0 Xen virtual console - port 0
|
|
192 = /dev/ttyPZ0 pmac_zilog - port 0
|
|
...
|
|
195 = /dev/ttyPZ3 pmac_zilog - port 3
|
|
196 = /dev/ttyTX0 TX39/49 serial port 0
|
|
...
|
|
204 = /dev/ttyTX7 TX39/49 serial port 7
|
|
205 = /dev/ttySC0 SC26xx serial port 0
|
|
206 = /dev/ttySC1 SC26xx serial port 1
|
|
207 = /dev/ttySC2 SC26xx serial port 2
|
|
208 = /dev/ttySC3 SC26xx serial port 3
|
|
209 = /dev/ttyMAX0 MAX3100 serial port 0
|
|
210 = /dev/ttyMAX1 MAX3100 serial port 1
|
|
211 = /dev/ttyMAX2 MAX3100 serial port 2
|
|
212 = /dev/ttyMAX3 MAX3100 serial port 3
|
|
|
|
205 char Low-density serial ports (alternate device)
|
|
0 = /dev/culu0 Callout device for ttyLU0
|
|
1 = /dev/culu1 Callout device for ttyLU1
|
|
2 = /dev/culu2 Callout device for ttyLU2
|
|
3 = /dev/culu3 Callout device for ttyLU3
|
|
4 = /dev/cufb0 Callout device for ttyFB0
|
|
5 = /dev/cusa0 Callout device for ttySA0
|
|
6 = /dev/cusa1 Callout device for ttySA1
|
|
7 = /dev/cusa2 Callout device for ttySA2
|
|
8 = /dev/cusc0 Callout device for ttySC0
|
|
9 = /dev/cusc1 Callout device for ttySC1
|
|
10 = /dev/cusc2 Callout device for ttySC2
|
|
11 = /dev/cusc3 Callout device for ttySC3
|
|
12 = /dev/cufw0 Callout device for ttyFW0
|
|
13 = /dev/cufw1 Callout device for ttyFW1
|
|
14 = /dev/cufw2 Callout device for ttyFW2
|
|
15 = /dev/cufw3 Callout device for ttyFW3
|
|
16 = /dev/cuam0 Callout device for ttyAM0
|
|
...
|
|
31 = /dev/cuam15 Callout device for ttyAM15
|
|
32 = /dev/cudb0 Callout device for ttyDB0
|
|
...
|
|
39 = /dev/cudb7 Callout device for ttyDB7
|
|
40 = /dev/cusg0 Callout device for ttySG0
|
|
41 = /dev/ttycusmx0 Callout device for ttySMX0
|
|
42 = /dev/ttycusmx1 Callout device for ttySMX1
|
|
43 = /dev/ttycusmx2 Callout device for ttySMX2
|
|
46 = /dev/cucpm0 Callout device for ttyCPM0
|
|
...
|
|
49 = /dev/cucpm5 Callout device for ttyCPM5
|
|
50 = /dev/cuioc40 Callout device for ttyIOC40
|
|
...
|
|
81 = /dev/cuioc431 Callout device for ttyIOC431
|
|
82 = /dev/cuvr0 Callout device for ttyVR0
|
|
83 = /dev/cuvr1 Callout device for ttyVR1
|
|
|
|
206 char OnStream SC-x0 tape devices
|
|
0 = /dev/osst0 First OnStream SCSI tape, mode 0
|
|
1 = /dev/osst1 Second OnStream SCSI tape, mode 0
|
|
...
|
|
32 = /dev/osst0l First OnStream SCSI tape, mode 1
|
|
33 = /dev/osst1l Second OnStream SCSI tape, mode 1
|
|
...
|
|
64 = /dev/osst0m First OnStream SCSI tape, mode 2
|
|
65 = /dev/osst1m Second OnStream SCSI tape, mode 2
|
|
...
|
|
96 = /dev/osst0a First OnStream SCSI tape, mode 3
|
|
97 = /dev/osst1a Second OnStream SCSI tape, mode 3
|
|
...
|
|
128 = /dev/nosst0 No rewind version of /dev/osst0
|
|
129 = /dev/nosst1 No rewind version of /dev/osst1
|
|
...
|
|
160 = /dev/nosst0l No rewind version of /dev/osst0l
|
|
161 = /dev/nosst1l No rewind version of /dev/osst1l
|
|
...
|
|
192 = /dev/nosst0m No rewind version of /dev/osst0m
|
|
193 = /dev/nosst1m No rewind version of /dev/osst1m
|
|
...
|
|
224 = /dev/nosst0a No rewind version of /dev/osst0a
|
|
225 = /dev/nosst1a No rewind version of /dev/osst1a
|
|
...
|
|
|
|
The OnStream SC-x0 SCSI tapes do not support the
|
|
standard SCSI SASD command set and therefore need
|
|
their own driver "osst". Note that the IDE, USB (and
|
|
maybe ParPort) versions may be driven via ide-scsi or
|
|
usb-storage SCSI emulation and this osst device and
|
|
driver as well. The ADR-x0 drives are QIC-157
|
|
compliant and don't need osst.
|
|
|
|
207 char Compaq ProLiant health feature indicate
|
|
0 = /dev/cpqhealth/cpqw Redirector interface
|
|
1 = /dev/cpqhealth/crom EISA CROM
|
|
2 = /dev/cpqhealth/cdt Data Table
|
|
3 = /dev/cpqhealth/cevt Event Log
|
|
4 = /dev/cpqhealth/casr Automatic Server Recovery
|
|
5 = /dev/cpqhealth/cecc ECC Memory
|
|
6 = /dev/cpqhealth/cmca Machine Check Architecture
|
|
7 = /dev/cpqhealth/ccsm Deprecated CDT
|
|
8 = /dev/cpqhealth/cnmi NMI Handling
|
|
9 = /dev/cpqhealth/css Sideshow Management
|
|
10 = /dev/cpqhealth/cram CMOS interface
|
|
11 = /dev/cpqhealth/cpci PCI IRQ interface
|
|
|
|
208 char User space serial ports
|
|
0 = /dev/ttyU0 First user space serial port
|
|
1 = /dev/ttyU1 Second user space serial port
|
|
...
|
|
|
|
209 char User space serial ports (alternate devices)
|
|
0 = /dev/cuu0 Callout device for ttyU0
|
|
1 = /dev/cuu1 Callout device for ttyU1
|
|
...
|
|
|
|
210 char SBE, Inc. sync/async serial card
|
|
0 = /dev/sbei/wxcfg0 Configuration device for board 0
|
|
1 = /dev/sbei/dld0 Download device for board 0
|
|
2 = /dev/sbei/wan00 WAN device, port 0, board 0
|
|
3 = /dev/sbei/wan01 WAN device, port 1, board 0
|
|
4 = /dev/sbei/wan02 WAN device, port 2, board 0
|
|
5 = /dev/sbei/wan03 WAN device, port 3, board 0
|
|
6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
|
|
7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
|
|
8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
|
|
9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
|
|
10 = /dev/sbei/wxcfg1 Configuration device for board 1
|
|
11 = /dev/sbei/dld1 Download device for board 1
|
|
12 = /dev/sbei/wan10 WAN device, port 0, board 1
|
|
13 = /dev/sbei/wan11 WAN device, port 1, board 1
|
|
14 = /dev/sbei/wan12 WAN device, port 2, board 1
|
|
15 = /dev/sbei/wan13 WAN device, port 3, board 1
|
|
16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
|
|
17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
|
|
18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
|
|
19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
|
|
...
|
|
|
|
Yes, each board is really spaced 10 (decimal) apart.
|
|
|
|
211 char Addinum CPCI1500 digital I/O card
|
|
0 = /dev/addinum/cpci1500/0 First CPCI1500 card
|
|
1 = /dev/addinum/cpci1500/1 Second CPCI1500 card
|
|
...
|
|
|
|
212 char LinuxTV.org DVB driver subsystem
|
|
0 = /dev/dvb/adapter0/video0 first video decoder of first card
|
|
1 = /dev/dvb/adapter0/audio0 first audio decoder of first card
|
|
2 = /dev/dvb/adapter0/sec0 (obsolete/unused)
|
|
3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
|
|
4 = /dev/dvb/adapter0/demux0 first demux device of first card
|
|
5 = /dev/dvb/adapter0/dvr0 first digital video recoder device of first card
|
|
6 = /dev/dvb/adapter0/ca0 first common access port of first card
|
|
7 = /dev/dvb/adapter0/net0 first network device of first card
|
|
8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
|
|
9 = /dev/dvb/adapter0/video1 second video decoder of first card
|
|
...
|
|
64 = /dev/dvb/adapter1/video0 first video decoder of second card
|
|
...
|
|
128 = /dev/dvb/adapter2/video0 first video decoder of third card
|
|
...
|
|
196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
|
|
|
|
216 char Bluetooth RFCOMM TTY devices
|
|
0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
|
|
1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
|
|
...
|
|
|
|
217 char Bluetooth RFCOMM TTY devices (alternate devices)
|
|
0 = /dev/curf0 Callout device for rfcomm0
|
|
1 = /dev/curf1 Callout device for rfcomm1
|
|
...
|
|
|
|
218 char The Logical Company bus Unibus/Qbus adapters
|
|
0 = /dev/logicalco/bci/0 First bus adapter
|
|
1 = /dev/logicalco/bci/1 First bus adapter
|
|
...
|
|
|
|
219 char The Logical Company DCI-1300 digital I/O card
|
|
0 = /dev/logicalco/dci1300/0 First DCI-1300 card
|
|
1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
|
|
...
|
|
|
|
220 char Myricom Myrinet "GM" board
|
|
0 = /dev/myricom/gm0 First Myrinet GM board
|
|
1 = /dev/myricom/gmp0 First board "root access"
|
|
2 = /dev/myricom/gm1 Second Myrinet GM board
|
|
3 = /dev/myricom/gmp1 Second board "root access"
|
|
...
|
|
|
|
221 char VME bus
|
|
0 = /dev/bus/vme/m0 First master image
|
|
1 = /dev/bus/vme/m1 Second master image
|
|
2 = /dev/bus/vme/m2 Third master image
|
|
3 = /dev/bus/vme/m3 Fourth master image
|
|
4 = /dev/bus/vme/s0 First slave image
|
|
5 = /dev/bus/vme/s1 Second slave image
|
|
6 = /dev/bus/vme/s2 Third slave image
|
|
7 = /dev/bus/vme/s3 Fourth slave image
|
|
8 = /dev/bus/vme/ctl Control
|
|
|
|
It is expected that all VME bus drivers will use the
|
|
same interface. For interface documentation see
|
|
http://www.vmelinux.org/.
|
|
|
|
224 char A2232 serial card
|
|
0 = /dev/ttyY0 First A2232 port
|
|
1 = /dev/ttyY1 Second A2232 port
|
|
...
|
|
|
|
225 char A2232 serial card (alternate devices)
|
|
0 = /dev/cuy0 Callout device for ttyY0
|
|
1 = /dev/cuy1 Callout device for ttyY1
|
|
...
|
|
|
|
226 char Direct Rendering Infrastructure (DRI)
|
|
0 = /dev/dri/card0 First graphics card
|
|
1 = /dev/dri/card1 Second graphics card
|
|
...
|
|
|
|
227 char IBM 3270 terminal Unix tty access
|
|
1 = /dev/3270/tty1 First 3270 terminal
|
|
2 = /dev/3270/tty2 Seconds 3270 terminal
|
|
...
|
|
|
|
228 char IBM 3270 terminal block-mode access
|
|
0 = /dev/3270/tub Controlling interface
|
|
1 = /dev/3270/tub1 First 3270 terminal
|
|
2 = /dev/3270/tub2 Second 3270 terminal
|
|
...
|
|
|
|
229 char IBM iSeries/pSeries virtual console
|
|
0 = /dev/hvc0 First console port
|
|
1 = /dev/hvc1 Second console port
|
|
...
|
|
|
|
230 char IBM iSeries virtual tape
|
|
0 = /dev/iseries/vt0 First virtual tape, mode 0
|
|
1 = /dev/iseries/vt1 Second virtual tape, mode 0
|
|
...
|
|
32 = /dev/iseries/vt0l First virtual tape, mode 1
|
|
33 = /dev/iseries/vt1l Second virtual tape, mode 1
|
|
...
|
|
64 = /dev/iseries/vt0m First virtual tape, mode 2
|
|
65 = /dev/iseries/vt1m Second virtual tape, mode 2
|
|
...
|
|
96 = /dev/iseries/vt0a First virtual tape, mode 3
|
|
97 = /dev/iseries/vt1a Second virtual tape, mode 3
|
|
...
|
|
128 = /dev/iseries/nvt0 First virtual tape, mode 0, no rewind
|
|
129 = /dev/iseries/nvt1 Second virtual tape, mode 0, no rewind
|
|
...
|
|
160 = /dev/iseries/nvt0l First virtual tape, mode 1, no rewind
|
|
161 = /dev/iseries/nvt1l Second virtual tape, mode 1, no rewind
|
|
...
|
|
192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
|
|
193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
|
|
...
|
|
224 = /dev/iseries/nvt0a First virtual tape, mode 3, no rewind
|
|
225 = /dev/iseries/nvt1a Second virtual tape, mode 3, no rewind
|
|
...
|
|
|
|
"No rewind" refers to the omission of the default
|
|
automatic rewind on device close. The MTREW or MTOFFL
|
|
ioctl()'s can be used to rewind the tape regardless of
|
|
the device used to access it.
|
|
|
|
231 char InfiniBand
|
|
0 = /dev/infiniband/umad0
|
|
1 = /dev/infiniband/umad1
|
|
...
|
|
63 = /dev/infiniband/umad63 63rd InfiniBandMad device
|
|
64 = /dev/infiniband/issm0 First InfiniBand IsSM device
|
|
65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
|
|
...
|
|
127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
|
|
128 = /dev/infiniband/uverbs0 First InfiniBand verbs device
|
|
129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
|
|
...
|
|
159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
|
|
|
|
232 char Biometric Devices
|
|
0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
|
|
1 = /dev/biometric/sensor0/iris first iris sensor on first device
|
|
2 = /dev/biometric/sensor0/retina first retina sensor on first device
|
|
3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device
|
|
4 = /dev/biometric/sensor0/facial first facial sensor on first device
|
|
5 = /dev/biometric/sensor0/hand first hand sensor on first device
|
|
...
|
|
10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
|
|
...
|
|
20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
|
|
...
|
|
|
|
233 char PathScale InfiniPath interconnect
|
|
0 = /dev/ipath Primary device for programs (any unit)
|
|
1 = /dev/ipath0 Access specifically to unit 0
|
|
2 = /dev/ipath1 Access specifically to unit 1
|
|
...
|
|
4 = /dev/ipath3 Access specifically to unit 3
|
|
129 = /dev/ipath_sma Device used by Subnet Management Agent
|
|
130 = /dev/ipath_diag Device used by diagnostics programs
|
|
|
|
234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
|
|
Character devices that request a dynamic allocation of major number will
|
|
take numbers starting from 254 and downward.
|
|
|
|
240-254 block LOCAL/EXPERIMENTAL USE
|
|
Allocated for local/experimental use. For devices not
|
|
assigned official numbers, these ranges should be
|
|
used in order to avoid conflicting with future assignments.
|
|
|
|
255 char RESERVED
|
|
|
|
255 block RESERVED
|
|
|
|
This major is reserved to assist the expansion to a
|
|
larger number space. No device nodes with this major
|
|
should ever be created on the filesystem.
|
|
(This is probably not true anymore, but I'll leave it
|
|
for now /Torben)
|
|
|
|
---LARGE MAJORS!!!!!---
|
|
|
|
256 char Equinox SST multi-port serial boards
|
|
0 = /dev/ttyEQ0 First serial port on first Equinox SST board
|
|
127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
|
|
128 = /dev/ttyEQ128 First serial port on second Equinox SST board
|
|
...
|
|
1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
|
|
|
|
256 block Resident Flash Disk Flash Translation Layer
|
|
0 = /dev/rfda First RFD FTL layer
|
|
16 = /dev/rfdb Second RFD FTL layer
|
|
...
|
|
240 = /dev/rfdp 16th RFD FTL layer
|
|
|
|
257 char Phoenix Technologies Cryptographic Services Driver
|
|
0 = /dev/ptlsec Crypto Services Driver
|
|
|
|
257 block SSFDC Flash Translation Layer filesystem
|
|
0 = /dev/ssfdca First SSFDC layer
|
|
8 = /dev/ssfdcb Second SSFDC layer
|
|
16 = /dev/ssfdcc Third SSFDC layer
|
|
24 = /dev/ssfdcd 4th SSFDC layer
|
|
32 = /dev/ssfdce 5th SSFDC layer
|
|
40 = /dev/ssfdcf 6th SSFDC layer
|
|
48 = /dev/ssfdcg 7th SSFDC layer
|
|
56 = /dev/ssfdch 8th SSFDC layer
|
|
|
|
258 block ROM/Flash read-only translation layer
|
|
0 = /dev/blockrom0 First ROM card's translation layer interface
|
|
1 = /dev/blockrom1 Second ROM card's translation layer interface
|
|
...
|
|
|
|
259 block Block Extended Major
|
|
Used dynamically to hold additional partition minor
|
|
numbers and allow large numbers of partitions per device
|
|
|
|
259 char FPGA configuration interfaces
|
|
0 = /dev/icap0 First Xilinx internal configuration
|
|
1 = /dev/icap1 Second Xilinx internal configuration
|
|
|
|
260 char OSD (Object-based-device) SCSI Device
|
|
0 = /dev/osd0 First OSD Device
|
|
1 = /dev/osd1 Second OSD Device
|
|
...
|
|
255 = /dev/osd255 256th OSD Device
|
|
|
|
384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
|
|
Character devices that request a dynamic allocation of major
|
|
number will take numbers starting from 511 and downward,
|
|
once the 234-254 range is full.
|