microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/tty/serial
История
Rasmus Villemoes 4508cf76b1 serial: cpm_uart: call cpm_muram_init before registering console 
Christophe reports that powerpc 8xx silently fails to 5.6-rc1. It turns
out I was wrong about nobody relying on the lazy initialization of the
cpm/qe muram in commit b6231ea2b3 (soc: fsl: qe: drop broken lazy
call of cpm_muram_init()).

Rather than reinstating the somewhat dubious lazy call (initializing a
currently held spinlock, and implicitly doing a GFP_KERNEL under that
spinlock), make sure that cpm_muram_init() is called early enough - I
thought the calls from the subsys_initcalls were good enough, but when
used by console drivers, that's obviously not the
case. cpm_muram_init() is safe to call twice (there's an early return
if it is already initialized), so keep the call from cpm_init() - in
case SERIAL_CPM_CONSOLE=n.

Fixes: b6231ea2b3 (soc: fsl: qe: drop broken lazy call of cpm_muram_init())
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200213114342.21712-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 		2020-02-13 12:03:26 -08:00
..
8250 serial: 8250: Check UPF_IRQ_SHARED in advance 2020-02-12 11:56:44 -08:00
cpm_uart serial: cpm_uart: call cpm_muram_init before registering console 2020-02-13 12:03:26 -08:00
jsm tty: add SPDX identifiers to Kconfig and Makefiles 2019-04-04 18:48:43 +02:00
21285.c tty: serial: 21285: stop using the unused[] variable from struct uart_port 2019-12-19 20:10:28 +01:00
Kconfig tty: serial: Kconfig: Allow SERIAL_QCOM_GENI_CONSOLE to be enabled if SERIAL_QCOM_GENI is a module 2020-01-10 14:01:33 +01:00
Makefile {tty: serial, nand: onenand}: samsung: rename to fix build warning 2019-11-18 18:49:11 +01:00
altera_jtaguart.c
…
altera_uart.c
…
amba-pl010.c tty/serial: Migrate amba-pl01* to use has_sysrq 2019-12-18 15:04:44 +01:00
amba-pl011.c tty/serial: Migrate amba-pl01* to use has_sysrq 2019-12-18 15:04:44 +01:00
amba-pl011.h
…
apbuart.c tty/serial: Migrate apbuart to use has_sysrq 2019-12-18 15:04:44 +01:00
apbuart.h
…
ar933x_uart.c serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE 2020-02-10 12:26:44 -08:00
arc_uart.c tty/serial: Migrate arc_uart to use has_sysrq 2019-12-18 15:04:45 +01:00
atmel_serial.c tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode 2020-02-10 12:26:44 -08:00
atmel_serial.h tty/serial: atmel: add ISO7816 support 2018-10-02 13:38:55 -07:00
bcm63xx_uart.c tty/serial: Migrate bcm63xx_uart to use has_sysrq 2019-12-18 15:04:43 +01:00
clps711x.c tty/serial: Migrate clps711x to use has_sysrq 2019-12-18 15:04:46 +01:00
digicolor-usart.c tty/serial: digicolor: Fix digicolor-usart already registered warning 2019-06-10 19:08:31 +02:00
dz.c TTY/Serial driver updates for 5.6-rc1 2020-01-29 10:13:27 -08:00
dz.h
…
earlycon-arm-semihost.c
…
earlycon-riscv-sbi.c tty/serial: use uart_console_write in the RISC-V SBL early console 2019-01-23 15:41:50 -08:00
earlycon.c earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon 2018-05-14 13:41:05 +02:00
efm32-uart.c tty/serial: Migrate efm32-uart to use has_sysrq 2019-12-18 15:04:47 +01:00
fsl_linflexuart.c tty/serial: Migrate fsl_linflexuart to use has_sysrq 2019-12-18 15:04:48 +01:00
fsl_lpuart.c tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP 2020-01-06 20:22:36 +01:00
icom.c tty: serial: Remove call to memset after pci_alloc_consistent 2019-09-04 12:43:44 +02:00
icom.h
…
ifx6x60.c serial: ifx6x60: add missed pm_runtime_disable 2019-11-18 12:47:06 +01:00
ifx6x60.h
…
imx.c tty: serial: imx: setup the correct sg entry for tx dma 2020-02-12 11:55:21 -08:00
ip22zilog.c tty/serial: Migrate ip22zilog to use has_sysrq 2019-12-18 15:04:50 +01:00
ip22zilog.h
…
kgdb_nmi.c tty/serial: kgdb_nmi: use true,false for bool variable 2020-01-14 14:34:04 +01:00
kgdboc.c kgdboc: disable the console lock when in kgdb 2019-07-30 17:39:39 +02:00
lantiq.c remove ioremap_nocache and devm_ioremap_nocache 2020-01-06 09:45:59 +01:00
lpc32xx_hs.c TTY/Serial driver changes for 5.4-rc1 2019-09-18 10:50:47 -07:00
max310x.c serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control 2019-09-05 09:57:44 +02:00
max3100.c
…
mcf.c
…
men_z135_uart.c drivers: mcb: use symbol namespaces 2019-11-03 19:54:53 +01:00
meson_uart.c TTY/Serial driver updates for 5.6-rc1 2020-01-29 10:13:27 -08:00
milbeaut_usio.c tty/serial: Migrate milbeaut_usio to use has_sysrq 2019-12-18 15:04:51 +01:00
mpc52xx_uart.c tty/serial: mpc52xx_uart: Don't zero port->sysrq 2019-12-18 15:04:52 +01:00
mps2-uart.c serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown 2019-01-31 19:34:10 +01:00
msm_serial.c tty: serial: msm_serial: RX SW/FIFO mode fallback 2020-01-14 14:07:51 +01:00
mux.c TTY/Serial driver updates for 5.6-rc1 2020-01-29 10:13:27 -08:00
mvebu-uart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
mxs-auart.c tty/serial: Migrate mxs-auart to use has_sysrq 2019-12-18 15:04:53 +01:00
omap-serial.c tty/serial: Migrate omap-serial to use has_sysrq 2019-12-18 15:04:54 +01:00
owl-uart.c remove ioremap_nocache and devm_ioremap_nocache 2020-01-06 09:45:59 +01:00
pch_uart.c tty/serial: pmac_zilog: Don't check port->sysrq 2019-12-18 15:04:56 +01:00
pic32_uart.c remove ioremap_nocache and devm_ioremap_nocache 2020-01-06 09:45:59 +01:00
pic32_uart.h
…
pmac_zilog.c tty/serial: Migrate pmac_zilog to use has_sysrq 2019-12-18 15:04:56 +01:00
pmac_zilog.h
…
pnx8xxx_uart.c tty/serial: Migrate pnx8xxx_uart to use has_sysrq 2019-12-18 15:04:57 +01:00
pxa.c tty/serial: Migrate pxa to use has_sysrq 2019-12-18 15:04:57 +01:00
qcom_geni_serial.c tty: serial: qcom_geni_serial: Fix RX cancel command failure 2020-02-12 11:57:38 -08:00
rda-uart.c remove ioremap_nocache and devm_ioremap_nocache 2020-01-06 09:45:59 +01:00
rp2.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
sa1100.c tty/serial: Migrate sa1100 to use has_sysrq 2019-12-18 15:04:59 +01:00
samsung_tty.c serial: samsung: Rename Exynos to lowercase 2020-01-06 20:22:33 +01:00
sb1250-duart.c TTY/Serial driver updates for 5.6-rc1 2020-01-29 10:13:27 -08:00
sc16is7xx.c Merge 5.1-rc6 into tty-next 2019-04-21 23:20:08 +02:00
sccnxp.c tty/serial: Migrate sccnxp to use has_sysrq 2019-12-18 15:05:00 +01:00
serial-tegra.c tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started 2020-02-10 12:32:13 -08:00
serial_core.c serial_core: Move sysrq functions from header file 2020-01-10 17:48:02 +01:00
serial_mctrl_gpio.c serial: mctrl_gpio: Check for NULL pointer 2019-10-07 13:21:54 +02:00
serial_mctrl_gpio.h serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib 2019-09-04 12:43:50 +02:00
serial_txx9.c tty/serial: Migrate serial_txx9 to use has_sysrq 2019-12-18 15:05:01 +01:00
sh-sci.c TTY/Serial driver updates for 5.6-rc1 2020-01-29 10:13:27 -08:00
sh-sci.h serial: sh-sci: Support for HSCIF RX sampling point adjustment 2018-04-23 10:08:18 +02:00
sifive.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
sirfsoc_uart.c
…
sirfsoc_uart.h serial: sirf: make register info static 2019-10-10 14:29:44 +02:00
sprd_serial.c Merge 5.5-rc3 into tty-next 2019-12-23 06:59:19 -05:00
st-asc.c tty: st-asc: switch to using devm_gpiod_get() 2020-01-10 14:01:33 +01:00
stm32-usart.c tty/serial: Migrate stm32-usart to use has_sysrq 2019-12-18 15:05:04 +01:00
stm32-usart.h serial: stm32: add support of RX FIFO threshold 2019-06-21 11:17:36 +02:00
suncore.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
sunhv.c tty/serial: Migrate sunhv to use has_sysrq 2019-12-18 15:05:05 +01:00
sunsab.c tty/serial: Migrate sunsab to use has_sysrq 2019-12-18 15:05:05 +01:00
sunsab.h
…
sunsu.c tty/serial: Migrate sunsu to use has_sysrq 2019-12-18 15:05:06 +01:00
sunzilog.c tty/serial: Migrate sunzilog to use has_sysrq 2019-12-18 15:05:08 +01:00
sunzilog.h
…
tegra-tcu.c serial: Add Tegra Combined UART driver 2019-01-30 09:31:31 +01:00
timbuart.c
…
timbuart.h
…
uartlite.c Revert "serial-uartlite: Move the uart register" 2019-11-14 06:29:08 +08:00
ucc_uart.c ARM: SoC-related driver updates 2020-02-08 14:04:19 -08:00
vr41xx_siu.c tty/serial: Migrate vr41xx_siu to use has_sysrq 2019-12-18 15:05:09 +01:00
vt8500_serial.c tty/serial: Migrate vt8500_serial to use has_sysrq 2019-12-18 15:05:09 +01:00
xilinx_uartps.c serial: xilinx_uartps: set_mctrl sets RTS and DTR 2020-01-14 14:34:04 +01:00
zs.c TTY/Serial driver updates for 5.6-rc1 2020-01-29 10:13:27 -08:00
zs.h
…