1402 строки
44 KiB
Plaintext
1402 строки
44 KiB
Plaintext
#
|
|
# Serial device configuration
|
|
#
|
|
# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
|
|
#
|
|
|
|
menu "Serial drivers"
|
|
depends on HAS_IOMEM
|
|
|
|
#
|
|
# The new 8250/16550 serial drivers
|
|
config SERIAL_8250
|
|
tristate "8250/16550 and compatible serial support"
|
|
depends on (BROKEN || !SPARC)
|
|
select SERIAL_CORE
|
|
---help---
|
|
This selects whether you want to include the driver for the standard
|
|
serial ports. The standard answer is Y. People who might say N
|
|
here are those that are setting up dedicated Ethernet WWW/FTP
|
|
servers, or users that have one of the various bus mice instead of a
|
|
serial mouse and don't intend to use their machine's standard serial
|
|
port for anything. (Note that the Cyclades and Stallion multi
|
|
serial port drivers do not need this driver built in for them to
|
|
work.)
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called 8250.
|
|
[WARNING: Do not compile this driver as a module if you are using
|
|
non-standard serial ports, since the configuration information will
|
|
be lost when the driver is unloaded. This limitation may be lifted
|
|
in the future.]
|
|
|
|
BTW1: If you have a mouseman serial mouse which is not recognized by
|
|
the X window system, try running gpm first.
|
|
|
|
BTW2: If you intend to use a software modem (also called Winmodem)
|
|
under Linux, forget it. These modems are crippled and require
|
|
proprietary drivers which are only available under Windows.
|
|
|
|
Most people will say Y or M here, so that they can use serial mice,
|
|
modems and similar devices connecting to the standard serial ports.
|
|
|
|
config SERIAL_8250_CONSOLE
|
|
bool "Console on 8250/16550 and compatible serial port"
|
|
depends on SERIAL_8250=y
|
|
select SERIAL_CORE_CONSOLE
|
|
---help---
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode). This could be useful if some terminal or printer is connected
|
|
to that serial port.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyS1". (Try "man bootparam" or see the documentation of
|
|
your boot loader (grub or lilo or loadlin) about how to pass options
|
|
to the kernel at boot time.)
|
|
|
|
If you don't have a VGA card installed and you say Y here, the
|
|
kernel will automatically use the first serial line, /dev/ttyS0, as
|
|
system console.
|
|
|
|
You can set that using a kernel command line option such as
|
|
"console=uart8250,io,0x3f8,9600n8"
|
|
"console=uart8250,mmio,0xff5e0000,115200n8".
|
|
and it will switch to normal serial console when the corresponding
|
|
port is ready.
|
|
"earlycon=uart8250,io,0x3f8,9600n8"
|
|
"earlycon=uart8250,mmio,0xff5e0000,115200n8".
|
|
it will not only setup early console.
|
|
|
|
If unsure, say N.
|
|
|
|
config FIX_EARLYCON_MEM
|
|
bool
|
|
depends on X86
|
|
default y
|
|
|
|
config SERIAL_8250_GSC
|
|
tristate
|
|
depends on SERIAL_8250 && GSC
|
|
default SERIAL_8250
|
|
|
|
config SERIAL_8250_PCI
|
|
tristate "8250/16550 PCI device support" if EMBEDDED
|
|
depends on SERIAL_8250 && PCI
|
|
default SERIAL_8250
|
|
help
|
|
This builds standard PCI serial support. You may be able to
|
|
disable this feature if you only need legacy serial support.
|
|
Saves about 9K.
|
|
|
|
config SERIAL_8250_PNP
|
|
tristate "8250/16550 PNP device support" if EMBEDDED
|
|
depends on SERIAL_8250 && PNP
|
|
default SERIAL_8250
|
|
help
|
|
This builds standard PNP serial support. You may be able to
|
|
disable this feature if you only need legacy serial support.
|
|
|
|
config SERIAL_8250_HP300
|
|
tristate
|
|
depends on SERIAL_8250 && HP300
|
|
default SERIAL_8250
|
|
|
|
config SERIAL_8250_CS
|
|
tristate "8250/16550 PCMCIA device support"
|
|
depends on PCMCIA && SERIAL_8250
|
|
---help---
|
|
Say Y here to enable support for 16-bit PCMCIA serial devices,
|
|
including serial port cards, modems, and the modem functions of
|
|
multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
|
|
credit-card size devices often used with laptops.)
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called serial_cs.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_8250_NR_UARTS
|
|
int "Maximum number of 8250/16550 serial ports"
|
|
depends on SERIAL_8250
|
|
default "4"
|
|
help
|
|
Set this to the number of serial ports you want the driver
|
|
to support. This includes any ports discovered via ACPI or
|
|
PCI enumeration and any ports that may be added at run-time
|
|
via hot-plug, or any ISA multi-port serial cards.
|
|
|
|
config SERIAL_8250_RUNTIME_UARTS
|
|
int "Number of 8250/16550 serial ports to register at runtime"
|
|
depends on SERIAL_8250
|
|
range 0 SERIAL_8250_NR_UARTS
|
|
default "4"
|
|
help
|
|
Set this to the maximum number of serial ports you want
|
|
the kernel to register at boot time. This can be overridden
|
|
with the module parameter "nr_uarts", or boot-time parameter
|
|
8250.nr_uarts
|
|
|
|
config SERIAL_8250_EXTENDED
|
|
bool "Extended 8250/16550 serial driver options"
|
|
depends on SERIAL_8250
|
|
help
|
|
If you wish to use any non-standard features of the standard "dumb"
|
|
driver, say Y here. This includes HUB6 support, shared serial
|
|
interrupts, special multiport support, support for more than the
|
|
four COM 1/2/3/4 boards, etc.
|
|
|
|
Note that the answer to this question won't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about serial driver options. If unsure, say N.
|
|
|
|
config SERIAL_8250_MANY_PORTS
|
|
bool "Support more than 4 legacy serial ports"
|
|
depends on SERIAL_8250_EXTENDED && !IA64
|
|
help
|
|
Say Y here if you have dumb serial boards other than the four
|
|
standard COM 1/2/3/4 ports. This may happen if you have an AST
|
|
FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
|
|
from <http://www.tldp.org/docs.html#howto>), or other custom
|
|
serial port hardware which acts similar to standard serial port
|
|
hardware. If you only use the standard COM 1/2/3/4 ports, you can
|
|
say N here to save some memory. You can also say Y if you have an
|
|
"intelligent" multiport card such as Cyclades, Digiboards, etc.
|
|
|
|
#
|
|
# Multi-port serial cards
|
|
#
|
|
|
|
config SERIAL_8250_FOURPORT
|
|
tristate "Support Fourport cards"
|
|
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
|
|
help
|
|
Say Y here if you have an AST FourPort serial board.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called 8250_fourport.
|
|
|
|
config SERIAL_8250_ACCENT
|
|
tristate "Support Accent cards"
|
|
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
|
|
help
|
|
Say Y here if you have an Accent Async serial board.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called 8250_accent.
|
|
|
|
config SERIAL_8250_BOCA
|
|
tristate "Support Boca cards"
|
|
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
|
|
help
|
|
Say Y here if you have a Boca serial board. Please read the Boca
|
|
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called 8250_boca.
|
|
|
|
config SERIAL_8250_EXAR_ST16C554
|
|
tristate "Support Exar ST16C554/554D Quad UART"
|
|
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
|
|
help
|
|
The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
|
|
tinkering with your Envoy TU301, or have a machine with this UART,
|
|
say Y here.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called 8250_exar_st16c554.
|
|
|
|
config SERIAL_8250_HUB6
|
|
tristate "Support Hub6 cards"
|
|
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
|
|
help
|
|
Say Y here if you have a HUB6 serial board.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called 8250_hub6.
|
|
|
|
config SERIAL_8250_SHARE_IRQ
|
|
bool "Support for sharing serial interrupts"
|
|
depends on SERIAL_8250_EXTENDED
|
|
help
|
|
Some serial boards have hardware support which allows multiple dumb
|
|
serial ports on the same board to share a single IRQ. To enable
|
|
support for this in the serial driver, say Y here.
|
|
|
|
config SERIAL_8250_DETECT_IRQ
|
|
bool "Autodetect IRQ on standard ports (unsafe)"
|
|
depends on SERIAL_8250_EXTENDED
|
|
help
|
|
Say Y here if you want the kernel to try to guess which IRQ
|
|
to use for your serial port.
|
|
|
|
This is considered unsafe; it is far better to configure the IRQ in
|
|
a boot script using the setserial command.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_8250_RSA
|
|
bool "Support RSA serial ports"
|
|
depends on SERIAL_8250_EXTENDED
|
|
help
|
|
::: To be written :::
|
|
|
|
config SERIAL_8250_MCA
|
|
tristate "Support 8250-type ports on MCA buses"
|
|
depends on SERIAL_8250 != n && MCA
|
|
help
|
|
Say Y here if you have a MCA serial ports.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called 8250_mca.
|
|
|
|
config SERIAL_8250_ACORN
|
|
tristate "Acorn expansion card serial port support"
|
|
depends on ARCH_ACORN && SERIAL_8250
|
|
help
|
|
If you have an Atomwide Serial card or Serial Port card for an Acorn
|
|
system, say Y to this option. The driver can handle 1, 2, or 3 port
|
|
cards. If unsure, say N.
|
|
|
|
config SERIAL_8250_AU1X00
|
|
bool "Au1x00 serial port support"
|
|
depends on SERIAL_8250 != n && SOC_AU1X00
|
|
help
|
|
If you have an Au1x00 SOC based board and want to use the serial port,
|
|
say Y to this option. The driver can handle up to 4 serial ports,
|
|
depending on the SOC. If unsure, say N.
|
|
|
|
config SERIAL_8250_RM9K
|
|
bool "Support for MIPS RM9xxx integrated serial port"
|
|
depends on SERIAL_8250 != n && SERIAL_RM9000
|
|
select SERIAL_8250_SHARE_IRQ
|
|
help
|
|
Selecting this option will add support for the integrated serial
|
|
port hardware found on MIPS RM9122 and similar processors.
|
|
If unsure, say N.
|
|
|
|
comment "Non-8250 serial port support"
|
|
|
|
config SERIAL_AMBA_PL010
|
|
tristate "ARM AMBA PL010 serial port support"
|
|
depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
|
|
select SERIAL_CORE
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
|
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
|
Cirrus Logic EP93xx CPU, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_AMBA_PL010_CONSOLE
|
|
bool "Support for console on AMBA serial port"
|
|
depends on SERIAL_AMBA_PL010=y
|
|
select SERIAL_CORE_CONSOLE
|
|
---help---
|
|
Say Y here if you wish to use an AMBA PrimeCell UART as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
Even if you say Y here, the currently visible framebuffer console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyAM0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_AMBA_PL011
|
|
tristate "ARM AMBA PL011 serial port support"
|
|
depends on ARM_AMBA
|
|
select SERIAL_CORE
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
|
|
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
|
|
here.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_AMBA_PL011_CONSOLE
|
|
bool "Support for console on AMBA serial port"
|
|
depends on SERIAL_AMBA_PL011=y
|
|
select SERIAL_CORE_CONSOLE
|
|
---help---
|
|
Say Y here if you wish to use an AMBA PrimeCell UART as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
Even if you say Y here, the currently visible framebuffer console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyAMA0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_SB1250_DUART
|
|
tristate "BCM1xxx on-chip DUART serial support"
|
|
depends on SIBYTE_SB1xxx_SOC=y
|
|
select SERIAL_CORE
|
|
default y
|
|
---help---
|
|
Support for the asynchronous serial interface (DUART) included in
|
|
the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
|
|
the letter D in DUART stands for "dual", which is how the device
|
|
is implemented. Depending on the SOC configuration there may be
|
|
one or more DUARTs available of which all are handled.
|
|
|
|
If unsure, say Y. To compile this driver as a module, choose M here:
|
|
the module will be called sb1250-duart.
|
|
|
|
config SERIAL_SB1250_DUART_CONSOLE
|
|
bool "Support for console on a BCM1xxx DUART serial port"
|
|
depends on SERIAL_SB1250_DUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
---help---
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode).
|
|
|
|
If unsure, say Y.
|
|
|
|
config SERIAL_ATMEL
|
|
bool "AT91 / AT32 on-chip serial port support"
|
|
depends on (ARM && ARCH_AT91) || AVR32
|
|
select SERIAL_CORE
|
|
help
|
|
This enables the driver for the on-chip UARTs of the Atmel
|
|
AT91 and AT32 processors.
|
|
|
|
config SERIAL_ATMEL_CONSOLE
|
|
bool "Support for console on AT91 / AT32 serial port"
|
|
depends on SERIAL_ATMEL=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use an on-chip UART on a Atmel
|
|
AT91 or AT32 processor as the system console (the system
|
|
console is the device which receives all kernel messages and
|
|
warnings and which allows logins in single user mode).
|
|
|
|
config SERIAL_ATMEL_PDC
|
|
bool "Support DMA transfers on AT91 / AT32 serial port"
|
|
depends on SERIAL_ATMEL
|
|
default y
|
|
help
|
|
Say Y here if you wish to use the PDC to do DMA transfers to
|
|
and from the Atmel AT91 / AT32 serial port. In order to
|
|
actually use DMA transfers, make sure that the use_dma_tx
|
|
and use_dma_rx members in the atmel_uart_data struct is set
|
|
appropriately for each port.
|
|
|
|
Note that break and error handling currently doesn't work
|
|
properly when DMA is enabled. Make sure that ports where
|
|
this matters don't use DMA.
|
|
|
|
config SERIAL_ATMEL_TTYAT
|
|
bool "Install as device ttyATn instead of ttySn"
|
|
depends on SERIAL_ATMEL=y
|
|
help
|
|
Say Y here if you wish to have the internal AT91 / AT32 UARTs
|
|
appear as /dev/ttyATn (major 204, minor starting at 154)
|
|
instead of the normal /dev/ttySn (major 4, minor starting at
|
|
64). This is necessary if you also want other UARTs, such as
|
|
external 8250/16C550 compatible UARTs.
|
|
The ttySn nodes are legally reserved for the 8250 serial driver
|
|
but are often misused by other serial drivers.
|
|
|
|
To use this, you should create suitable ttyATn device nodes in
|
|
/dev/, and pass "console=ttyATn" to the kernel.
|
|
|
|
Say Y if you have an external 8250/16C550 UART. If unsure, say N.
|
|
|
|
config SERIAL_KS8695
|
|
bool "Micrel KS8695 (Centaur) serial port support"
|
|
depends on ARCH_KS8695
|
|
select SERIAL_CORE
|
|
help
|
|
This selects the Micrel Centaur KS8695 UART. Say Y here.
|
|
|
|
config SERIAL_KS8695_CONSOLE
|
|
bool "Support for console on KS8695 (Centaur) serial port"
|
|
depends on SERIAL_KS8695=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use a KS8695 (Centaur) UART as the
|
|
system console (the system console is the device which
|
|
receives all kernel messages and warnings and which allows
|
|
logins in single user mode).
|
|
|
|
config SERIAL_CLPS711X
|
|
tristate "CLPS711X serial port support"
|
|
depends on ARM && ARCH_CLPS711X
|
|
select SERIAL_CORE
|
|
help
|
|
::: To be written :::
|
|
|
|
config SERIAL_CLPS711X_CONSOLE
|
|
bool "Support for console on CLPS711X serial port"
|
|
depends on SERIAL_CLPS711X=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyCL1". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_S3C2410
|
|
tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
|
|
depends on ARM && ARCH_S3C2410
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
|
|
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
|
|
provide all of these ports, depending on how the serial port
|
|
pins are configured.
|
|
|
|
Currently this driver supports the UARTS on the S3C2410, S3C2440,
|
|
S3C2442, S3C2412 and S3C2413 CPUs.
|
|
|
|
config SERIAL_S3C2410_CONSOLE
|
|
bool "Support for console on S3C2410 serial port"
|
|
depends on SERIAL_S3C2410=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Allow selection of the S3C24XX on-board serial ports for use as
|
|
an virtual console.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySACx". (Try "man bootparam" or see the documentation of
|
|
your boot loader about how to pass options to the kernel at
|
|
boot time.)
|
|
|
|
config SERIAL_DZ
|
|
bool "DECstation DZ serial driver"
|
|
depends on MACH_DECSTATION && 32BIT
|
|
select SERIAL_CORE
|
|
default y
|
|
---help---
|
|
DZ11-family serial controllers for DECstations and VAXstations,
|
|
including the DC7085, M7814, and M7819.
|
|
|
|
config SERIAL_DZ_CONSOLE
|
|
bool "Support console on DECstation DZ serial driver"
|
|
depends on SERIAL_DZ=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
---help---
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode).
|
|
|
|
Note that the firmware uses ttyS3 as the serial console on
|
|
DECstations that use this driver.
|
|
|
|
If unsure, say Y.
|
|
|
|
config SERIAL_ZS
|
|
tristate "DECstation Z85C30 serial support"
|
|
depends on MACH_DECSTATION
|
|
select SERIAL_CORE
|
|
default y
|
|
---help---
|
|
Support for the Zilog 85C350 serial communications controller used
|
|
for serial ports in newer DECstation systems. These include the
|
|
DECsystem 5900 and all models of the DECstation and DECsystem 5000
|
|
systems except from model 200.
|
|
|
|
If unsure, say Y. To compile this driver as a module, choose M here:
|
|
the module will be called zs.
|
|
|
|
config SERIAL_ZS_CONSOLE
|
|
bool "Support for console on a DECstation Z85C30 serial port"
|
|
depends on SERIAL_ZS=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
---help---
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode).
|
|
|
|
Note that the firmware uses ttyS1 as the serial console on the
|
|
Maxine and ttyS3 on the others using this driver.
|
|
|
|
If unsure, say Y.
|
|
|
|
config SERIAL_21285
|
|
tristate "DC21285 serial port support"
|
|
depends on ARM && FOOTBRIDGE
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
|
|
PCI bridge you can enable its onboard serial port by enabling this
|
|
option.
|
|
|
|
config SERIAL_21285_CONSOLE
|
|
bool "Console on DC21285 serial port"
|
|
depends on SERIAL_21285=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the 21285 footbridge you can
|
|
make it the console by answering Y to this option.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyFB". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_MPSC
|
|
bool "Marvell MPSC serial port support"
|
|
depends on PPC32 && MV64X60
|
|
select SERIAL_CORE
|
|
help
|
|
Say Y here if you want to use the Marvell MPSC serial controller.
|
|
|
|
config SERIAL_MPSC_CONSOLE
|
|
bool "Support for console on Marvell MPSC serial port"
|
|
depends on SERIAL_MPSC
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you want to support a serial console on a Marvell MPSC.
|
|
|
|
config SERIAL_PXA
|
|
bool "PXA serial port support"
|
|
depends on ARM && ARCH_PXA
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a machine based on an Intel XScale PXA2xx CPU you
|
|
can enable its onboard serial ports by enabling this option.
|
|
|
|
config SERIAL_PXA_CONSOLE
|
|
bool "Console on PXA serial port"
|
|
depends on SERIAL_PXA
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the Intel XScale PXA
|
|
CPU you can make it the console by answering Y to this option.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_SA1100
|
|
bool "SA1100 serial port support"
|
|
depends on ARM && ARCH_SA1100
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
|
|
can enable its onboard serial port by enabling this option.
|
|
Please read <file:Documentation/arm/SA1100/serial_UART> for further
|
|
info.
|
|
|
|
config SERIAL_SA1100_CONSOLE
|
|
bool "Console on SA1100 serial port"
|
|
depends on SERIAL_SA1100
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the SA1100/SA1110 StrongARM
|
|
CPU you can make it the console by answering Y to this option.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_BFIN
|
|
tristate "Blackfin serial port support"
|
|
depends on BLACKFIN
|
|
select SERIAL_CORE
|
|
select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
|
|
help
|
|
Add support for the built-in UARTs on the Blackfin.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bfin_5xx.
|
|
|
|
config SERIAL_BFIN_CONSOLE
|
|
bool "Console on Blackfin serial port"
|
|
depends on SERIAL_BFIN=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
choice
|
|
prompt "UART Mode"
|
|
depends on SERIAL_BFIN
|
|
default SERIAL_BFIN_DMA
|
|
help
|
|
This driver supports the built-in serial ports of the Blackfin family
|
|
of CPUs
|
|
|
|
config SERIAL_BFIN_DMA
|
|
bool "DMA mode"
|
|
depends on !DMA_UNCACHED_NONE && !KGDB_UART
|
|
help
|
|
This driver works under DMA mode. If this option is selected, the
|
|
blackfin simple dma driver is also enabled.
|
|
|
|
config SERIAL_BFIN_PIO
|
|
bool "PIO mode"
|
|
help
|
|
This driver works under PIO mode.
|
|
|
|
endchoice
|
|
|
|
config SERIAL_BFIN_UART0
|
|
bool "Enable UART0"
|
|
depends on SERIAL_BFIN
|
|
help
|
|
Enable UART0
|
|
|
|
config BFIN_UART0_CTSRTS
|
|
bool "Enable UART0 hardware flow control"
|
|
depends on SERIAL_BFIN_UART0
|
|
help
|
|
Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
|
|
signal.
|
|
|
|
config UART0_CTS_PIN
|
|
int "UART0 CTS pin"
|
|
depends on BFIN_UART0_CTSRTS
|
|
default 23
|
|
help
|
|
The default pin is GPIO_GP7.
|
|
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
|
|
|
|
config UART0_RTS_PIN
|
|
int "UART0 RTS pin"
|
|
depends on BFIN_UART0_CTSRTS
|
|
default 22
|
|
help
|
|
The default pin is GPIO_GP6.
|
|
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
|
|
|
|
config SERIAL_BFIN_UART1
|
|
bool "Enable UART1"
|
|
depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
|
|
help
|
|
Enable UART1
|
|
|
|
config BFIN_UART1_CTSRTS
|
|
bool "Enable UART1 hardware flow control"
|
|
depends on SERIAL_BFIN_UART1
|
|
help
|
|
Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
|
|
signal.
|
|
|
|
config UART1_CTS_PIN
|
|
int "UART1 CTS pin"
|
|
depends on BFIN_UART1_CTSRTS && !BF54x
|
|
default -1
|
|
help
|
|
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
|
|
|
|
config UART1_RTS_PIN
|
|
int "UART1 RTS pin"
|
|
depends on BFIN_UART1_CTSRTS && !BF54x
|
|
default -1
|
|
help
|
|
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
|
|
|
|
config SERIAL_BFIN_UART2
|
|
bool "Enable UART2"
|
|
depends on SERIAL_BFIN && (BF54x)
|
|
help
|
|
Enable UART2
|
|
|
|
config BFIN_UART2_CTSRTS
|
|
bool "Enable UART2 hardware flow control"
|
|
depends on SERIAL_BFIN_UART2
|
|
help
|
|
Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
|
|
signal.
|
|
|
|
config UART2_CTS_PIN
|
|
int "UART2 CTS pin"
|
|
depends on BFIN_UART2_CTSRTS
|
|
default -1
|
|
help
|
|
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
|
|
|
|
config UART2_RTS_PIN
|
|
int "UART2 RTS pin"
|
|
depends on BFIN_UART2_CTSRTS
|
|
default -1
|
|
help
|
|
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
|
|
|
|
config SERIAL_BFIN_UART3
|
|
bool "Enable UART3"
|
|
depends on SERIAL_BFIN && (BF54x)
|
|
help
|
|
Enable UART3
|
|
|
|
config BFIN_UART3_CTSRTS
|
|
bool "Enable UART3 hardware flow control"
|
|
depends on SERIAL_BFIN_UART3
|
|
help
|
|
Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
|
|
signal.
|
|
|
|
config SERIAL_IMX
|
|
bool "IMX serial port support"
|
|
depends on ARM && ARCH_IMX
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a machine based on a Motorola IMX CPU you
|
|
can enable its onboard serial port by enabling this option.
|
|
|
|
config SERIAL_IMX_CONSOLE
|
|
bool "Console on IMX serial port"
|
|
depends on SERIAL_IMX
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the Motorola IMX
|
|
CPU you can make it the console by answering Y to this option.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_UARTLITE
|
|
tristate "Xilinx uartlite serial port support"
|
|
depends on PPC32
|
|
select SERIAL_CORE
|
|
help
|
|
Say Y here if you want to use the Xilinx uartlite serial controller.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called uartlite.ko.
|
|
|
|
config SERIAL_UARTLITE_CONSOLE
|
|
bool "Support for console on Xilinx uartlite serial port"
|
|
depends on SERIAL_UARTLITE=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use a Xilinx uartlite as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
config SERIAL_SUNCORE
|
|
bool
|
|
depends on SPARC
|
|
select SERIAL_CORE
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
|
|
config SERIAL_SUNZILOG
|
|
tristate "Sun Zilog8530 serial support"
|
|
depends on SPARC
|
|
help
|
|
This driver supports the Zilog8530 serial ports found on many Sparc
|
|
systems. Say Y or M if you want to be able to these serial ports.
|
|
|
|
config SERIAL_SUNZILOG_CONSOLE
|
|
bool "Console on Sun Zilog8530 serial port"
|
|
depends on SERIAL_SUNZILOG=y
|
|
help
|
|
If you would like to be able to use the Zilog8530 serial port
|
|
on your Sparc system as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_SUNSU
|
|
tristate "Sun SU serial support"
|
|
depends on SPARC && PCI
|
|
help
|
|
This driver supports the 8250 serial ports that run the keyboard and
|
|
mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
|
|
to these serial ports.
|
|
|
|
config SERIAL_SUNSU_CONSOLE
|
|
bool "Console on Sun SU serial port"
|
|
depends on SERIAL_SUNSU=y
|
|
help
|
|
If you would like to be able to use the SU serial port
|
|
on your Sparc system as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_MUX
|
|
tristate "Serial MUX support"
|
|
depends on GSC
|
|
select SERIAL_CORE
|
|
default y
|
|
---help---
|
|
Saying Y here will enable the hardware MUX serial driver for
|
|
the Nova, K class systems and D class with a 'remote control card'.
|
|
The hardware MUX is not 8250/16550 compatible therefore the
|
|
/dev/ttyB0 device is shared between the Serial MUX and the PDC
|
|
software console. The following steps need to be completed to use
|
|
the Serial MUX:
|
|
|
|
1. create the device entry (mknod /dev/ttyB0 c 11 0)
|
|
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
|
|
3. Add device ttyB0 to /etc/securetty (if you want to log on as
|
|
root on this console.)
|
|
4. Change the kernel command console parameter to: console=ttyB0
|
|
|
|
config SERIAL_MUX_CONSOLE
|
|
bool "Support for console on serial MUX"
|
|
depends on SERIAL_MUX=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
|
|
config PDC_CONSOLE
|
|
bool "PDC software console support"
|
|
depends on PARISC && !SERIAL_MUX && VT
|
|
default n
|
|
help
|
|
Saying Y here will enable the software based PDC console to be
|
|
used as the system console. This is useful for machines in
|
|
which the hardware based console has not been written yet. The
|
|
following steps must be competed to use the PDC console:
|
|
|
|
1. create the device entry (mknod /dev/ttyB0 c 11 0)
|
|
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
|
|
3. Add device ttyB0 to /etc/securetty (if you want to log on as
|
|
root on this console.)
|
|
4. Change the kernel command console parameter to: console=ttyB0
|
|
|
|
config SERIAL_SUNSAB
|
|
tristate "Sun Siemens SAB82532 serial support"
|
|
depends on SPARC && PCI
|
|
help
|
|
This driver supports the Siemens SAB82532 DUSCC serial ports on newer
|
|
(PCI) UltraSPARC systems. Say Y or M if you want to be able to these
|
|
serial ports.
|
|
|
|
config SERIAL_SUNSAB_CONSOLE
|
|
bool "Console on Sun Siemens SAB82532 serial port"
|
|
depends on SERIAL_SUNSAB=y
|
|
help
|
|
If you would like to be able to use the SAB82532 serial port
|
|
on your Sparc system as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_SUNHV
|
|
bool "Sun4v Hypervisor Console support"
|
|
depends on SPARC64
|
|
help
|
|
This driver supports the console device found on SUN4V Sparc
|
|
systems. Say Y if you want to be able to use this device.
|
|
|
|
config SERIAL_IP22_ZILOG
|
|
tristate "SGI Zilog8530 serial support"
|
|
depends on SGI_HAS_ZILOG
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Zilog8530 serial ports found on SGI
|
|
systems. Say Y or M if you want to be able to these serial ports.
|
|
|
|
config SERIAL_IP22_ZILOG_CONSOLE
|
|
bool "Console on SGI Zilog8530 serial port"
|
|
depends on SERIAL_IP22_ZILOG=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config V850E_UART
|
|
bool "NEC V850E on-chip UART support"
|
|
depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
|
|
select SERIAL_CORE
|
|
default y
|
|
|
|
config V850E_UARTB
|
|
bool
|
|
depends on V850E_UART && V850E_ME2
|
|
default y
|
|
|
|
config V850E_UART_CONSOLE
|
|
bool "Use NEC V850E on-chip UART for console"
|
|
depends on V850E_UART
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config SERIAL_SH_SCI
|
|
tristate "SuperH SCI(F) serial port support"
|
|
depends on SUPERH || H8300
|
|
select SERIAL_CORE
|
|
|
|
config SERIAL_SH_SCI_NR_UARTS
|
|
int "Maximum number of SCI(F) serial ports"
|
|
depends on SERIAL_SH_SCI
|
|
default "2"
|
|
|
|
config SERIAL_SH_SCI_CONSOLE
|
|
bool "Support for console on SuperH SCI(F)"
|
|
depends on SERIAL_SH_SCI=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config SERIAL_PNX8XXX
|
|
bool "Enable PNX8XXX SoCs' UART Support"
|
|
depends on MIPS && SOC_PNX8550
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
|
|
and you want to use serial ports, say Y. Otherwise, say N.
|
|
|
|
config SERIAL_PNX8XXX_CONSOLE
|
|
bool "Enable PNX8XX0 serial console"
|
|
depends on SERIAL_PNX8XXX
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
|
|
and you want to use serial console, say Y. Otherwise, say N.
|
|
|
|
config SERIAL_CORE
|
|
tristate
|
|
|
|
config SERIAL_CORE_CONSOLE
|
|
bool
|
|
|
|
config CONSOLE_POLL
|
|
bool
|
|
|
|
config SERIAL_68328
|
|
bool "68328 serial support"
|
|
depends on M68328 || M68EZ328 || M68VZ328
|
|
help
|
|
This driver supports the built-in serial port of the Motorola 68328
|
|
(standard, EZ and VZ varieties).
|
|
|
|
config SERIAL_68328_RTS_CTS
|
|
bool "Support RTS/CTS on 68328 serial port"
|
|
depends on SERIAL_68328
|
|
|
|
config SERIAL_COLDFIRE
|
|
bool "ColdFire serial support"
|
|
depends on COLDFIRE
|
|
help
|
|
This driver supports the built-in serial ports of the Motorola ColdFire
|
|
family of CPUs.
|
|
|
|
config SERIAL_MCF
|
|
bool "Coldfire serial support (new style driver)"
|
|
depends on COLDFIRE
|
|
select SERIAL_CORE
|
|
help
|
|
This new serial driver supports the Freescale Coldfire serial ports
|
|
using the new serial driver subsystem.
|
|
|
|
config SERIAL_MCF_BAUDRATE
|
|
int "Default baudrate for Coldfire serial ports"
|
|
depends on SERIAL_MCF
|
|
default 19200
|
|
help
|
|
This setting lets you define what the default baudrate is for the
|
|
ColdFire serial ports. The usual default varies from board to board,
|
|
and this setting is a way of catering for that.
|
|
|
|
config SERIAL_MCF_CONSOLE
|
|
bool "Coldfire serial console support"
|
|
depends on SERIAL_MCF
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Enable a ColdFire internal serial port to be the system console.
|
|
|
|
config SERIAL_68360_SMC
|
|
bool "68360 SMC uart support"
|
|
depends on M68360
|
|
help
|
|
This driver supports the SMC serial ports of the Motorola 68360 CPU.
|
|
|
|
config SERIAL_68360_SCC
|
|
bool "68360 SCC uart support"
|
|
depends on M68360
|
|
help
|
|
This driver supports the SCC serial ports of the Motorola 68360 CPU.
|
|
|
|
config SERIAL_68360
|
|
bool
|
|
depends on SERIAL_68360_SMC || SERIAL_68360_SCC
|
|
default y
|
|
|
|
config SERIAL_PMACZILOG
|
|
tristate "PowerMac z85c30 ESCC support"
|
|
depends on PPC_OF && PPC_PMAC
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Zilog z85C30 serial ports found on
|
|
PowerMac machines.
|
|
Say Y or M if you want to be able to these serial ports.
|
|
|
|
config SERIAL_PMACZILOG_TTYS
|
|
bool "Use ttySn device nodes for Zilog z85c30"
|
|
depends on SERIAL_PMACZILOG
|
|
help
|
|
The pmac_zilog driver for the z85C30 chip on many powermacs
|
|
historically used the device numbers for /dev/ttySn. The
|
|
8250 serial port driver also uses these numbers, which means
|
|
the two drivers being unable to coexist; you could not use
|
|
both z85C30 and 8250 type ports at the same time.
|
|
|
|
If this option is not selected, the pmac_zilog driver will
|
|
use the device numbers allocated for /dev/ttyPZn. This allows
|
|
the pmac_zilog and 8250 drivers to co-exist, but may cause
|
|
existing userspace setups to break. Programs that need to
|
|
access the built-in serial ports on powermacs will need to
|
|
be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
|
|
|
|
If you enable this option, any z85c30 ports in the system will
|
|
be registered as ttyS0 onwards as in the past, and you will be
|
|
unable to use the 8250 module for PCMCIA or other 16C550-style
|
|
UARTs.
|
|
|
|
Say N unless you need the z85c30 ports on your powermac
|
|
to appear as /dev/ttySn.
|
|
|
|
config SERIAL_PMACZILOG_CONSOLE
|
|
bool "Console on PowerMac z85c30 serial port"
|
|
depends on SERIAL_PMACZILOG=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you would like to be able to use the z85c30 serial port
|
|
on your PowerMac as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_LH7A40X
|
|
tristate "Sharp LH7A40X embedded UART support"
|
|
depends on ARM && ARCH_LH7A40X
|
|
select SERIAL_CORE
|
|
help
|
|
This enables support for the three on-board UARTs of the
|
|
Sharp LH7A40X series CPUs. Choose Y or M.
|
|
|
|
config SERIAL_LH7A40X_CONSOLE
|
|
bool "Support for console on Sharp LH7A40X serial port"
|
|
depends on SERIAL_LH7A40X=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use one of the serial ports as the
|
|
system console--the system console is the device which
|
|
receives all kernel messages and warnings and which allows
|
|
logins in single user mode.
|
|
|
|
Even if you say Y here, the currently visible framebuffer console
|
|
(/dev/tty0) will still be used as the default system console, but
|
|
you can alter that using a kernel command line, for example
|
|
"console=ttyAM1".
|
|
|
|
config SERIAL_CPM
|
|
tristate "CPM SCC/SMC serial port support"
|
|
depends on CPM2 || 8xx
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the SCC and SMC serial ports on Motorola
|
|
embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
|
|
|
|
config SERIAL_CPM_CONSOLE
|
|
bool "Support for console on CPM SCC/SMC serial port"
|
|
depends on SERIAL_CPM=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use a SCC or SMC CPM UART as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
Even if you say Y here, the currently visible framebuffer console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyCPM0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_CPM_SCC1
|
|
bool "Support for SCC1 serial port"
|
|
depends on SERIAL_CPM=y
|
|
help
|
|
Select this option to use SCC1 as a serial port
|
|
|
|
config SERIAL_CPM_SCC2
|
|
bool "Support for SCC2 serial port"
|
|
depends on SERIAL_CPM=y
|
|
help
|
|
Select this option to use SCC2 as a serial port
|
|
|
|
config SERIAL_CPM_SCC3
|
|
bool "Support for SCC3 serial port"
|
|
depends on SERIAL_CPM=y
|
|
help
|
|
Select this option to use SCC3 as a serial port
|
|
|
|
config SERIAL_CPM_SCC4
|
|
bool "Support for SCC4 serial port"
|
|
depends on SERIAL_CPM=y
|
|
help
|
|
Select this option to use SCC4 as a serial port
|
|
|
|
config SERIAL_CPM_SMC1
|
|
bool "Support for SMC1 serial port"
|
|
depends on SERIAL_CPM=y
|
|
help
|
|
Select this option to use SMC1 as a serial port
|
|
|
|
config SERIAL_CPM_SMC2
|
|
bool "Support for SMC2 serial port"
|
|
depends on SERIAL_CPM=y
|
|
help
|
|
Select this option to use SMC2 as a serial port
|
|
|
|
config SERIAL_SGI_L1_CONSOLE
|
|
bool "SGI Altix L1 serial console support"
|
|
depends on IA64_GENERIC || IA64_SGI_SN2
|
|
select SERIAL_CORE
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have an SGI Altix and you would like to use the system
|
|
controller serial port as your console (you want this!),
|
|
say Y. Otherwise, say N.
|
|
|
|
config SERIAL_MPC52xx
|
|
tristate "Freescale MPC52xx/MPC512x family PSC serial support"
|
|
depends on PPC_MPC52xx || PPC_MPC512x
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports MPC52xx and MPC512x PSC serial ports. If you would
|
|
like to use them, you must answer Y or M to this option. Note that
|
|
for use as console, it must be included in kernel and not as a
|
|
module.
|
|
|
|
config SERIAL_MPC52xx_CONSOLE
|
|
bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
|
|
depends on SERIAL_MPC52xx=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Select this options if you'd like to use one of the PSC serial port
|
|
of the Freescale MPC52xx family as a console.
|
|
|
|
config SERIAL_MPC52xx_CONSOLE_BAUD
|
|
int "Freescale MPC52xx/MPC512x family PSC serial port baud"
|
|
depends on SERIAL_MPC52xx_CONSOLE=y
|
|
default "9600"
|
|
help
|
|
Select the MPC52xx console baud rate.
|
|
This value is only used if the bootloader doesn't pass in the
|
|
console baudrate
|
|
|
|
config SERIAL_ICOM
|
|
tristate "IBM Multiport Serial Adapter"
|
|
depends on PCI && (PPC_ISERIES || PPC_PSERIES)
|
|
select SERIAL_CORE
|
|
select FW_LOADER
|
|
help
|
|
This driver is for a family of multiport serial adapters
|
|
including 2 port RVX, 2 port internal modem, 4 port internal
|
|
modem and a split 1 port RVX and 1 port internal modem.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called icom.
|
|
|
|
config SERIAL_M32R_SIO
|
|
bool "M32R SIO I/F"
|
|
depends on M32R
|
|
default y
|
|
select SERIAL_CORE
|
|
help
|
|
Say Y here if you want to use the M32R serial controller.
|
|
|
|
config SERIAL_M32R_SIO_CONSOLE
|
|
bool "use SIO console"
|
|
depends on SERIAL_M32R_SIO=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you want to support a serial console.
|
|
|
|
If you use an M3T-M32700UT or an OPSPUT platform,
|
|
please say also y for SERIAL_M32R_PLDSIO.
|
|
|
|
config SERIAL_M32R_PLDSIO
|
|
bool "M32R SIO I/F on a PLD"
|
|
depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
|
|
default n
|
|
help
|
|
Say Y here if you want to use the M32R serial controller
|
|
on a PLD (Programmable Logic Device).
|
|
|
|
If you use an M3T-M32700UT or an OPSPUT platform,
|
|
please say Y.
|
|
|
|
config SERIAL_TXX9
|
|
bool "TMPTX39XX/49XX SIO support"
|
|
depends on HAS_TXX9_SERIAL
|
|
select SERIAL_CORE
|
|
default y
|
|
|
|
config HAS_TXX9_SERIAL
|
|
bool
|
|
|
|
config SERIAL_TXX9_NR_UARTS
|
|
int "Maximum number of TMPTX39XX/49XX SIO ports"
|
|
depends on SERIAL_TXX9
|
|
default "6"
|
|
|
|
config SERIAL_TXX9_CONSOLE
|
|
bool "TMPTX39XX/49XX SIO Console support"
|
|
depends on SERIAL_TXX9=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config SERIAL_TXX9_STDSERIAL
|
|
bool "TX39XX/49XX SIO act as standard serial"
|
|
depends on !SERIAL_8250 && SERIAL_TXX9
|
|
|
|
config SERIAL_VR41XX
|
|
tristate "NEC VR4100 series Serial Interface Unit support"
|
|
depends on CPU_VR41XX
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a NEC VR4100 series processor and you want to use
|
|
Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
|
|
(not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
|
|
|
|
config SERIAL_VR41XX_CONSOLE
|
|
bool "Enable NEC VR4100 series Serial Interface Unit console"
|
|
depends on SERIAL_VR41XX=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have a NEC VR4100 series processor and you want to use
|
|
a console on a serial port, say Y. Otherwise, say N.
|
|
|
|
config SERIAL_JSM
|
|
tristate "Digi International NEO PCI Support"
|
|
depends on PCI
|
|
select SERIAL_CORE
|
|
help
|
|
This is a driver for Digi International's Neo series
|
|
of cards which provide multiple serial ports. You would need
|
|
something like this to connect more than two modems to your Linux
|
|
box, for instance in order to become a dial-in server. This driver
|
|
supports PCI boards only.
|
|
|
|
If you have a card like this, say Y here, otherwise say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called jsm.
|
|
|
|
config SERIAL_SGI_IOC4
|
|
tristate "SGI IOC4 controller serial support"
|
|
depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
|
|
select SERIAL_CORE
|
|
help
|
|
If you have an SGI Altix with an IOC4 based Base IO card
|
|
and wish to use the serial ports on this card, say Y.
|
|
Otherwise, say N.
|
|
|
|
config SERIAL_SGI_IOC3
|
|
tristate "SGI Altix IOC3 serial support"
|
|
depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
|
|
select SERIAL_CORE
|
|
help
|
|
If you have an SGI Altix with an IOC3 serial card,
|
|
say Y or M. Otherwise, say N.
|
|
|
|
config SERIAL_NETX
|
|
bool "NetX serial port support"
|
|
depends on ARM && ARCH_NETX
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a machine based on a Hilscher NetX SoC you
|
|
can enable its onboard serial port by enabling this option.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called netx-serial.
|
|
|
|
config SERIAL_NETX_CONSOLE
|
|
bool "Console on NetX serial port"
|
|
depends on SERIAL_NETX
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the Hilscher NetX SoC
|
|
you can make it the console by answering Y to this option.
|
|
|
|
config SERIAL_OF_PLATFORM
|
|
tristate "Serial port on Open Firmware platform bus"
|
|
depends on PPC_OF
|
|
depends on SERIAL_8250
|
|
help
|
|
If you have a PowerPC based system that has serial ports
|
|
on a platform specific bus, you should enable this option.
|
|
Currently, only 8250 compatible ports are supported, but
|
|
others can easily be added.
|
|
|
|
config SERIAL_QE
|
|
tristate "Freescale QUICC Engine serial port support"
|
|
depends on QUICC_ENGINE
|
|
select SERIAL_CORE
|
|
select FW_LOADER
|
|
default n
|
|
help
|
|
This driver supports the QE serial ports on Freescale embedded
|
|
PowerPC that contain a QUICC Engine.
|
|
|
|
config SERIAL_SC26XX
|
|
tristate "SC2681/SC2692 serial port support"
|
|
depends on SNI_RM
|
|
select SERIAL_CORE
|
|
help
|
|
This is a driver for the onboard serial ports of
|
|
older RM400 machines.
|
|
|
|
config SERIAL_SC26XX_CONSOLE
|
|
bool "Console on SC2681/SC2692 serial port"
|
|
depends on SERIAL_SC26XX
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Support for Console on SC2681/SC2692 serial ports.
|
|
|
|
config SERIAL_BFIN_SPORT
|
|
tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
|
|
depends on BFIN && EXPERIMENTAL
|
|
select SERIAL_CORE
|
|
help
|
|
Enble support SPORT emulate UART on Blackfin series.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bfin_sport_uart.
|
|
|
|
choice
|
|
prompt "Baud rate for Blackfin SPORT UART"
|
|
depends on SERIAL_BFIN_SPORT
|
|
default SERIAL_SPORT_BAUD_RATE_57600
|
|
help
|
|
Choose a baud rate for the SPORT UART, other uart settings are
|
|
8 bit, 1 stop bit, no parity, no flow control.
|
|
|
|
config SERIAL_SPORT_BAUD_RATE_115200
|
|
bool "115200"
|
|
|
|
config SERIAL_SPORT_BAUD_RATE_57600
|
|
bool "57600"
|
|
|
|
config SERIAL_SPORT_BAUD_RATE_38400
|
|
bool "38400"
|
|
|
|
config SERIAL_SPORT_BAUD_RATE_19200
|
|
bool "19200"
|
|
|
|
config SERIAL_SPORT_BAUD_RATE_9600
|
|
bool "9600"
|
|
endchoice
|
|
|
|
config SPORT_BAUD_RATE
|
|
int
|
|
depends on SERIAL_BFIN_SPORT
|
|
default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
|
|
default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
|
|
default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
|
|
default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
|
|
default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
|
|
|
|
endmenu
|