689 строки
18 KiB
C
689 строки
18 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* An RTC driver for Allwinner A31/A23
|
|
*
|
|
* Copyright (c) 2014, Chen-Yu Tsai <wens@csie.org>
|
|
*
|
|
* based on rtc-sunxi.c
|
|
*
|
|
* An RTC driver for Allwinner A10/A20
|
|
*
|
|
* Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
/* Control register */
|
|
#define SUN6I_LOSC_CTRL 0x0000
|
|
#define SUN6I_LOSC_CTRL_KEY (0x16aa << 16)
|
|
#define SUN6I_LOSC_CTRL_ALM_DHMS_ACC BIT(9)
|
|
#define SUN6I_LOSC_CTRL_RTC_HMS_ACC BIT(8)
|
|
#define SUN6I_LOSC_CTRL_RTC_YMD_ACC BIT(7)
|
|
#define SUN6I_LOSC_CTRL_EXT_OSC BIT(0)
|
|
#define SUN6I_LOSC_CTRL_ACC_MASK GENMASK(9, 7)
|
|
|
|
#define SUN6I_LOSC_CLK_PRESCAL 0x0008
|
|
|
|
/* RTC */
|
|
#define SUN6I_RTC_YMD 0x0010
|
|
#define SUN6I_RTC_HMS 0x0014
|
|
|
|
/* Alarm 0 (counter) */
|
|
#define SUN6I_ALRM_COUNTER 0x0020
|
|
#define SUN6I_ALRM_CUR_VAL 0x0024
|
|
#define SUN6I_ALRM_EN 0x0028
|
|
#define SUN6I_ALRM_EN_CNT_EN BIT(0)
|
|
#define SUN6I_ALRM_IRQ_EN 0x002c
|
|
#define SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0)
|
|
#define SUN6I_ALRM_IRQ_STA 0x0030
|
|
#define SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0)
|
|
|
|
/* Alarm 1 (wall clock) */
|
|
#define SUN6I_ALRM1_EN 0x0044
|
|
#define SUN6I_ALRM1_IRQ_EN 0x0048
|
|
#define SUN6I_ALRM1_IRQ_STA 0x004c
|
|
#define SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND BIT(0)
|
|
|
|
/* Alarm config */
|
|
#define SUN6I_ALARM_CONFIG 0x0050
|
|
#define SUN6I_ALARM_CONFIG_WAKEUP BIT(0)
|
|
|
|
#define SUN6I_LOSC_OUT_GATING 0x0060
|
|
#define SUN6I_LOSC_OUT_GATING_EN_OFFSET 0
|
|
|
|
/*
|
|
* Get date values
|
|
*/
|
|
#define SUN6I_DATE_GET_DAY_VALUE(x) ((x) & 0x0000001f)
|
|
#define SUN6I_DATE_GET_MON_VALUE(x) (((x) & 0x00000f00) >> 8)
|
|
#define SUN6I_DATE_GET_YEAR_VALUE(x) (((x) & 0x003f0000) >> 16)
|
|
#define SUN6I_LEAP_GET_VALUE(x) (((x) & 0x00400000) >> 22)
|
|
|
|
/*
|
|
* Get time values
|
|
*/
|
|
#define SUN6I_TIME_GET_SEC_VALUE(x) ((x) & 0x0000003f)
|
|
#define SUN6I_TIME_GET_MIN_VALUE(x) (((x) & 0x00003f00) >> 8)
|
|
#define SUN6I_TIME_GET_HOUR_VALUE(x) (((x) & 0x001f0000) >> 16)
|
|
|
|
/*
|
|
* Set date values
|
|
*/
|
|
#define SUN6I_DATE_SET_DAY_VALUE(x) ((x) & 0x0000001f)
|
|
#define SUN6I_DATE_SET_MON_VALUE(x) ((x) << 8 & 0x00000f00)
|
|
#define SUN6I_DATE_SET_YEAR_VALUE(x) ((x) << 16 & 0x003f0000)
|
|
#define SUN6I_LEAP_SET_VALUE(x) ((x) << 22 & 0x00400000)
|
|
|
|
/*
|
|
* Set time values
|
|
*/
|
|
#define SUN6I_TIME_SET_SEC_VALUE(x) ((x) & 0x0000003f)
|
|
#define SUN6I_TIME_SET_MIN_VALUE(x) ((x) << 8 & 0x00003f00)
|
|
#define SUN6I_TIME_SET_HOUR_VALUE(x) ((x) << 16 & 0x001f0000)
|
|
|
|
/*
|
|
* The year parameter passed to the driver is usually an offset relative to
|
|
* the year 1900. This macro is used to convert this offset to another one
|
|
* relative to the minimum year allowed by the hardware.
|
|
*
|
|
* The year range is 1970 - 2033. This range is selected to match Allwinner's
|
|
* driver, even though it is somewhat limited.
|
|
*/
|
|
#define SUN6I_YEAR_MIN 1970
|
|
#define SUN6I_YEAR_MAX 2033
|
|
#define SUN6I_YEAR_OFF (SUN6I_YEAR_MIN - 1900)
|
|
|
|
/*
|
|
* There are other differences between models, including:
|
|
*
|
|
* - number of GPIO pins that can be configured to hold a certain level
|
|
* - crypto-key related registers (H5, H6)
|
|
* - boot process related (super standby, secondary processor entry address)
|
|
* registers (R40, H6)
|
|
* - SYS power domain controls (R40)
|
|
* - DCXO controls (H6)
|
|
* - RC oscillator calibration (H6)
|
|
*
|
|
* These functions are not covered by this driver.
|
|
*/
|
|
struct sun6i_rtc_clk_data {
|
|
unsigned long rc_osc_rate;
|
|
unsigned int fixed_prescaler : 16;
|
|
unsigned int has_prescaler : 1;
|
|
unsigned int has_out_clk : 1;
|
|
unsigned int export_iosc : 1;
|
|
};
|
|
|
|
struct sun6i_rtc_dev {
|
|
struct rtc_device *rtc;
|
|
struct device *dev;
|
|
const struct sun6i_rtc_clk_data *data;
|
|
void __iomem *base;
|
|
int irq;
|
|
unsigned long alarm;
|
|
|
|
struct clk_hw hw;
|
|
struct clk_hw *int_osc;
|
|
struct clk *losc;
|
|
struct clk *ext_losc;
|
|
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static struct sun6i_rtc_dev *sun6i_rtc;
|
|
|
|
static unsigned long sun6i_rtc_osc_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
|
|
u32 val = 0;
|
|
|
|
val = readl(rtc->base + SUN6I_LOSC_CTRL);
|
|
if (val & SUN6I_LOSC_CTRL_EXT_OSC)
|
|
return parent_rate;
|
|
|
|
if (rtc->data->fixed_prescaler)
|
|
parent_rate /= rtc->data->fixed_prescaler;
|
|
|
|
if (rtc->data->has_prescaler) {
|
|
val = readl(rtc->base + SUN6I_LOSC_CLK_PRESCAL);
|
|
val &= GENMASK(4, 0);
|
|
}
|
|
|
|
return parent_rate / (val + 1);
|
|
}
|
|
|
|
static u8 sun6i_rtc_osc_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
|
|
|
|
return readl(rtc->base + SUN6I_LOSC_CTRL) & SUN6I_LOSC_CTRL_EXT_OSC;
|
|
}
|
|
|
|
static int sun6i_rtc_osc_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
if (index > 1)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
val = readl(rtc->base + SUN6I_LOSC_CTRL);
|
|
val &= ~SUN6I_LOSC_CTRL_EXT_OSC;
|
|
val |= SUN6I_LOSC_CTRL_KEY;
|
|
val |= index ? SUN6I_LOSC_CTRL_EXT_OSC : 0;
|
|
writel(val, rtc->base + SUN6I_LOSC_CTRL);
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops sun6i_rtc_osc_ops = {
|
|
.recalc_rate = sun6i_rtc_osc_recalc_rate,
|
|
|
|
.get_parent = sun6i_rtc_osc_get_parent,
|
|
.set_parent = sun6i_rtc_osc_set_parent,
|
|
};
|
|
|
|
static void __init sun6i_rtc_clk_init(struct device_node *node,
|
|
const struct sun6i_rtc_clk_data *data)
|
|
{
|
|
struct clk_hw_onecell_data *clk_data;
|
|
struct sun6i_rtc_dev *rtc;
|
|
struct clk_init_data init = {
|
|
.ops = &sun6i_rtc_osc_ops,
|
|
.name = "losc",
|
|
};
|
|
const char *iosc_name = "rtc-int-osc";
|
|
const char *clkout_name = "osc32k-out";
|
|
const char *parents[2];
|
|
|
|
rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
|
|
if (!rtc)
|
|
return;
|
|
|
|
rtc->data = data;
|
|
clk_data = kzalloc(struct_size(clk_data, hws, 3), GFP_KERNEL);
|
|
if (!clk_data) {
|
|
kfree(rtc);
|
|
return;
|
|
}
|
|
|
|
spin_lock_init(&rtc->lock);
|
|
|
|
rtc->base = of_io_request_and_map(node, 0, of_node_full_name(node));
|
|
if (IS_ERR(rtc->base)) {
|
|
pr_crit("Can't map RTC registers");
|
|
goto err;
|
|
}
|
|
|
|
/* Switch to the external, more precise, oscillator */
|
|
writel(SUN6I_LOSC_CTRL_KEY | SUN6I_LOSC_CTRL_EXT_OSC,
|
|
rtc->base + SUN6I_LOSC_CTRL);
|
|
|
|
/* Yes, I know, this is ugly. */
|
|
sun6i_rtc = rtc;
|
|
|
|
/* Deal with old DTs */
|
|
if (!of_get_property(node, "clocks", NULL))
|
|
goto err;
|
|
|
|
/* Only read IOSC name from device tree if it is exported */
|
|
if (rtc->data->export_iosc)
|
|
of_property_read_string_index(node, "clock-output-names", 2,
|
|
&iosc_name);
|
|
|
|
rtc->int_osc = clk_hw_register_fixed_rate_with_accuracy(NULL,
|
|
iosc_name,
|
|
NULL, 0,
|
|
rtc->data->rc_osc_rate,
|
|
300000000);
|
|
if (IS_ERR(rtc->int_osc)) {
|
|
pr_crit("Couldn't register the internal oscillator\n");
|
|
return;
|
|
}
|
|
|
|
parents[0] = clk_hw_get_name(rtc->int_osc);
|
|
parents[1] = of_clk_get_parent_name(node, 0);
|
|
|
|
rtc->hw.init = &init;
|
|
|
|
init.parent_names = parents;
|
|
init.num_parents = of_clk_get_parent_count(node) + 1;
|
|
of_property_read_string_index(node, "clock-output-names", 0,
|
|
&init.name);
|
|
|
|
rtc->losc = clk_register(NULL, &rtc->hw);
|
|
if (IS_ERR(rtc->losc)) {
|
|
pr_crit("Couldn't register the LOSC clock\n");
|
|
return;
|
|
}
|
|
|
|
of_property_read_string_index(node, "clock-output-names", 1,
|
|
&clkout_name);
|
|
rtc->ext_losc = clk_register_gate(NULL, clkout_name, rtc->hw.init->name,
|
|
0, rtc->base + SUN6I_LOSC_OUT_GATING,
|
|
SUN6I_LOSC_OUT_GATING_EN_OFFSET, 0,
|
|
&rtc->lock);
|
|
if (IS_ERR(rtc->ext_losc)) {
|
|
pr_crit("Couldn't register the LOSC external gate\n");
|
|
return;
|
|
}
|
|
|
|
clk_data->num = 2;
|
|
clk_data->hws[0] = &rtc->hw;
|
|
clk_data->hws[1] = __clk_get_hw(rtc->ext_losc);
|
|
if (rtc->data->export_iosc) {
|
|
clk_data->hws[2] = rtc->int_osc;
|
|
clk_data->num = 3;
|
|
}
|
|
of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
|
|
return;
|
|
|
|
err:
|
|
kfree(clk_data);
|
|
}
|
|
|
|
static const struct sun6i_rtc_clk_data sun6i_a31_rtc_data = {
|
|
.rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
|
|
.has_prescaler = 1,
|
|
};
|
|
|
|
static void __init sun6i_a31_rtc_clk_init(struct device_node *node)
|
|
{
|
|
sun6i_rtc_clk_init(node, &sun6i_a31_rtc_data);
|
|
}
|
|
CLK_OF_DECLARE_DRIVER(sun6i_a31_rtc_clk, "allwinner,sun6i-a31-rtc",
|
|
sun6i_a31_rtc_clk_init);
|
|
|
|
static const struct sun6i_rtc_clk_data sun8i_a23_rtc_data = {
|
|
.rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
|
|
.has_prescaler = 1,
|
|
.has_out_clk = 1,
|
|
};
|
|
|
|
static void __init sun8i_a23_rtc_clk_init(struct device_node *node)
|
|
{
|
|
sun6i_rtc_clk_init(node, &sun8i_a23_rtc_data);
|
|
}
|
|
CLK_OF_DECLARE_DRIVER(sun8i_a23_rtc_clk, "allwinner,sun8i-a23-rtc",
|
|
sun8i_a23_rtc_clk_init);
|
|
|
|
static const struct sun6i_rtc_clk_data sun8i_h3_rtc_data = {
|
|
.rc_osc_rate = 16000000,
|
|
.fixed_prescaler = 32,
|
|
.has_prescaler = 1,
|
|
.has_out_clk = 1,
|
|
.export_iosc = 1,
|
|
};
|
|
|
|
static void __init sun8i_h3_rtc_clk_init(struct device_node *node)
|
|
{
|
|
sun6i_rtc_clk_init(node, &sun8i_h3_rtc_data);
|
|
}
|
|
CLK_OF_DECLARE_DRIVER(sun8i_h3_rtc_clk, "allwinner,sun8i-h3-rtc",
|
|
sun8i_h3_rtc_clk_init);
|
|
/* As far as we are concerned, clocks for H5 are the same as H3 */
|
|
CLK_OF_DECLARE_DRIVER(sun50i_h5_rtc_clk, "allwinner,sun50i-h5-rtc",
|
|
sun8i_h3_rtc_clk_init);
|
|
|
|
static const struct sun6i_rtc_clk_data sun8i_v3_rtc_data = {
|
|
.rc_osc_rate = 32000,
|
|
.has_out_clk = 1,
|
|
};
|
|
|
|
static void __init sun8i_v3_rtc_clk_init(struct device_node *node)
|
|
{
|
|
sun6i_rtc_clk_init(node, &sun8i_v3_rtc_data);
|
|
}
|
|
CLK_OF_DECLARE_DRIVER(sun8i_v3_rtc_clk, "allwinner,sun8i-v3-rtc",
|
|
sun8i_v3_rtc_clk_init);
|
|
|
|
static irqreturn_t sun6i_rtc_alarmirq(int irq, void *id)
|
|
{
|
|
struct sun6i_rtc_dev *chip = (struct sun6i_rtc_dev *) id;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 val;
|
|
|
|
spin_lock(&chip->lock);
|
|
val = readl(chip->base + SUN6I_ALRM_IRQ_STA);
|
|
|
|
if (val & SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND) {
|
|
val |= SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND;
|
|
writel(val, chip->base + SUN6I_ALRM_IRQ_STA);
|
|
|
|
rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
spin_unlock(&chip->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sun6i_rtc_setaie(int to, struct sun6i_rtc_dev *chip)
|
|
{
|
|
u32 alrm_val = 0;
|
|
u32 alrm_irq_val = 0;
|
|
u32 alrm_wake_val = 0;
|
|
unsigned long flags;
|
|
|
|
if (to) {
|
|
alrm_val = SUN6I_ALRM_EN_CNT_EN;
|
|
alrm_irq_val = SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN;
|
|
alrm_wake_val = SUN6I_ALARM_CONFIG_WAKEUP;
|
|
} else {
|
|
writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
|
|
chip->base + SUN6I_ALRM_IRQ_STA);
|
|
}
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
writel(alrm_val, chip->base + SUN6I_ALRM_EN);
|
|
writel(alrm_irq_val, chip->base + SUN6I_ALRM_IRQ_EN);
|
|
writel(alrm_wake_val, chip->base + SUN6I_ALARM_CONFIG);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static int sun6i_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
|
|
{
|
|
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
|
|
u32 date, time;
|
|
|
|
/*
|
|
* read again in case it changes
|
|
*/
|
|
do {
|
|
date = readl(chip->base + SUN6I_RTC_YMD);
|
|
time = readl(chip->base + SUN6I_RTC_HMS);
|
|
} while ((date != readl(chip->base + SUN6I_RTC_YMD)) ||
|
|
(time != readl(chip->base + SUN6I_RTC_HMS)));
|
|
|
|
rtc_tm->tm_sec = SUN6I_TIME_GET_SEC_VALUE(time);
|
|
rtc_tm->tm_min = SUN6I_TIME_GET_MIN_VALUE(time);
|
|
rtc_tm->tm_hour = SUN6I_TIME_GET_HOUR_VALUE(time);
|
|
|
|
rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date);
|
|
rtc_tm->tm_mon = SUN6I_DATE_GET_MON_VALUE(date);
|
|
rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date);
|
|
|
|
rtc_tm->tm_mon -= 1;
|
|
|
|
/*
|
|
* switch from (data_year->min)-relative offset to
|
|
* a (1900)-relative one
|
|
*/
|
|
rtc_tm->tm_year += SUN6I_YEAR_OFF;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
|
|
{
|
|
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
u32 alrm_st;
|
|
u32 alrm_en;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
alrm_en = readl(chip->base + SUN6I_ALRM_IRQ_EN);
|
|
alrm_st = readl(chip->base + SUN6I_ALRM_IRQ_STA);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
wkalrm->enabled = !!(alrm_en & SUN6I_ALRM_EN_CNT_EN);
|
|
wkalrm->pending = !!(alrm_st & SUN6I_ALRM_EN_CNT_EN);
|
|
rtc_time_to_tm(chip->alarm, &wkalrm->time);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
|
|
{
|
|
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
|
|
struct rtc_time *alrm_tm = &wkalrm->time;
|
|
struct rtc_time tm_now;
|
|
unsigned long time_now = 0;
|
|
unsigned long time_set = 0;
|
|
unsigned long time_gap = 0;
|
|
int ret = 0;
|
|
|
|
ret = sun6i_rtc_gettime(dev, &tm_now);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Error in getting time\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
rtc_tm_to_time(alrm_tm, &time_set);
|
|
rtc_tm_to_time(&tm_now, &time_now);
|
|
if (time_set <= time_now) {
|
|
dev_err(dev, "Date to set in the past\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
time_gap = time_set - time_now;
|
|
|
|
if (time_gap > U32_MAX) {
|
|
dev_err(dev, "Date too far in the future\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
sun6i_rtc_setaie(0, chip);
|
|
writel(0, chip->base + SUN6I_ALRM_COUNTER);
|
|
usleep_range(100, 300);
|
|
|
|
writel(time_gap, chip->base + SUN6I_ALRM_COUNTER);
|
|
chip->alarm = time_set;
|
|
|
|
sun6i_rtc_setaie(wkalrm->enabled, chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_rtc_wait(struct sun6i_rtc_dev *chip, int offset,
|
|
unsigned int mask, unsigned int ms_timeout)
|
|
{
|
|
const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
|
|
u32 reg;
|
|
|
|
do {
|
|
reg = readl(chip->base + offset);
|
|
reg &= mask;
|
|
|
|
if (!reg)
|
|
return 0;
|
|
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
|
|
{
|
|
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
|
|
u32 date = 0;
|
|
u32 time = 0;
|
|
int year;
|
|
|
|
year = rtc_tm->tm_year + 1900;
|
|
if (year < SUN6I_YEAR_MIN || year > SUN6I_YEAR_MAX) {
|
|
dev_err(dev, "rtc only supports year in range %d - %d\n",
|
|
SUN6I_YEAR_MIN, SUN6I_YEAR_MAX);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rtc_tm->tm_year -= SUN6I_YEAR_OFF;
|
|
rtc_tm->tm_mon += 1;
|
|
|
|
date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
|
|
SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon) |
|
|
SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
|
|
|
|
if (is_leap_year(year))
|
|
date |= SUN6I_LEAP_SET_VALUE(1);
|
|
|
|
time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) |
|
|
SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min) |
|
|
SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
|
|
|
|
/* Check whether registers are writable */
|
|
if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
|
|
SUN6I_LOSC_CTRL_ACC_MASK, 50)) {
|
|
dev_err(dev, "rtc is still busy.\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
writel(time, chip->base + SUN6I_RTC_HMS);
|
|
|
|
/*
|
|
* After writing the RTC HH-MM-SS register, the
|
|
* SUN6I_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
|
|
* be cleared until the real writing operation is finished
|
|
*/
|
|
|
|
if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
|
|
SUN6I_LOSC_CTRL_RTC_HMS_ACC, 50)) {
|
|
dev_err(dev, "Failed to set rtc time.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
writel(date, chip->base + SUN6I_RTC_YMD);
|
|
|
|
/*
|
|
* After writing the RTC YY-MM-DD register, the
|
|
* SUN6I_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
|
|
* be cleared until the real writing operation is finished
|
|
*/
|
|
|
|
if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
|
|
SUN6I_LOSC_CTRL_RTC_YMD_ACC, 50)) {
|
|
dev_err(dev, "Failed to set rtc time.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
|
|
|
|
if (!enabled)
|
|
sun6i_rtc_setaie(enabled, chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops sun6i_rtc_ops = {
|
|
.read_time = sun6i_rtc_gettime,
|
|
.set_time = sun6i_rtc_settime,
|
|
.read_alarm = sun6i_rtc_getalarm,
|
|
.set_alarm = sun6i_rtc_setalarm,
|
|
.alarm_irq_enable = sun6i_rtc_alarm_irq_enable
|
|
};
|
|
|
|
static int sun6i_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct sun6i_rtc_dev *chip = sun6i_rtc;
|
|
int ret;
|
|
|
|
if (!chip)
|
|
return -ENODEV;
|
|
|
|
platform_set_drvdata(pdev, chip);
|
|
chip->dev = &pdev->dev;
|
|
|
|
chip->irq = platform_get_irq(pdev, 0);
|
|
if (chip->irq < 0) {
|
|
dev_err(&pdev->dev, "No IRQ resource\n");
|
|
return chip->irq;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq,
|
|
0, dev_name(&pdev->dev), chip);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Could not request IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
/* clear the alarm counter value */
|
|
writel(0, chip->base + SUN6I_ALRM_COUNTER);
|
|
|
|
/* disable counter alarm */
|
|
writel(0, chip->base + SUN6I_ALRM_EN);
|
|
|
|
/* disable counter alarm interrupt */
|
|
writel(0, chip->base + SUN6I_ALRM_IRQ_EN);
|
|
|
|
/* disable week alarm */
|
|
writel(0, chip->base + SUN6I_ALRM1_EN);
|
|
|
|
/* disable week alarm interrupt */
|
|
writel(0, chip->base + SUN6I_ALRM1_IRQ_EN);
|
|
|
|
/* clear counter alarm pending interrupts */
|
|
writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
|
|
chip->base + SUN6I_ALRM_IRQ_STA);
|
|
|
|
/* clear week alarm pending interrupts */
|
|
writel(SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND,
|
|
chip->base + SUN6I_ALRM1_IRQ_STA);
|
|
|
|
/* disable alarm wakeup */
|
|
writel(0, chip->base + SUN6I_ALARM_CONFIG);
|
|
|
|
clk_prepare_enable(chip->losc);
|
|
|
|
chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-sun6i",
|
|
&sun6i_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(chip->rtc)) {
|
|
dev_err(&pdev->dev, "unable to register device\n");
|
|
return PTR_ERR(chip->rtc);
|
|
}
|
|
|
|
dev_info(&pdev->dev, "RTC enabled\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* As far as RTC functionality goes, all models are the same. The
|
|
* datasheets claim that different models have different number of
|
|
* registers available for non-volatile storage, but experiments show
|
|
* that all SoCs have 16 registers available for this purpose.
|
|
*/
|
|
static const struct of_device_id sun6i_rtc_dt_ids[] = {
|
|
{ .compatible = "allwinner,sun6i-a31-rtc" },
|
|
{ .compatible = "allwinner,sun8i-a23-rtc" },
|
|
{ .compatible = "allwinner,sun8i-h3-rtc" },
|
|
{ .compatible = "allwinner,sun8i-v3-rtc" },
|
|
{ .compatible = "allwinner,sun50i-h5-rtc" },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids);
|
|
|
|
static struct platform_driver sun6i_rtc_driver = {
|
|
.probe = sun6i_rtc_probe,
|
|
.driver = {
|
|
.name = "sun6i-rtc",
|
|
.of_match_table = sun6i_rtc_dt_ids,
|
|
},
|
|
};
|
|
builtin_platform_driver(sun6i_rtc_driver);
|