1400 строки
38 KiB
Plaintext
1400 строки
38 KiB
Plaintext
# For a description of the syntax of this configuration file,
|
|
# see Documentation/kbuild/kconfig-language.txt.
|
|
#
|
|
|
|
mainmenu "Linux/PowerPC Kernel Configuration"
|
|
|
|
config MMU
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_HARDIRQS
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config PPC
|
|
bool
|
|
default y
|
|
|
|
config PPC32
|
|
bool
|
|
default y
|
|
|
|
# All PPCs use generic nvram driver through ppc_md
|
|
config GENERIC_NVRAM
|
|
bool
|
|
default y
|
|
|
|
config SCHED_NO_NO_OMIT_FRAME_POINTER
|
|
bool
|
|
default y
|
|
|
|
config ARCH_MAY_HAVE_PC_FDC
|
|
bool
|
|
default y
|
|
|
|
source "init/Kconfig"
|
|
|
|
menu "Processor"
|
|
|
|
choice
|
|
prompt "Processor Type"
|
|
default 6xx
|
|
|
|
config 6xx
|
|
bool "6xx/7xx/74xx/52xx/82xx/83xx"
|
|
select PPC_FPU
|
|
help
|
|
There are four types of PowerPC chips supported. The more common
|
|
types (601, 603, 604, 740, 750, 7400), the Motorola embedded
|
|
versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM
|
|
embedded versions (403 and 405) and the POWER3 processor.
|
|
(For support for more recent 64-bit processors, set ARCH=powerpc.)
|
|
Unless you are building a kernel for one of the embedded processor
|
|
systems or a POWER3-based IBM RS/6000, choose 6xx.
|
|
Note that the kernel runs in 32-bit mode even on 64-bit chips.
|
|
Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
|
|
specific support for that chipset is asked later on.
|
|
|
|
config 40x
|
|
bool "40x"
|
|
|
|
config 44x
|
|
bool "44x"
|
|
|
|
config POWER3
|
|
select PPC_FPU
|
|
bool "POWER3"
|
|
|
|
config 8xx
|
|
bool "8xx"
|
|
|
|
config E200
|
|
bool "e200"
|
|
|
|
config E500
|
|
bool "e500"
|
|
|
|
endchoice
|
|
|
|
config PPC_FPU
|
|
bool
|
|
|
|
config BOOKE
|
|
bool
|
|
depends on E200 || E500
|
|
default y
|
|
|
|
config FSL_BOOKE
|
|
bool
|
|
depends on E200 || E500
|
|
default y
|
|
|
|
config PTE_64BIT
|
|
bool
|
|
depends on 44x || E500
|
|
default y if 44x
|
|
default y if E500 && PHYS_64BIT
|
|
|
|
config PHYS_64BIT
|
|
bool 'Large physical address support' if E500
|
|
depends on 44x || E500
|
|
default y if 44x
|
|
---help---
|
|
This option enables kernel support for larger than 32-bit physical
|
|
addresses. This features is not be available on all e500 cores.
|
|
|
|
If in doubt, say N here.
|
|
|
|
config ALTIVEC
|
|
bool "AltiVec Support"
|
|
depends on 6xx
|
|
depends on !8260 && !83xx
|
|
---help---
|
|
This option enables kernel support for the Altivec extensions to the
|
|
PowerPC processor. The kernel currently supports saving and restoring
|
|
altivec registers, and turning on the 'altivec enable' bit so user
|
|
processes can execute altivec instructions.
|
|
|
|
This option is only usefully if you have a processor that supports
|
|
altivec (G4, otherwise known as 74xx series), but does not have
|
|
any affect on a non-altivec cpu (it does, however add code to the
|
|
kernel).
|
|
|
|
If in doubt, say Y here.
|
|
|
|
config SPE
|
|
bool "SPE Support"
|
|
depends on E200 || E500
|
|
---help---
|
|
This option enables kernel support for the Signal Processing
|
|
Extensions (SPE) to the PowerPC processor. The kernel currently
|
|
supports saving and restoring SPE registers, and turning on the
|
|
'spe enable' bit so user processes can execute SPE instructions.
|
|
|
|
This option is only useful if you have a processor that supports
|
|
SPE (e500, otherwise known as 85xx series), but does not have any
|
|
effect on a non-spe cpu (it does, however add code to the kernel).
|
|
|
|
If in doubt, say Y here.
|
|
|
|
config TAU
|
|
bool "Thermal Management Support"
|
|
depends on 6xx && !8260 && !83xx
|
|
help
|
|
G3 and G4 processors have an on-chip temperature sensor called the
|
|
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
|
|
temperature within 2-4 degrees Celsius. This option shows the current
|
|
on-die temperature in /proc/cpuinfo if the cpu supports it.
|
|
|
|
Unfortunately, on some chip revisions, this sensor is very inaccurate
|
|
and in some cases, does not work at all, so don't assume the cpu
|
|
temp is actually what /proc/cpuinfo says it is.
|
|
|
|
config TAU_INT
|
|
bool "Interrupt driven TAU driver (DANGEROUS)"
|
|
depends on TAU
|
|
---help---
|
|
The TAU supports an interrupt driven mode which causes an interrupt
|
|
whenever the temperature goes out of range. This is the fastest way
|
|
to get notified the temp has exceeded a range. With this option off,
|
|
a timer is used to re-check the temperature periodically.
|
|
|
|
However, on some cpus it appears that the TAU interrupt hardware
|
|
is buggy and can cause a situation which would lead unexplained hard
|
|
lockups.
|
|
|
|
Unless you are extending the TAU driver, or enjoy kernel/hardware
|
|
debugging, leave this option off.
|
|
|
|
config TAU_AVERAGE
|
|
bool "Average high and low temp"
|
|
depends on TAU
|
|
---help---
|
|
The TAU hardware can compare the temperature to an upper and lower
|
|
bound. The default behavior is to show both the upper and lower
|
|
bound in /proc/cpuinfo. If the range is large, the temperature is
|
|
either changing a lot, or the TAU hardware is broken (likely on some
|
|
G4's). If the range is small (around 4 degrees), the temperature is
|
|
relatively stable. If you say Y here, a single temperature value,
|
|
halfway between the upper and lower bounds, will be reported in
|
|
/proc/cpuinfo.
|
|
|
|
If in doubt, say N here.
|
|
|
|
config MATH_EMULATION
|
|
bool "Math emulation"
|
|
depends on 4xx || 8xx || E200 || E500
|
|
---help---
|
|
Some PowerPC chips designed for embedded applications do not have
|
|
a floating-point unit and therefore do not implement the
|
|
floating-point instructions in the PowerPC instruction set. If you
|
|
say Y here, the kernel will include code to emulate a floating-point
|
|
unit, which will allow programs that use floating-point
|
|
instructions to run.
|
|
|
|
If you have an Apple machine or an IBM RS/6000 or pSeries machine,
|
|
or any machine with a 6xx, 7xx or 7xxx series processor, say N
|
|
here. Saying Y here will not hurt performance (on any machine) but
|
|
will increase the size of the kernel.
|
|
|
|
config KEXEC
|
|
bool "kexec system call (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
kexec is a system call that implements the ability to shutdown your
|
|
current kernel, and to start another kernel. It is like a reboot
|
|
but it is indepedent of the system firmware. And like a reboot
|
|
you can start any kernel with it, not just Linux.
|
|
|
|
The name comes from the similiarity to the exec system call.
|
|
|
|
It is an ongoing process to be certain the hardware in a machine
|
|
is properly shutdown, so do not be surprised if this code does not
|
|
initially work for you. It may help to enable device hotplugging
|
|
support. As of this writing the exact hardware interface is
|
|
strongly in flux, so no good recommendation can be made.
|
|
|
|
In the GameCube implementation, kexec allows you to load and
|
|
run DOL files, including kernel and homebrew DOLs.
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
config PPC601_SYNC_FIX
|
|
bool "Workarounds for PPC601 bugs"
|
|
depends on 6xx && PPC_PREP
|
|
help
|
|
Some versions of the PPC601 (the first PowerPC chip) have bugs which
|
|
mean that extra synchronization instructions are required near
|
|
certain instructions, typically those that make major changes to the
|
|
CPU state. These extra instructions reduce performance slightly.
|
|
If you say N here, these extra instructions will not be included,
|
|
resulting in a kernel which will run faster but may not run at all
|
|
on some systems with the PPC601 chip.
|
|
|
|
If in doubt, say Y here.
|
|
|
|
source arch/ppc/platforms/4xx/Kconfig
|
|
source arch/ppc/platforms/85xx/Kconfig
|
|
|
|
config PPC64BRIDGE
|
|
bool
|
|
depends on POWER3
|
|
default y
|
|
|
|
config PPC_STD_MMU
|
|
bool
|
|
depends on 6xx || POWER3
|
|
default y
|
|
|
|
config NOT_COHERENT_CACHE
|
|
bool
|
|
depends on 4xx || 8xx || E200
|
|
default y
|
|
|
|
endmenu
|
|
|
|
menu "Platform options"
|
|
|
|
config FADS
|
|
bool
|
|
|
|
choice
|
|
prompt "8xx Machine Type"
|
|
depends on 8xx
|
|
default RPXLITE
|
|
|
|
config RPXLITE
|
|
bool "RPX-Lite"
|
|
---help---
|
|
Single-board computers based around the PowerPC MPC8xx chips and
|
|
intended for embedded applications. The following types are
|
|
supported:
|
|
|
|
RPX-Lite:
|
|
Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
|
|
|
|
RPX-Classic:
|
|
Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
|
|
the MPC 860
|
|
|
|
BSE-IP:
|
|
Bright Star Engineering ip-Engine.
|
|
|
|
TQM823L:
|
|
TQM850L:
|
|
TQM855L:
|
|
TQM860L:
|
|
MPC8xx based family of mini modules, half credit card size,
|
|
up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
|
|
2 x CAN bus interface, ...
|
|
Manufacturer: TQ Components, www.tq-group.de
|
|
Date of Release: October (?) 1999
|
|
End of Life: not yet :-)
|
|
URL:
|
|
- module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
|
|
- starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
|
|
- images: <http://www.denx.de/embedded-ppc-en.html>
|
|
|
|
FPS850L:
|
|
FingerPrint Sensor System (based on TQM850L)
|
|
Manufacturer: IKENDI AG, <http://www.ikendi.com/>
|
|
Date of Release: November 1999
|
|
End of life: end 2000 ?
|
|
URL: see TQM850L
|
|
|
|
IVMS8:
|
|
MPC860 based board used in the "Integrated Voice Mail System",
|
|
Small Version (8 voice channels)
|
|
Manufacturer: Speech Design, <http://www.speech-design.de/>
|
|
Date of Release: December 2000 (?)
|
|
End of life: -
|
|
URL: <http://www.speech-design.de/>
|
|
|
|
IVML24:
|
|
MPC860 based board used in the "Integrated Voice Mail System",
|
|
Large Version (24 voice channels)
|
|
Manufacturer: Speech Design, <http://www.speech-design.de/>
|
|
Date of Release: March 2001 (?)
|
|
End of life: -
|
|
URL: <http://www.speech-design.de/>
|
|
|
|
HERMES:
|
|
Hermes-Pro ISDN/LAN router with integrated 8 x hub
|
|
Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
|
|
<http://www.multidata.de/>
|
|
Date of Release: 2000 (?)
|
|
End of life: -
|
|
URL: <http://www.multidata.de/english/products/hpro.htm>
|
|
|
|
IP860:
|
|
VMEBus IP (Industry Pack) carrier board with MPC860
|
|
Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
|
|
Date of Release: ?
|
|
End of life: -
|
|
URL: <http://www.microsys.de/html/ip860.html>
|
|
|
|
PCU_E:
|
|
PCU = Peripheral Controller Unit, Extended
|
|
Manufacturer: Siemens AG, ICN (Information and Communication Networks)
|
|
<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
|
|
Date of Release: April 2001
|
|
End of life: August 2001
|
|
URL: n. a.
|
|
|
|
config RPXCLASSIC
|
|
bool "RPX-Classic"
|
|
help
|
|
The RPX-Classic is a single-board computer based on the Motorola
|
|
MPC860. It features 16MB of DRAM and a variable amount of flash,
|
|
I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
|
|
LEDs. Variants with Ethernet ports exist. Say Y here to support it
|
|
directly.
|
|
|
|
config BSEIP
|
|
bool "BSE-IP"
|
|
help
|
|
Say Y here to support the Bright Star Engineering ipEngine SBC.
|
|
This is a credit-card-sized device featuring a MPC823 processor,
|
|
26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
|
|
controller, and two RS232 ports.
|
|
|
|
config MPC8XXFADS
|
|
bool "FADS"
|
|
select FADS
|
|
|
|
config MPC86XADS
|
|
bool "MPC86XADS"
|
|
help
|
|
MPC86x Application Development System by Freescale Semiconductor.
|
|
The MPC86xADS is meant to serve as a platform for s/w and h/w
|
|
development around the MPC86X processor families.
|
|
select FADS
|
|
|
|
config MPC885ADS
|
|
bool "MPC885ADS"
|
|
help
|
|
Freescale Semiconductor MPC885 Application Development System (ADS).
|
|
Also known as DUET.
|
|
The MPC885ADS is meant to serve as a platform for s/w and h/w
|
|
development around the MPC885 processor family.
|
|
|
|
config TQM823L
|
|
bool "TQM823L"
|
|
help
|
|
Say Y here to support the TQM823L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config TQM850L
|
|
bool "TQM850L"
|
|
help
|
|
Say Y here to support the TQM850L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config TQM855L
|
|
bool "TQM855L"
|
|
help
|
|
Say Y here to support the TQM855L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config TQM860L
|
|
bool "TQM860L"
|
|
help
|
|
Say Y here to support the TQM860L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config FPS850L
|
|
bool "FPS850L"
|
|
|
|
config IVMS8
|
|
bool "IVMS8"
|
|
help
|
|
Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
|
|
from Speech Design, released March 2001. The manufacturer's website
|
|
is at <http://www.speech-design.de/>.
|
|
|
|
config IVML24
|
|
bool "IVML24"
|
|
help
|
|
Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
|
|
from Speech Design, released March 2001. The manufacturer's website
|
|
is at <http://www.speech-design.de/>.
|
|
|
|
config HERMES_PRO
|
|
bool "HERMES"
|
|
|
|
config IP860
|
|
bool "IP860"
|
|
|
|
config LWMON
|
|
bool "LWMON"
|
|
|
|
config PCU_E
|
|
bool "PCU_E"
|
|
|
|
config CCM
|
|
bool "CCM"
|
|
|
|
config LANTEC
|
|
bool "LANTEC"
|
|
|
|
config MBX
|
|
bool "MBX"
|
|
help
|
|
MBX is a line of Motorola single-board computer based around the
|
|
MPC821 and MPC860 processors, and intended for embedded-controller
|
|
applications. Say Y here to support these boards directly.
|
|
|
|
config WINCEPT
|
|
bool "WinCept"
|
|
help
|
|
The Wincept 100/110 is a Motorola single-board computer based on the
|
|
MPC821 PowerPC, introduced in 1998 and designed to be used in
|
|
thin-client machines. Say Y to support it directly.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Machine Type"
|
|
depends on 6xx || POWER3
|
|
default PPC_MULTIPLATFORM
|
|
---help---
|
|
Linux currently supports several different kinds of PowerPC-based
|
|
machines: Apple Power Macintoshes and clones (such as the Motorola
|
|
Starmax series), PReP (PowerPC Reference Platform) machines (such
|
|
as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
|
|
and some IBM RS/6000 systems), CHRP (Common Hardware Reference
|
|
Platform) machines (including all of the recent IBM RS/6000 and
|
|
pSeries machines), and several embedded PowerPC systems containing
|
|
4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
|
|
default option is to build a kernel which works on PReP and CHRP.
|
|
|
|
Note that support for Apple machines is now only available with
|
|
ARCH=powerpc, and has been removed from this menu. If you wish
|
|
to build a kernel for an Apple machine, exit this configuration
|
|
process and re-run it with ARCH=powerpc.
|
|
|
|
Select CHRP/PReP if configuring for an IBM RS/6000 or
|
|
pSeries machine, or a PReP machine.
|
|
|
|
Select Gemini if configuring for a Synergy Microsystems' Gemini
|
|
series Single Board Computer. More information is available at:
|
|
<http://www.synergymicro.com/PressRel/97_10_15.html>.
|
|
|
|
Select APUS if configuring for a PowerUP Amiga. More information is
|
|
available at: <http://linux-apus.sourceforge.net/>.
|
|
|
|
config PPC_MULTIPLATFORM
|
|
bool "CHRP/PReP"
|
|
|
|
config APUS
|
|
bool "Amiga-APUS"
|
|
depends on BROKEN
|
|
help
|
|
Select APUS if configuring for a PowerUP Amiga.
|
|
More information is available at:
|
|
<http://linux-apus.sourceforge.net/>.
|
|
|
|
config KATANA
|
|
bool "Artesyn-Katana"
|
|
help
|
|
Select KATANA if configuring an Artesyn KATANA 750i or 3750
|
|
cPCI board.
|
|
|
|
config WILLOW
|
|
bool "Cogent-Willow"
|
|
|
|
config CPCI690
|
|
bool "Force-CPCI690"
|
|
help
|
|
Select CPCI690 if configuring a Force CPCI690 cPCI board.
|
|
|
|
config POWERPMC250
|
|
bool "Force-PowerPMC250"
|
|
|
|
config CHESTNUT
|
|
bool "IBM 750FX Eval board or 750GX Eval board"
|
|
help
|
|
Select CHESTNUT if configuring an IBM 750FX Eval Board or a
|
|
IBM 750GX Eval board.
|
|
|
|
config SPRUCE
|
|
bool "IBM-Spruce"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config HDPU
|
|
bool "Sky-HDPU"
|
|
help
|
|
Select HDPU if configuring a Sky Computers Compute Blade.
|
|
|
|
config HDPU_FEATURES
|
|
depends HDPU
|
|
tristate "HDPU-Features"
|
|
help
|
|
Select to enable HDPU enhanced features.
|
|
|
|
config EV64260
|
|
bool "Marvell-EV64260BP"
|
|
help
|
|
Select EV64260 if configuring a Marvell (formerly Galileo)
|
|
EV64260BP Evaluation platform.
|
|
|
|
config LOPEC
|
|
bool "Motorola-LoPEC"
|
|
select PPC_I8259
|
|
|
|
config MVME5100
|
|
bool "Motorola-MVME5100"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PPLUS
|
|
bool "Motorola-PowerPlus"
|
|
select PPC_I8259
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PRPMC750
|
|
bool "Motorola-PrPMC750"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PRPMC800
|
|
bool "Motorola-PrPMC800"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config SANDPOINT
|
|
bool "Motorola-Sandpoint"
|
|
select PPC_I8259
|
|
help
|
|
Select SANDPOINT if configuring for a Motorola Sandpoint X3
|
|
(any flavor).
|
|
|
|
config RADSTONE_PPC7D
|
|
bool "Radstone Technology PPC7D board"
|
|
select PPC_I8259
|
|
|
|
config PAL4
|
|
bool "SBS-Palomar4"
|
|
|
|
config GEMINI
|
|
bool "Synergy-Gemini"
|
|
depends on BROKEN
|
|
select PPC_INDIRECT_PCI
|
|
help
|
|
Select Gemini if configuring for a Synergy Microsystems' Gemini
|
|
series Single Board Computer. More information is available at:
|
|
<http://www.synergymicro.com/PressRel/97_10_15.html>.
|
|
|
|
config EST8260
|
|
bool "EST8260"
|
|
---help---
|
|
The EST8260 is a single-board computer manufactured by Wind River
|
|
Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
|
|
the MPC8260. Wind River Systems has a website at
|
|
<http://www.windriver.com/>, but the EST8260 cannot be found on it
|
|
and has probably been discontinued or rebadged.
|
|
|
|
config SBC82xx
|
|
bool "SBC82xx"
|
|
---help---
|
|
SBC PowerQUICC II, single-board computer with MPC82xx CPU
|
|
Manufacturer: Wind River Systems, Inc.
|
|
Date of Release: May 2003
|
|
End of Life: -
|
|
URL: <http://www.windriver.com/>
|
|
|
|
config SBS8260
|
|
bool "SBS8260"
|
|
|
|
config RPX8260
|
|
bool "RPXSUPER"
|
|
|
|
config TQM8260
|
|
bool "TQM8260"
|
|
---help---
|
|
MPC8260 based module, little larger than credit card,
|
|
up to 128 MB global + 64 MB local RAM, 32 MB Flash,
|
|
32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
|
|
2 x serial ports, ...
|
|
Manufacturer: TQ Components, www.tq-group.de
|
|
Date of Release: June 2001
|
|
End of Life: not yet :-)
|
|
URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
|
|
|
|
config ADS8272
|
|
bool "ADS8272"
|
|
|
|
config PQ2FADS
|
|
bool "Freescale-PQ2FADS"
|
|
help
|
|
Select PQ2FADS if you wish to configure for a Freescale
|
|
PQ2FADS board (-VR or -ZU).
|
|
|
|
config LITE5200
|
|
bool "Freescale LITE5200 / (IceCube)"
|
|
select PPC_MPC52xx
|
|
help
|
|
Support for the LITE5200 dev board for the MPC5200 from Freescale.
|
|
This is for the LITE5200 version 2.0 board. Don't know if it changes
|
|
much but it's only been tested on this board version. I think this
|
|
board is also known as IceCube.
|
|
|
|
config MPC834x_SYS
|
|
bool "Freescale MPC834x SYS"
|
|
help
|
|
This option enables support for the MPC 834x SYS evaluation board.
|
|
|
|
Be aware that PCI buses can only function when SYS board is plugged
|
|
into the PIB (Platform IO Board) board from Freescale which provide
|
|
3 PCI slots. The PIBs PCI initialization is the bootloader's
|
|
responsiblilty.
|
|
|
|
config EV64360
|
|
bool "Marvell-EV64360BP"
|
|
help
|
|
Select EV64360 if configuring a Marvell EV64360BP Evaluation
|
|
platform.
|
|
endchoice
|
|
|
|
config PQ2ADS
|
|
bool
|
|
depends on ADS8272
|
|
default y
|
|
|
|
config TQM8xxL
|
|
bool
|
|
depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
|
|
default y
|
|
|
|
config EMBEDDEDBOOT
|
|
bool
|
|
depends on 8xx || 8260
|
|
default y
|
|
|
|
config PPC_MPC52xx
|
|
bool
|
|
|
|
config 8260
|
|
bool "CPM2 Support" if WILLOW
|
|
depends on 6xx
|
|
default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
|
|
help
|
|
The MPC8260 is a typical embedded CPU made by Motorola. Selecting
|
|
this option means that you wish to build a kernel for a machine with
|
|
an 8260 class CPU.
|
|
|
|
config 8272
|
|
bool
|
|
depends on 6xx
|
|
default y if ADS8272
|
|
select 8260
|
|
help
|
|
The MPC8272 CPM has a different internal dpram setup than other CPM2
|
|
devices
|
|
|
|
config 83xx
|
|
bool
|
|
default y if MPC834x_SYS
|
|
|
|
config MPC834x
|
|
bool
|
|
default y if MPC834x_SYS
|
|
|
|
config PPC_83xx
|
|
bool
|
|
default y if 83xx
|
|
|
|
config CPM1
|
|
bool
|
|
depends on 8xx
|
|
default y
|
|
help
|
|
The CPM1 (Communications Processor Module) is a coprocessor on
|
|
embedded CPUs made by Motorola. Selecting this option means that
|
|
you wish to build a kernel for a machine with a CPM1 coprocessor
|
|
on it (8xx, 827x, 8560).
|
|
|
|
config CPM2
|
|
bool
|
|
depends on 8260 || MPC8560 || MPC8555
|
|
default y
|
|
help
|
|
The CPM2 (Communications Processor Module) is a coprocessor on
|
|
embedded CPUs made by Motorola. Selecting this option means that
|
|
you wish to build a kernel for a machine with a CPM2 coprocessor
|
|
on it (826x, 827x, 8560).
|
|
|
|
config PPC_CHRP
|
|
bool "Support for CHRP (Common Hardware Reference Platform) machines"
|
|
depends on PPC_MULTIPLATFORM
|
|
select PPC_I8259
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config PPC_PREP
|
|
bool "Support for PReP (PowerPC Reference Platform) machines"
|
|
depends on PPC_MULTIPLATFORM
|
|
select PPC_I8259
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config PPC_OF
|
|
bool
|
|
depends on PPC_CHRP
|
|
default y
|
|
|
|
config PPC_GEN550
|
|
bool
|
|
depends on SANDPOINT || SPRUCE || PPLUS || \
|
|
PRPMC750 || PRPMC800 || LOPEC || \
|
|
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
|
|
83xx
|
|
default y
|
|
|
|
config FORCE
|
|
bool
|
|
depends on 6xx && POWERPMC250
|
|
default y
|
|
|
|
config GT64260
|
|
bool
|
|
depends on EV64260 || CPCI690
|
|
default y
|
|
|
|
config MV64360 # Really MV64360 & MV64460
|
|
bool
|
|
depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
|
|
default y
|
|
|
|
config MV64X60
|
|
bool
|
|
depends on (GT64260 || MV64360)
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
menu "Set bridge options"
|
|
depends on MV64X60
|
|
|
|
config NOT_COHERENT_CACHE
|
|
bool "Turn off Cache Coherency"
|
|
default n
|
|
help
|
|
Some 64x60 bridges lock up when trying to enforce cache coherency.
|
|
When this option is selected, cache coherency will be turned off.
|
|
Note that this can cause other problems (e.g., stale data being
|
|
speculatively loaded via a cached mapping). Use at your own risk.
|
|
|
|
config MV64X60_BASE
|
|
hex "Set bridge base used by firmware"
|
|
default "0xf1000000"
|
|
help
|
|
A firmware can leave the base address of the bridge's registers at
|
|
a non-standard location. If so, set this value to reflect the
|
|
address of that non-standard location.
|
|
|
|
config MV64X60_NEW_BASE
|
|
hex "Set bridge base used by kernel"
|
|
default "0xf1000000"
|
|
help
|
|
If the current base address of the bridge's registers is not where
|
|
you want it, set this value to the address that you want it moved to.
|
|
|
|
endmenu
|
|
|
|
config NONMONARCH_SUPPORT
|
|
bool "Enable Non-Monarch Support"
|
|
depends on PRPMC800
|
|
|
|
config HARRIER
|
|
bool
|
|
depends on PRPMC800
|
|
default y
|
|
|
|
config EPIC_SERIAL_MODE
|
|
bool
|
|
depends on 6xx && (LOPEC || SANDPOINT)
|
|
default y
|
|
|
|
config MPC10X_BRIDGE
|
|
bool
|
|
depends on POWERPMC250 || LOPEC || SANDPOINT
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config MPC10X_OPENPIC
|
|
bool
|
|
depends on POWERPMC250 || LOPEC || SANDPOINT
|
|
default y
|
|
|
|
config MPC10X_STORE_GATHERING
|
|
bool "Enable MPC10x store gathering"
|
|
depends on MPC10X_BRIDGE
|
|
|
|
config SANDPOINT_ENABLE_UART1
|
|
bool "Enable DUART mode on Sandpoint"
|
|
depends on SANDPOINT
|
|
help
|
|
If this option is enabled then the MPC824x processor will run
|
|
in DUART mode instead of UART mode.
|
|
|
|
config HARRIER_STORE_GATHERING
|
|
bool "Enable Harrier store gathering"
|
|
depends on HARRIER
|
|
|
|
config MVME5100_IPMC761_PRESENT
|
|
bool "MVME5100 configured with an IPMC761"
|
|
depends on MVME5100
|
|
select PPC_I8259
|
|
|
|
config SPRUCE_BAUD_33M
|
|
bool "Spruce baud clock support"
|
|
depends on SPRUCE
|
|
|
|
config PC_KEYBOARD
|
|
bool "PC PS/2 style Keyboard"
|
|
depends on 4xx || CPM2
|
|
|
|
config PPCBUG_NVRAM
|
|
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
|
|
default y if PPC_PREP
|
|
|
|
config SMP
|
|
depends on PPC_STD_MMU
|
|
bool "Symmetric multi-processing support"
|
|
---help---
|
|
This enables support for systems with more than one CPU. If you have
|
|
a system with only one CPU, say N. If you have a system with more
|
|
than one CPU, say Y. Note that the kernel does not currently
|
|
support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
|
|
since they have inadequate hardware support for multiprocessor
|
|
operation.
|
|
|
|
If you say N here, the kernel will run on single and multiprocessor
|
|
machines, but will use only one CPU of a multiprocessor machine. If
|
|
you say Y here, the kernel will run on single-processor machines.
|
|
On a single-processor machine, the kernel will run faster if you say
|
|
N here.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
config IRQ_ALL_CPUS
|
|
bool "Distribute interrupts on all CPUs by default"
|
|
depends on SMP && !MV64360
|
|
help
|
|
This option gives the kernel permission to distribute IRQs across
|
|
multiple CPUs. Saying N here will route all IRQs to the first
|
|
CPU. Generally saying Y is safe, although some problems have been
|
|
reported with SMP Power Macintoshes with this option enabled.
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-32)"
|
|
range 2 32
|
|
depends on SMP
|
|
default "4"
|
|
|
|
config HIGHMEM
|
|
bool "High memory support"
|
|
|
|
source kernel/Kconfig.hz
|
|
source kernel/Kconfig.preempt
|
|
source "mm/Kconfig"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
config PROC_DEVICETREE
|
|
bool "Support for Open Firmware device tree in /proc"
|
|
depends on PPC_OF && PROC_FS
|
|
help
|
|
This option adds a device-tree directory under /proc which contains
|
|
an image of the device tree that the kernel copies from Open
|
|
Firmware. If unsure, say Y here.
|
|
|
|
config PREP_RESIDUAL
|
|
bool "Support for PReP Residual Data"
|
|
depends on PPC_PREP
|
|
help
|
|
Some PReP systems have residual data passed to the kernel by the
|
|
firmware. This allows detection of memory size, devices present and
|
|
other useful pieces of information. Sometimes this information is
|
|
not present or incorrect, in which case it could lead to the machine
|
|
behaving incorrectly. If this happens, either disable PREP_RESIDUAL
|
|
or pass the 'noresidual' option to the kernel.
|
|
|
|
If you are running a PReP system, say Y here, otherwise say N.
|
|
|
|
config PROC_PREPRESIDUAL
|
|
bool "Support for reading of PReP Residual Data in /proc"
|
|
depends on PREP_RESIDUAL && PROC_FS
|
|
help
|
|
Enabling this option will create a /proc/residual file which allows
|
|
you to get at the residual data on PReP systems. You will need a tool
|
|
(lsresidual) to parse it. If you aren't on a PReP system, you don't
|
|
want this.
|
|
|
|
config CMDLINE_BOOL
|
|
bool "Default bootloader kernel arguments"
|
|
|
|
config CMDLINE
|
|
string "Initial kernel command string"
|
|
depends on CMDLINE_BOOL
|
|
default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
|
|
help
|
|
On some platforms, there is currently no way for the boot loader to
|
|
pass arguments to the kernel. For these platforms, you can supply
|
|
some command-line options at build time by entering them here. In
|
|
most cases you will need to specify the root device here.
|
|
|
|
config AMIGA
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
help
|
|
This option enables support for the Amiga series of computers.
|
|
|
|
config ZORRO
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
help
|
|
This enables support for the Zorro bus in the Amiga. If you have
|
|
expansion cards in your Amiga that conform to the Amiga
|
|
AutoConfig(tm) specification, say Y, otherwise N. Note that even
|
|
expansion cards that do not fit in the Zorro slots but fit in e.g.
|
|
the CPU slot may fall in this category, so you have to say Y to let
|
|
Linux use these.
|
|
|
|
config ABSTRACT_CONSOLE
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
|
|
config APUS_FAST_EXCEPT
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
|
|
config AMIGA_PCMCIA
|
|
bool "Amiga 1200/600 PCMCIA support"
|
|
depends on APUS && EXPERIMENTAL
|
|
help
|
|
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
|
|
600. If you intend to use pcmcia cards say Y; otherwise say N.
|
|
|
|
config AMIGA_BUILTIN_SERIAL
|
|
tristate "Amiga builtin serial support"
|
|
depends on APUS
|
|
help
|
|
If you want to use your Amiga's built-in serial port in Linux,
|
|
answer Y.
|
|
|
|
To compile this driver as a module, choose M here.
|
|
|
|
config GVPIOEXT
|
|
tristate "GVP IO-Extender support"
|
|
depends on APUS
|
|
help
|
|
If you want to use a GVP IO-Extender serial card in Linux, say Y.
|
|
Otherwise, say N.
|
|
|
|
config GVPIOEXT_LP
|
|
tristate "GVP IO-Extender parallel printer support"
|
|
depends on GVPIOEXT
|
|
help
|
|
Say Y to enable driving a printer from the parallel port on your
|
|
GVP IO-Extender card, N otherwise.
|
|
|
|
config GVPIOEXT_PLIP
|
|
tristate "GVP IO-Extender PLIP support"
|
|
depends on GVPIOEXT
|
|
help
|
|
Say Y to enable doing IP over the parallel port on your GVP
|
|
IO-Extender card, N otherwise.
|
|
|
|
config MULTIFACE_III_TTY
|
|
tristate "Multiface Card III serial support"
|
|
depends on APUS
|
|
help
|
|
If you want to use a Multiface III card's serial port in Linux,
|
|
answer Y.
|
|
|
|
To compile this driver as a module, choose M here.
|
|
|
|
config A2232
|
|
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && APUS
|
|
---help---
|
|
This option supports the 2232 7-port serial card shipped with the
|
|
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
|
|
a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
|
|
each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
|
|
ports were connected with 8 pin DIN connectors on the card bracket,
|
|
for which 8 pin to DB25 adapters were supplied. The card also had
|
|
jumpers internally to toggle various pinning configurations.
|
|
|
|
This driver can be built as a module; but then "generic_serial"
|
|
will also be built as a module. This has to be loaded before
|
|
"ser_a2232". If you want to do this, answer M here.
|
|
|
|
config WHIPPET_SERIAL
|
|
tristate "Hisoft Whippet PCMCIA serial support"
|
|
depends on AMIGA_PCMCIA
|
|
help
|
|
HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
|
|
is no listing for the Whippet in their Amiga section.
|
|
|
|
config APNE
|
|
tristate "PCMCIA NE2000 support"
|
|
depends on AMIGA_PCMCIA
|
|
help
|
|
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
|
|
say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called apne.
|
|
|
|
config SERIAL_CONSOLE
|
|
bool "Support for serial port console"
|
|
depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
|
|
|
|
config HEARTBEAT
|
|
bool "Use power LED as a heartbeat"
|
|
depends on APUS
|
|
help
|
|
Use the power-on LED on your machine as a load meter. The exact
|
|
behavior is platform-dependent, but normally the flash frequency is
|
|
a hyperbolic function of the 5-minute load average.
|
|
|
|
config PROC_HARDWARE
|
|
bool "/proc/hardware support"
|
|
depends on APUS
|
|
|
|
source "drivers/zorro/Kconfig"
|
|
|
|
if !44x || BROKEN
|
|
source kernel/power/Kconfig
|
|
endif
|
|
|
|
config SECCOMP
|
|
bool "Enable seccomp to safely compute untrusted bytecode"
|
|
depends on PROC_FS
|
|
default y
|
|
help
|
|
This kernel feature is useful for number crunching applications
|
|
that may need to compute untrusted bytecode during their
|
|
execution. By using pipes or other transports made available to
|
|
the process as file descriptors supporting the read/write
|
|
syscalls, it's possible to isolate those applications in
|
|
their own address space using seccomp. Once seccomp is
|
|
enabled via /proc/<pid>/seccomp, it cannot be disabled
|
|
and the task is only allowed to execute a few safe syscalls
|
|
defined by each seccomp mode.
|
|
|
|
If unsure, say Y. Only embedded should say N here.
|
|
|
|
endmenu
|
|
|
|
config ISA_DMA_API
|
|
bool
|
|
default y
|
|
|
|
menu "Bus options"
|
|
|
|
config ISA
|
|
bool "Support for ISA-bus hardware"
|
|
depends on PPC_PREP || PPC_CHRP
|
|
select PPC_I8259
|
|
help
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
inside your box. If you have an Apple machine, say N here; if you
|
|
have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
|
|
you have an embedded board, consult your board documentation.
|
|
|
|
config GENERIC_ISA_DMA
|
|
bool
|
|
depends on POWER3 || 6xx && !CPM2
|
|
default y
|
|
|
|
config PPC_I8259
|
|
bool
|
|
default y if 85xx
|
|
default n
|
|
|
|
config PPC_INDIRECT_PCI
|
|
bool
|
|
depends on PCI
|
|
default y if 40x || 44x || 85xx || 83xx
|
|
default n
|
|
|
|
config EISA
|
|
bool
|
|
help
|
|
The Extended Industry Standard Architecture (EISA) bus is a bus
|
|
architecture used on some older intel-based PCs.
|
|
|
|
config SBUS
|
|
bool
|
|
|
|
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
|
|
config MCA
|
|
bool
|
|
|
|
config PCI
|
|
bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
|
|
default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
|
|
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
|
|
default PCI_QSPAN if !4xx && !CPM2 && 8xx
|
|
help
|
|
Find out whether your system includes a PCI bus. PCI is the name of
|
|
a bus system, i.e. the way the CPU talks to the other stuff inside
|
|
your box. If you say Y here, the kernel will include drivers and
|
|
infrastructure code to support PCI bus devices.
|
|
|
|
config PCI_DOMAINS
|
|
bool
|
|
default PCI
|
|
|
|
config MPC83xx_PCI2
|
|
bool " Supprt for 2nd PCI host controller"
|
|
depends on PCI && MPC834x
|
|
default y if MPC834x_SYS
|
|
|
|
config PCI_QSPAN
|
|
bool "QSpan PCI"
|
|
depends on !4xx && !CPM2 && 8xx
|
|
select PPC_I8259
|
|
help
|
|
Say Y here if you have a system based on a Motorola 8xx-series
|
|
embedded processor with a QSPAN PCI interface, otherwise say N.
|
|
|
|
config PCI_8260
|
|
bool
|
|
depends on PCI && 8260
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config 8260_PCI9
|
|
bool " Enable workaround for MPC826x erratum PCI 9"
|
|
depends on PCI_8260 && !ADS8272
|
|
default y
|
|
|
|
choice
|
|
prompt " IDMA channel for PCI 9 workaround"
|
|
depends on 8260_PCI9
|
|
|
|
config 8260_PCI9_IDMA1
|
|
bool "IDMA1"
|
|
|
|
config 8260_PCI9_IDMA2
|
|
bool "IDMA2"
|
|
|
|
config 8260_PCI9_IDMA3
|
|
bool "IDMA3"
|
|
|
|
config 8260_PCI9_IDMA4
|
|
bool "IDMA4"
|
|
|
|
endchoice
|
|
|
|
config PCI_PERMEDIA
|
|
bool "PCI for Permedia2"
|
|
depends on !4xx && !8xx && APUS
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
config RAPIDIO
|
|
bool "RapidIO support" if MPC8540 || MPC8560
|
|
help
|
|
If you say Y here, the kernel will include drivers and
|
|
infrastructure code to support RapidIO interconnect devices.
|
|
|
|
source "drivers/rapidio/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Advanced setup"
|
|
|
|
config ADVANCED_OPTIONS
|
|
bool "Prompt for advanced kernel configuration options"
|
|
help
|
|
This option will enable prompting for a variety of advanced kernel
|
|
configuration options. These options can cause the kernel to not
|
|
work if they are set incorrectly, but can be used to optimize certain
|
|
aspects of kernel memory management.
|
|
|
|
Unless you know what you are doing, say N here.
|
|
|
|
comment "Default settings for advanced configuration options are used"
|
|
depends on !ADVANCED_OPTIONS
|
|
|
|
config HIGHMEM_START_BOOL
|
|
bool "Set high memory pool address"
|
|
depends on ADVANCED_OPTIONS && HIGHMEM
|
|
help
|
|
This option allows you to set the base address of the kernel virtual
|
|
area used to map high memory pages. This can be useful in
|
|
optimizing the layout of kernel virtual memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config HIGHMEM_START
|
|
hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
|
|
default "0xfe000000"
|
|
|
|
config LOWMEM_SIZE_BOOL
|
|
bool "Set maximum low memory"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the maximum amount of memory which
|
|
will be used as "low memory", that is, memory which the kernel can
|
|
access directly, without having to set up a kernel virtual mapping.
|
|
This can be useful in optimizing the layout of kernel virtual
|
|
memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config LOWMEM_SIZE
|
|
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
|
|
default "0x30000000"
|
|
|
|
config KERNEL_START_BOOL
|
|
bool "Set custom kernel base address"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the kernel virtual address at which
|
|
the kernel will map low memory (the kernel image will be linked at
|
|
this address). This can be useful in optimizing the virtual memory
|
|
layout of the system.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config KERNEL_START
|
|
hex "Virtual address of kernel base" if KERNEL_START_BOOL
|
|
default "0xc0000000"
|
|
|
|
config TASK_SIZE_BOOL
|
|
bool "Set custom user task size"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the amount of virtual address space
|
|
allocated to user tasks. This can be useful in optimizing the
|
|
virtual memory layout of the system.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config TASK_SIZE
|
|
hex "Size of user task space" if TASK_SIZE_BOOL
|
|
default "0x80000000"
|
|
|
|
config CONSISTENT_START_BOOL
|
|
bool "Set custom consistent memory pool address"
|
|
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
|
|
help
|
|
This option allows you to set the base virtual address
|
|
of the the consistent memory pool. This pool of virtual
|
|
memory is used to make consistent memory allocations.
|
|
|
|
config CONSISTENT_START
|
|
hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
|
|
default "0xff100000" if NOT_COHERENT_CACHE
|
|
|
|
config CONSISTENT_SIZE_BOOL
|
|
bool "Set custom consistent memory pool size"
|
|
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
|
|
help
|
|
This option allows you to set the size of the the
|
|
consistent memory pool. This pool of virtual memory
|
|
is used to make consistent memory allocations.
|
|
|
|
config CONSISTENT_SIZE
|
|
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
|
|
default "0x00200000" if NOT_COHERENT_CACHE
|
|
|
|
config BOOT_LOAD_BOOL
|
|
bool "Set the boot link/load address"
|
|
depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
|
|
help
|
|
This option allows you to set the initial load address of the zImage
|
|
or zImage.initrd file. This can be useful if you are on a board
|
|
which has a small amount of memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config BOOT_LOAD
|
|
hex "Link/load address for booting" if BOOT_LOAD_BOOL
|
|
default "0x00400000" if 40x || 8xx || 8260
|
|
default "0x01000000" if 44x
|
|
default "0x00800000"
|
|
|
|
config PIN_TLB
|
|
bool "Pinned Kernel TLBs (860 ONLY)"
|
|
depends on ADVANCED_OPTIONS && 8xx
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/ppc/8xx_io/Kconfig"
|
|
|
|
source "arch/ppc/8260_io/Kconfig"
|
|
|
|
|
|
menu "IBM 40x options"
|
|
depends on 40x
|
|
|
|
config SERIAL_SICC
|
|
bool "SICC Serial port"
|
|
depends on STB03xxx
|
|
|
|
config UART1_DFLT_CONSOLE
|
|
bool
|
|
depends on SERIAL_SICC && UART0_TTYS1
|
|
default y
|
|
|
|
config SERIAL_SICC_CONSOLE
|
|
bool
|
|
depends on SERIAL_SICC && UART0_TTYS1
|
|
default y
|
|
|
|
endmenu
|
|
|
|
source "lib/Kconfig"
|
|
|
|
source "arch/powerpc/oprofile/Kconfig"
|
|
|
|
source "arch/ppc/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|