WSL2-Linux-Kernel/drivers/serial
Marc St-Jean beab697ab4 serial driver PMC MSP71xx
Serial driver patch for the PMC-Sierra MSP71xx devices.

There are three different fixes:

1 Fix for DesignWare APB THRE errata: In brief, this is a non-standard
  16550 in that the THRE interrupt will not re-assert itself simply by
  disabling and re-enabling the THRI bit in the IER, it is only re-enabled
  if a character is actually sent out.

  It appears that the "8250-uart-backup-timer.patch" in the "mm" tree
  also fixes it so we have dropped our initial workaround.  This patch now
  needs to be applied on top of that "mm" patch.

2 Fix for Busy Detect on LCR write: The DesignWare APB UART has a feature
  which causes a new Busy Detect interrupt to be generated if it's busy
  when the LCR is written.  This fix saves the value of the LCR and
  rewrites it after clearing the interrupt.

3 Workaround for interrupt/data concurrency issue: The SoC needs to
  ensure that writes that can cause interrupts to be cleared reach the UART
  before returning from the ISR.  This fix reads a non-destructive register
  on the UART so the read transaction completion ensures the previously
  queued write transaction has also completed.

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
..
cpm_uart [POWERPC] Fix compile failure in cpm_uart_cpm2 2007-02-16 14:00:19 +11:00
jsm [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
8250.c serial driver PMC MSP71xx 2007-05-07 12:12:50 -07:00
8250.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
8250_accent.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_acorn.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
8250_au1x00.c [SERIAL] AMD Alchemy UART: claim memory range 2006-04-30 11:15:58 +01:00
8250_boca.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_early.c [SERIAL] kernel console should send CRLF not LFCR 2006-03-20 20:00:09 +00:00
8250_exar_st16c554.c [PATCH] Exar quad port serial 2006-12-07 08:39:35 -08:00
8250_fourport.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_gsc.c [PARISC] Clean up asm-parisc/serial.h 2006-10-04 06:47:03 -06:00
8250_hp300.c [PATCH] hp300: fix driver_register() return handling, remove dio_module_init() 2006-03-25 08:22:53 -08:00
8250_hub6.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_mca.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
8250_pci.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
8250_pnp.c [PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c 2007-03-23 11:01:22 -07:00
21285.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
68360serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
Kconfig Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2007-02-19 13:18:39 -08:00
Makefile [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
amba-pl010.c [ARM] Convert AMBA PL010 driver to use the clk infrastructure 2007-04-22 12:30:41 +01:00
amba-pl011.c [ARM] Fix AMBA serial drivers for non-first serial ports 2007-01-24 11:59:57 +00:00
atmel_serial.c [ARM] 4357/1: AT91: Support slower serial baud-rates 2007-05-03 14:12:45 +01:00
atmel_serial.h [ARM] 4357/1: AT91: Support slower serial baud-rates 2007-05-03 14:12:45 +01:00
clps711x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
crisv10.c [PATCH] Char: tty_wakeup cleanup 2007-02-11 10:51:26 -08:00
crisv10.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
dz.c [PATCH] dz: remove struct pt_regs references 2007-03-05 07:57:51 -08:00
dz.h [PATCH] dz: Fixes to make it work 2006-12-07 08:39:41 -08:00
icom.c Char: icom, mark __init as __devinit 2007-04-24 08:23:09 -07:00
icom.h do not truncate irq number for icom adapter 2007-04-24 08:23:08 -07:00
imx.c [ARM] 4328/1: Move i.MX UART regs to driver 2007-05-03 20:24:21 +01:00
ioc3_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ioc4_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ip22zilog.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
ip22zilog.h
m32r_sio.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
m32r_sio.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
m32r_sio_reg.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
mcfserial.c [PATCH] m68knommu: fix work queues in mcfserial.c driver 2007-03-06 18:08:38 -08:00
mcfserial.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
mpc52xx_uart.c Revert "[POWERPC] Rename get_property to of_get_property: drivers" 2007-04-26 22:24:31 +10:00
mpsc.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
mux.c Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git 2007-02-17 00:18:23 -05:00
netx-serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
of_serial.c Revert "[POWERPC] Rename get_property to of_get_property: drivers" 2007-04-26 22:24:31 +10:00
pmac_zilog.c Revert "[POWERPC] Rename get_property to of_get_property: drivers" 2007-04-26 22:24:31 +10:00
pmac_zilog.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
pxa.c [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX 2007-04-21 23:14:01 +01:00
s3c2410.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
sa1100.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_core.c serial driver PMC MSP71xx 2007-05-07 12:12:50 -07:00
serial_cs.c serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter. 2007-02-16 15:19:16 -08:00
serial_lh7a40x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_txx9.c [SERIAL] serial_txx9 driver update 2007-02-22 00:50:45 +00:00
sh-sci.c serial: Fix sh-sci break interrupt/sysrq handling. 2007-03-14 13:22:37 +09:00
sh-sci.h sh: SH-MobileR SH7722 CPU support. 2006-12-12 08:42:09 +09:00
sn_console.c [PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage 2007-03-08 07:39:15 -08:00
suncore.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
suncore.h
sunhv.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
sunsab.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
sunsab.h [SUNSAB]: Defer register updates until transmitter is idle. 2005-05-11 11:34:32 -07:00
sunsu.c [SPARC/64] constify of_get_property return: drivers 2007-04-26 01:54:27 -07:00
sunzilog.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
sunzilog.h
uartlite.c [PATCH] drivers/serial NULL noise removal 2007-02-09 09:14:06 -08:00
v850e_uart.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
vr41xx_siu.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00