WSL2-Linux-Kernel/arch/powerpc/kvm/book3s_interrupts.S

240 строки
5.5 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
*
* Copyright SUSE Linux Products GmbH 2009
*
* Authors: Alexander Graf <agraf@suse.de>
*/
#include <asm/ppc_asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
#include <asm/exception-64s.h>
#include <asm/asm-compat.h>
#if defined(CONFIG_PPC_BOOK3S_64)
#ifdef CONFIG_PPC64_ELF_ABI_V2
#define FUNC(name) name
#else
#define FUNC(name) GLUE(.,name)
#endif
#define GET_SHADOW_VCPU(reg) addi reg, r13, PACA_SVCPU
#elif defined(CONFIG_PPC_BOOK3S_32)
#define FUNC(name) name
#define GET_SHADOW_VCPU(reg) lwz reg, (THREAD + THREAD_KVM_SVCPU)(r2)
#endif /* CONFIG_PPC_BOOK3S_64 */
#define VCPU_LOAD_NVGPRS(vcpu) \
PPC_LL r14, VCPU_GPR(R14)(vcpu); \
PPC_LL r15, VCPU_GPR(R15)(vcpu); \
PPC_LL r16, VCPU_GPR(R16)(vcpu); \
PPC_LL r17, VCPU_GPR(R17)(vcpu); \
PPC_LL r18, VCPU_GPR(R18)(vcpu); \
PPC_LL r19, VCPU_GPR(R19)(vcpu); \
PPC_LL r20, VCPU_GPR(R20)(vcpu); \
PPC_LL r21, VCPU_GPR(R21)(vcpu); \
PPC_LL r22, VCPU_GPR(R22)(vcpu); \
PPC_LL r23, VCPU_GPR(R23)(vcpu); \
PPC_LL r24, VCPU_GPR(R24)(vcpu); \
PPC_LL r25, VCPU_GPR(R25)(vcpu); \
PPC_LL r26, VCPU_GPR(R26)(vcpu); \
PPC_LL r27, VCPU_GPR(R27)(vcpu); \
PPC_LL r28, VCPU_GPR(R28)(vcpu); \
PPC_LL r29, VCPU_GPR(R29)(vcpu); \
PPC_LL r30, VCPU_GPR(R30)(vcpu); \
PPC_LL r31, VCPU_GPR(R31)(vcpu); \
/*****************************************************************************
* *
* Guest entry / exit code that is in kernel module memory (highmem) *
* *
****************************************************************************/
/* Registers:
* r3: vcpu pointer
*/
_GLOBAL(__kvmppc_vcpu_run)
kvm_start_entry:
/* Write correct stack frame */
mflr r0
PPC_STL r0,PPC_LR_STKOFF(r1)
/* Save host state to the stack */
PPC_STLU r1, -SWITCH_FRAME_SIZE(r1)
/* Save r3 (vcpu) */
SAVE_GPR(3, r1)
/* Save non-volatile registers (r14 - r31) */
SAVE_NVGPRS(r1)
/* Save CR */
mfcr r14
stw r14, _CCR(r1)
/* Save LR */
PPC_STL r0, _LINK(r1)
/* Load non-volatile guest state from the vcpu */
VCPU_LOAD_NVGPRS(r3)
kvm_start_lightweight:
/* Copy registers into shadow vcpu so we can access them in real mode */
bl FUNC(kvmppc_copy_to_svcpu)
nop
REST_GPR(3, r1)
#ifdef CONFIG_PPC_BOOK3S_64
/* Get the dcbz32 flag */
PPC_LL r0, VCPU_HFLAGS(r3)
rldicl r0, r0, 0, 63 /* r3 &= 1 */
stb r0, HSTATE_RESTORE_HID5(r13)
/* Load up guest SPRG3 value, since it's user readable */
lbz r4, VCPU_SHAREDBE(r3)
cmpwi r4, 0
ld r5, VCPU_SHARED(r3)
beq sprg3_little_endian
sprg3_big_endian:
#ifdef __BIG_ENDIAN__
ld r4, VCPU_SHARED_SPRG3(r5)
#else
addi r5, r5, VCPU_SHARED_SPRG3
ldbrx r4, 0, r5
#endif
b after_sprg3_load
sprg3_little_endian:
#ifdef __LITTLE_ENDIAN__
ld r4, VCPU_SHARED_SPRG3(r5)
#else
addi r5, r5, VCPU_SHARED_SPRG3
ldbrx r4, 0, r5
#endif
after_sprg3_load:
mtspr SPRN_SPRG3, r4
#endif /* CONFIG_PPC_BOOK3S_64 */
PPC_LL r4, VCPU_SHADOW_MSR(r3) /* get shadow_msr */
/* Jump to segment patching handler and into our guest */
bl FUNC(kvmppc_entry_trampoline)
nop
/*
* This is the handler in module memory. It gets jumped at from the
* lowmem trampoline code, so it's basically the guest exit code.
*
*/
/*
* Register usage at this point:
*
* R1 = host R1
* R2 = host R2
* R12 = exit handler id
* R13 = PACA
* SVCPU.* = guest *
* MSR.EE = 1
*
*/
PPC_LL r3, GPR3(r1) /* vcpu pointer */
/*
* kvmppc_copy_from_svcpu can clobber volatile registers, save
* the exit handler id to the vcpu and restore it from there later.
*/
stw r12, VCPU_TRAP(r3)
/* Transfer reg values from shadow vcpu back to vcpu struct */
bl FUNC(kvmppc_copy_from_svcpu)
nop
#ifdef CONFIG_PPC_BOOK3S_64
/*
* Reload kernel SPRG3 value.
* No need to save guest value as usermode can't modify SPRG3.
*/
ld r3, PACA_SPRG_VDSO(r13)
mtspr SPRN_SPRG_VDSO_WRITE, r3
#endif /* CONFIG_PPC_BOOK3S_64 */
/* R7 = vcpu */
PPC_LL r7, GPR3(r1)
PPC_STL r14, VCPU_GPR(R14)(r7)
PPC_STL r15, VCPU_GPR(R15)(r7)
PPC_STL r16, VCPU_GPR(R16)(r7)
PPC_STL r17, VCPU_GPR(R17)(r7)
PPC_STL r18, VCPU_GPR(R18)(r7)
PPC_STL r19, VCPU_GPR(R19)(r7)
PPC_STL r20, VCPU_GPR(R20)(r7)
PPC_STL r21, VCPU_GPR(R21)(r7)
PPC_STL r22, VCPU_GPR(R22)(r7)
PPC_STL r23, VCPU_GPR(R23)(r7)
PPC_STL r24, VCPU_GPR(R24)(r7)
PPC_STL r25, VCPU_GPR(R25)(r7)
PPC_STL r26, VCPU_GPR(R26)(r7)
PPC_STL r27, VCPU_GPR(R27)(r7)
PPC_STL r28, VCPU_GPR(R28)(r7)
PPC_STL r29, VCPU_GPR(R29)(r7)
PPC_STL r30, VCPU_GPR(R30)(r7)
PPC_STL r31, VCPU_GPR(R31)(r7)
/* Pass the exit number as 2nd argument to kvmppc_handle_exit */
lwz r4, VCPU_TRAP(r7)
/* Restore r3 (vcpu) */
REST_GPR(3, r1)
bl FUNC(kvmppc_handle_exit_pr)
/* If RESUME_GUEST, get back in the loop */
cmpwi r3, RESUME_GUEST
beq kvm_loop_lightweight
cmpwi r3, RESUME_GUEST_NV
beq kvm_loop_heavyweight
kvm_exit_loop:
PPC_LL r4, _LINK(r1)
mtlr r4
lwz r14, _CCR(r1)
mtcr r14
/* Restore non-volatile host registers (r14 - r31) */
REST_NVGPRS(r1)
addi r1, r1, SWITCH_FRAME_SIZE
blr
kvm_loop_heavyweight:
PPC_LL r4, _LINK(r1)
PPC_STL r4, (PPC_LR_STKOFF + SWITCH_FRAME_SIZE)(r1)
/* Load vcpu */
REST_GPR(3, r1)
/* Load non-volatile guest state from the vcpu */
VCPU_LOAD_NVGPRS(r3)
/* Jump back into the beginning of this function */
b kvm_start_lightweight
kvm_loop_lightweight:
/* We'll need the vcpu pointer */
REST_GPR(3, r1)
/* Jump back into the beginning of this function */
b kvm_start_lightweight