416 строки
15 KiB
C
416 строки
15 KiB
C
/*
|
|
* R8A66597 driver platform data
|
|
*
|
|
* Copyright (C) 2009 Renesas Solutions Corp.
|
|
*
|
|
* Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef __LINUX_USB_R8A66597_H
|
|
#define __LINUX_USB_R8A66597_H
|
|
|
|
#define R8A66597_PLATDATA_XTAL_12MHZ 0x01
|
|
#define R8A66597_PLATDATA_XTAL_24MHZ 0x02
|
|
#define R8A66597_PLATDATA_XTAL_48MHZ 0x03
|
|
|
|
struct r8a66597_platdata {
|
|
/* This callback can control port power instead of DVSTCTR register. */
|
|
void (*port_power)(int port, int power);
|
|
|
|
/* set one = on chip controller, set zero = external controller */
|
|
unsigned on_chip:1;
|
|
|
|
/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
|
|
unsigned xtal:2;
|
|
|
|
/* set one = 3.3V, set zero = 1.5V */
|
|
unsigned vif:1;
|
|
|
|
/* set one = big endian, set zero = little endian */
|
|
unsigned endian:1;
|
|
};
|
|
|
|
/* Register definitions */
|
|
#define SYSCFG0 0x00
|
|
#define SYSCFG1 0x02
|
|
#define SYSSTS0 0x04
|
|
#define SYSSTS1 0x06
|
|
#define DVSTCTR0 0x08
|
|
#define DVSTCTR1 0x0A
|
|
#define TESTMODE 0x0C
|
|
#define PINCFG 0x0E
|
|
#define DMA0CFG 0x10
|
|
#define DMA1CFG 0x12
|
|
#define CFIFO 0x14
|
|
#define D0FIFO 0x18
|
|
#define D1FIFO 0x1C
|
|
#define CFIFOSEL 0x20
|
|
#define CFIFOCTR 0x22
|
|
#define CFIFOSIE 0x24
|
|
#define D0FIFOSEL 0x28
|
|
#define D0FIFOCTR 0x2A
|
|
#define D1FIFOSEL 0x2C
|
|
#define D1FIFOCTR 0x2E
|
|
#define INTENB0 0x30
|
|
#define INTENB1 0x32
|
|
#define INTENB2 0x34
|
|
#define BRDYENB 0x36
|
|
#define NRDYENB 0x38
|
|
#define BEMPENB 0x3A
|
|
#define SOFCFG 0x3C
|
|
#define INTSTS0 0x40
|
|
#define INTSTS1 0x42
|
|
#define INTSTS2 0x44
|
|
#define BRDYSTS 0x46
|
|
#define NRDYSTS 0x48
|
|
#define BEMPSTS 0x4A
|
|
#define FRMNUM 0x4C
|
|
#define UFRMNUM 0x4E
|
|
#define USBADDR 0x50
|
|
#define USBREQ 0x54
|
|
#define USBVAL 0x56
|
|
#define USBINDX 0x58
|
|
#define USBLENG 0x5A
|
|
#define DCPCFG 0x5C
|
|
#define DCPMAXP 0x5E
|
|
#define DCPCTR 0x60
|
|
#define PIPESEL 0x64
|
|
#define PIPECFG 0x68
|
|
#define PIPEBUF 0x6A
|
|
#define PIPEMAXP 0x6C
|
|
#define PIPEPERI 0x6E
|
|
#define PIPE1CTR 0x70
|
|
#define PIPE2CTR 0x72
|
|
#define PIPE3CTR 0x74
|
|
#define PIPE4CTR 0x76
|
|
#define PIPE5CTR 0x78
|
|
#define PIPE6CTR 0x7A
|
|
#define PIPE7CTR 0x7C
|
|
#define PIPE8CTR 0x7E
|
|
#define PIPE9CTR 0x80
|
|
#define PIPE1TRE 0x90
|
|
#define PIPE1TRN 0x92
|
|
#define PIPE2TRE 0x94
|
|
#define PIPE2TRN 0x96
|
|
#define PIPE3TRE 0x98
|
|
#define PIPE3TRN 0x9A
|
|
#define PIPE4TRE 0x9C
|
|
#define PIPE4TRN 0x9E
|
|
#define PIPE5TRE 0xA0
|
|
#define PIPE5TRN 0xA2
|
|
#define DEVADD0 0xD0
|
|
#define DEVADD1 0xD2
|
|
#define DEVADD2 0xD4
|
|
#define DEVADD3 0xD6
|
|
#define DEVADD4 0xD8
|
|
#define DEVADD5 0xDA
|
|
#define DEVADD6 0xDC
|
|
#define DEVADD7 0xDE
|
|
#define DEVADD8 0xE0
|
|
#define DEVADD9 0xE2
|
|
#define DEVADDA 0xE4
|
|
|
|
/* System Configuration Control Register */
|
|
#define XTAL 0xC000 /* b15-14: Crystal selection */
|
|
#define XTAL48 0x8000 /* 48MHz */
|
|
#define XTAL24 0x4000 /* 24MHz */
|
|
#define XTAL12 0x0000 /* 12MHz */
|
|
#define XCKE 0x2000 /* b13: External clock enable */
|
|
#define PLLC 0x0800 /* b11: PLL control */
|
|
#define SCKE 0x0400 /* b10: USB clock enable */
|
|
#define PCSDIS 0x0200 /* b9: not CS wakeup */
|
|
#define LPSME 0x0100 /* b8: Low power sleep mode */
|
|
#define HSE 0x0080 /* b7: Hi-speed enable */
|
|
#define DCFM 0x0040 /* b6: Controller function select */
|
|
#define DRPD 0x0020 /* b5: D+/- pull down control */
|
|
#define DPRPU 0x0010 /* b4: D+ pull up control */
|
|
#define USBE 0x0001 /* b0: USB module operation enable */
|
|
|
|
/* System Configuration Status Register */
|
|
#define OVCBIT 0x8000 /* b15-14: Over-current bit */
|
|
#define OVCMON 0xC000 /* b15-14: Over-current monitor */
|
|
#define SOFEA 0x0020 /* b5: SOF monitor */
|
|
#define IDMON 0x0004 /* b3: ID-pin monitor */
|
|
#define LNST 0x0003 /* b1-0: D+, D- line status */
|
|
#define SE1 0x0003 /* SE1 */
|
|
#define FS_KSTS 0x0002 /* Full-Speed K State */
|
|
#define FS_JSTS 0x0001 /* Full-Speed J State */
|
|
#define LS_JSTS 0x0002 /* Low-Speed J State */
|
|
#define LS_KSTS 0x0001 /* Low-Speed K State */
|
|
#define SE0 0x0000 /* SE0 */
|
|
|
|
/* Device State Control Register */
|
|
#define EXTLP0 0x0400 /* b10: External port */
|
|
#define VBOUT 0x0200 /* b9: VBUS output */
|
|
#define WKUP 0x0100 /* b8: Remote wakeup */
|
|
#define RWUPE 0x0080 /* b7: Remote wakeup sense */
|
|
#define USBRST 0x0040 /* b6: USB reset enable */
|
|
#define RESUME 0x0020 /* b5: Resume enable */
|
|
#define UACT 0x0010 /* b4: USB bus enable */
|
|
#define RHST 0x0007 /* b1-0: Reset handshake status */
|
|
#define HSPROC 0x0004 /* HS handshake is processing */
|
|
#define HSMODE 0x0003 /* Hi-Speed mode */
|
|
#define FSMODE 0x0002 /* Full-Speed mode */
|
|
#define LSMODE 0x0001 /* Low-Speed mode */
|
|
#define UNDECID 0x0000 /* Undecided */
|
|
|
|
/* Test Mode Register */
|
|
#define UTST 0x000F /* b3-0: Test select */
|
|
#define H_TST_PACKET 0x000C /* HOST TEST Packet */
|
|
#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
|
|
#define H_TST_K 0x000A /* HOST TEST K */
|
|
#define H_TST_J 0x0009 /* HOST TEST J */
|
|
#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */
|
|
#define P_TST_PACKET 0x0004 /* PERI TEST Packet */
|
|
#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
|
|
#define P_TST_K 0x0002 /* PERI TEST K */
|
|
#define P_TST_J 0x0001 /* PERI TEST J */
|
|
#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */
|
|
|
|
/* Data Pin Configuration Register */
|
|
#define LDRV 0x8000 /* b15: Drive Current Adjust */
|
|
#define VIF1 0x0000 /* VIF = 1.8V */
|
|
#define VIF3 0x8000 /* VIF = 3.3V */
|
|
#define INTA 0x0001 /* b1: USB INT-pin active */
|
|
|
|
/* DMAx Pin Configuration Register */
|
|
#define DREQA 0x4000 /* b14: Dreq active select */
|
|
#define BURST 0x2000 /* b13: Burst mode */
|
|
#define DACKA 0x0400 /* b10: Dack active select */
|
|
#define DFORM 0x0380 /* b9-7: DMA mode select */
|
|
#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
|
|
#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
|
|
#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
|
|
#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
|
|
#define DENDA 0x0040 /* b6: Dend active select */
|
|
#define PKTM 0x0020 /* b5: Packet mode */
|
|
#define DENDE 0x0010 /* b4: Dend enable */
|
|
#define OBUS 0x0004 /* b2: OUTbus mode */
|
|
|
|
/* CFIFO/DxFIFO Port Select Register */
|
|
#define RCNT 0x8000 /* b15: Read count mode */
|
|
#define REW 0x4000 /* b14: Buffer rewind */
|
|
#define DCLRM 0x2000 /* b13: DMA buffer clear mode */
|
|
#define DREQE 0x1000 /* b12: DREQ output enable */
|
|
#define MBW_8 0x0000 /* 8bit */
|
|
#define MBW_16 0x0400 /* 16bit */
|
|
#define MBW_32 0x0800 /* 32bit */
|
|
#define BIGEND 0x0100 /* b8: Big endian mode */
|
|
#define BYTE_LITTLE 0x0000 /* little dendian */
|
|
#define BYTE_BIG 0x0100 /* big endifan */
|
|
#define ISEL 0x0020 /* b5: DCP FIFO port direction select */
|
|
#define CURPIPE 0x000F /* b2-0: PIPE select */
|
|
|
|
/* CFIFO/DxFIFO Port Control Register */
|
|
#define BVAL 0x8000 /* b15: Buffer valid flag */
|
|
#define BCLR 0x4000 /* b14: Buffer clear */
|
|
#define FRDY 0x2000 /* b13: FIFO ready */
|
|
#define DTLN 0x0FFF /* b11-0: FIFO received data length */
|
|
|
|
/* Interrupt Enable Register 0 */
|
|
#define VBSE 0x8000 /* b15: VBUS interrupt */
|
|
#define RSME 0x4000 /* b14: Resume interrupt */
|
|
#define SOFE 0x2000 /* b13: Frame update interrupt */
|
|
#define DVSE 0x1000 /* b12: Device state transition interrupt */
|
|
#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
|
|
#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
|
|
#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
|
|
#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
|
|
|
|
/* Interrupt Enable Register 1 */
|
|
#define OVRCRE 0x8000 /* b15: Over-current interrupt */
|
|
#define BCHGE 0x4000 /* b14: USB us chenge interrupt */
|
|
#define DTCHE 0x1000 /* b12: Detach sense interrupt */
|
|
#define ATTCHE 0x0800 /* b11: Attach sense interrupt */
|
|
#define EOFERRE 0x0040 /* b6: EOF error interrupt */
|
|
#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
|
|
#define SACKE 0x0010 /* b4: SETUP ACK interrupt */
|
|
|
|
/* BRDY Interrupt Enable/Status Register */
|
|
#define BRDY9 0x0200 /* b9: PIPE9 */
|
|
#define BRDY8 0x0100 /* b8: PIPE8 */
|
|
#define BRDY7 0x0080 /* b7: PIPE7 */
|
|
#define BRDY6 0x0040 /* b6: PIPE6 */
|
|
#define BRDY5 0x0020 /* b5: PIPE5 */
|
|
#define BRDY4 0x0010 /* b4: PIPE4 */
|
|
#define BRDY3 0x0008 /* b3: PIPE3 */
|
|
#define BRDY2 0x0004 /* b2: PIPE2 */
|
|
#define BRDY1 0x0002 /* b1: PIPE1 */
|
|
#define BRDY0 0x0001 /* b1: PIPE0 */
|
|
|
|
/* NRDY Interrupt Enable/Status Register */
|
|
#define NRDY9 0x0200 /* b9: PIPE9 */
|
|
#define NRDY8 0x0100 /* b8: PIPE8 */
|
|
#define NRDY7 0x0080 /* b7: PIPE7 */
|
|
#define NRDY6 0x0040 /* b6: PIPE6 */
|
|
#define NRDY5 0x0020 /* b5: PIPE5 */
|
|
#define NRDY4 0x0010 /* b4: PIPE4 */
|
|
#define NRDY3 0x0008 /* b3: PIPE3 */
|
|
#define NRDY2 0x0004 /* b2: PIPE2 */
|
|
#define NRDY1 0x0002 /* b1: PIPE1 */
|
|
#define NRDY0 0x0001 /* b1: PIPE0 */
|
|
|
|
/* BEMP Interrupt Enable/Status Register */
|
|
#define BEMP9 0x0200 /* b9: PIPE9 */
|
|
#define BEMP8 0x0100 /* b8: PIPE8 */
|
|
#define BEMP7 0x0080 /* b7: PIPE7 */
|
|
#define BEMP6 0x0040 /* b6: PIPE6 */
|
|
#define BEMP5 0x0020 /* b5: PIPE5 */
|
|
#define BEMP4 0x0010 /* b4: PIPE4 */
|
|
#define BEMP3 0x0008 /* b3: PIPE3 */
|
|
#define BEMP2 0x0004 /* b2: PIPE2 */
|
|
#define BEMP1 0x0002 /* b1: PIPE1 */
|
|
#define BEMP0 0x0001 /* b0: PIPE0 */
|
|
|
|
/* SOF Pin Configuration Register */
|
|
#define TRNENSEL 0x0100 /* b8: Select transaction enable period */
|
|
#define BRDYM 0x0040 /* b6: BRDY clear timing */
|
|
#define INTL 0x0020 /* b5: Interrupt sense select */
|
|
#define EDGESTS 0x0010 /* b4: */
|
|
#define SOFMODE 0x000C /* b3-2: SOF pin select */
|
|
#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */
|
|
#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
|
|
#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
|
|
|
|
/* Interrupt Status Register 0 */
|
|
#define VBINT 0x8000 /* b15: VBUS interrupt */
|
|
#define RESM 0x4000 /* b14: Resume interrupt */
|
|
#define SOFR 0x2000 /* b13: SOF frame update interrupt */
|
|
#define DVST 0x1000 /* b12: Device state transition interrupt */
|
|
#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
|
|
#define BEMP 0x0400 /* b10: Buffer empty interrupt */
|
|
#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
|
|
#define BRDY 0x0100 /* b8: Buffer ready interrupt */
|
|
#define VBSTS 0x0080 /* b7: VBUS input port */
|
|
#define DVSQ 0x0070 /* b6-4: Device state */
|
|
#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
|
|
#define DS_SPD_ADDR 0x0060 /* Suspend Address */
|
|
#define DS_SPD_DFLT 0x0050 /* Suspend Default */
|
|
#define DS_SPD_POWR 0x0040 /* Suspend Powered */
|
|
#define DS_SUSP 0x0040 /* Suspend */
|
|
#define DS_CNFG 0x0030 /* Configured */
|
|
#define DS_ADDS 0x0020 /* Address */
|
|
#define DS_DFLT 0x0010 /* Default */
|
|
#define DS_POWR 0x0000 /* Powered */
|
|
#define DVSQS 0x0030 /* b5-4: Device state */
|
|
#define VALID 0x0008 /* b3: Setup packet detected flag */
|
|
#define CTSQ 0x0007 /* b2-0: Control transfer stage */
|
|
#define CS_SQER 0x0006 /* Sequence error */
|
|
#define CS_WRND 0x0005 /* Control write nodata status stage */
|
|
#define CS_WRSS 0x0004 /* Control write status stage */
|
|
#define CS_WRDS 0x0003 /* Control write data stage */
|
|
#define CS_RDSS 0x0002 /* Control read status stage */
|
|
#define CS_RDDS 0x0001 /* Control read data stage */
|
|
#define CS_IDST 0x0000 /* Idle or setup stage */
|
|
|
|
/* Interrupt Status Register 1 */
|
|
#define OVRCR 0x8000 /* b15: Over-current interrupt */
|
|
#define BCHG 0x4000 /* b14: USB bus chenge interrupt */
|
|
#define DTCH 0x1000 /* b12: Detach sense interrupt */
|
|
#define ATTCH 0x0800 /* b11: Attach sense interrupt */
|
|
#define EOFERR 0x0040 /* b6: EOF-error interrupt */
|
|
#define SIGN 0x0020 /* b5: Setup ignore interrupt */
|
|
#define SACK 0x0010 /* b4: Setup acknowledge interrupt */
|
|
|
|
/* Frame Number Register */
|
|
#define OVRN 0x8000 /* b15: Overrun error */
|
|
#define CRCE 0x4000 /* b14: Received data error */
|
|
#define FRNM 0x07FF /* b10-0: Frame number */
|
|
|
|
/* Micro Frame Number Register */
|
|
#define UFRNM 0x0007 /* b2-0: Micro frame number */
|
|
|
|
/* Default Control Pipe Maxpacket Size Register */
|
|
/* Pipe Maxpacket Size Register */
|
|
#define DEVSEL 0xF000 /* b15-14: Device address select */
|
|
#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
|
|
|
|
/* Default Control Pipe Control Register */
|
|
#define BSTS 0x8000 /* b15: Buffer status */
|
|
#define SUREQ 0x4000 /* b14: Send USB request */
|
|
#define CSCLR 0x2000 /* b13: complete-split status clear */
|
|
#define CSSTS 0x1000 /* b12: complete-split status */
|
|
#define SUREQCLR 0x0800 /* b11: stop setup request */
|
|
#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
|
|
#define SQSET 0x0080 /* b7: Sequence toggle bit set */
|
|
#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
|
|
#define PBUSY 0x0020 /* b5: pipe busy */
|
|
#define PINGE 0x0010 /* b4: ping enable */
|
|
#define CCPL 0x0004 /* b2: Enable control transfer complete */
|
|
#define PID 0x0003 /* b1-0: Response PID */
|
|
#define PID_STALL11 0x0003 /* STALL */
|
|
#define PID_STALL 0x0002 /* STALL */
|
|
#define PID_BUF 0x0001 /* BUF */
|
|
#define PID_NAK 0x0000 /* NAK */
|
|
|
|
/* Pipe Window Select Register */
|
|
#define PIPENM 0x0007 /* b2-0: Pipe select */
|
|
|
|
/* Pipe Configuration Register */
|
|
#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */
|
|
#define R8A66597_ISO 0xC000 /* Isochronous */
|
|
#define R8A66597_INT 0x8000 /* Interrupt */
|
|
#define R8A66597_BULK 0x4000 /* Bulk */
|
|
#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */
|
|
#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */
|
|
#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */
|
|
#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */
|
|
#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */
|
|
#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */
|
|
|
|
/* Pipe Buffer Configuration Register */
|
|
#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
|
|
#define BUFNMB 0x007F /* b6-0: Pipe buffer number */
|
|
#define PIPE0BUF 256
|
|
#define PIPExBUF 64
|
|
|
|
/* Pipe Maxpacket Size Register */
|
|
#define MXPS 0x07FF /* b10-0: Maxpacket size */
|
|
|
|
/* Pipe Cycle Configuration Register */
|
|
#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
|
|
#define IITV 0x0007 /* b2-0: Isochronous interval */
|
|
|
|
/* Pipex Control Register */
|
|
#define BSTS 0x8000 /* b15: Buffer status */
|
|
#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
|
|
#define CSCLR 0x2000 /* b13: complete-split status clear */
|
|
#define CSSTS 0x1000 /* b12: complete-split status */
|
|
#define ATREPM 0x0400 /* b10: Auto repeat mode */
|
|
#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
|
|
#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
|
|
#define SQSET 0x0080 /* b7: Sequence toggle bit set */
|
|
#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
|
|
#define PBUSY 0x0020 /* b5: pipe busy */
|
|
#define PID 0x0003 /* b1-0: Response PID */
|
|
|
|
/* PIPExTRE */
|
|
#define TRENB 0x0200 /* b9: Transaction counter enable */
|
|
#define TRCLR 0x0100 /* b8: Transaction counter clear */
|
|
|
|
/* PIPExTRN */
|
|
#define TRNCNT 0xFFFF /* b15-0: Transaction counter */
|
|
|
|
/* DEVADDx */
|
|
#define UPPHUB 0x7800
|
|
#define HUBPORT 0x0700
|
|
#define USBSPD 0x00C0
|
|
#define RTPORT 0x0001
|
|
|
|
#endif /* __LINUX_USB_R8A66597_H */
|
|
|