Mika Westerberg 4544e403eb ahci: Add PCI ID for Cannon Lake PCH-LP AHCI ... This one should be using the default LPM policy for mobile chipsets so add the PCI ID to the driver list of supported revices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org		2018-05-24 07:03:32 -07:00
..
Kconfig	Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-04-03 17:42:25 -07:00
Makefile	Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-04-03 17:42:25 -07:00
acard-ahci.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
ahci.c	ahci: Add PCI ID for Cannon Lake PCH-LP AHCI	2018-05-24 07:03:32 -07:00
ahci.h	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
ahci_brcm.c	ata: ahci_brcm: Recover from failures to identify devices	2018-01-17 07:52:29 -08:00
ahci_ceva.c	ata: ceva: Add SMMU support for SATA IP	2017-10-23 07:09:27 -07:00
ahci_da850.c	sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'	2017-08-16 07:38:27 -07:00
ahci_dm816.c	ata: ahci: add support for DaVinci DM816 SATA controller	2017-03-24 11:40:03 -04:00
ahci_imx.c	ahci: imx: add the imx8qm ahci sata support	2018-03-29 06:43:55 -07:00
ahci_mtk.c	ahci: mtk: Change driver name to ahci-mtk	2017-12-04 12:35:29 -08:00
ahci_mvebu.c	ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI	2018-04-26 11:25:15 -07:00
ahci_octeon.c	Delete redundant return value check of platform_get_resource()	2017-03-06 15:40:59 -05:00
ahci_platform.c	ata: ahci_platform: Add shutdown handler	2017-08-04 13:34:14 -07:00
ahci_qoriq.c	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
ahci_seattle.c	ata: fix return value check in ahci_seattle_get_port_info()	2016-06-15 14:26:41 -04:00
ahci_st.c	ahci: st: Add ports-implemented property in support	2016-08-10 12:16:49 -04:00
ahci_sunxi.c	ata: ahci_platform: fix owner module reference mismatch for scsi host	2015-01-28 18:45:23 -05:00
ahci_tegra.c	ata: ahci_tegra: Add AHCI support for Tegra210	2018-03-14 08:24:21 -07:00
ahci_xgene.c	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
ata_generic.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
ata_piix.c	ata_piix: constify pci_bits	2018-01-08 06:15:41 -08:00
libahci.c	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
libahci_platform.c	Revert "ata: ahci-platform: add reset control support"	2018-04-09 15:10:50 -07:00
libata-acpi.c	ACPI and power management updates for 3.15-rc1	2014-04-01 12:48:54 -07:00
libata-core.c	libata: blacklist Micron 500IT SSD with MU01 firmware	2018-05-21 08:24:20 -07:00
libata-eh.c	driver core: add __printf verification to __ata_ehi_pushv_desc	2018-05-07 08:32:20 -07:00
libata-pmp.c	ata: pmp: add quirk for Marvell 4140 SATA PMP	2015-07-14 17:46:38 -04:00
libata-scsi.c	libata: don't try to pass through NCQ commands to non-NCQ devices	2018-02-12 09:21:25 -08:00
libata-sff.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
libata-trace.c	libata: NCQ encapsulation for ZAC MANAGEMENT OUT	2016-05-09 12:36:46 -04:00
libata-transport.c	libata: add refcounting to ata_host	2018-03-13 13:29:10 -07:00
libata-transport.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
libata-zpodd.c	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
libata.h	libata: add refcounting to ata_host	2018-03-13 13:29:10 -07:00
pata_acpi.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ali.c	ata: Deprecate pci_get_bus_and_slot()	2018-01-11 17:23:23 -06:00
pata_amd.c	cs5536: add support for IDE controller variant	2017-08-11 10:35:07 -07:00
pata_arasan_cf.c	pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()	2018-02-18 05:16:35 -08:00
pata_artop.c	ata: pata_artop: remove redundant initialization of pio	2017-09-18 20:24:21 -07:00
pata_atiixp.c	libata:pata_atiixp: Don't use unconnected secondary port on SB600	2018-01-08 04:02:02 -08:00
pata_atp867x.c	ata: mark expected switch fall-throughs	2017-10-23 07:06:09 -07:00
pata_bk3710.c	pata_bk3710: clarify license version and use SPDX header	2018-03-01 13:59:03 -08:00
pata_cmd64x.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cmd640.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cs5520.c	ata: remove deprecated use of pci api	2015-04-08 10:55:05 -04:00
pata_cs5530.c	ata: Delete unnecessary checks before the function call "pci_dev_put"	2015-02-03 07:04:44 -05:00
pata_cs5535.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cs5536.c	cs5536: add support for IDE controller variant	2017-08-11 10:35:07 -07:00
pata_cypress.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_efar.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ep93xx.c	ata: ep93xx: cut drvdata assignment	2017-05-30 11:54:36 -04:00
pata_falcon.c	pata_falcon: clarify license version and use SPDX header	2018-03-01 13:58:17 -08:00
pata_ftide010.c	ata: ftide010: fix resource printing	2017-06-21 18:06:18 -04:00
pata_gayle.c	ata: add Amiga Gayle PATA controller driver	2018-03-19 07:41:36 -07:00
pata_hpt3x2n.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
pata_hpt3x3.c	ata: remove deprecated use of pci api	2015-04-08 10:55:05 -04:00
pata_hpt37x.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
pata_hpt366.c	ata: hpt366: fix incorrect mask when checking at cmd_high_time	2016-07-12 11:02:05 -04:00
pata_icside.c	scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS	2016-04-15 16:53:14 -04:00
pata_imx.c	pata: imx: support controller modes up to PIO4	2016-11-09 11:48:58 -05:00
pata_isapnp.c	PNP: ata/pata_isapnp: Use module_pnp_driver to register driver	2015-03-18 22:39:17 +01:00
pata_it821x.c	pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()	2018-02-18 05:26:07 -08:00
pata_it8213.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c	ata: pass queued command to ->sff_data_xfer method	2017-01-10 11:11:17 -05:00
pata_jmicron.c	PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI	2015-08-24 15:27:11 -05:00
pata_legacy.c	ata: pass queued command to ->sff_data_xfer method	2017-01-10 11:11:17 -05:00
pata_macio.c	pata_macio: Delete an error message for a failed memory allocation in two functions	2018-02-18 05:24:16 -08:00
pata_marvell.c	ata: Use IS_ENABLED() instead of checking for built-in or module	2016-05-27 11:27:23 -04:00
pata_mpc52xx.c	pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()	2018-02-18 05:23:25 -08:00
pata_mpiix.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_netcell.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ninja32.c	pata_ninja32: Avoid corrupting status flags	2016-08-30 11:59:47 -04:00
pata_ns87410.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ns87415.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_octeon_cf.c	pata_octeon_cf: use of_property_read_{bool|u32}()	2017-08-28 10:44:24 -07:00
pata_of_platform.c	ata: constify of_device_id structures	2017-03-06 15:18:01 -05:00
pata_oldpiix.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_opti.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_optidma.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_palmld.c	ata: drop owner assignment from platform_drivers	2014-10-20 16:20:17 +02:00
pata_pcmcia.c	ata: pass queued command to ->sff_data_xfer method	2017-01-10 11:11:17 -05:00
pata_pdc202xx_old.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_pdc2027x.c	ata: pata_pdc2027x: Replace mdelay with msleep	2018-01-25 07:28:31 -08:00
pata_piccolo.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_platform.c	ata: pata_platform: fix owner module reference mismatch for scsi host	2015-01-28 18:45:23 -05:00
pata_pxa.c	ata: pata_pxa: dmaengine conversion	2015-09-10 17:02:04 -04:00
pata_radisys.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_rb532_cf.c	ata: rb532_cf: cut drvdata assignment	2017-05-30 11:54:37 -04:00
pata_rdc.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
pata_rz1000.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_samsung_cf.c	pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()	2018-02-18 05:20:38 -08:00
pata_sc1200.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_sch.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
pata_serverworks.c	pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller	2014-10-07 17:10:14 -04:00
pata_sil680.c	ata: remove deprecated use of pci api	2015-04-08 10:55:05 -04:00
pata_sis.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_sl82c105.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_triflex.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_via.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pdc_adma.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_dwc_460ex.c	sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()	2018-02-18 05:21:31 -08:00
sata_fsl.c	ata: sata_fsl: cut drvdata assignment	2017-05-30 11:54:37 -04:00
sata_gemini.c	ata: sata_gemini: Introduce explicit IDE pin control	2017-08-11 10:32:09 -07:00
sata_gemini.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
sata_highbank.c	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
sata_inic162x.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
sata_mv.c	ata: sata_mv: Replace mdelay with usleep_range in mv_reset_channel	2018-01-25 07:28:13 -08:00
sata_nv.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_promise.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_promise.h	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_qstor.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_rcar.c	ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()	2018-02-13 06:39:38 -08:00
sata_sil.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_sil24.c	ata: fix spelling mistake: "directon" -> "direction"	2018-05-01 10:39:49 -07:00
sata_sis.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_svw.c	ata: Convert to using %pOF instead of full_name	2017-07-18 18:02:36 -04:00
sata_sx4.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_uli.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_via.c	sata_via: Enable optional hotplug on VT6420	2017-06-26 16:54:53 -04:00
sata_vsc.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sis.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00