WSL2-Linux-Kernel/arch/powerpc/kernel/machine_kexec_64.c

384 строки
9.4 KiB
C

/*
* PPC64 code to handle Linux booting another kernel.
*
* Copyright (C) 2004-2005, IBM Corp.
*
* Created by: Milton D Miller II
*
* This source code is licensed under the GNU General Public License,
* Version 2. See the file COPYING for more details.
*/
#include <linux/kexec.h>
#include <linux/smp.h>
#include <linux/thread_info.h>
#include <linux/errno.h>
#include <asm/page.h>
#include <asm/current.h>
#include <asm/machdep.h>
#include <asm/cacheflush.h>
#include <asm/paca.h>
#include <asm/mmu.h>
#include <asm/sections.h> /* _end */
#include <asm/prom.h>
#include <asm/smp.h>
int default_machine_kexec_prepare(struct kimage *image)
{
int i;
unsigned long begin, end; /* limits of segment */
unsigned long low, high; /* limits of blocked memory range */
struct device_node *node;
const unsigned long *basep;
const unsigned int *sizep;
if (!ppc_md.hpte_clear_all)
return -ENOENT;
/*
* Since we use the kernel fault handlers and paging code to
* handle the virtual mode, we must make sure no destination
* overlaps kernel static data or bss.
*/
for (i = 0; i < image->nr_segments; i++)
if (image->segment[i].mem < __pa(_end))
return -ETXTBSY;
/*
* For non-LPAR, we absolutely can not overwrite the mmu hash
* table, since we are still using the bolted entries in it to
* do the copy. Check that here.
*
* It is safe if the end is below the start of the blocked
* region (end <= low), or if the beginning is after the
* end of the blocked region (begin >= high). Use the
* boolean identity !(a || b) === (!a && !b).
*/
if (htab_address) {
low = __pa(htab_address);
high = low + htab_size_bytes;
for (i = 0; i < image->nr_segments; i++) {
begin = image->segment[i].mem;
end = begin + image->segment[i].memsz;
if ((begin < high) && (end > low))
return -ETXTBSY;
}
}
/* We also should not overwrite the tce tables */
for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
node = of_find_node_by_type(node, "pci")) {
basep = of_get_property(node, "linux,tce-base", NULL);
sizep = of_get_property(node, "linux,tce-size", NULL);
if (basep == NULL || sizep == NULL)
continue;
low = *basep;
high = low + (*sizep);
for (i = 0; i < image->nr_segments; i++) {
begin = image->segment[i].mem;
end = begin + image->segment[i].memsz;
if ((begin < high) && (end > low))
return -ETXTBSY;
}
}
return 0;
}
#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE)
static void copy_segments(unsigned long ind)
{
unsigned long entry;
unsigned long *ptr;
void *dest;
void *addr;
/*
* We rely on kexec_load to create a lists that properly
* initializes these pointers before they are used.
* We will still crash if the list is wrong, but at least
* the compiler will be quiet.
*/
ptr = NULL;
dest = NULL;
for (entry = ind; !(entry & IND_DONE); entry = *ptr++) {
addr = __va(entry & PAGE_MASK);
switch (entry & IND_FLAGS) {
case IND_DESTINATION:
dest = addr;
break;
case IND_INDIRECTION:
ptr = addr;
break;
case IND_SOURCE:
copy_page(dest, addr);
dest += PAGE_SIZE;
}
}
}
void kexec_copy_flush(struct kimage *image)
{
long i, nr_segments = image->nr_segments;
struct kexec_segment ranges[KEXEC_SEGMENT_MAX];
/* save the ranges on the stack to efficiently flush the icache */
memcpy(ranges, image->segment, sizeof(ranges));
/*
* After this call we may not use anything allocated in dynamic
* memory, including *image.
*
* Only globals and the stack are allowed.
*/
copy_segments(image->head);
/*
* we need to clear the icache for all dest pages sometime,
* including ones that were in place on the original copy
*/
for (i = 0; i < nr_segments; i++)
flush_icache_range((unsigned long)__va(ranges[i].mem),
(unsigned long)__va(ranges[i].mem + ranges[i].memsz));
}
#ifdef CONFIG_SMP
/* FIXME: we should schedule this function to be called on all cpus based
* on calling the interrupts, but we would like to call it off irq level
* so that the interrupt controller is clean.
*/
static void kexec_smp_down(void *arg)
{
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 1);
local_irq_disable();
kexec_smp_wait();
/* NOTREACHED */
}
static void kexec_prepare_cpus(void)
{
int my_cpu, i, notified=-1;
smp_call_function(kexec_smp_down, NULL, /* wait */0);
my_cpu = get_cpu();
/* check the others cpus are now down (via paca hw cpu id == -1) */
for (i=0; i < NR_CPUS; i++) {
if (i == my_cpu)
continue;
while (paca[i].hw_cpu_id != -1) {
barrier();
if (!cpu_possible(i)) {
printk("kexec: cpu %d hw_cpu_id %d is not"
" possible, ignoring\n",
i, paca[i].hw_cpu_id);
break;
}
if (!cpu_online(i)) {
/* Fixme: this can be spinning in
* pSeries_secondary_wait with a paca
* waiting for it to go online.
*/
printk("kexec: cpu %d hw_cpu_id %d is not"
" online, ignoring\n",
i, paca[i].hw_cpu_id);
break;
}
if (i != notified) {
printk( "kexec: waiting for cpu %d (physical"
" %d) to go down\n",
i, paca[i].hw_cpu_id);
notified = i;
}
}
}
/* after we tell the others to go down */
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 0);
put_cpu();
local_irq_disable();
}
#else /* ! SMP */
static void kexec_prepare_cpus(void)
{
/*
* move the secondarys to us so that we can copy
* the new kernel 0-0x100 safely
*
* do this if kexec in setup.c ?
*
* We need to release the cpus if we are ever going from an
* UP to an SMP kernel.
*/
smp_release_cpus();
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 0);
local_irq_disable();
}
#endif /* SMP */
/*
* kexec thread structure and stack.
*
* We need to make sure that this is 16384-byte aligned due to the
* way process stacks are handled. It also must be statically allocated
* or allocated as part of the kimage, because everything else may be
* overwritten when we copy the kexec image. We piggyback on the
* "init_task" linker section here to statically allocate a stack.
*
* We could use a smaller stack if we don't care about anything using
* current, but that audit has not been performed.
*/
static union thread_union kexec_stack
__attribute__((__section__(".data.init_task"))) = { };
/* Our assembly helper, in kexec_stub.S */
extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
void *image, void *control,
void (*clear_all)(void)) ATTRIB_NORET;
/* too late to fail here */
void default_machine_kexec(struct kimage *image)
{
/* prepare control code if any */
/*
* If the kexec boot is the normal one, need to shutdown other cpus
* into our wait loop and quiesce interrupts.
* Otherwise, in the case of crashed mode (crashing_cpu >= 0),
* stopping other CPUs and collecting their pt_regs is done before
* using debugger IPI.
*/
if (crashing_cpu == -1)
kexec_prepare_cpus();
/* switch to a staticly allocated stack. Based on irq stack code.
* XXX: the task struct will likely be invalid once we do the copy!
*/
kexec_stack.thread_info.task = current_thread_info()->task;
kexec_stack.thread_info.flags = 0;
/* Some things are best done in assembly. Finding globals with
* a toc is easier in C, so pass in what we can.
*/
kexec_sequence(&kexec_stack, image->start, image,
page_address(image->control_code_page),
ppc_md.hpte_clear_all);
/* NOTREACHED */
}
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base, kernel_end;
static struct property htab_base_prop = {
.name = "linux,htab-base",
.length = sizeof(unsigned long),
.value = &htab_base,
};
static struct property htab_size_prop = {
.name = "linux,htab-size",
.length = sizeof(unsigned long),
.value = &htab_size_bytes,
};
static struct property kernel_end_prop = {
.name = "linux,kernel-end",
.length = sizeof(unsigned long),
.value = &kernel_end,
};
static void __init export_htab_values(void)
{
struct device_node *node;
node = of_find_node_by_path("/chosen");
if (!node)
return;
kernel_end = __pa(_end);
prom_add_property(node, &kernel_end_prop);
/* On machines with no htab htab_address is NULL */
if (NULL == htab_address)
goto out;
htab_base = __pa(htab_address);
prom_add_property(node, &htab_base_prop);
prom_add_property(node, &htab_size_prop);
out:
of_node_put(node);
}
static struct property crashk_base_prop = {
.name = "linux,crashkernel-base",
.length = sizeof(unsigned long),
.value = &crashk_res.start,
};
static unsigned long crashk_size;
static struct property crashk_size_prop = {
.name = "linux,crashkernel-size",
.length = sizeof(unsigned long),
.value = &crashk_size,
};
static void __init export_crashk_values(void)
{
struct device_node *node;
struct property *prop;
node = of_find_node_by_path("/chosen");
if (!node)
return;
/* There might be existing crash kernel properties, but we can't
* be sure what's in them, so remove them. */
prop = of_find_property(node, "linux,crashkernel-base", NULL);
if (prop)
prom_remove_property(node, prop);
prop = of_find_property(node, "linux,crashkernel-size", NULL);
if (prop)
prom_remove_property(node, prop);
if (crashk_res.start != 0) {
prom_add_property(node, &crashk_base_prop);
crashk_size = crashk_res.end - crashk_res.start + 1;
prom_add_property(node, &crashk_size_prop);
}
of_node_put(node);
}
static int __init kexec_setup(void)
{
export_htab_values();
export_crashk_values();
return 0;
}
__initcall(kexec_setup);