344 строки
8.9 KiB
C
344 строки
8.9 KiB
C
/*
|
|
* pata_oldpiix.c - Intel PATA/SATA controllers
|
|
*
|
|
* (C) 2005 Red Hat <alan@redhat.com>
|
|
*
|
|
* Some parts based on ata_piix.c by Jeff Garzik and others.
|
|
*
|
|
* Early PIIX differs significantly from the later PIIX as it lacks
|
|
* SITRE and the slave timing registers. This means that you have to
|
|
* set timing per channel, or be clever. Libata tells us whenever it
|
|
* does drive selection and we use this to reload the timings.
|
|
*
|
|
* Because of these behaviour differences PIIX gets its own driver module.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/ata.h>
|
|
|
|
#define DRV_NAME "pata_oldpiix"
|
|
#define DRV_VERSION "0.5.5"
|
|
|
|
/**
|
|
* oldpiix_pre_reset - probe begin
|
|
* @ap: ATA port
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Set up cable type and use generic probe init
|
|
*/
|
|
|
|
static int oldpiix_pre_reset(struct ata_port *ap, unsigned long deadline)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static const struct pci_bits oldpiix_enable_bits[] = {
|
|
{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
|
|
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
|
|
};
|
|
|
|
if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
|
|
return -ENOENT;
|
|
|
|
return ata_std_prereset(ap, deadline);
|
|
}
|
|
|
|
/**
|
|
* oldpiix_pata_error_handler - Probe specified port on PATA host controller
|
|
* @ap: Port to probe
|
|
* @classes:
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void oldpiix_pata_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* oldpiix_set_piomode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: Device whose timings we are configuring
|
|
*
|
|
* Set PIO mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
|
|
u16 idetm_data;
|
|
int control = 0;
|
|
|
|
/*
|
|
* See Intel Document 298600-004 for the timing programing rules
|
|
* for PIIX/ICH. Note that the early PIIX does not have the slave
|
|
* timing port at 0x44.
|
|
*/
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
if (pio > 1)
|
|
control |= 1; /* TIME */
|
|
if (ata_pio_need_iordy(adev))
|
|
control |= 2; /* IE */
|
|
|
|
/* Intel specifies that the prefetch/posting is for disk only */
|
|
if (adev->class == ATA_DEV_ATA)
|
|
control |= 4; /* PPE */
|
|
|
|
pci_read_config_word(dev, idetm_port, &idetm_data);
|
|
|
|
/*
|
|
* Set PPE, IE and TIME as appropriate.
|
|
* Clear the other drive's timing bits.
|
|
*/
|
|
if (adev->devno == 0) {
|
|
idetm_data &= 0xCCE0;
|
|
idetm_data |= control;
|
|
} else {
|
|
idetm_data &= 0xCC0E;
|
|
idetm_data |= (control << 4);
|
|
}
|
|
idetm_data |= (timings[pio][0] << 12) |
|
|
(timings[pio][1] << 8);
|
|
pci_write_config_word(dev, idetm_port, idetm_data);
|
|
|
|
/* Track which port is configured */
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* oldpiix_set_dmamode - Initialize host controller PATA DMA timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: Device to program
|
|
* @isich: True if the device is an ICH and has IOCFG registers
|
|
*
|
|
* Set MWDMA mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
u8 idetm_port = ap->port_no ? 0x42 : 0x40;
|
|
u16 idetm_data;
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
/*
|
|
* MWDMA is driven by the PIO timings. We must also enable
|
|
* IORDY unconditionally along with TIME1. PPE has already
|
|
* been set when the PIO timing was set.
|
|
*/
|
|
|
|
unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
|
|
unsigned int control;
|
|
const unsigned int needed_pio[3] = {
|
|
XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
|
|
};
|
|
int pio = needed_pio[mwdma] - XFER_PIO_0;
|
|
|
|
pci_read_config_word(dev, idetm_port, &idetm_data);
|
|
|
|
control = 3; /* IORDY|TIME0 */
|
|
/* Intel specifies that the PPE functionality is for disk only */
|
|
if (adev->class == ATA_DEV_ATA)
|
|
control |= 4; /* PPE enable */
|
|
|
|
/* If the drive MWDMA is faster than it can do PIO then
|
|
we must force PIO into PIO0 */
|
|
|
|
if (adev->pio_mode < needed_pio[mwdma])
|
|
/* Enable DMA timing only */
|
|
control |= 8; /* PIO cycles in PIO0 */
|
|
|
|
/* Mask out the relevant control and timing bits we will load. Also
|
|
clear the other drive TIME register as a precaution */
|
|
if (adev->devno == 0) {
|
|
idetm_data &= 0xCCE0;
|
|
idetm_data |= control;
|
|
} else {
|
|
idetm_data &= 0xCC0E;
|
|
idetm_data |= (control << 4);
|
|
}
|
|
idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
pci_write_config_word(dev, idetm_port, idetm_data);
|
|
|
|
/* Track which port is configured */
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* oldpiix_qc_issue_prot - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* neccessary. Our logic also clears TIME0/TIME1 for the other device so
|
|
* that, even if we get this wrong, cycles to the other device will
|
|
* be made PIO0.
|
|
*/
|
|
|
|
static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
if (adev != ap->private_data) {
|
|
oldpiix_set_piomode(ap, adev);
|
|
if (adev->dma_mode)
|
|
oldpiix_set_dmamode(ap, adev);
|
|
}
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
|
|
static struct scsi_host_template oldpiix_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations oldpiix_pata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = oldpiix_set_piomode,
|
|
.set_dmamode = oldpiix_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = oldpiix_pata_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = oldpiix_qc_issue_prot,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
|
|
/**
|
|
* oldpiix_init_one - Register PIIX ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in oldpiix_pci_tbl matching with @pdev
|
|
*
|
|
* Called from kernel PCI layer. We probe for combined mode (sigh),
|
|
* and then hand over control to libata, for it to do the rest.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
static const struct ata_port_info info = {
|
|
.sht = &oldpiix_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma1-2 */
|
|
.port_ops = &oldpiix_pata_ops,
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"version " DRV_VERSION "\n");
|
|
|
|
return ata_pci_init_one(pdev, ppi);
|
|
}
|
|
|
|
static const struct pci_device_id oldpiix_pci_tbl[] = {
|
|
{ PCI_VDEVICE(INTEL, 0x1230), },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver oldpiix_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = oldpiix_pci_tbl,
|
|
.probe = oldpiix_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init oldpiix_init(void)
|
|
{
|
|
return pci_register_driver(&oldpiix_pci_driver);
|
|
}
|
|
|
|
static void __exit oldpiix_exit(void)
|
|
{
|
|
pci_unregister_driver(&oldpiix_pci_driver);
|
|
}
|
|
|
|
module_init(oldpiix_init);
|
|
module_exit(oldpiix_exit);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|