390 строки
11 KiB
C
390 строки
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved.
|
|
*/
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define DRIVER_NAME "ltc3676"
|
|
|
|
/* LTC3676 Registers */
|
|
#define LTC3676_BUCK1 0x01
|
|
#define LTC3676_BUCK2 0x02
|
|
#define LTC3676_BUCK3 0x03
|
|
#define LTC3676_BUCK4 0x04
|
|
#define LTC3676_LDOA 0x05
|
|
#define LTC3676_LDOB 0x06
|
|
#define LTC3676_SQD1 0x07
|
|
#define LTC3676_SQD2 0x08
|
|
#define LTC3676_CNTRL 0x09
|
|
#define LTC3676_DVB1A 0x0A
|
|
#define LTC3676_DVB1B 0x0B
|
|
#define LTC3676_DVB2A 0x0C
|
|
#define LTC3676_DVB2B 0x0D
|
|
#define LTC3676_DVB3A 0x0E
|
|
#define LTC3676_DVB3B 0x0F
|
|
#define LTC3676_DVB4A 0x10
|
|
#define LTC3676_DVB4B 0x11
|
|
#define LTC3676_MSKIRQ 0x12
|
|
#define LTC3676_MSKPG 0x13
|
|
#define LTC3676_USER 0x14
|
|
#define LTC3676_IRQSTAT 0x15
|
|
#define LTC3676_PGSTATL 0x16
|
|
#define LTC3676_PGSTATRT 0x17
|
|
#define LTC3676_HRST 0x1E
|
|
#define LTC3676_CLIRQ 0x1F
|
|
|
|
#define LTC3676_DVBxA_REF_SELECT BIT(5)
|
|
#define LTC3676_DVBxB_PGOOD_MASK BIT(5)
|
|
|
|
#define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(3)
|
|
#define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(4)
|
|
#define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(5)
|
|
#define LTC3676_IRQSTAT_THERMAL_WARN BIT(6)
|
|
#define LTC3676_IRQSTAT_THERMAL_FAULT BIT(7)
|
|
|
|
enum ltc3676_reg {
|
|
LTC3676_SW1,
|
|
LTC3676_SW2,
|
|
LTC3676_SW3,
|
|
LTC3676_SW4,
|
|
LTC3676_LDO1,
|
|
LTC3676_LDO2,
|
|
LTC3676_LDO3,
|
|
LTC3676_LDO4,
|
|
LTC3676_NUM_REGULATORS,
|
|
};
|
|
|
|
struct ltc3676 {
|
|
struct regmap *regmap;
|
|
struct device *dev;
|
|
struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS];
|
|
struct regulator_dev *regulators[LTC3676_NUM_REGULATORS];
|
|
};
|
|
|
|
static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
|
{
|
|
struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev);
|
|
struct device *dev = ltc3676->dev;
|
|
int dcdc = rdev_get_id(rdev);
|
|
int sel;
|
|
|
|
dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV);
|
|
sel = regulator_map_voltage_linear(rdev, uV, uV);
|
|
if (sel < 0)
|
|
return sel;
|
|
|
|
/* DVBB register follows right after the corresponding DVBA register */
|
|
return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1,
|
|
rdev->desc->vsel_mask, sel);
|
|
}
|
|
|
|
static int ltc3676_set_suspend_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
struct ltc3676 *ltc3676= rdev_get_drvdata(rdev);
|
|
struct device *dev = ltc3676->dev;
|
|
int mask, val;
|
|
int dcdc = rdev_get_id(rdev);
|
|
|
|
dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode);
|
|
|
|
mask = LTC3676_DVBxA_REF_SELECT;
|
|
switch (mode) {
|
|
case REGULATOR_MODE_STANDBY:
|
|
val = 0; /* select DVBxA */
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */
|
|
break;
|
|
default:
|
|
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
|
|
rdev->desc->name, mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg,
|
|
mask, val);
|
|
}
|
|
|
|
static int ltc3676_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
|
|
{
|
|
struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev);
|
|
struct device *dev = ltc3676->dev;
|
|
int ret, dcdc = rdev_get_id(rdev);
|
|
|
|
dev_dbg(dev, "%s id=%d selector=%d\n", __func__, dcdc, selector);
|
|
|
|
ret = regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1,
|
|
LTC3676_DVBxB_PGOOD_MASK,
|
|
LTC3676_DVBxB_PGOOD_MASK);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regulator_set_voltage_sel_regmap(rdev, selector);
|
|
}
|
|
|
|
static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2)
|
|
{
|
|
uint64_t tmp;
|
|
if (uV == 0)
|
|
return 0;
|
|
tmp = (uint64_t)uV * r1;
|
|
do_div(tmp, r2);
|
|
return uV + (unsigned int)tmp;
|
|
}
|
|
|
|
static int ltc3676_of_parse_cb(struct device_node *np,
|
|
const struct regulator_desc *desc,
|
|
struct regulator_config *config)
|
|
{
|
|
struct ltc3676 *ltc3676 = config->driver_data;
|
|
struct regulator_desc *rdesc = <c3676->regulator_descs[desc->id];
|
|
u32 r[2];
|
|
int ret;
|
|
|
|
/* LDO3 has a fixed output */
|
|
if (desc->id == LTC3676_LDO3)
|
|
return 0;
|
|
|
|
ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2);
|
|
if (ret) {
|
|
dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]);
|
|
rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]);
|
|
rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */
|
|
static const struct regulator_ops ltc3676_linear_regulator_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_voltage_sel = ltc3676_set_voltage_sel,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_suspend_voltage = ltc3676_set_suspend_voltage,
|
|
.set_suspend_mode = ltc3676_set_suspend_mode,
|
|
};
|
|
|
|
/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
|
|
static const struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
|
|
};
|
|
|
|
/* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
|
|
static const struct regulator_ops ltc3676_fixed_regulator_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
#define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask) \
|
|
[LTC3676_ ## _id] = { \
|
|
.name = #_name, \
|
|
.of_match = of_match_ptr(#_name), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.of_parse_cb = ltc3676_of_parse_cb, \
|
|
.n_voltages = (dvb_mask) + 1, \
|
|
.min_uV = (dvba_reg) ? 412500 : 0, \
|
|
.uV_step = (dvba_reg) ? 12500 : 0, \
|
|
.ramp_delay = (dvba_reg) ? 800 : 0, \
|
|
.fixed_uV = (dvb_mask) ? 0 : 725000, \
|
|
.ops = <c3676_ ## _ops ## _regulator_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = LTC3676_ ## _id, \
|
|
.owner = THIS_MODULE, \
|
|
.vsel_reg = (dvba_reg), \
|
|
.vsel_mask = (dvb_mask), \
|
|
.enable_reg = (en_reg), \
|
|
.enable_mask = (1 << en_bit), \
|
|
}
|
|
|
|
#define LTC3676_LINEAR_REG(_id, _name, _en, _dvba) \
|
|
LTC3676_REG(_id, _name, linear, \
|
|
LTC3676_ ## _en, 7, \
|
|
LTC3676_ ## _dvba, 0x1f)
|
|
|
|
#define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit) \
|
|
LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0)
|
|
|
|
static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
|
|
LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A),
|
|
LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A),
|
|
LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A),
|
|
LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A),
|
|
LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
|
|
LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2),
|
|
LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
|
|
LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
|
|
};
|
|
|
|
static bool ltc3676_readable_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case LTC3676_BUCK1 ... LTC3676_IRQSTAT:
|
|
case LTC3676_HRST:
|
|
case LTC3676_CLIRQ:
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case LTC3676_IRQSTAT ... LTC3676_PGSTATRT:
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static const struct regmap_config ltc3676_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = ltc3676_readable_writeable_reg,
|
|
.readable_reg = ltc3676_readable_writeable_reg,
|
|
.volatile_reg = ltc3676_volatile_reg,
|
|
.max_register = LTC3676_CLIRQ,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static irqreturn_t ltc3676_isr(int irq, void *dev_id)
|
|
{
|
|
struct ltc3676 *ltc3676 = dev_id;
|
|
struct device *dev = ltc3676->dev;
|
|
unsigned int i, irqstat, event;
|
|
|
|
regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat);
|
|
|
|
dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat);
|
|
if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) {
|
|
dev_warn(dev, "Over-temperature Warning\n");
|
|
event = REGULATOR_EVENT_OVER_TEMP;
|
|
for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
|
|
regulator_lock(ltc3676->regulators[i]);
|
|
regulator_notifier_call_chain(ltc3676->regulators[i],
|
|
event, NULL);
|
|
regulator_unlock(ltc3676->regulators[i]);
|
|
}
|
|
}
|
|
|
|
if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) {
|
|
dev_info(dev, "Undervoltage Warning\n");
|
|
event = REGULATOR_EVENT_UNDER_VOLTAGE;
|
|
for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
|
|
regulator_lock(ltc3676->regulators[i]);
|
|
regulator_notifier_call_chain(ltc3676->regulators[i],
|
|
event, NULL);
|
|
regulator_unlock(ltc3676->regulators[i]);
|
|
}
|
|
}
|
|
|
|
/* Clear warning condition */
|
|
regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ltc3676_regulator_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct regulator_init_data *init_data = dev_get_platdata(dev);
|
|
struct regulator_desc *descs;
|
|
struct ltc3676 *ltc3676;
|
|
int i, ret;
|
|
|
|
ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL);
|
|
if (!ltc3676)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, ltc3676);
|
|
ltc3676->dev = dev;
|
|
|
|
descs = ltc3676->regulator_descs;
|
|
memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators));
|
|
descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */
|
|
|
|
ltc3676->regmap = devm_regmap_init_i2c(client, <c3676_regmap_config);
|
|
if (IS_ERR(ltc3676->regmap)) {
|
|
ret = PTR_ERR(ltc3676->regmap);
|
|
dev_err(dev, "failed to initialize regmap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
|
|
struct regulator_desc *desc = <c3676->regulator_descs[i];
|
|
struct regulator_config config = { };
|
|
|
|
if (init_data)
|
|
config.init_data = &init_data[i];
|
|
|
|
config.dev = dev;
|
|
config.driver_data = ltc3676;
|
|
|
|
ltc3676->regulators[i] = devm_regulator_register(dev, desc,
|
|
&config);
|
|
if (IS_ERR(ltc3676->regulators[i])) {
|
|
ret = PTR_ERR(ltc3676->regulators[i]);
|
|
dev_err(dev, "failed to register regulator %s: %d\n",
|
|
desc->name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
|
|
if (client->irq) {
|
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
ltc3676_isr,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
client->name, ltc3676);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request IRQ: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ltc3676_i2c_id[] = {
|
|
{ "ltc3676" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id);
|
|
|
|
static const struct of_device_id ltc3676_of_match[] = {
|
|
{ .compatible = "lltc,ltc3676" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ltc3676_of_match);
|
|
|
|
static struct i2c_driver ltc3676_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = of_match_ptr(ltc3676_of_match),
|
|
},
|
|
.probe_new = ltc3676_regulator_probe,
|
|
.id_table = ltc3676_i2c_id,
|
|
};
|
|
module_i2c_driver(ltc3676_driver);
|
|
|
|
MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
|
|
MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC3676");
|
|
MODULE_LICENSE("GPL v2");
|