Thomas Huehn 3a245cbef6 ath5k: fix wrong max power per rate eeprom reads for 802.11a ... This patch reduces the per rate target power eeprom reads for AR5K_EEPROM_MODE_11A from 10 to 8, as there are only 8 valid power curve entries on the eeprom. The former 10 reads lead to equal max power limits per rate and this causes an increasing distortion for all rates above 24 MBit and leads to a needless poor performance in 802.11a mode. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2012-08-21 14:58:20 -04:00
..
Kconfig	ath5k: replace modparam_all_channels with CONFIG_ATH5K_TEST_CHANNELS	2012-07-11 15:40:23 -04:00
Makefile	…
ahb.c	ath5k: add missing iounmap to AHB probe removal	2012-04-27 15:24:07 -04:00
ani.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
ani.h	ath5k: Cleanups v2 + add kerneldoc on all hw functions	2011-11-28 14:44:16 -05:00
ath5k.h	mac80211: remove hw.conf.channel usage where possible	2012-04-13 14:32:50 -04:00
attach.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
base.c	ath5k: fix spin_lock_irqsave/spin_lock_bh nesting in mesh	2012-08-13 15:17:25 -04:00
base.h	ath5k: remove last references to "softc"	2011-08-08 16:04:14 -04:00
caps.c	ath5k: MRR support and 2GHz radio override belong in ah_capabilities	2011-11-28 14:44:19 -05:00
debug.c	Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless	2012-04-12 13:49:28 -04:00
debug.h	treewide: use __printf not __attribute__((format(printf,...)))	2011-10-31 17:30:54 -07:00
desc.c	ath5k: Remove extraneous statements from ath5k_hw_proc_4word_tx_status and ath5k_hw_proc_2word_status.	2012-04-11 16:23:58 -04:00
desc.h	ath5k: Cleanups v2 + add kerneldoc on all hw functions	2011-11-28 14:44:16 -05:00
dma.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
eeprom.c	ath5k: fix wrong max power per rate eeprom reads for 802.11a	2012-08-21 14:58:20 -04:00
eeprom.h	ath5k: fix wrong max power per rate eeprom reads for 802.11a	2012-08-21 14:58:20 -04:00
gpio.c	ath5k: Cleanups v2 + add kerneldoc on all hw functions	2011-11-28 14:44:16 -05:00
initvals.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
led.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
mac80211-ops.c	ath5k: fix spin_lock_irqsave/spin_lock_bh nesting in mesh	2012-08-13 15:17:25 -04:00
pci.c	net/wireless: use module_pci_driver	2012-04-16 14:38:50 -04:00
pcu.c	mac80211: remove hw.conf.channel usage where possible	2012-04-13 14:32:50 -04:00
phy.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
qcu.c	mac80211: remove hw.conf.channel usage where possible	2012-04-13 14:32:50 -04:00
reg.h	ath5k: Switch from read-and-clear to write-to-clear method when handling PISR/SISR registers	2011-11-28 14:44:10 -05:00
reset.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
rfbuffer.h	ath5k: Cleanups v2 + add kerneldoc on all hw functions	2011-11-28 14:44:16 -05:00
rfgain.h	ath5k: Cleanups v2 + add kerneldoc on all hw functions	2011-11-28 14:44:16 -05:00
rfkill.c	ath5k: clean up base.h and its use	2011-08-08 16:04:14 -04:00
sysfs.c	ath: Add and use pr_fmt, convert printks to pr_<level>	2012-04-10 14:52:13 -04:00
trace.h	ath5k: avoid sparse warnings on tracing	2012-01-04 14:30:40 -05:00