WSL2-Linux-Kernel/drivers/scsi/aacraid
Penchala Narasimha Reddy Chilakala, ERS-HCLTech cacb6dc3d7 [SCSI] aacraid: fix File System going into read-only mode
These particular problems were reported by Cisco and SAP and customers
as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and
SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build
to IBM and Cisco. Cisco and IBM tested it for more than 15 days and
they reported that they did not see the issue so far. Before the fix,
Cisco used to see the issue within 5 days. We generated a patch for
SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the
patch and gave a test build to SAP. SAP tested and reported that the
build is working properly.

We also tested in our lab using the tools "dishogsync", which is IO
stress tool and the tool was provided by Cisco.

Issue1:  File System going into read-only mode

Root cause: The driver tends to not free the memory (FIB) when the
management request exits prematurely. The accumulation of such
un-freed memory causes the driver to fail to allocate anymore memory
(FIB) and hence return 0x70000 value to the upper layer, which puts
the file system into read only mode.

Fix details: The fix makes sure to free the memory (FIB) even if the
request exits prematurely hence ensuring the driver wouldn't run out
of memory (FIBs).


Issue2: False Raid Alert occurs

When the Physical Drives and Logical drives are reported as deleted or
added, even though there is no change done on the system

Root cause: Driver IOCTLs is signaled with EINTR while waiting on
response from the lower layers. Returning "EINTR" will never initiate
internal retry.

Fix details: The issue was fixed by replacing "EINTR" with
"ERESTARTSYS" for mid-layer retries.

Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:16:17 -06:00
..
Makefile [SCSI] aacraid: Begin adding support for new adapter type 2007-01-27 09:27:31 -06:00
TODO [SCSI] aacraid: Newer adapter communication iterface support 2005-10-28 11:41:53 -05:00
aachba.c [SCSI] aacraid: fix File System going into read-only mode 2010-01-17 12:16:17 -06:00
aacraid.h [SCSI] aacraid: fix File System going into read-only mode 2010-01-17 12:16:17 -06:00
commctrl.c [SCSI] aacraid: fix File System going into read-only mode 2010-01-17 12:16:17 -06:00
comminit.c [SCSI] aacraid: fix File System going into read-only mode 2010-01-17 12:16:17 -06:00
commsup.c [SCSI] aacraid: fix File System going into read-only mode 2010-01-17 12:16:17 -06:00
dpcsup.c [SCSI] aacraid: fix File System going into read-only mode 2010-01-17 12:16:17 -06:00
linit.c [SCSI] modify change_queue_depth to take in reason why it is being called 2009-12-04 12:00:41 -06:00
nark.c [SCSI] aacraid: draw line in sand, sundry cleanup and version update 2007-07-27 09:13:28 -04:00
rkt.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
rx.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
sa.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00