1479 строки
46 KiB
C
1479 строки
46 KiB
C
/*
|
|
* Core definitions and data structures shareable across OS platforms.
|
|
*
|
|
* Copyright (c) 1994-2002 Justin T. Gibbs.
|
|
* Copyright (c) 2000-2002 Adaptec Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*
|
|
* $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#109 $
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _AIC79XX_H_
|
|
#define _AIC79XX_H_
|
|
|
|
/* Register Definitions */
|
|
#include "aic79xx_reg.h"
|
|
|
|
/************************* Forward Declarations *******************************/
|
|
struct ahd_platform_data;
|
|
struct scb_platform_data;
|
|
|
|
/****************************** Useful Macros *********************************/
|
|
#ifndef TRUE
|
|
#define TRUE 1
|
|
#endif
|
|
#ifndef FALSE
|
|
#define FALSE 0
|
|
#endif
|
|
|
|
#define ALL_CHANNELS '\0'
|
|
#define ALL_TARGETS_MASK 0xFFFF
|
|
#define INITIATOR_WILDCARD (~0)
|
|
#define SCB_LIST_NULL 0xFF00
|
|
#define SCB_LIST_NULL_LE (ahd_htole16(SCB_LIST_NULL))
|
|
#define QOUTFIFO_ENTRY_VALID 0x80
|
|
#define SCBID_IS_NULL(scbid) (((scbid) & 0xFF00 ) == SCB_LIST_NULL)
|
|
|
|
#define SCSIID_TARGET(ahd, scsiid) \
|
|
(((scsiid) & TID) >> TID_SHIFT)
|
|
#define SCSIID_OUR_ID(scsiid) \
|
|
((scsiid) & OID)
|
|
#define SCSIID_CHANNEL(ahd, scsiid) ('A')
|
|
#define SCB_IS_SCSIBUS_B(ahd, scb) (0)
|
|
#define SCB_GET_OUR_ID(scb) \
|
|
SCSIID_OUR_ID((scb)->hscb->scsiid)
|
|
#define SCB_GET_TARGET(ahd, scb) \
|
|
SCSIID_TARGET((ahd), (scb)->hscb->scsiid)
|
|
#define SCB_GET_CHANNEL(ahd, scb) \
|
|
SCSIID_CHANNEL(ahd, (scb)->hscb->scsiid)
|
|
#define SCB_GET_LUN(scb) \
|
|
((scb)->hscb->lun)
|
|
#define SCB_GET_TARGET_OFFSET(ahd, scb) \
|
|
SCB_GET_TARGET(ahd, scb)
|
|
#define SCB_GET_TARGET_MASK(ahd, scb) \
|
|
(0x01 << (SCB_GET_TARGET_OFFSET(ahd, scb)))
|
|
#ifdef AHD_DEBUG
|
|
#define SCB_IS_SILENT(scb) \
|
|
((ahd_debug & AHD_SHOW_MASKED_ERRORS) == 0 \
|
|
&& (((scb)->flags & SCB_SILENT) != 0))
|
|
#else
|
|
#define SCB_IS_SILENT(scb) \
|
|
(((scb)->flags & SCB_SILENT) != 0)
|
|
#endif
|
|
/*
|
|
* TCLs have the following format: TTTTLLLLLLLL
|
|
*/
|
|
#define TCL_TARGET_OFFSET(tcl) \
|
|
((((tcl) >> 4) & TID) >> 4)
|
|
#define TCL_LUN(tcl) \
|
|
(tcl & (AHD_NUM_LUNS - 1))
|
|
#define BUILD_TCL(scsiid, lun) \
|
|
((lun) | (((scsiid) & TID) << 4))
|
|
#define BUILD_TCL_RAW(target, channel, lun) \
|
|
((lun) | ((target) << 8))
|
|
|
|
#define SCB_GET_TAG(scb) \
|
|
ahd_le16toh(scb->hscb->tag)
|
|
|
|
#ifndef AHD_TARGET_MODE
|
|
#undef AHD_TMODE_ENABLE
|
|
#define AHD_TMODE_ENABLE 0
|
|
#endif
|
|
|
|
#define AHD_BUILD_COL_IDX(target, lun) \
|
|
((((u8)lun) << 4) | target)
|
|
|
|
#define AHD_GET_SCB_COL_IDX(ahd, scb) \
|
|
((SCB_GET_LUN(scb) << 4) | SCB_GET_TARGET(ahd, scb))
|
|
|
|
#define AHD_SET_SCB_COL_IDX(scb, col_idx) \
|
|
do { \
|
|
(scb)->hscb->scsiid = ((col_idx) << TID_SHIFT) & TID; \
|
|
(scb)->hscb->lun = ((col_idx) >> 4) & (AHD_NUM_LUNS_NONPKT-1); \
|
|
} while (0)
|
|
|
|
#define AHD_COPY_SCB_COL_IDX(dst, src) \
|
|
do { \
|
|
dst->hscb->scsiid = src->hscb->scsiid; \
|
|
dst->hscb->lun = src->hscb->lun; \
|
|
} while (0)
|
|
|
|
#define AHD_NEVER_COL_IDX 0xFFFF
|
|
|
|
/**************************** Driver Constants ********************************/
|
|
/*
|
|
* The maximum number of supported targets.
|
|
*/
|
|
#define AHD_NUM_TARGETS 16
|
|
|
|
/*
|
|
* The maximum number of supported luns.
|
|
* The identify message only supports 64 luns in non-packetized transfers.
|
|
* You can have 2^64 luns when information unit transfers are enabled,
|
|
* but until we see a need to support that many, we support 256.
|
|
*/
|
|
#define AHD_NUM_LUNS_NONPKT 64
|
|
#define AHD_NUM_LUNS 256
|
|
|
|
/*
|
|
* The maximum transfer per S/G segment.
|
|
*/
|
|
#define AHD_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */
|
|
|
|
/*
|
|
* The maximum amount of SCB storage in hardware on a controller.
|
|
* This value represents an upper bound. Due to software design,
|
|
* we may not be able to use this number.
|
|
*/
|
|
#define AHD_SCB_MAX 512
|
|
|
|
/*
|
|
* The maximum number of concurrent transactions supported per driver instance.
|
|
* Sequencer Control Blocks (SCBs) store per-transaction information.
|
|
*/
|
|
#define AHD_MAX_QUEUE AHD_SCB_MAX
|
|
|
|
/*
|
|
* Define the size of our QIN and QOUT FIFOs. They must be a power of 2
|
|
* in size and accommodate as many transactions as can be queued concurrently.
|
|
*/
|
|
#define AHD_QIN_SIZE AHD_MAX_QUEUE
|
|
#define AHD_QOUT_SIZE AHD_MAX_QUEUE
|
|
|
|
#define AHD_QIN_WRAP(x) ((x) & (AHD_QIN_SIZE-1))
|
|
/*
|
|
* The maximum amount of SCB storage we allocate in host memory.
|
|
*/
|
|
#define AHD_SCB_MAX_ALLOC AHD_MAX_QUEUE
|
|
|
|
/*
|
|
* Ring Buffer of incoming target commands.
|
|
* We allocate 256 to simplify the logic in the sequencer
|
|
* by using the natural wrap point of an 8bit counter.
|
|
*/
|
|
#define AHD_TMODE_CMDS 256
|
|
|
|
/* Reset line assertion time in us */
|
|
#define AHD_BUSRESET_DELAY 25
|
|
|
|
/******************* Chip Characteristics/Operating Settings *****************/
|
|
/*
|
|
* Chip Type
|
|
* The chip order is from least sophisticated to most sophisticated.
|
|
*/
|
|
typedef enum {
|
|
AHD_NONE = 0x0000,
|
|
AHD_CHIPID_MASK = 0x00FF,
|
|
AHD_AIC7901 = 0x0001,
|
|
AHD_AIC7902 = 0x0002,
|
|
AHD_AIC7901A = 0x0003,
|
|
AHD_PCI = 0x0100, /* Bus type PCI */
|
|
AHD_PCIX = 0x0200, /* Bus type PCIX */
|
|
AHD_BUS_MASK = 0x0F00
|
|
} ahd_chip;
|
|
|
|
/*
|
|
* Features available in each chip type.
|
|
*/
|
|
typedef enum {
|
|
AHD_FENONE = 0x00000,
|
|
AHD_WIDE = 0x00001,/* Wide Channel */
|
|
AHD_AIC79XXB_SLOWCRC = 0x00002,/* SLOWCRC bit should be set */
|
|
AHD_MULTI_FUNC = 0x00100,/* Multi-Function/Channel Device */
|
|
AHD_TARGETMODE = 0x01000,/* Has tested target mode support */
|
|
AHD_MULTIROLE = 0x02000,/* Space for two roles at a time */
|
|
AHD_RTI = 0x04000,/* Retained Training Support */
|
|
AHD_NEW_IOCELL_OPTS = 0x08000,/* More Signal knobs in the IOCELL */
|
|
AHD_NEW_DFCNTRL_OPTS = 0x10000,/* SCSIENWRDIS bit */
|
|
AHD_FAST_CDB_DELIVERY = 0x20000,/* CDB acks released to Output Sync */
|
|
AHD_REMOVABLE = 0x00000,/* Hot-Swap supported - None so far*/
|
|
AHD_AIC7901_FE = AHD_FENONE,
|
|
AHD_AIC7901A_FE = AHD_FENONE,
|
|
AHD_AIC7902_FE = AHD_MULTI_FUNC
|
|
} ahd_feature;
|
|
|
|
/*
|
|
* Bugs in the silicon that we work around in software.
|
|
*/
|
|
typedef enum {
|
|
AHD_BUGNONE = 0x0000,
|
|
/*
|
|
* Rev A hardware fails to update LAST/CURR/NEXTSCB
|
|
* correctly in certain packetized selection cases.
|
|
*/
|
|
AHD_SENT_SCB_UPDATE_BUG = 0x0001,
|
|
/* The wrong SCB is accessed to check the abort pending bit. */
|
|
AHD_ABORT_LQI_BUG = 0x0002,
|
|
/* Packetized bitbucket crosses packet boundaries. */
|
|
AHD_PKT_BITBUCKET_BUG = 0x0004,
|
|
/* The selection timer runs twice as long as its setting. */
|
|
AHD_LONG_SETIMO_BUG = 0x0008,
|
|
/* The Non-LQ CRC error status is delayed until phase change. */
|
|
AHD_NLQICRC_DELAYED_BUG = 0x0010,
|
|
/* The chip must be reset for all outgoing bus resets. */
|
|
AHD_SCSIRST_BUG = 0x0020,
|
|
/* Some PCIX fields must be saved and restored across chip reset. */
|
|
AHD_PCIX_CHIPRST_BUG = 0x0040,
|
|
/* MMAPIO is not functional in PCI-X mode. */
|
|
AHD_PCIX_MMAPIO_BUG = 0x0080,
|
|
/* Reads to SCBRAM fail to reset the discard timer. */
|
|
AHD_PCIX_SCBRAM_RD_BUG = 0x0100,
|
|
/* Bug workarounds that can be disabled on non-PCIX busses. */
|
|
AHD_PCIX_BUG_MASK = AHD_PCIX_CHIPRST_BUG
|
|
| AHD_PCIX_MMAPIO_BUG
|
|
| AHD_PCIX_SCBRAM_RD_BUG,
|
|
/*
|
|
* LQOSTOP0 status set even for forced selections with ATN
|
|
* to perform non-packetized message delivery.
|
|
*/
|
|
AHD_LQO_ATNO_BUG = 0x0200,
|
|
/* FIFO auto-flush does not always trigger. */
|
|
AHD_AUTOFLUSH_BUG = 0x0400,
|
|
/* The CLRLQO registers are not self-clearing. */
|
|
AHD_CLRLQO_AUTOCLR_BUG = 0x0800,
|
|
/* The PACKETIZED status bit refers to the previous connection. */
|
|
AHD_PKTIZED_STATUS_BUG = 0x1000,
|
|
/* "Short Luns" are not placed into outgoing LQ packets correctly. */
|
|
AHD_PKT_LUN_BUG = 0x2000,
|
|
/*
|
|
* Only the FIFO allocated to the non-packetized connection may
|
|
* be in use during a non-packetzied connection.
|
|
*/
|
|
AHD_NONPACKFIFO_BUG = 0x4000,
|
|
/*
|
|
* Writing to a DFF SCBPTR register may fail if concurent with
|
|
* a hardware write to the other DFF SCBPTR register. This is
|
|
* not currently a concern in our sequencer since all chips with
|
|
* this bug have the AHD_NONPACKFIFO_BUG and all writes of concern
|
|
* occur in non-packetized connections.
|
|
*/
|
|
AHD_MDFF_WSCBPTR_BUG = 0x8000,
|
|
/* SGHADDR updates are slow. */
|
|
AHD_REG_SLOW_SETTLE_BUG = 0x10000,
|
|
/*
|
|
* Changing the MODE_PTR coincident with an interrupt that
|
|
* switches to a different mode will cause the interrupt to
|
|
* be in the mode written outside of interrupt context.
|
|
*/
|
|
AHD_SET_MODE_BUG = 0x20000,
|
|
/* Non-packetized busfree revision does not work. */
|
|
AHD_BUSFREEREV_BUG = 0x40000,
|
|
/*
|
|
* Paced transfers are indicated with a non-standard PPR
|
|
* option bit in the neg table, 160MHz is indicated by
|
|
* sync factor 0x7, and the offset if off by a factor of 2.
|
|
*/
|
|
AHD_PACED_NEGTABLE_BUG = 0x80000,
|
|
/* LQOOVERRUN false positives. */
|
|
AHD_LQOOVERRUN_BUG = 0x100000,
|
|
/*
|
|
* Controller write to INTSTAT will lose to a host
|
|
* write to CLRINT.
|
|
*/
|
|
AHD_INTCOLLISION_BUG = 0x200000,
|
|
/*
|
|
* The GEM318 violates the SCSI spec by not waiting
|
|
* the mandated bus settle delay between phase changes
|
|
* in some situations. Some aic79xx chip revs. are more
|
|
* strict in this regard and will treat REQ assertions
|
|
* that fall within the bus settle delay window as
|
|
* glitches. This flag tells the firmware to tolerate
|
|
* early REQ assertions.
|
|
*/
|
|
AHD_EARLY_REQ_BUG = 0x400000,
|
|
/*
|
|
* The LED does not stay on long enough in packetized modes.
|
|
*/
|
|
AHD_FAINT_LED_BUG = 0x800000
|
|
} ahd_bug;
|
|
|
|
/*
|
|
* Configuration specific settings.
|
|
* The driver determines these settings by probing the
|
|
* chip/controller's configuration.
|
|
*/
|
|
typedef enum {
|
|
AHD_FNONE = 0x00000,
|
|
AHD_BOOT_CHANNEL = 0x00001,/* We were set as the boot channel. */
|
|
AHD_USEDEFAULTS = 0x00004,/*
|
|
* For cards without an seeprom
|
|
* or a BIOS to initialize the chip's
|
|
* SRAM, we use the default target
|
|
* settings.
|
|
*/
|
|
AHD_SEQUENCER_DEBUG = 0x00008,
|
|
AHD_RESET_BUS_A = 0x00010,
|
|
AHD_EXTENDED_TRANS_A = 0x00020,
|
|
AHD_TERM_ENB_A = 0x00040,
|
|
AHD_SPCHK_ENB_A = 0x00080,
|
|
AHD_STPWLEVEL_A = 0x00100,
|
|
AHD_INITIATORROLE = 0x00200,/*
|
|
* Allow initiator operations on
|
|
* this controller.
|
|
*/
|
|
AHD_TARGETROLE = 0x00400,/*
|
|
* Allow target operations on this
|
|
* controller.
|
|
*/
|
|
AHD_RESOURCE_SHORTAGE = 0x00800,
|
|
AHD_TQINFIFO_BLOCKED = 0x01000,/* Blocked waiting for ATIOs */
|
|
AHD_INT50_SPEEDFLEX = 0x02000,/*
|
|
* Internal 50pin connector
|
|
* sits behind an aic3860
|
|
*/
|
|
AHD_BIOS_ENABLED = 0x04000,
|
|
AHD_ALL_INTERRUPTS = 0x08000,
|
|
AHD_39BIT_ADDRESSING = 0x10000,/* Use 39 bit addressing scheme. */
|
|
AHD_64BIT_ADDRESSING = 0x20000,/* Use 64 bit addressing scheme. */
|
|
AHD_CURRENT_SENSING = 0x40000,
|
|
AHD_SCB_CONFIG_USED = 0x80000,/* No SEEPROM but SCB had info. */
|
|
AHD_HP_BOARD = 0x100000,
|
|
AHD_BUS_RESET_ACTIVE = 0x200000,
|
|
AHD_UPDATE_PEND_CMDS = 0x400000,
|
|
AHD_RUNNING_QOUTFIFO = 0x800000,
|
|
AHD_HAD_FIRST_SEL = 0x1000000
|
|
} ahd_flag;
|
|
|
|
/************************* Hardware SCB Definition ***************************/
|
|
|
|
/*
|
|
* The driver keeps up to MAX_SCB scb structures per card in memory. The SCB
|
|
* consists of a "hardware SCB" mirroring the fields available on the card
|
|
* and additional information the kernel stores for each transaction.
|
|
*
|
|
* To minimize space utilization, a portion of the hardware scb stores
|
|
* different data during different portions of a SCSI transaction.
|
|
* As initialized by the host driver for the initiator role, this area
|
|
* contains the SCSI cdb (or a pointer to the cdb) to be executed. After
|
|
* the cdb has been presented to the target, this area serves to store
|
|
* residual transfer information and the SCSI status byte.
|
|
* For the target role, the contents of this area do not change, but
|
|
* still serve a different purpose than for the initiator role. See
|
|
* struct target_data for details.
|
|
*/
|
|
|
|
/*
|
|
* Status information embedded in the shared poriton of
|
|
* an SCB after passing the cdb to the target. The kernel
|
|
* driver will only read this data for transactions that
|
|
* complete abnormally.
|
|
*/
|
|
struct initiator_status {
|
|
uint32_t residual_datacnt; /* Residual in the current S/G seg */
|
|
uint32_t residual_sgptr; /* The next S/G for this transfer */
|
|
uint8_t scsi_status; /* Standard SCSI status byte */
|
|
};
|
|
|
|
struct target_status {
|
|
uint32_t residual_datacnt; /* Residual in the current S/G seg */
|
|
uint32_t residual_sgptr; /* The next S/G for this transfer */
|
|
uint8_t scsi_status; /* SCSI status to give to initiator */
|
|
uint8_t target_phases; /* Bitmap of phases to execute */
|
|
uint8_t data_phase; /* Data-In or Data-Out */
|
|
uint8_t initiator_tag; /* Initiator's transaction tag */
|
|
};
|
|
|
|
/*
|
|
* Initiator mode SCB shared data area.
|
|
* If the embedded CDB is 12 bytes or less, we embed
|
|
* the sense buffer address in the SCB. This allows
|
|
* us to retrieve sense information without interrupting
|
|
* the host in packetized mode.
|
|
*/
|
|
typedef uint32_t sense_addr_t;
|
|
#define MAX_CDB_LEN 16
|
|
#define MAX_CDB_LEN_WITH_SENSE_ADDR (MAX_CDB_LEN - sizeof(sense_addr_t))
|
|
union initiator_data {
|
|
struct {
|
|
uint64_t cdbptr;
|
|
uint8_t cdblen;
|
|
} cdb_from_host;
|
|
uint8_t cdb[MAX_CDB_LEN];
|
|
struct {
|
|
uint8_t cdb[MAX_CDB_LEN_WITH_SENSE_ADDR];
|
|
sense_addr_t sense_addr;
|
|
} cdb_plus_saddr;
|
|
};
|
|
|
|
/*
|
|
* Target mode version of the shared data SCB segment.
|
|
*/
|
|
struct target_data {
|
|
uint32_t spare[2];
|
|
uint8_t scsi_status; /* SCSI status to give to initiator */
|
|
uint8_t target_phases; /* Bitmap of phases to execute */
|
|
uint8_t data_phase; /* Data-In or Data-Out */
|
|
uint8_t initiator_tag; /* Initiator's transaction tag */
|
|
};
|
|
|
|
struct hardware_scb {
|
|
/*0*/ union {
|
|
union initiator_data idata;
|
|
struct target_data tdata;
|
|
struct initiator_status istatus;
|
|
struct target_status tstatus;
|
|
} shared_data;
|
|
/*
|
|
* A word about residuals.
|
|
* The scb is presented to the sequencer with the dataptr and datacnt
|
|
* fields initialized to the contents of the first S/G element to
|
|
* transfer. The sgptr field is initialized to the bus address for
|
|
* the S/G element that follows the first in the in core S/G array
|
|
* or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid
|
|
* S/G entry for this transfer (single S/G element transfer with the
|
|
* first elements address and length preloaded in the dataptr/datacnt
|
|
* fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL.
|
|
* The SG_FULL_RESID flag ensures that the residual will be correctly
|
|
* noted even if no data transfers occur. Once the data phase is entered,
|
|
* the residual sgptr and datacnt are loaded from the sgptr and the
|
|
* datacnt fields. After each S/G element's dataptr and length are
|
|
* loaded into the hardware, the residual sgptr is advanced. After
|
|
* each S/G element is expired, its datacnt field is checked to see
|
|
* if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the
|
|
* residual sg ptr and the transfer is considered complete. If the
|
|
* sequencer determines that there is a residual in the tranfer, or
|
|
* there is non-zero status, it will set the SG_STATUS_VALID flag in
|
|
* sgptr and dma the scb back into host memory. To sumarize:
|
|
*
|
|
* Sequencer:
|
|
* o A residual has occurred if SG_FULL_RESID is set in sgptr,
|
|
* or residual_sgptr does not have SG_LIST_NULL set.
|
|
*
|
|
* o We are transferring the last segment if residual_datacnt has
|
|
* the SG_LAST_SEG flag set.
|
|
*
|
|
* Host:
|
|
* o A residual can only have occurred if a completed scb has the
|
|
* SG_STATUS_VALID flag set. Inspection of the SCSI status field,
|
|
* the residual_datacnt, and the residual_sgptr field will tell
|
|
* for sure.
|
|
*
|
|
* o residual_sgptr and sgptr refer to the "next" sg entry
|
|
* and so may point beyond the last valid sg entry for the
|
|
* transfer.
|
|
*/
|
|
#define SG_PTR_MASK 0xFFFFFFF8
|
|
/*16*/ uint16_t tag; /* Reused by Sequencer. */
|
|
/*18*/ uint8_t control; /* See SCB_CONTROL in aic79xx.reg for details */
|
|
/*19*/ uint8_t scsiid; /*
|
|
* Selection out Id
|
|
* Our Id (bits 0-3) Their ID (bits 4-7)
|
|
*/
|
|
/*20*/ uint8_t lun;
|
|
/*21*/ uint8_t task_attribute;
|
|
/*22*/ uint8_t cdb_len;
|
|
/*23*/ uint8_t task_management;
|
|
/*24*/ uint64_t dataptr;
|
|
/*32*/ uint32_t datacnt; /* Byte 3 is spare. */
|
|
/*36*/ uint32_t sgptr;
|
|
/*40*/ uint32_t hscb_busaddr;
|
|
/*44*/ uint32_t next_hscb_busaddr;
|
|
/********** Long lun field only downloaded for full 8 byte lun support ********/
|
|
/*48*/ uint8_t pkt_long_lun[8];
|
|
/******* Fields below are not Downloaded (Sequencer may use for scratch) ******/
|
|
/*56*/ uint8_t spare[8];
|
|
};
|
|
|
|
/************************ Kernel SCB Definitions ******************************/
|
|
/*
|
|
* Some fields of the SCB are OS dependent. Here we collect the
|
|
* definitions for elements that all OS platforms need to include
|
|
* in there SCB definition.
|
|
*/
|
|
|
|
/*
|
|
* Definition of a scatter/gather element as transferred to the controller.
|
|
* The aic7xxx chips only support a 24bit length. We use the top byte of
|
|
* the length to store additional address bits and a flag to indicate
|
|
* that a given segment terminates the transfer. This gives us an
|
|
* addressable range of 512GB on machines with 64bit PCI or with chips
|
|
* that can support dual address cycles on 32bit PCI busses.
|
|
*/
|
|
struct ahd_dma_seg {
|
|
uint32_t addr;
|
|
uint32_t len;
|
|
#define AHD_DMA_LAST_SEG 0x80000000
|
|
#define AHD_SG_HIGH_ADDR_MASK 0x7F000000
|
|
#define AHD_SG_LEN_MASK 0x00FFFFFF
|
|
};
|
|
|
|
struct ahd_dma64_seg {
|
|
uint64_t addr;
|
|
uint32_t len;
|
|
uint32_t pad;
|
|
};
|
|
|
|
struct map_node {
|
|
bus_dmamap_t dmamap;
|
|
dma_addr_t physaddr;
|
|
uint8_t *vaddr;
|
|
SLIST_ENTRY(map_node) links;
|
|
};
|
|
|
|
/*
|
|
* The current state of this SCB.
|
|
*/
|
|
typedef enum {
|
|
SCB_FLAG_NONE = 0x00000,
|
|
SCB_TRANSMISSION_ERROR = 0x00001,/*
|
|
* We detected a parity or CRC
|
|
* error that has effected the
|
|
* payload of the command. This
|
|
* flag is checked when normal
|
|
* status is returned to catch
|
|
* the case of a target not
|
|
* responding to our attempt
|
|
* to report the error.
|
|
*/
|
|
SCB_OTHERTCL_TIMEOUT = 0x00002,/*
|
|
* Another device was active
|
|
* during the first timeout for
|
|
* this SCB so we gave ourselves
|
|
* an additional timeout period
|
|
* in case it was hogging the
|
|
* bus.
|
|
*/
|
|
SCB_DEVICE_RESET = 0x00004,
|
|
SCB_SENSE = 0x00008,
|
|
SCB_CDB32_PTR = 0x00010,
|
|
SCB_RECOVERY_SCB = 0x00020,
|
|
SCB_AUTO_NEGOTIATE = 0x00040,/* Negotiate to achieve goal. */
|
|
SCB_NEGOTIATE = 0x00080,/* Negotiation forced for command. */
|
|
SCB_ABORT = 0x00100,
|
|
SCB_ACTIVE = 0x00200,
|
|
SCB_TARGET_IMMEDIATE = 0x00400,
|
|
SCB_PACKETIZED = 0x00800,
|
|
SCB_EXPECT_PPR_BUSFREE = 0x01000,
|
|
SCB_PKT_SENSE = 0x02000,
|
|
SCB_EXTERNAL_RESET = 0x04000,/* Device was reset externally */
|
|
SCB_ON_COL_LIST = 0x08000,
|
|
SCB_SILENT = 0x10000 /*
|
|
* Be quiet about transmission type
|
|
* errors. They are expected and we
|
|
* don't want to upset the user. This
|
|
* flag is typically used during DV.
|
|
*/
|
|
} scb_flag;
|
|
|
|
struct scb {
|
|
struct hardware_scb *hscb;
|
|
union {
|
|
SLIST_ENTRY(scb) sle;
|
|
LIST_ENTRY(scb) le;
|
|
TAILQ_ENTRY(scb) tqe;
|
|
} links;
|
|
union {
|
|
SLIST_ENTRY(scb) sle;
|
|
LIST_ENTRY(scb) le;
|
|
TAILQ_ENTRY(scb) tqe;
|
|
} links2;
|
|
#define pending_links links2.le
|
|
#define collision_links links2.le
|
|
struct scb *col_scb;
|
|
ahd_io_ctx_t io_ctx;
|
|
struct ahd_softc *ahd_softc;
|
|
scb_flag flags;
|
|
#ifndef __linux__
|
|
bus_dmamap_t dmamap;
|
|
#endif
|
|
struct scb_platform_data *platform_data;
|
|
struct map_node *hscb_map;
|
|
struct map_node *sg_map;
|
|
struct map_node *sense_map;
|
|
void *sg_list;
|
|
uint8_t *sense_data;
|
|
dma_addr_t sg_list_busaddr;
|
|
dma_addr_t sense_busaddr;
|
|
u_int sg_count;/* How full ahd_dma_seg is */
|
|
#define AHD_MAX_LQ_CRC_ERRORS 5
|
|
u_int crc_retry_count;
|
|
};
|
|
|
|
TAILQ_HEAD(scb_tailq, scb);
|
|
LIST_HEAD(scb_list, scb);
|
|
|
|
struct scb_data {
|
|
/*
|
|
* TAILQ of lists of free SCBs grouped by device
|
|
* collision domains.
|
|
*/
|
|
struct scb_tailq free_scbs;
|
|
|
|
/*
|
|
* Per-device lists of SCBs whose tag ID would collide
|
|
* with an already active tag on the device.
|
|
*/
|
|
struct scb_list free_scb_lists[AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT];
|
|
|
|
/*
|
|
* SCBs that will not collide with any active device.
|
|
*/
|
|
struct scb_list any_dev_free_scb_list;
|
|
|
|
/*
|
|
* Mapping from tag to SCB.
|
|
*/
|
|
struct scb *scbindex[AHD_SCB_MAX];
|
|
|
|
/*
|
|
* "Bus" addresses of our data structures.
|
|
*/
|
|
bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */
|
|
bus_dma_tag_t sg_dmat; /* dmat for our sg segments */
|
|
bus_dma_tag_t sense_dmat; /* dmat for our sense buffers */
|
|
SLIST_HEAD(, map_node) hscb_maps;
|
|
SLIST_HEAD(, map_node) sg_maps;
|
|
SLIST_HEAD(, map_node) sense_maps;
|
|
int scbs_left; /* unallocated scbs in head map_node */
|
|
int sgs_left; /* unallocated sgs in head map_node */
|
|
int sense_left; /* unallocated sense in head map_node */
|
|
uint16_t numscbs;
|
|
uint16_t maxhscbs; /* Number of SCBs on the card */
|
|
uint8_t init_level; /*
|
|
* How far we've initialized
|
|
* this structure.
|
|
*/
|
|
};
|
|
|
|
/************************ Target Mode Definitions *****************************/
|
|
|
|
/*
|
|
* Connection descriptor for select-in requests in target mode.
|
|
*/
|
|
struct target_cmd {
|
|
uint8_t scsiid; /* Our ID and the initiator's ID */
|
|
uint8_t identify; /* Identify message */
|
|
uint8_t bytes[22]; /*
|
|
* Bytes contains any additional message
|
|
* bytes terminated by 0xFF. The remainder
|
|
* is the cdb to execute.
|
|
*/
|
|
uint8_t cmd_valid; /*
|
|
* When a command is complete, the firmware
|
|
* will set cmd_valid to all bits set.
|
|
* After the host has seen the command,
|
|
* the bits are cleared. This allows us
|
|
* to just peek at host memory to determine
|
|
* if more work is complete. cmd_valid is on
|
|
* an 8 byte boundary to simplify setting
|
|
* it on aic7880 hardware which only has
|
|
* limited direct access to the DMA FIFO.
|
|
*/
|
|
uint8_t pad[7];
|
|
};
|
|
|
|
/*
|
|
* Number of events we can buffer up if we run out
|
|
* of immediate notify ccbs.
|
|
*/
|
|
#define AHD_TMODE_EVENT_BUFFER_SIZE 8
|
|
struct ahd_tmode_event {
|
|
uint8_t initiator_id;
|
|
uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */
|
|
#define EVENT_TYPE_BUS_RESET 0xFF
|
|
uint8_t event_arg;
|
|
};
|
|
|
|
/*
|
|
* Per enabled lun target mode state.
|
|
* As this state is directly influenced by the host OS'es target mode
|
|
* environment, we let the OS module define it. Forward declare the
|
|
* structure here so we can store arrays of them, etc. in OS neutral
|
|
* data structures.
|
|
*/
|
|
#ifdef AHD_TARGET_MODE
|
|
struct ahd_tmode_lstate {
|
|
struct cam_path *path;
|
|
struct ccb_hdr_slist accept_tios;
|
|
struct ccb_hdr_slist immed_notifies;
|
|
struct ahd_tmode_event event_buffer[AHD_TMODE_EVENT_BUFFER_SIZE];
|
|
uint8_t event_r_idx;
|
|
uint8_t event_w_idx;
|
|
};
|
|
#else
|
|
struct ahd_tmode_lstate;
|
|
#endif
|
|
|
|
/******************** Transfer Negotiation Datastructures *********************/
|
|
#define AHD_TRANS_CUR 0x01 /* Modify current neogtiation status */
|
|
#define AHD_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */
|
|
#define AHD_TRANS_GOAL 0x04 /* Modify negotiation goal */
|
|
#define AHD_TRANS_USER 0x08 /* Modify user negotiation settings */
|
|
#define AHD_PERIOD_10MHz 0x19
|
|
|
|
#define AHD_WIDTH_UNKNOWN 0xFF
|
|
#define AHD_PERIOD_UNKNOWN 0xFF
|
|
#define AHD_OFFSET_UNKNOWN 0xFF
|
|
#define AHD_PPR_OPTS_UNKNOWN 0xFF
|
|
|
|
/*
|
|
* Transfer Negotiation Information.
|
|
*/
|
|
struct ahd_transinfo {
|
|
uint8_t protocol_version; /* SCSI Revision level */
|
|
uint8_t transport_version; /* SPI Revision level */
|
|
uint8_t width; /* Bus width */
|
|
uint8_t period; /* Sync rate factor */
|
|
uint8_t offset; /* Sync offset */
|
|
uint8_t ppr_options; /* Parallel Protocol Request options */
|
|
};
|
|
|
|
/*
|
|
* Per-initiator current, goal and user transfer negotiation information. */
|
|
struct ahd_initiator_tinfo {
|
|
struct ahd_transinfo curr;
|
|
struct ahd_transinfo goal;
|
|
struct ahd_transinfo user;
|
|
};
|
|
|
|
/*
|
|
* Per enabled target ID state.
|
|
* Pointers to lun target state as well as sync/wide negotiation information
|
|
* for each initiator<->target mapping. For the initiator role we pretend
|
|
* that we are the target and the targets are the initiators since the
|
|
* negotiation is the same regardless of role.
|
|
*/
|
|
struct ahd_tmode_tstate {
|
|
struct ahd_tmode_lstate* enabled_luns[AHD_NUM_LUNS];
|
|
struct ahd_initiator_tinfo transinfo[AHD_NUM_TARGETS];
|
|
|
|
/*
|
|
* Per initiator state bitmasks.
|
|
*/
|
|
uint16_t auto_negotiate;/* Auto Negotiation Required */
|
|
uint16_t discenable; /* Disconnection allowed */
|
|
uint16_t tagenable; /* Tagged Queuing allowed */
|
|
};
|
|
|
|
/*
|
|
* Points of interest along the negotiated transfer scale.
|
|
*/
|
|
#define AHD_SYNCRATE_160 0x8
|
|
#define AHD_SYNCRATE_PACED 0x8
|
|
#define AHD_SYNCRATE_DT 0x9
|
|
#define AHD_SYNCRATE_ULTRA2 0xa
|
|
#define AHD_SYNCRATE_ULTRA 0xc
|
|
#define AHD_SYNCRATE_FAST 0x19
|
|
#define AHD_SYNCRATE_MIN_DT AHD_SYNCRATE_FAST
|
|
#define AHD_SYNCRATE_SYNC 0x32
|
|
#define AHD_SYNCRATE_MIN 0x60
|
|
#define AHD_SYNCRATE_ASYNC 0xFF
|
|
#define AHD_SYNCRATE_MAX AHD_SYNCRATE_160
|
|
|
|
/* Safe and valid period for async negotiations. */
|
|
#define AHD_ASYNC_XFER_PERIOD 0x44
|
|
|
|
/*
|
|
* In RevA, the synctable uses a 120MHz rate for the period
|
|
* factor 8 and 160MHz for the period factor 7. The 120MHz
|
|
* rate never made it into the official SCSI spec, so we must
|
|
* compensate when setting the negotiation table for Rev A
|
|
* parts.
|
|
*/
|
|
#define AHD_SYNCRATE_REVA_120 0x8
|
|
#define AHD_SYNCRATE_REVA_160 0x7
|
|
|
|
/***************************** Lookup Tables **********************************/
|
|
/*
|
|
* Phase -> name and message out response
|
|
* to parity errors in each phase table.
|
|
*/
|
|
struct ahd_phase_table_entry {
|
|
uint8_t phase;
|
|
uint8_t mesg_out; /* Message response to parity errors */
|
|
const char *phasemsg;
|
|
};
|
|
|
|
/************************** Serial EEPROM Format ******************************/
|
|
|
|
struct seeprom_config {
|
|
/*
|
|
* Per SCSI ID Configuration Flags
|
|
*/
|
|
uint16_t device_flags[16]; /* words 0-15 */
|
|
#define CFXFER 0x003F /* synchronous transfer rate */
|
|
#define CFXFER_ASYNC 0x3F
|
|
#define CFQAS 0x0040 /* Negotiate QAS */
|
|
#define CFPACKETIZED 0x0080 /* Negotiate Packetized Transfers */
|
|
#define CFSTART 0x0100 /* send start unit SCSI command */
|
|
#define CFINCBIOS 0x0200 /* include in BIOS scan */
|
|
#define CFDISC 0x0400 /* enable disconnection */
|
|
#define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */
|
|
#define CFWIDEB 0x1000 /* wide bus device */
|
|
#define CFHOSTMANAGED 0x8000 /* Managed by a RAID controller */
|
|
|
|
/*
|
|
* BIOS Control Bits
|
|
*/
|
|
uint16_t bios_control; /* word 16 */
|
|
#define CFSUPREM 0x0001 /* support all removeable drives */
|
|
#define CFSUPREMB 0x0002 /* support removeable boot drives */
|
|
#define CFBIOSSTATE 0x000C /* BIOS Action State */
|
|
#define CFBS_DISABLED 0x00
|
|
#define CFBS_ENABLED 0x04
|
|
#define CFBS_DISABLED_SCAN 0x08
|
|
#define CFENABLEDV 0x0010 /* Perform Domain Validation */
|
|
#define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */
|
|
#define CFSPARITY 0x0040 /* SCSI parity */
|
|
#define CFEXTEND 0x0080 /* extended translation enabled */
|
|
#define CFBOOTCD 0x0100 /* Support Bootable CD-ROM */
|
|
#define CFMSG_LEVEL 0x0600 /* BIOS Message Level */
|
|
#define CFMSG_VERBOSE 0x0000
|
|
#define CFMSG_SILENT 0x0200
|
|
#define CFMSG_DIAG 0x0400
|
|
#define CFRESETB 0x0800 /* reset SCSI bus at boot */
|
|
/* UNUSED 0xf000 */
|
|
|
|
/*
|
|
* Host Adapter Control Bits
|
|
*/
|
|
uint16_t adapter_control; /* word 17 */
|
|
#define CFAUTOTERM 0x0001 /* Perform Auto termination */
|
|
#define CFSTERM 0x0002 /* SCSI low byte termination */
|
|
#define CFWSTERM 0x0004 /* SCSI high byte termination */
|
|
#define CFSEAUTOTERM 0x0008 /* Ultra2 Perform secondary Auto Term*/
|
|
#define CFSELOWTERM 0x0010 /* Ultra2 secondary low term */
|
|
#define CFSEHIGHTERM 0x0020 /* Ultra2 secondary high term */
|
|
#define CFSTPWLEVEL 0x0040 /* Termination level control */
|
|
#define CFBIOSAUTOTERM 0x0080 /* Perform Auto termination */
|
|
#define CFTERM_MENU 0x0100 /* BIOS displays termination menu */
|
|
#define CFCLUSTERENB 0x8000 /* Cluster Enable */
|
|
|
|
/*
|
|
* Bus Release Time, Host Adapter ID
|
|
*/
|
|
uint16_t brtime_id; /* word 18 */
|
|
#define CFSCSIID 0x000f /* host adapter SCSI ID */
|
|
/* UNUSED 0x00f0 */
|
|
#define CFBRTIME 0xff00 /* bus release time/PCI Latency Time */
|
|
|
|
/*
|
|
* Maximum targets
|
|
*/
|
|
uint16_t max_targets; /* word 19 */
|
|
#define CFMAXTARG 0x00ff /* maximum targets */
|
|
#define CFBOOTLUN 0x0f00 /* Lun to boot from */
|
|
#define CFBOOTID 0xf000 /* Target to boot from */
|
|
uint16_t res_1[10]; /* words 20-29 */
|
|
uint16_t signature; /* BIOS Signature */
|
|
#define CFSIGNATURE 0x400
|
|
uint16_t checksum; /* word 31 */
|
|
};
|
|
|
|
/*
|
|
* Vital Product Data used during POST and by the BIOS.
|
|
*/
|
|
struct vpd_config {
|
|
uint8_t bios_flags;
|
|
#define VPDMASTERBIOS 0x0001
|
|
#define VPDBOOTHOST 0x0002
|
|
uint8_t reserved_1[21];
|
|
uint8_t resource_type;
|
|
uint8_t resource_len[2];
|
|
uint8_t resource_data[8];
|
|
uint8_t vpd_tag;
|
|
uint16_t vpd_len;
|
|
uint8_t vpd_keyword[2];
|
|
uint8_t length;
|
|
uint8_t revision;
|
|
uint8_t device_flags;
|
|
uint8_t termination_menus[2];
|
|
uint8_t fifo_threshold;
|
|
uint8_t end_tag;
|
|
uint8_t vpd_checksum;
|
|
uint16_t default_target_flags;
|
|
uint16_t default_bios_flags;
|
|
uint16_t default_ctrl_flags;
|
|
uint8_t default_irq;
|
|
uint8_t pci_lattime;
|
|
uint8_t max_target;
|
|
uint8_t boot_lun;
|
|
uint16_t signature;
|
|
uint8_t reserved_2;
|
|
uint8_t checksum;
|
|
uint8_t reserved_3[4];
|
|
};
|
|
|
|
/****************************** Flexport Logic ********************************/
|
|
#define FLXADDR_TERMCTL 0x0
|
|
#define FLX_TERMCTL_ENSECHIGH 0x8
|
|
#define FLX_TERMCTL_ENSECLOW 0x4
|
|
#define FLX_TERMCTL_ENPRIHIGH 0x2
|
|
#define FLX_TERMCTL_ENPRILOW 0x1
|
|
#define FLXADDR_ROMSTAT_CURSENSECTL 0x1
|
|
#define FLX_ROMSTAT_SEECFG 0xF0
|
|
#define FLX_ROMSTAT_EECFG 0x0F
|
|
#define FLX_ROMSTAT_SEE_93C66 0x00
|
|
#define FLX_ROMSTAT_SEE_NONE 0xF0
|
|
#define FLX_ROMSTAT_EE_512x8 0x0
|
|
#define FLX_ROMSTAT_EE_1MBx8 0x1
|
|
#define FLX_ROMSTAT_EE_2MBx8 0x2
|
|
#define FLX_ROMSTAT_EE_4MBx8 0x3
|
|
#define FLX_ROMSTAT_EE_16MBx8 0x4
|
|
#define CURSENSE_ENB 0x1
|
|
#define FLXADDR_FLEXSTAT 0x2
|
|
#define FLX_FSTAT_BUSY 0x1
|
|
#define FLXADDR_CURRENT_STAT 0x4
|
|
#define FLX_CSTAT_SEC_HIGH 0xC0
|
|
#define FLX_CSTAT_SEC_LOW 0x30
|
|
#define FLX_CSTAT_PRI_HIGH 0x0C
|
|
#define FLX_CSTAT_PRI_LOW 0x03
|
|
#define FLX_CSTAT_MASK 0x03
|
|
#define FLX_CSTAT_SHIFT 2
|
|
#define FLX_CSTAT_OKAY 0x0
|
|
#define FLX_CSTAT_OVER 0x1
|
|
#define FLX_CSTAT_UNDER 0x2
|
|
#define FLX_CSTAT_INVALID 0x3
|
|
|
|
int ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf,
|
|
u_int start_addr, u_int count, int bstream);
|
|
|
|
int ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
|
|
u_int start_addr, u_int count);
|
|
int ahd_verify_cksum(struct seeprom_config *sc);
|
|
int ahd_acquire_seeprom(struct ahd_softc *ahd);
|
|
void ahd_release_seeprom(struct ahd_softc *ahd);
|
|
|
|
/**************************** Message Buffer *********************************/
|
|
typedef enum {
|
|
MSG_FLAG_NONE = 0x00,
|
|
MSG_FLAG_EXPECT_PPR_BUSFREE = 0x01,
|
|
MSG_FLAG_IU_REQ_CHANGED = 0x02,
|
|
MSG_FLAG_EXPECT_IDE_BUSFREE = 0x04,
|
|
MSG_FLAG_EXPECT_QASREJ_BUSFREE = 0x08,
|
|
MSG_FLAG_PACKETIZED = 0x10
|
|
} ahd_msg_flags;
|
|
|
|
typedef enum {
|
|
MSG_TYPE_NONE = 0x00,
|
|
MSG_TYPE_INITIATOR_MSGOUT = 0x01,
|
|
MSG_TYPE_INITIATOR_MSGIN = 0x02,
|
|
MSG_TYPE_TARGET_MSGOUT = 0x03,
|
|
MSG_TYPE_TARGET_MSGIN = 0x04
|
|
} ahd_msg_type;
|
|
|
|
typedef enum {
|
|
MSGLOOP_IN_PROG,
|
|
MSGLOOP_MSGCOMPLETE,
|
|
MSGLOOP_TERMINATED
|
|
} msg_loop_stat;
|
|
|
|
/*********************** Software Configuration Structure *********************/
|
|
struct ahd_suspend_channel_state {
|
|
uint8_t scsiseq;
|
|
uint8_t sxfrctl0;
|
|
uint8_t sxfrctl1;
|
|
uint8_t simode0;
|
|
uint8_t simode1;
|
|
uint8_t seltimer;
|
|
uint8_t seqctl;
|
|
};
|
|
|
|
struct ahd_suspend_pci_state {
|
|
uint32_t devconfig;
|
|
uint8_t command;
|
|
uint8_t csize_lattime;
|
|
};
|
|
|
|
struct ahd_suspend_state {
|
|
struct ahd_suspend_channel_state channel[2];
|
|
struct ahd_suspend_pci_state pci_state;
|
|
uint8_t optionmode;
|
|
uint8_t dscommand0;
|
|
uint8_t dspcistatus;
|
|
/* hsmailbox */
|
|
uint8_t crccontrol1;
|
|
uint8_t scbbaddr;
|
|
/* Host and sequencer SCB counts */
|
|
uint8_t dff_thrsh;
|
|
uint8_t *scratch_ram;
|
|
uint8_t *btt;
|
|
};
|
|
|
|
typedef void (*ahd_bus_intr_t)(struct ahd_softc *);
|
|
|
|
typedef enum {
|
|
AHD_MODE_DFF0,
|
|
AHD_MODE_DFF1,
|
|
AHD_MODE_CCHAN,
|
|
AHD_MODE_SCSI,
|
|
AHD_MODE_CFG,
|
|
AHD_MODE_UNKNOWN
|
|
} ahd_mode;
|
|
|
|
#define AHD_MK_MSK(x) (0x01 << (x))
|
|
#define AHD_MODE_DFF0_MSK AHD_MK_MSK(AHD_MODE_DFF0)
|
|
#define AHD_MODE_DFF1_MSK AHD_MK_MSK(AHD_MODE_DFF1)
|
|
#define AHD_MODE_CCHAN_MSK AHD_MK_MSK(AHD_MODE_CCHAN)
|
|
#define AHD_MODE_SCSI_MSK AHD_MK_MSK(AHD_MODE_SCSI)
|
|
#define AHD_MODE_CFG_MSK AHD_MK_MSK(AHD_MODE_CFG)
|
|
#define AHD_MODE_UNKNOWN_MSK AHD_MK_MSK(AHD_MODE_UNKNOWN)
|
|
#define AHD_MODE_ANY_MSK (~0)
|
|
|
|
typedef uint8_t ahd_mode_state;
|
|
|
|
typedef void ahd_callback_t (void *);
|
|
|
|
struct ahd_completion
|
|
{
|
|
uint16_t tag;
|
|
uint8_t sg_status;
|
|
uint8_t valid_tag;
|
|
};
|
|
|
|
struct ahd_softc {
|
|
bus_space_tag_t tags[2];
|
|
bus_space_handle_t bshs[2];
|
|
#ifndef __linux__
|
|
bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */
|
|
#endif
|
|
struct scb_data scb_data;
|
|
|
|
struct hardware_scb *next_queued_hscb;
|
|
struct map_node *next_queued_hscb_map;
|
|
|
|
/*
|
|
* SCBs that have been sent to the controller
|
|
*/
|
|
LIST_HEAD(, scb) pending_scbs;
|
|
|
|
/*
|
|
* Current register window mode information.
|
|
*/
|
|
ahd_mode dst_mode;
|
|
ahd_mode src_mode;
|
|
|
|
/*
|
|
* Saved register window mode information
|
|
* used for restore on next unpause.
|
|
*/
|
|
ahd_mode saved_dst_mode;
|
|
ahd_mode saved_src_mode;
|
|
|
|
/*
|
|
* Platform specific data.
|
|
*/
|
|
struct ahd_platform_data *platform_data;
|
|
|
|
/*
|
|
* Platform specific device information.
|
|
*/
|
|
ahd_dev_softc_t dev_softc;
|
|
|
|
/*
|
|
* Bus specific device information.
|
|
*/
|
|
ahd_bus_intr_t bus_intr;
|
|
|
|
/*
|
|
* Target mode related state kept on a per enabled lun basis.
|
|
* Targets that are not enabled will have null entries.
|
|
* As an initiator, we keep one target entry for our initiator
|
|
* ID to store our sync/wide transfer settings.
|
|
*/
|
|
struct ahd_tmode_tstate *enabled_targets[AHD_NUM_TARGETS];
|
|
|
|
/*
|
|
* The black hole device responsible for handling requests for
|
|
* disabled luns on enabled targets.
|
|
*/
|
|
struct ahd_tmode_lstate *black_hole;
|
|
|
|
/*
|
|
* Device instance currently on the bus awaiting a continue TIO
|
|
* for a command that was not given the disconnect priveledge.
|
|
*/
|
|
struct ahd_tmode_lstate *pending_device;
|
|
|
|
/*
|
|
* Timer handles for timer driven callbacks.
|
|
*/
|
|
ahd_timer_t reset_timer;
|
|
ahd_timer_t stat_timer;
|
|
|
|
/*
|
|
* Statistics.
|
|
*/
|
|
#define AHD_STAT_UPDATE_US 250000 /* 250ms */
|
|
#define AHD_STAT_BUCKETS 4
|
|
u_int cmdcmplt_bucket;
|
|
uint32_t cmdcmplt_counts[AHD_STAT_BUCKETS];
|
|
uint32_t cmdcmplt_total;
|
|
|
|
/*
|
|
* Card characteristics
|
|
*/
|
|
ahd_chip chip;
|
|
ahd_feature features;
|
|
ahd_bug bugs;
|
|
ahd_flag flags;
|
|
struct seeprom_config *seep_config;
|
|
|
|
/* Command Queues */
|
|
struct ahd_completion *qoutfifo;
|
|
uint16_t qoutfifonext;
|
|
uint16_t qoutfifonext_valid_tag;
|
|
uint16_t qinfifonext;
|
|
uint16_t qinfifo[AHD_SCB_MAX];
|
|
|
|
/*
|
|
* Our qfreeze count. The sequencer compares
|
|
* this value with its own counter to determine
|
|
* whether to allow selections to occur.
|
|
*/
|
|
uint16_t qfreeze_cnt;
|
|
|
|
/* Values to store in the SEQCTL register for pause and unpause */
|
|
uint8_t unpause;
|
|
uint8_t pause;
|
|
|
|
/* Critical Section Data */
|
|
struct cs *critical_sections;
|
|
u_int num_critical_sections;
|
|
|
|
/* Buffer for handling packetized bitbucket. */
|
|
uint8_t *overrun_buf;
|
|
|
|
/* Links for chaining softcs */
|
|
TAILQ_ENTRY(ahd_softc) links;
|
|
|
|
/* Channel Names ('A', 'B', etc.) */
|
|
char channel;
|
|
|
|
/* Initiator Bus ID */
|
|
uint8_t our_id;
|
|
|
|
/*
|
|
* Target incoming command FIFO.
|
|
*/
|
|
struct target_cmd *targetcmds;
|
|
uint8_t tqinfifonext;
|
|
|
|
/*
|
|
* Cached verson of the hs_mailbox so we can avoid
|
|
* pausing the sequencer during mailbox updates.
|
|
*/
|
|
uint8_t hs_mailbox;
|
|
|
|
/*
|
|
* Incoming and outgoing message handling.
|
|
*/
|
|
uint8_t send_msg_perror;
|
|
ahd_msg_flags msg_flags;
|
|
ahd_msg_type msg_type;
|
|
uint8_t msgout_buf[12];/* Message we are sending */
|
|
uint8_t msgin_buf[12];/* Message we are receiving */
|
|
u_int msgout_len; /* Length of message to send */
|
|
u_int msgout_index; /* Current index in msgout */
|
|
u_int msgin_index; /* Current index in msgin */
|
|
|
|
/*
|
|
* Mapping information for data structures shared
|
|
* between the sequencer and kernel.
|
|
*/
|
|
bus_dma_tag_t parent_dmat;
|
|
bus_dma_tag_t shared_data_dmat;
|
|
struct map_node shared_data_map;
|
|
|
|
/* Information saved through suspend/resume cycles */
|
|
struct ahd_suspend_state suspend_state;
|
|
|
|
/* Number of enabled target mode device on this card */
|
|
u_int enabled_luns;
|
|
|
|
/* Initialization level of this data structure */
|
|
u_int init_level;
|
|
|
|
/* PCI cacheline size. */
|
|
u_int pci_cachesize;
|
|
|
|
/* IO Cell Parameters */
|
|
uint8_t iocell_opts[AHD_NUM_PER_DEV_ANNEXCOLS];
|
|
|
|
u_int stack_size;
|
|
uint16_t *saved_stack;
|
|
|
|
/* Per-Unit descriptive information */
|
|
const char *description;
|
|
const char *bus_description;
|
|
char *name;
|
|
int unit;
|
|
|
|
/* Selection Timer settings */
|
|
int seltime;
|
|
|
|
/*
|
|
* Interrupt coalescing settings.
|
|
*/
|
|
#define AHD_INT_COALESCING_TIMER_DEFAULT 250 /*us*/
|
|
#define AHD_INT_COALESCING_MAXCMDS_DEFAULT 10
|
|
#define AHD_INT_COALESCING_MAXCMDS_MAX 127
|
|
#define AHD_INT_COALESCING_MINCMDS_DEFAULT 5
|
|
#define AHD_INT_COALESCING_MINCMDS_MAX 127
|
|
#define AHD_INT_COALESCING_THRESHOLD_DEFAULT 2000
|
|
#define AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT 1000
|
|
u_int int_coalescing_timer;
|
|
u_int int_coalescing_maxcmds;
|
|
u_int int_coalescing_mincmds;
|
|
u_int int_coalescing_threshold;
|
|
u_int int_coalescing_stop_threshold;
|
|
|
|
uint16_t user_discenable;/* Disconnection allowed */
|
|
uint16_t user_tagenable;/* Tagged Queuing allowed */
|
|
};
|
|
|
|
/*************************** IO Cell Configuration ****************************/
|
|
#define AHD_PRECOMP_SLEW_INDEX \
|
|
(AHD_ANNEXCOL_PRECOMP_SLEW - AHD_ANNEXCOL_PER_DEV0)
|
|
|
|
#define AHD_AMPLITUDE_INDEX \
|
|
(AHD_ANNEXCOL_AMPLITUDE - AHD_ANNEXCOL_PER_DEV0)
|
|
|
|
#define AHD_SET_SLEWRATE(ahd, new_slew) \
|
|
do { \
|
|
(ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_SLEWRATE_MASK; \
|
|
(ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] |= \
|
|
(((new_slew) << AHD_SLEWRATE_SHIFT) & AHD_SLEWRATE_MASK); \
|
|
} while (0)
|
|
|
|
#define AHD_SET_PRECOMP(ahd, new_pcomp) \
|
|
do { \
|
|
(ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; \
|
|
(ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] |= \
|
|
(((new_pcomp) << AHD_PRECOMP_SHIFT) & AHD_PRECOMP_MASK); \
|
|
} while (0)
|
|
|
|
#define AHD_SET_AMPLITUDE(ahd, new_amp) \
|
|
do { \
|
|
(ahd)->iocell_opts[AHD_AMPLITUDE_INDEX] &= ~AHD_AMPLITUDE_MASK; \
|
|
(ahd)->iocell_opts[AHD_AMPLITUDE_INDEX] |= \
|
|
(((new_amp) << AHD_AMPLITUDE_SHIFT) & AHD_AMPLITUDE_MASK); \
|
|
} while (0)
|
|
|
|
/************************ Active Device Information ***************************/
|
|
typedef enum {
|
|
ROLE_UNKNOWN,
|
|
ROLE_INITIATOR,
|
|
ROLE_TARGET
|
|
} role_t;
|
|
|
|
struct ahd_devinfo {
|
|
int our_scsiid;
|
|
int target_offset;
|
|
uint16_t target_mask;
|
|
u_int target;
|
|
u_int lun;
|
|
char channel;
|
|
role_t role; /*
|
|
* Only guaranteed to be correct if not
|
|
* in the busfree state.
|
|
*/
|
|
};
|
|
|
|
/****************************** PCI Structures ********************************/
|
|
#define AHD_PCI_IOADDR0 PCIR_BAR(0) /* I/O BAR*/
|
|
#define AHD_PCI_MEMADDR PCIR_BAR(1) /* Memory BAR */
|
|
#define AHD_PCI_IOADDR1 PCIR_BAR(3) /* Second I/O BAR */
|
|
|
|
typedef int (ahd_device_setup_t)(struct ahd_softc *);
|
|
|
|
struct ahd_pci_identity {
|
|
uint64_t full_id;
|
|
uint64_t id_mask;
|
|
const char *name;
|
|
ahd_device_setup_t *setup;
|
|
};
|
|
|
|
/***************************** VL/EISA Declarations ***************************/
|
|
struct aic7770_identity {
|
|
uint32_t full_id;
|
|
uint32_t id_mask;
|
|
const char *name;
|
|
ahd_device_setup_t *setup;
|
|
};
|
|
extern struct aic7770_identity aic7770_ident_table [];
|
|
extern const int ahd_num_aic7770_devs;
|
|
|
|
#define AHD_EISA_SLOT_OFFSET 0xc00
|
|
#define AHD_EISA_IOSIZE 0x100
|
|
|
|
/*************************** Function Declarations ****************************/
|
|
/******************************************************************************/
|
|
|
|
/***************************** PCI Front End *********************************/
|
|
const struct ahd_pci_identity *ahd_find_pci_device(ahd_dev_softc_t);
|
|
int ahd_pci_config(struct ahd_softc *,
|
|
const struct ahd_pci_identity *);
|
|
int ahd_pci_test_register_access(struct ahd_softc *);
|
|
#ifdef CONFIG_PM
|
|
void ahd_pci_suspend(struct ahd_softc *);
|
|
void ahd_pci_resume(struct ahd_softc *);
|
|
#endif
|
|
|
|
/************************** SCB and SCB queue management **********************/
|
|
void ahd_qinfifo_requeue_tail(struct ahd_softc *ahd,
|
|
struct scb *scb);
|
|
|
|
/****************************** Initialization ********************************/
|
|
struct ahd_softc *ahd_alloc(void *platform_arg, char *name);
|
|
int ahd_softc_init(struct ahd_softc *);
|
|
void ahd_controller_info(struct ahd_softc *ahd, char *buf);
|
|
int ahd_init(struct ahd_softc *ahd);
|
|
#ifdef CONFIG_PM
|
|
int ahd_suspend(struct ahd_softc *ahd);
|
|
void ahd_resume(struct ahd_softc *ahd);
|
|
#endif
|
|
int ahd_default_config(struct ahd_softc *ahd);
|
|
int ahd_parse_vpddata(struct ahd_softc *ahd,
|
|
struct vpd_config *vpd);
|
|
int ahd_parse_cfgdata(struct ahd_softc *ahd,
|
|
struct seeprom_config *sc);
|
|
void ahd_intr_enable(struct ahd_softc *ahd, int enable);
|
|
void ahd_pause_and_flushwork(struct ahd_softc *ahd);
|
|
void ahd_set_unit(struct ahd_softc *, int);
|
|
void ahd_set_name(struct ahd_softc *, char *);
|
|
struct scb *ahd_get_scb(struct ahd_softc *ahd, u_int col_idx);
|
|
void ahd_free_scb(struct ahd_softc *ahd, struct scb *scb);
|
|
void ahd_free(struct ahd_softc *ahd);
|
|
int ahd_reset(struct ahd_softc *ahd, int reinit);
|
|
int ahd_write_flexport(struct ahd_softc *ahd,
|
|
u_int addr, u_int value);
|
|
int ahd_read_flexport(struct ahd_softc *ahd, u_int addr,
|
|
uint8_t *value);
|
|
|
|
/***************************** Error Recovery *********************************/
|
|
typedef enum {
|
|
SEARCH_COMPLETE,
|
|
SEARCH_COUNT,
|
|
SEARCH_REMOVE,
|
|
SEARCH_PRINT
|
|
} ahd_search_action;
|
|
int ahd_search_qinfifo(struct ahd_softc *ahd, int target,
|
|
char channel, int lun, u_int tag,
|
|
role_t role, uint32_t status,
|
|
ahd_search_action action);
|
|
int ahd_search_disc_list(struct ahd_softc *ahd, int target,
|
|
char channel, int lun, u_int tag,
|
|
int stop_on_first, int remove,
|
|
int save_state);
|
|
int ahd_reset_channel(struct ahd_softc *ahd, char channel,
|
|
int initiate_reset);
|
|
/*************************** Utility Functions ********************************/
|
|
void ahd_compile_devinfo(struct ahd_devinfo *devinfo,
|
|
u_int our_id, u_int target,
|
|
u_int lun, char channel,
|
|
role_t role);
|
|
/************************** Transfer Negotiation ******************************/
|
|
void ahd_find_syncrate(struct ahd_softc *ahd, u_int *period,
|
|
u_int *ppr_options, u_int maxsync);
|
|
/*
|
|
* Negotiation types. These are used to qualify if we should renegotiate
|
|
* even if our goal and current transport parameters are identical.
|
|
*/
|
|
typedef enum {
|
|
AHD_NEG_TO_GOAL, /* Renegotiate only if goal and curr differ. */
|
|
AHD_NEG_IF_NON_ASYNC, /* Renegotiate so long as goal is non-async. */
|
|
AHD_NEG_ALWAYS /* Renegotiat even if goal is async. */
|
|
} ahd_neg_type;
|
|
int ahd_update_neg_request(struct ahd_softc*,
|
|
struct ahd_devinfo*,
|
|
struct ahd_tmode_tstate*,
|
|
struct ahd_initiator_tinfo*,
|
|
ahd_neg_type);
|
|
void ahd_set_width(struct ahd_softc *ahd,
|
|
struct ahd_devinfo *devinfo,
|
|
u_int width, u_int type, int paused);
|
|
void ahd_set_syncrate(struct ahd_softc *ahd,
|
|
struct ahd_devinfo *devinfo,
|
|
u_int period, u_int offset,
|
|
u_int ppr_options,
|
|
u_int type, int paused);
|
|
typedef enum {
|
|
AHD_QUEUE_NONE,
|
|
AHD_QUEUE_BASIC,
|
|
AHD_QUEUE_TAGGED
|
|
} ahd_queue_alg;
|
|
|
|
/**************************** Target Mode *************************************/
|
|
#ifdef AHD_TARGET_MODE
|
|
void ahd_send_lstate_events(struct ahd_softc *,
|
|
struct ahd_tmode_lstate *);
|
|
void ahd_handle_en_lun(struct ahd_softc *ahd,
|
|
struct cam_sim *sim, union ccb *ccb);
|
|
cam_status ahd_find_tmode_devs(struct ahd_softc *ahd,
|
|
struct cam_sim *sim, union ccb *ccb,
|
|
struct ahd_tmode_tstate **tstate,
|
|
struct ahd_tmode_lstate **lstate,
|
|
int notfound_failure);
|
|
#ifndef AHD_TMODE_ENABLE
|
|
#define AHD_TMODE_ENABLE 0
|
|
#endif
|
|
#endif
|
|
/******************************* Debug ***************************************/
|
|
#ifdef AHD_DEBUG
|
|
extern uint32_t ahd_debug;
|
|
#define AHD_SHOW_MISC 0x00001
|
|
#define AHD_SHOW_SENSE 0x00002
|
|
#define AHD_SHOW_RECOVERY 0x00004
|
|
#define AHD_DUMP_SEEPROM 0x00008
|
|
#define AHD_SHOW_TERMCTL 0x00010
|
|
#define AHD_SHOW_MEMORY 0x00020
|
|
#define AHD_SHOW_MESSAGES 0x00040
|
|
#define AHD_SHOW_MODEPTR 0x00080
|
|
#define AHD_SHOW_SELTO 0x00100
|
|
#define AHD_SHOW_FIFOS 0x00200
|
|
#define AHD_SHOW_QFULL 0x00400
|
|
#define AHD_SHOW_DV 0x00800
|
|
#define AHD_SHOW_MASKED_ERRORS 0x01000
|
|
#define AHD_SHOW_QUEUE 0x02000
|
|
#define AHD_SHOW_TQIN 0x04000
|
|
#define AHD_SHOW_SG 0x08000
|
|
#define AHD_SHOW_INT_COALESCING 0x10000
|
|
#define AHD_DEBUG_SEQUENCER 0x20000
|
|
#endif
|
|
void ahd_print_devinfo(struct ahd_softc *ahd,
|
|
struct ahd_devinfo *devinfo);
|
|
void ahd_dump_card_state(struct ahd_softc *ahd);
|
|
int ahd_print_register(const ahd_reg_parse_entry_t *table,
|
|
u_int num_entries,
|
|
const char *name,
|
|
u_int address,
|
|
u_int value,
|
|
u_int *cur_column,
|
|
u_int wrap_point);
|
|
#endif /* _AIC79XX_H_ */
|