WSL2-Linux-Kernel/arch/arm/mach-zynq/common.c

120 строки
2.8 KiB
C

/*
* This file contains common code that is intended to be used across
* boards so that it's not replicated.
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/zynq_soc.h>
#include <mach/clkdev.h>
#include "common.h"
static struct of_device_id zynq_of_bus_ids[] __initdata = {
{ .compatible = "simple-bus", },
{}
};
/**
* xilinx_init_machine() - System specific initialization, intended to be
* called from board specific initialization.
*/
static void __init xilinx_init_machine(void)
{
#ifdef CONFIG_CACHE_L2X0
/*
* 64KB way size, 8-way associativity, parity disabled
*/
l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF);
#endif
of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
}
/**
* xilinx_irq_init() - Interrupt controller initialization for the GIC.
*/
static void __init xilinx_irq_init(void)
{
gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
}
/* The minimum devices needed to be mapped before the VM system is up and
* running include the GIC, UART and Timer Counter.
*/
static struct map_desc io_desc[] __initdata = {
{
.virtual = TTC0_VIRT,
.pfn = __phys_to_pfn(TTC0_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = SCU_PERIPH_VIRT,
.pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = PL310_L2CC_VIRT,
.pfn = __phys_to_pfn(PL310_L2CC_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = UART0_VIRT,
.pfn = __phys_to_pfn(UART0_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
/**
* xilinx_map_io() - Create memory mappings needed for early I/O.
*/
static void __init xilinx_map_io(void)
{
iotable_init(io_desc, ARRAY_SIZE(io_desc));
}
static const char *xilinx_dt_match[] = {
"xlnx,zynq-ep107",
NULL
};
MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
.map_io = xilinx_map_io,
.init_irq = xilinx_irq_init,
.handle_irq = gic_handle_irq,
.init_machine = xilinx_init_machine,
.timer = &xttcpss_sys_timer,
.dt_compat = xilinx_dt_match,
MACHINE_END