634 строки
14 KiB
C
634 строки
14 KiB
C
/*
|
|
* AD5446 SPI DAC driver
|
|
*
|
|
* Copyright 2010 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/list.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define MODE_PWRDWN_1k 0x1
|
|
#define MODE_PWRDWN_100k 0x2
|
|
#define MODE_PWRDWN_TRISTATE 0x3
|
|
|
|
/**
|
|
* struct ad5446_state - driver instance specific data
|
|
* @spi: spi_device
|
|
* @chip_info: chip model specific constants, available modes etc
|
|
* @reg: supply regulator
|
|
* @vref_mv: actual reference voltage used
|
|
*/
|
|
|
|
struct ad5446_state {
|
|
struct device *dev;
|
|
const struct ad5446_chip_info *chip_info;
|
|
struct regulator *reg;
|
|
unsigned short vref_mv;
|
|
unsigned cached_val;
|
|
unsigned pwr_down_mode;
|
|
unsigned pwr_down;
|
|
};
|
|
|
|
/**
|
|
* struct ad5446_chip_info - chip specific information
|
|
* @channel: channel spec for the DAC
|
|
* @int_vref_mv: AD5620/40/60: the internal reference voltage
|
|
* @write: chip specific helper function to write to the register
|
|
*/
|
|
|
|
struct ad5446_chip_info {
|
|
struct iio_chan_spec channel;
|
|
u16 int_vref_mv;
|
|
int (*write)(struct ad5446_state *st, unsigned val);
|
|
};
|
|
|
|
static const char * const ad5446_powerdown_modes[] = {
|
|
"1kohm_to_gnd", "100kohm_to_gnd", "three_state"
|
|
};
|
|
|
|
static int ad5446_set_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, unsigned int mode)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
st->pwr_down_mode = mode + 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad5446_get_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
return st->pwr_down_mode - 1;
|
|
}
|
|
|
|
static const struct iio_enum ad5446_powerdown_mode_enum = {
|
|
.items = ad5446_powerdown_modes,
|
|
.num_items = ARRAY_SIZE(ad5446_powerdown_modes),
|
|
.get = ad5446_get_powerdown_mode,
|
|
.set = ad5446_set_powerdown_mode,
|
|
};
|
|
|
|
static ssize_t ad5446_read_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
char *buf)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n", st->pwr_down);
|
|
}
|
|
|
|
static ssize_t ad5446_write_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
unsigned int shift;
|
|
unsigned int val;
|
|
bool powerdown;
|
|
int ret;
|
|
|
|
ret = strtobool(buf, &powerdown);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
st->pwr_down = powerdown;
|
|
|
|
if (st->pwr_down) {
|
|
shift = chan->scan_type.realbits + chan->scan_type.shift;
|
|
val = st->pwr_down_mode << shift;
|
|
} else {
|
|
val = st->cached_val;
|
|
}
|
|
|
|
ret = st->chip_info->write(st, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info ad5446_ext_info_powerdown[] = {
|
|
{
|
|
.name = "powerdown",
|
|
.read = ad5446_read_dac_powerdown,
|
|
.write = ad5446_write_dac_powerdown,
|
|
.shared = IIO_SEPARATE,
|
|
},
|
|
IIO_ENUM("powerdown_mode", IIO_SEPARATE, &ad5446_powerdown_mode_enum),
|
|
IIO_ENUM_AVAILABLE("powerdown_mode", &ad5446_powerdown_mode_enum),
|
|
{ },
|
|
};
|
|
|
|
#define _AD5446_CHANNEL(bits, storage, _shift, ext) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.output = 1, \
|
|
.channel = 0, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = (bits), \
|
|
.storagebits = (storage), \
|
|
.shift = (_shift), \
|
|
}, \
|
|
.ext_info = (ext), \
|
|
}
|
|
|
|
#define AD5446_CHANNEL(bits, storage, shift) \
|
|
_AD5446_CHANNEL(bits, storage, shift, NULL)
|
|
|
|
#define AD5446_CHANNEL_POWERDOWN(bits, storage, shift) \
|
|
_AD5446_CHANNEL(bits, storage, shift, ad5446_ext_info_powerdown)
|
|
|
|
static int ad5446_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
*val = st->cached_val;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = st->vref_mv;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ad5446_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
int ret = 0;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (val >= (1 << chan->scan_type.realbits) || val < 0)
|
|
return -EINVAL;
|
|
|
|
val <<= chan->scan_type.shift;
|
|
mutex_lock(&indio_dev->mlock);
|
|
st->cached_val = val;
|
|
if (!st->pwr_down)
|
|
ret = st->chip_info->write(st, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info ad5446_info = {
|
|
.read_raw = ad5446_read_raw,
|
|
.write_raw = ad5446_write_raw,
|
|
};
|
|
|
|
static int ad5446_probe(struct device *dev, const char *name,
|
|
const struct ad5446_chip_info *chip_info)
|
|
{
|
|
struct ad5446_state *st;
|
|
struct iio_dev *indio_dev;
|
|
struct regulator *reg;
|
|
int ret, voltage_uv = 0;
|
|
|
|
reg = devm_regulator_get(dev, "vcc");
|
|
if (!IS_ERR(reg)) {
|
|
ret = regulator_enable(reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_get_voltage(reg);
|
|
if (ret < 0)
|
|
goto error_disable_reg;
|
|
|
|
voltage_uv = ret;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
|
|
if (indio_dev == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_disable_reg;
|
|
}
|
|
st = iio_priv(indio_dev);
|
|
st->chip_info = chip_info;
|
|
|
|
dev_set_drvdata(dev, indio_dev);
|
|
st->reg = reg;
|
|
st->dev = dev;
|
|
|
|
/* Establish that the iio_dev is a child of the device */
|
|
indio_dev->dev.parent = dev;
|
|
indio_dev->name = name;
|
|
indio_dev->info = &ad5446_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = &st->chip_info->channel;
|
|
indio_dev->num_channels = 1;
|
|
|
|
st->pwr_down_mode = MODE_PWRDWN_1k;
|
|
|
|
if (st->chip_info->int_vref_mv)
|
|
st->vref_mv = st->chip_info->int_vref_mv;
|
|
else if (voltage_uv)
|
|
st->vref_mv = voltage_uv / 1000;
|
|
else
|
|
dev_warn(dev, "reference voltage unspecified\n");
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
return 0;
|
|
|
|
error_disable_reg:
|
|
if (!IS_ERR(reg))
|
|
regulator_disable(reg);
|
|
return ret;
|
|
}
|
|
|
|
static int ad5446_remove(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_SPI_MASTER)
|
|
|
|
static int ad5446_write(struct ad5446_state *st, unsigned val)
|
|
{
|
|
struct spi_device *spi = to_spi_device(st->dev);
|
|
__be16 data = cpu_to_be16(val);
|
|
|
|
return spi_write(spi, &data, sizeof(data));
|
|
}
|
|
|
|
static int ad5660_write(struct ad5446_state *st, unsigned val)
|
|
{
|
|
struct spi_device *spi = to_spi_device(st->dev);
|
|
uint8_t data[3];
|
|
|
|
data[0] = (val >> 16) & 0xFF;
|
|
data[1] = (val >> 8) & 0xFF;
|
|
data[2] = val & 0xFF;
|
|
|
|
return spi_write(spi, data, sizeof(data));
|
|
}
|
|
|
|
/**
|
|
* ad5446_supported_spi_device_ids:
|
|
* The AD5620/40/60 parts are available in different fixed internal reference
|
|
* voltage options. The actual part numbers may look differently
|
|
* (and a bit cryptic), however this style is used to make clear which
|
|
* parts are supported here.
|
|
*/
|
|
enum ad5446_supported_spi_device_ids {
|
|
ID_AD5300,
|
|
ID_AD5310,
|
|
ID_AD5320,
|
|
ID_AD5444,
|
|
ID_AD5446,
|
|
ID_AD5450,
|
|
ID_AD5451,
|
|
ID_AD5541A,
|
|
ID_AD5512A,
|
|
ID_AD5553,
|
|
ID_AD5601,
|
|
ID_AD5611,
|
|
ID_AD5621,
|
|
ID_AD5641,
|
|
ID_AD5620_2500,
|
|
ID_AD5620_1250,
|
|
ID_AD5640_2500,
|
|
ID_AD5640_1250,
|
|
ID_AD5660_2500,
|
|
ID_AD5660_1250,
|
|
ID_AD5662,
|
|
};
|
|
|
|
static const struct ad5446_chip_info ad5446_spi_chip_info[] = {
|
|
[ID_AD5300] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5310] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5320] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5444] = {
|
|
.channel = AD5446_CHANNEL(12, 16, 2),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5446] = {
|
|
.channel = AD5446_CHANNEL(14, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5450] = {
|
|
.channel = AD5446_CHANNEL(8, 16, 6),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5451] = {
|
|
.channel = AD5446_CHANNEL(10, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5541A] = {
|
|
.channel = AD5446_CHANNEL(16, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5512A] = {
|
|
.channel = AD5446_CHANNEL(12, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5553] = {
|
|
.channel = AD5446_CHANNEL(14, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5601] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5611] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5621] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5641] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5620_2500] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
|
|
.int_vref_mv = 2500,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5620_1250] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
|
|
.int_vref_mv = 1250,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5640_2500] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
|
|
.int_vref_mv = 2500,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5640_1250] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
|
|
.int_vref_mv = 1250,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5660_2500] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
|
|
.int_vref_mv = 2500,
|
|
.write = ad5660_write,
|
|
},
|
|
[ID_AD5660_1250] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
|
|
.int_vref_mv = 1250,
|
|
.write = ad5660_write,
|
|
},
|
|
[ID_AD5662] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
|
|
.write = ad5660_write,
|
|
},
|
|
};
|
|
|
|
static const struct spi_device_id ad5446_spi_ids[] = {
|
|
{"ad5300", ID_AD5300},
|
|
{"ad5310", ID_AD5310},
|
|
{"ad5320", ID_AD5320},
|
|
{"ad5444", ID_AD5444},
|
|
{"ad5446", ID_AD5446},
|
|
{"ad5450", ID_AD5450},
|
|
{"ad5451", ID_AD5451},
|
|
{"ad5452", ID_AD5444}, /* ad5452 is compatible to the ad5444 */
|
|
{"ad5453", ID_AD5446}, /* ad5453 is compatible to the ad5446 */
|
|
{"ad5512a", ID_AD5512A},
|
|
{"ad5541a", ID_AD5541A},
|
|
{"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */
|
|
{"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */
|
|
{"ad5553", ID_AD5553},
|
|
{"ad5601", ID_AD5601},
|
|
{"ad5611", ID_AD5611},
|
|
{"ad5621", ID_AD5621},
|
|
{"ad5641", ID_AD5641},
|
|
{"ad5620-2500", ID_AD5620_2500}, /* AD5620/40/60: */
|
|
{"ad5620-1250", ID_AD5620_1250}, /* part numbers may look differently */
|
|
{"ad5640-2500", ID_AD5640_2500},
|
|
{"ad5640-1250", ID_AD5640_1250},
|
|
{"ad5660-2500", ID_AD5660_2500},
|
|
{"ad5660-1250", ID_AD5660_1250},
|
|
{"ad5662", ID_AD5662},
|
|
{"dac081s101", ID_AD5300}, /* compatible Texas Instruments chips */
|
|
{"dac101s101", ID_AD5310},
|
|
{"dac121s101", ID_AD5320},
|
|
{"dac7512", ID_AD5320},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad5446_spi_ids);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id ad5446_of_ids[] = {
|
|
{ .compatible = "ti,dac7512" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ad5446_of_ids);
|
|
#endif
|
|
|
|
static int ad5446_spi_probe(struct spi_device *spi)
|
|
{
|
|
const struct spi_device_id *id = spi_get_device_id(spi);
|
|
|
|
return ad5446_probe(&spi->dev, id->name,
|
|
&ad5446_spi_chip_info[id->driver_data]);
|
|
}
|
|
|
|
static int ad5446_spi_remove(struct spi_device *spi)
|
|
{
|
|
return ad5446_remove(&spi->dev);
|
|
}
|
|
|
|
static struct spi_driver ad5446_spi_driver = {
|
|
.driver = {
|
|
.name = "ad5446",
|
|
.of_match_table = of_match_ptr(ad5446_of_ids),
|
|
},
|
|
.probe = ad5446_spi_probe,
|
|
.remove = ad5446_spi_remove,
|
|
.id_table = ad5446_spi_ids,
|
|
};
|
|
|
|
static int __init ad5446_spi_register_driver(void)
|
|
{
|
|
return spi_register_driver(&ad5446_spi_driver);
|
|
}
|
|
|
|
static void ad5446_spi_unregister_driver(void)
|
|
{
|
|
spi_unregister_driver(&ad5446_spi_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int ad5446_spi_register_driver(void) { return 0; }
|
|
static inline void ad5446_spi_unregister_driver(void) { }
|
|
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int ad5622_write(struct ad5446_state *st, unsigned val)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(st->dev);
|
|
__be16 data = cpu_to_be16(val);
|
|
|
|
return i2c_master_send(client, (char *)&data, sizeof(data));
|
|
}
|
|
|
|
/**
|
|
* ad5446_supported_i2c_device_ids:
|
|
* The AD5620/40/60 parts are available in different fixed internal reference
|
|
* voltage options. The actual part numbers may look differently
|
|
* (and a bit cryptic), however this style is used to make clear which
|
|
* parts are supported here.
|
|
*/
|
|
enum ad5446_supported_i2c_device_ids {
|
|
ID_AD5602,
|
|
ID_AD5612,
|
|
ID_AD5622,
|
|
};
|
|
|
|
static const struct ad5446_chip_info ad5446_i2c_chip_info[] = {
|
|
[ID_AD5602] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
|
|
.write = ad5622_write,
|
|
},
|
|
[ID_AD5612] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
|
|
.write = ad5622_write,
|
|
},
|
|
[ID_AD5622] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
|
|
.write = ad5622_write,
|
|
},
|
|
};
|
|
|
|
static int ad5446_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
return ad5446_probe(&i2c->dev, id->name,
|
|
&ad5446_i2c_chip_info[id->driver_data]);
|
|
}
|
|
|
|
static int ad5446_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
return ad5446_remove(&i2c->dev);
|
|
}
|
|
|
|
static const struct i2c_device_id ad5446_i2c_ids[] = {
|
|
{"ad5301", ID_AD5602},
|
|
{"ad5311", ID_AD5612},
|
|
{"ad5321", ID_AD5622},
|
|
{"ad5602", ID_AD5602},
|
|
{"ad5612", ID_AD5612},
|
|
{"ad5622", ID_AD5622},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ad5446_i2c_ids);
|
|
|
|
static struct i2c_driver ad5446_i2c_driver = {
|
|
.driver = {
|
|
.name = "ad5446",
|
|
},
|
|
.probe = ad5446_i2c_probe,
|
|
.remove = ad5446_i2c_remove,
|
|
.id_table = ad5446_i2c_ids,
|
|
};
|
|
|
|
static int __init ad5446_i2c_register_driver(void)
|
|
{
|
|
return i2c_add_driver(&ad5446_i2c_driver);
|
|
}
|
|
|
|
static void __exit ad5446_i2c_unregister_driver(void)
|
|
{
|
|
i2c_del_driver(&ad5446_i2c_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int ad5446_i2c_register_driver(void) { return 0; }
|
|
static inline void ad5446_i2c_unregister_driver(void) { }
|
|
|
|
#endif
|
|
|
|
static int __init ad5446_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = ad5446_spi_register_driver();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ad5446_i2c_register_driver();
|
|
if (ret) {
|
|
ad5446_spi_unregister_driver();
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(ad5446_init);
|
|
|
|
static void __exit ad5446_exit(void)
|
|
{
|
|
ad5446_i2c_unregister_driver();
|
|
ad5446_spi_unregister_driver();
|
|
}
|
|
module_exit(ad5446_exit);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD5444/AD5446 DAC");
|
|
MODULE_LICENSE("GPL v2");
|