WSL2-Linux-Kernel/drivers/tty/serial
Joe Schultz 45a7bd6359 serial: 8250: Support XR17V35x fraction divisor
The Exar XR17V35x family of UARTs have an additional fractional divisor
register (DLD) which was not being used. Calculate and set this
register for these devices to reduce their baud rate error.

Signed-off-by: Joe Schultz <jschultz@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13 10:02:19 -08:00
..
8250 serial: 8250: Support XR17V35x fraction divisor 2014-02-13 10:02:19 -08:00
cpm_uart tty: delete non-required instances of include <linux/init.h> 2014-01-07 17:05:21 -08:00
jsm
21285.c
68328serial.c
Kconfig ARM: driver updates for 3.14 2014-01-23 18:49:36 -08:00
Makefile serial: Remove old SC26XX driver 2013-12-19 12:34:30 -08:00
altera_jtaguart.c ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
altera_uart.c ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
amba-pl010.c serial: pl010: Convert to modern PM ops 2013-12-08 17:09:07 -08:00
amba-pl011.c serial: pl011: fix fall back from DMA to interrupt mode 2013-12-17 09:36:23 -08:00
apbuart.c tty: serial: apbuart: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:33 -07:00
apbuart.h
ar933x_uart.c tty: ar933x_uart: add device tree support and binding documentation 2013-08-30 14:11:27 -07:00
arc_uart.c serial: arc_uart: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
atmel_serial.c tty/serial: at91: disable uart timer at start of shutdown 2014-01-13 15:55:59 -08:00
bcm63xx_uart.c tty: serial: bcm63xx_uart: use linux/serial_bcm63xx.h 2014-01-23 13:02:36 +01:00
bfin_sport_uart.c serial: bfin_sport_uart: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
bfin_sport_uart.h
bfin_uart.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
clps711x.c serial: clps711x: Enable driver compilation with COMPILE_TEST 2014-01-07 17:06:18 -08:00
crisv10.c treewide: fix comments and printk msgs 2014-01-07 15:06:07 +01:00
crisv10.h
dz.c
dz.h
efm32-uart.c tty: serial: efm32: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
fsl_lpuart.c
icom.c serial: icom: dereference after free in load_code() 2013-12-08 17:16:05 -08:00
icom.h
ifx6x60.c serial: ifx6x60: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
ifx6x60.h
imx.c serial: imx: add support for loopback mode. 2013-12-08 17:09:07 -08:00
ioc3_serial.c
ioc4_serial.c serial: ioc4_serial: Staticize ioc4_serial_attach_one() 2013-08-12 11:35:32 -07:00
ip22zilog.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
ip22zilog.h
kgdb_nmi.c tty: delete non-required instances of include <linux/init.h> 2014-01-07 17:05:21 -08:00
kgdboc.c treewide: Convert retrun typos to return 2013-09-04 12:26:36 +02:00
lantiq.c serial: MIPS: lantiq: fix clock error check 2013-08-12 11:37:48 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
m32r_sio.c tty: serial: m32r_sio: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
m32r_sio.h
m32r_sio_reg.h
max310x.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
max3100.c
mcf.c tty: serial: mcf: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
mfd.c serial: mfd: Staticize local symbols 2013-10-29 16:34:11 -07:00
mpc52xx_uart.c serial: mpc512x: setup the PSC FIFO clock as well 2014-01-12 18:53:05 +01:00
mpsc.c serial: mpsc: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
mrst_max3110.c mrst_max3110: fix unbalanced IRQ issue during resume 2013-10-29 16:26:54 -07:00
mrst_max3110.h
msm_serial.c msm_serial: Send more than 1 character on the console w/ UARTDM 2013-08-27 16:22:59 -07:00
msm_serial.h
msm_serial_hs.c
msm_smd_tty.c
mux.c
mxs-auart.c tty: serial: mxs-auart: Check the return value from clk_prepare_enable() 2013-12-08 17:14:58 -08:00
netx-serial.c tty: serial: netx: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
nwpserial.c tty: serial: nwpserial: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:35 -07:00
of_serial.c tty: delete non-required instances of include <linux/init.h> 2014-01-07 17:05:21 -08:00
omap-serial.c serial: omap: fix rs485 probe on defered pinctrl 2014-02-13 09:57:33 -08:00
pch_uart.c Merge branch 'fixes' into tty-next 2014-01-22 13:42:19 -08:00
pmac_zilog.c TTY: pmac_zilog, check existence of ports in pmz_console_init() 2013-11-25 08:54:25 -08:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: pnx8xxx: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:35 -07:00
pxa.c serial: pxa: Staticize local symbols 2013-08-12 11:10:16 -07:00
rp2.c tty: remove DEFINE_PCI_DEVICE_TABLE macro 2013-12-08 17:09:07 -08:00
sa1100.c serial: sa1100: delete .set_wake callback 2013-10-16 13:16:18 -07:00
samsung.c serial: samsung: move clock deactivation below uart registration 2013-12-08 17:16:05 -08:00
samsung.h serial: samsung: Remove casting the return value which is a void pointer 2013-09-26 14:29:59 -07:00
sb1250-duart.c
sccnxp.c serial: sccnxp: missing uart_unregister_driver() on error in sccnxp_probe() 2013-09-26 15:44:45 -07:00
serial-tegra.c serial: tegra: convert to standard DMA DT bindings 2013-12-11 16:44:35 -07:00
serial_core.c serial_core: Don't re-initialize a previously initialized spinlock. 2013-12-08 16:44:21 -08:00
serial_ks8695.c
serial_txx9.c serial: txx9: remove unnecessary pci_set_drvdata() 2013-09-26 15:41:38 -07:00
sh-sci.c serial: sh-sci: Add OF support 2013-12-24 21:50:54 +09:00
sh-sci.h serial: sh-sci: Move overrun_bit and error_mask fields out of pdata 2013-12-24 11:17:48 +09:00
sirfsoc_uart.c serial: sirf: fix kernel panic caused by unpaired spinlock 2014-02-13 10:02:19 -08:00
sirfsoc_uart.h serial: sirf: remove duplicate defines 2013-10-29 16:26:54 -07:00
sn_console.c
st-asc.c serial: st-asc: remove unnecessary platform_set_drvdata() 2013-08-27 16:24:33 -07:00
suncore.c
sunhv.c
sunsab.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
sunsab.h
sunsu.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
sunzilog.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
sunzilog.h
tilegx.c tilegx: Add tty serial support for TILE-Gx on-chip UART 2013-09-03 14:50:40 -04:00
timbuart.c serial: timbuart: Staticize local symbols 2013-08-12 11:35:31 -07:00
timbuart.h
uartlite.c
ucc_uart.c DeviceTree updates for 3.13. This is a bit larger pull request than 2013-11-12 16:52:17 +09:00
vr41xx_siu.c
vt8500_serial.c serial: vt8500: add missing braces 2013-10-16 13:22:16 -07:00
xilinx_uartps.c tty: xuartps: Properly guard sysrq specific code 2013-12-17 16:02:25 -08:00
zs.c
zs.h