427 строки
11 KiB
C
427 строки
11 KiB
C
/*
|
|
* Copyright (C) 2013 BayHub Technology Ltd.
|
|
*
|
|
* Authors: Peter Guo <peter.guo@bayhubtech.com>
|
|
* Adam Lee <adam.lee@canonical.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include "sdhci.h"
|
|
#include "sdhci-pci.h"
|
|
|
|
/*
|
|
* O2Micro device registers
|
|
*/
|
|
|
|
#define O2_SD_MISC_REG5 0x64
|
|
#define O2_SD_LD0_CTRL 0x68
|
|
#define O2_SD_DEV_CTRL 0x88
|
|
#define O2_SD_LOCK_WP 0xD3
|
|
#define O2_SD_TEST_REG 0xD4
|
|
#define O2_SD_FUNC_REG0 0xDC
|
|
#define O2_SD_MULTI_VCC3V 0xEE
|
|
#define O2_SD_CLKREQ 0xEC
|
|
#define O2_SD_CAPS 0xE0
|
|
#define O2_SD_ADMA1 0xE2
|
|
#define O2_SD_ADMA2 0xE7
|
|
#define O2_SD_INF_MOD 0xF1
|
|
#define O2_SD_MISC_CTRL4 0xFC
|
|
#define O2_SD_TUNING_CTRL 0x300
|
|
#define O2_SD_PLL_SETTING 0x304
|
|
#define O2_SD_CLK_SETTING 0x328
|
|
#define O2_SD_CAP_REG2 0x330
|
|
#define O2_SD_CAP_REG0 0x334
|
|
#define O2_SD_UHS1_CAP_SETTING 0x33C
|
|
#define O2_SD_DELAY_CTRL 0x350
|
|
#define O2_SD_UHS2_L1_CTRL 0x35C
|
|
#define O2_SD_FUNC_REG3 0x3E0
|
|
#define O2_SD_FUNC_REG4 0x3E4
|
|
#define O2_SD_LED_ENABLE BIT(6)
|
|
#define O2_SD_FREG0_LEDOFF BIT(13)
|
|
#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22)
|
|
|
|
#define O2_SD_VENDOR_SETTING 0x110
|
|
#define O2_SD_VENDOR_SETTING2 0x1C8
|
|
|
|
static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
|
|
{
|
|
u32 scratch_32;
|
|
pci_read_config_dword(chip->pdev,
|
|
O2_SD_PLL_SETTING, &scratch_32);
|
|
|
|
scratch_32 &= 0x0000FFFF;
|
|
scratch_32 |= value;
|
|
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_PLL_SETTING, scratch_32);
|
|
}
|
|
|
|
static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
|
|
{
|
|
int ret;
|
|
u32 scratch_32;
|
|
|
|
/* Set led of SD host function enable */
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_FUNC_REG0, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
|
|
scratch_32 &= ~O2_SD_FREG0_LEDOFF;
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_FUNC_REG0, scratch_32);
|
|
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_TEST_REG, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
|
|
scratch_32 |= O2_SD_LED_ENABLE;
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_TEST_REG, scratch_32);
|
|
|
|
}
|
|
|
|
static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
|
|
{
|
|
u32 scratch_32;
|
|
int ret;
|
|
/* Improve write performance for SD3.0 */
|
|
ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
|
|
pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
|
|
|
|
/* Enable Link abnormal reset generating Reset */
|
|
ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~((1 << 19) | (1 << 11));
|
|
scratch_32 |= (1 << 10);
|
|
pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
|
|
|
|
/* set card power over current protection */
|
|
ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 |= (1 << 4);
|
|
pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
|
|
|
|
/* adjust the output delay for SD mode */
|
|
pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
|
|
|
|
/* Set the output voltage setting of Aux 1.2v LDO */
|
|
ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~(3 << 12);
|
|
pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
|
|
|
|
/* Set Max power supply capability of SD host */
|
|
ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~(0x01FE);
|
|
scratch_32 |= 0x00CC;
|
|
pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
|
|
/* Set DLL Tuning Window */
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_TUNING_CTRL, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~(0x000000FF);
|
|
scratch_32 |= 0x00000066;
|
|
pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
|
|
|
|
/* Set UHS2 T_EIDLE */
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_UHS2_L1_CTRL, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~(0x000000FC);
|
|
scratch_32 |= 0x00000084;
|
|
pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
|
|
|
|
/* Set UHS2 Termination */
|
|
ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~((1 << 21) | (1 << 30));
|
|
|
|
pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
|
|
|
|
/* Set L1 Entrance Timer */
|
|
ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~(0xf0000000);
|
|
scratch_32 |= 0x30000000;
|
|
pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
|
|
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_MISC_CTRL4, &scratch_32);
|
|
if (ret)
|
|
return;
|
|
scratch_32 &= ~(0x000f0000);
|
|
scratch_32 |= 0x00080000;
|
|
pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
|
|
}
|
|
|
|
int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct sdhci_pci_chip *chip;
|
|
struct sdhci_host *host;
|
|
u32 reg;
|
|
|
|
chip = slot->chip;
|
|
host = slot->host;
|
|
switch (chip->pdev->device) {
|
|
case PCI_DEVICE_ID_O2_SDS0:
|
|
case PCI_DEVICE_ID_O2_SEABIRD0:
|
|
case PCI_DEVICE_ID_O2_SEABIRD1:
|
|
case PCI_DEVICE_ID_O2_SDS1:
|
|
case PCI_DEVICE_ID_O2_FUJIN2:
|
|
reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
|
|
if (reg & 0x1)
|
|
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
|
|
|
|
if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
|
|
break;
|
|
/* set dll watch dog timer */
|
|
reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
|
|
reg |= (1 << 12);
|
|
sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
|
|
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
|
|
{
|
|
int ret;
|
|
u8 scratch;
|
|
u32 scratch_32;
|
|
|
|
switch (chip->pdev->device) {
|
|
case PCI_DEVICE_ID_O2_8220:
|
|
case PCI_DEVICE_ID_O2_8221:
|
|
case PCI_DEVICE_ID_O2_8320:
|
|
case PCI_DEVICE_ID_O2_8321:
|
|
/* This extra setup is required due to broken ADMA. */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch &= 0x7f;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
|
|
/* Set Multi 3 to VCC3V# */
|
|
pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
|
|
|
|
/* Disable CLK_REQ# support after media DET */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_CLKREQ, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x20;
|
|
pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
|
|
|
|
/* Choose capabilities, enable SDMA. We have to write 0x01
|
|
* to the capabilities register first to unlock it.
|
|
*/
|
|
ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x01;
|
|
pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
|
|
pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
|
|
|
|
/* Disable ADMA1/2 */
|
|
pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
|
|
pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
|
|
|
|
/* Disable the infinite transfer mode */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_INF_MOD, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x08;
|
|
pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
|
|
|
|
/* Lock WP */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x80;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
break;
|
|
case PCI_DEVICE_ID_O2_SDS0:
|
|
case PCI_DEVICE_ID_O2_SDS1:
|
|
case PCI_DEVICE_ID_O2_FUJIN2:
|
|
/* UnLock WP */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scratch &= 0x7f;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
|
|
/* DevId=8520 subId= 0x11 or 0x12 Type Chip support */
|
|
if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_FUNC_REG0,
|
|
&scratch_32);
|
|
scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
|
|
|
|
/* Check Whether subId is 0x11 or 0x12 */
|
|
if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
|
|
scratch_32 = 0x2c280000;
|
|
|
|
/* Set Base Clock to 208MZ */
|
|
o2_pci_set_baseclk(chip, scratch_32);
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_FUNC_REG4,
|
|
&scratch_32);
|
|
|
|
/* Enable Base Clk setting change */
|
|
scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_FUNC_REG4,
|
|
scratch_32);
|
|
|
|
/* Set Tuning Window to 4 */
|
|
pci_write_config_byte(chip->pdev,
|
|
O2_SD_TUNING_CTRL, 0x44);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Enable 8520 led function */
|
|
o2_pci_led_enable(chip);
|
|
|
|
/* Set timeout CLK */
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_CLK_SETTING, &scratch_32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scratch_32 &= ~(0xFF00);
|
|
scratch_32 |= 0x07E0C800;
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_CLK_SETTING, scratch_32);
|
|
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_CLKREQ, &scratch_32);
|
|
if (ret)
|
|
return ret;
|
|
scratch_32 |= 0x3;
|
|
pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
|
|
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_PLL_SETTING, &scratch_32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scratch_32 &= ~(0x1F3F070E);
|
|
scratch_32 |= 0x18270106;
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_PLL_SETTING, scratch_32);
|
|
|
|
/* Disable UHS1 funciton */
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_CAP_REG2, &scratch_32);
|
|
if (ret)
|
|
return ret;
|
|
scratch_32 &= ~(0xE0);
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_CAP_REG2, scratch_32);
|
|
|
|
if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
|
|
sdhci_pci_o2_fujin2_pci_init(chip);
|
|
|
|
/* Lock WP */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x80;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
break;
|
|
case PCI_DEVICE_ID_O2_SEABIRD0:
|
|
case PCI_DEVICE_ID_O2_SEABIRD1:
|
|
/* UnLock WP */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scratch &= 0x7f;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_PLL_SETTING, &scratch_32);
|
|
|
|
if ((scratch_32 & 0xff000000) == 0x01000000) {
|
|
scratch_32 &= 0x0000FFFF;
|
|
scratch_32 |= 0x1F340000;
|
|
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_PLL_SETTING, scratch_32);
|
|
} else {
|
|
scratch_32 &= 0x0000FFFF;
|
|
scratch_32 |= 0x2c280000;
|
|
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_PLL_SETTING, scratch_32);
|
|
|
|
ret = pci_read_config_dword(chip->pdev,
|
|
O2_SD_FUNC_REG4,
|
|
&scratch_32);
|
|
scratch_32 |= (1 << 22);
|
|
pci_write_config_dword(chip->pdev,
|
|
O2_SD_FUNC_REG4, scratch_32);
|
|
}
|
|
|
|
/* Set Tuning Windows to 5 */
|
|
pci_write_config_byte(chip->pdev,
|
|
O2_SD_TUNING_CTRL, 0x55);
|
|
/* Lock WP */
|
|
ret = pci_read_config_byte(chip->pdev,
|
|
O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x80;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
|
|
{
|
|
sdhci_pci_o2_probe(chip);
|
|
return sdhci_pci_resume_host(chip);
|
|
}
|
|
#endif
|